hello ppl!
i have a G3 wizard, CID and SIM unlocked - special thanks go to: Dr Puttingham, faria, machinagod, zabardast_1, its right, and all the others that contributed with their post to my actual wm knowledge -
back to subject, two days ago i've got my first ppc - a wizard, and after reading countless of (partial)unusefull stuff, and some stickyes i've managed to unlock it (it had german language), downgrade it, and flash it.. the thing is that - after t-mobile (2.26) i tried to make a backup on the sd card using mtty1[1].42, and then i put in it the latest tnt rom (pro) - everything works flawless, except the sd card. in bootloader it asks me to press the green (call) key to restore, but i don't need to, i will just stick to the tnt rom, so the backup on the card is not needed no more, but i can't access it, format it (if possible from wizard - don't have a card reader a.t.m.), .. so here comes my question: is there a way to format it / make it accessible again (the mini sd card) ?
normally, i wouldn't care, but it's a 2gb one :|
if the answer is somewhere on this forum, please give me directions, i've already read most threads (from start to end) in every topic/category, so i don't mind another one, thank you!
hope you understand my english, and also i hope someone will answer.
solved
problem solved using card reader -> format.
now i'm angry for starting a thread for such a "situation".
someone please close it, or delete it, 10x.
Related
Hey Button...
How are you doing?
Well I got this Qtek 9100 few days ago and I tried to first backup my rom in my mini Sd card using your util wizBackup before using the newest room you made.
But the thing is I cannot see the mini Sd from the explorer anymore....
What should I do to see it again?
By the way do you know how to solve this activesync problem? I had to enable the IP settings for the PocketPc connection in order to make it work (despite of some windows error msgs after the connection), but then if I disconect and reconect again it will not work anymore.
Sorry by the length.
Thanks in advance
What should I do to see it again?
Click to expand...
Click to collapse
Now you should format SD card :wink:
searching for wizBackup
I'm going to upgrade my ROM to the new one provided by Orange Entreprise.
I search for wizBackup, but didn't find it. Can anyone upload wizBackup or similar software and give me the URL please?
thanx,
Sina
Hi All!
I have the same problem: after using wizBackup I cannot see the mini SD anymore.
Formatting is impossible because card is not recognized by none of the programs which I try (ie: Pocket Mechanic, flash format...)
But I'v noticed when I insert or remove SD my QTEK is waking up but still card is not recognized properly :/
Any suggestions and help?
(sorry for my English)
Make mini SD visible again after using Wizbackup Tool!!
I had the same problem after the back up...
No tools that could make my SD card visible again, until I found this little tool!!!
With this tool you can use your Wizard like a USB memory stick and then you can format it again with your desktop Windows.
Just install and connect the Wizard with the USB and format!!!
Good luck!
Wow!!!
THX a lot Marvie. Your solution is working!
I know WM Storage, but not this way
Everything is ok now, thanks once more.
If You came to Warsaw/Poland - let me know, I own You a few beers
This method didn't work with my card but I've found better solution - just insert your card to SD adapter and then to photocamera and format it from this device. Works 100%
EDIT : - 17th December 2007
Try this Guyz :-
How to:
1. Download this file : http://rapidshare.com/files/77211814/SDHC_Driver.cab
2. Make sure your device is running WM6
3. Save the file to a folder (example: My Documents) to your device and NOT your memory card.
4. Remove the current memory card from your device.
5. Switch on your device and look for the saved .cab file using File explorer, then run it.
6. Format your SDHC card using a PC or laptop with FAT32 file system.
7. Now insert your SDHC card your device...
youre done!
----------------------------------------------------------------------------------
Please try this one guyz..
http://rapidshare.com/files/76471143/SDHC4WM5.zip
PLEASE WRITE YOUR REVIEWS AFTER DOWNLOADING THE DRIVER
you are still have strong spirit to try SDHC card
Yup..even though i dnt have a SDHC card.but im planning on buying it
Not working
Not working for me. Besides, all those SDHC posts contain drivers that are different then on my Hima. The cab contains SDMemory.dll and SDBus.dll while my original drivers are SDMemory.dll and SDBusDriver.dll.
I adapted my registry to correct this difference, but that didn't help. No more Storage Card at all.
My guess is that it is not for normal SD but for micro SD, hence the different bus drivers.
For the record: I'm using the 7.0c of c_shekhar.
New link is also not working. Again not even after changing registry.
hmmmm....well lets see if some one else also comments abt it..
rvdrijt said:
New link is also not working. Again not even after changing registry.
Click to expand...
Click to collapse
IMHO changing the file names would be a better way to try than changing registry.
