usb not working after upgrade - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

I updated my SPV M1000 to "C_ShekharAKU7.0b.R40.P24_public" and ever since then the usb has not worked
I also have a xda!!i so i know it is not the cradle
what i would like to know is it posable to update the rom using the sd card i have looked but cant find any thing to help
thanks in advance for your help

Maybe a Port or serialusbfn.dll problem
Hi, look at the hints of Jo_III in http://forum.xda-developers.com/show...=341221&page=4
and follow exactly, if you get an error of a missing driver
or if you do not get any reaktion at all :
Try to think of accidentily using the Port to sync twice.
I had the same prob, when I tryed to use port 8