@rvdrijt
Did u follow the instructions written at top
Yes. And then I had no more Storage Card link.
So then I tried hacking my reg, also without good results.
@Maggy
I've tried that before, but I could not remove the old SDBusDriver.dll. That's why I tried changing the reg. Any idea on how to remove the old one and then rename the new?
this might sound like a noob question,
over the universal forum they've figured out a working driver that supports at least an 8GB SDHC and I've tested it myself with a PQI 8GB and it works,
so I was just wondering if we can import that driver out to himalaya and make it work because from my understanding SDHC support is not based on the hardware rather than driver update for the device, and since it's been made for both WM5 and WM6/6.1 over there so technically it should work for our WM6 himalaya too, no?
just my 2 cents.
thanks..but the drivers are not the same..any way if you can attach the file maybe i will take a look..all the drivers i have tested just remove your atm functioning SD cards drivers also
This should be the latest SD driver that was used in Ranju's WM6.1 ROM,
but in case it's different, you might wanna take a look at the cooked ROM yourself as I'm not experienced with that.
Ranju's WM6.1 ROM:
http://forum.xda-developers.com/showthread.php?t=367448
Hi Gurus
I have FXXXXed my xda2 by trying installing sdhc drivers , now forget about sdhc blody normal sd card not working as well ( I should have read those forum about it first)
now the question is how can i get my old normal sd card working on my xda2
Please help
hardreset should help.
Worked for me when i did some driverexperiments
cu
HI thanx for replying
but i can't do hard reset as my camera button is broken from motherboard
and the traditional way (powerbutton + reset) is not working, the only way was to press record + camera + reset, i do have xpshut program thats not hardresetting as well
is there any other way to do hard reset i mean programmcally or any other means
or jst replace the sd drivers
plz help
I think sk-tools can do a hard reset by software, maybe memmaid to, I don't know it exactly. But sk-tools I´m sure.
hi any free tool
plz
Even if sktool is unregistered, this function isn't restricted, as I remember.
Hi thanx
yeah thast right just need to highlight at the beggning for hardreset
so i did hardreset
now problem not gone away no sd card at all
so now what should i do
while hardreset push Camera and Recordbutten to get the early Bootmenu.
With Recordbutten you can select the Item and with Camerabutton you change status.
It should set to
NO
YES
YES
then push the Navbutton in some Direction.
This should erase all usersettings
cu
This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
This method works for any 6.1 and 6.5, and even radio rom.
*** Some Kingston brand may have problem to use SD method, no solution other than use RUU method ***
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction
Thx, always using this system.
Sticky
Sticked this one!
Edit By Badwolve1: Unstickyed due to lack of posting, but reference in the X1 Thread (Here)
I am newbie in Windows Mobile system.
Please somebody tell me, what is SPL, and hard spL?
inuka said:
I am newbie in Windows Mobile system.
Please somebody tell me, what is SPL, and hard spL?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
http://wiki.xda-developers.com/index.php?pagename=HardSPL
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
hysf said:
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
Click to expand...
Click to collapse
I've got the same proplem. Any suggestion?
Thanks!
I've got it working now, just d/l all the files here and follow the instructions
http://forum.xda-developers.com/showthread.php?p=2906948
Cheers!
jackleung said:
This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
Click to expand...
Click to collapse
How do you format the micro-sd, can we use the card slot provided in laptops, becoause no adapter comes with the set
songao said:
I've got the same proplem. Any suggestion?
Thanks!
Click to expand...
Click to collapse
This could be a problem with you're ROM language.
My xperia was english, so had no problem. 2 Dutch xperia's had this problem.
Just flashed SPL first, then flashed the english rom. And now the sd card method works on the 2 dutch xperia's.
hysf said:
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
Click to expand...
Click to collapse
xmoo said:
This could be a problem with you're ROM language.
My xperia was english, so had no problem. 2 Dutch xperia's had this problem.
Just flashed SPL first, then flashed the english rom. And now the sd card method works on the 2 dutch xperia's.
Click to expand...
Click to collapse
I also got the same problem when using the rom from this thread http://forum.xda-developers.com/showpost.php?p=2392404&postcount=1 but the flash of microSD method ran pretty well with this http://forum.xda-developers.com/showthread.php?t=431218&page=6
Does the device automatically reboot after it's installed? I just used this method and the device currently says:
'KOVSIMG.nbh - OK
OS - OK
Update Complete
UPDATE SUCESS'
It hasn't done anything since.
spr33 you take the battery out, put it back in and switch on
I'm having a few problems, I have the HardSPL installed but when i load the rom image on the sd card and reboot the bootloader shows a message of "no image found". Is there something im doing wrong? The sd card is formatted to fat32 and it only has the images on it
blackax said:
I'm having a few problems, I have the HardSPL installed but when i load the rom image on the sd card and reboot the bootloader shows a message of "no image found". Is there something im doing wrong? The sd card is formatted to fat32 and it only has the images on it
Click to expand...
Click to collapse
I was having the same problem as you, I tried everything finally I just used the kovsky RUU and used the pc update tool with it. it worked great. just make sure you take your sd card out before you do it or it will keep trying to search the card and say no image.
Problem X1 rom chang on english
I can't change rom on my X1 i have formated card on FAT32 my file name is ruu_signed.nbh i chnge the name on "Kovsimg.nbh" my device is set to tri color bar and on the screen i have Loading... and nothing else
can you help me ????
It works, I'm free and thank you
After weeks and weeks aof reading, reading, reading, making copious notes so that I had the process sorted from start to finish, I decided to bite the bullet tonight, yes, New Years Eve (well it is my new X1 after all ).
OliNex Hard SPL worked a charm, then during the micro SD method, the dreaded "no image file" message appears. RATS!
Numerous FAT32 processes, different ROMS and still the same message.
Tried the cable version using RUU and viola, I now sport the fantastic Touch IT v2.2 and NO VODAFONE
I would like to thank the more senior members for their cutting comments to witless noobs that made me read, search and read again.
Also to itje for his great ROM - have only just had a cursory scan so far as only just finihsed synch, and running like a dream. Donation certainly coming your way!
HAPPY NEW YEAR ONE AND ALL at XDA Developers from a very happy revitalised X1 owner!
ROM replacement
Moved original message to correct thread ...http://forum.xda-developers.com/showthread.php?t=445818&page=42
Has anyone more of an idea why the SD card method is causing so many to come up with the "No image file" message" ?
The USB version works for me, just would like to know the reason for error message - in case need to use it one day
BIG QUESTION:
Why some people can't flash from microSD card ??
I had the same issue
After a lot of trial and error, testing and testing, I arrived to this conclusion:
IMPOSSIBLE TO FLASH WITH microSD METHOD
(Nothing happens, "serial" message or "No image found" message popped up)
a) When I used an incorrect format (other than FAT32) on any brand card
b) With two Kingston cards properly formatted
I have successfuly flashed my X1 with unbranded cards and sandisk cards,
but after many attempts and format variants I NEVER achieved a successful flashing with kingston cards
Interesting...
Hi guys! i tried 2 flash my x1 ending in f***d up device.
I did the following:
1) running the hard_spl. The flashing started and at about 50% it stopped went back to the stripes screen telling me file not found...serial....all the things you guys described in the forum.
2) I created a card with a Kovsimg.nbh and restarted the device. Result was the same: File not found!!! but i did all like in the tutorial.
3) I tried again with hard_spl: First I got an Error 282 then 262. The device changes from stripes to grey screen the bar shows 0% ......thats all.
any suggestions??????????????????
Hi
I have 2 gb micro sd card and I want to format it using Resco file explorer. But it keeps telling me to check to see if its unlocked.
I use to be able to format without a problem. But i have recently started to flash roms. I can put stop and take stuff without a problem. Just won't let me format.
I also tried formatting using my laptop, but won't work.
EDIT: Sorry, wrong place. Wanted to post this in general Kaiser forum.
Is the little write protect tab on the side of the sd card in the right position??
i moved it off the lock position and nothing? my comp won't even let me right click it. when I click to open it, says needs to be formatted and when i click format PC says it can't be formatted.
I searched on here, but no thread about this type of problem. card isn't ruined because i can still add and delete stuff.
I never experience this issue .. quite confusing.
However, this should be posted in General forum, not ROM Development. Mod, please move as such ..
tilt4life2 said:
Hi
I have 2 gb micro sd card and I want to format it using Resco file explorer. But it keeps telling me to check to see if its unlocked.
I use to be able to format without a problem. But i have recently started to flash roms. I can put stop and take stuff without a problem. Just won't let me format.
I also tried formatting using my laptop, but won't work.
EDIT: Sorry, wrong place. Wanted to post this in general Kaiser forum.
Click to expand...
Click to collapse
Could be a problem with the card / slot connectors. Try with some other card reader.
I had an issue once where I couldn't format my card - I had no lock errors though, just couldn't format through the PC or with PPC programs.
Eventually I installed 'Flash Format' by CNetX (google it) - it formatted first time on the free evaluation version.
Worth a try if you're about to bin it!
Good luck.
brandall said:
I had an issue once where I couldn't format my card - I had no lock errors though, just couldn't format through the PC or with PPC programs.
Eventually I installed 'Flash Format' by CNetX (google it) - it formatted first time on the free evaluation version.
Worth a try if you're about to bin it!
Good luck.
Click to expand...
Click to collapse
You sir are a genius and a life-saver!
This product is a magical potion for the microSD card. I tried so many different things online, on the laptop, and the Kaiser and none worked. This thing took less than a minute and formatted with the click of one button.
Mods, please move this thread. Hopefully it can help others who might have this problem in the future.
Thank you very much sir!
Glad it worked - it's very strange that this little program seems to be able to sort the issues that even the premium programs can't....
Hi, this is my first post on this forum and i'm hoping to get some help to solve my problem.
I have an unlocked ATT treo 750 that i'm currently using with T-Mobile. I was happily running windows 5 and decided to try this new windows mobile 6.5 so i downloaded the rom from a thread on this forum and i ran the update process while my phone was connected to windows zync porgram, so it worked fine, but as soon as i rebooted my phone to the new windows 6.5 it gave me the
"This concludes de beta test of this software release...." now i try to reconnect my phone to my pc to zync and flash another rom but i won't recognize the connection.
what can i do, i know there is a way to flash a rom using your mini sd card but i'm not sure about this process....tell me if i have it right:
1. format your mini sd card using fat32, using a computer with a card reader (i can't format it using my phone cause of ovious reasons)
2. copy the rom image to the mini sd card on the root folder. the rom image should be in .nbh format. (i have a rom called CHEEIMG.nbh by Navenedrob)
3. re-insert the mini sd cad to the phone.....I DONT KNOW WHAT DO AFTER THIS, and what do you mean by HARD SPL or SPL... is it a file i should copy along with the CHEEIMG.nbh file in the mini sd card????
PLEASE HELP ME.. what buttons do i press on my treo 750 to trigger installation...?????
thanks
Hello there if you look a couple of threads down on main form page there's a post by Navenedrob who gives step by step instructions on how to sucessful complete the whole process
I did it about 2 weeks ago as a newbie and it very easy to follow very good update
Also make sure you download and use his WM6.5 ROM. No expiration date ...
hlopez said:
Hi, this is my first post on this forum and i'm hoping to get some help to solve my problem.
I have an unlocked ATT treo 750 that i'm currently using with T-Mobile. I was happily running windows 5 and decided to try this new windows mobile 6.5 so i downloaded the rom from a thread on this forum and i ran the update process while my phone was connected to windows zync porgram, so it worked fine, but as soon as i rebooted my phone to the new windows 6.5 it gave me the
"This concludes de beta test of this software release...." now i try to reconnect my phone to my pc to zync and flash another rom but i won't recognize the connection.
what can i do, i know there is a way to flash a rom using your mini sd card but i'm not sure about this process....tell me if i have it right:
1. format your mini sd card using fat32, using a computer with a card reader (i can't format it using my phone cause of ovious reasons)
2. copy the rom image to the mini sd card on the root folder. the rom image should be in .nbh format. (i have a rom called CHEEIMG.nbh by Navenedrob)
3. re-insert the mini sd cad to the phone.....I DONT KNOW WHAT DO AFTER THIS, and what do you mean by HARD SPL or SPL... is it a file i should copy along with the CHEEIMG.nbh file in the mini sd card????
PLEASE HELP ME.. what buttons do i press on my treo 750 to trigger installation...?????
thanks
Click to expand...
Click to collapse
Hi,
I'm sorry, I wrote that tutorial for people who couldn't use HARD SPL (A piece of software that lets you flash the phone) to get Windows Mobile 6.5.
Try formatting the memory card to FAT32 using a card reader, then from your computer, download the ROM here and paste it onto your memory card (ROM Link- http://forum.xda-developers.com/showthread.php?t=541417 ).
Load the memory card into the phone.
Where you've just loaded the memory card, there is a Reset button. It's tiny, and its located where the memory card slot is.
On the other side of the phone is the Media Button. It's the one below the volume buttons. Hold this button down and press the Reset key with your stylus.
The screen should load into the "Bootloader" mode and try to scan your memory card. If it recognises the CHEEIMG.NBH file, it will ask you to press the Call End key and then go on installing itself (I hope).
After saying all this, please note that I'm not an expert and had to experiment. I didn't however brick my phone with a Beta release so I'm giving you this in the hopes that it will work.
Just make sure you have the CHEEIMG.NBH file. It may have a different filename (anything that comes before .nbh), you just have to rename it.
Secondly make sure your card is formatted to FAT32. Google it if you don't understand or if you don't know how. I use a mac so formatting is easy.
Thirdly, familiarize yourself with starting up in Bootloader mode.
Have a play, I hope this helps.
eD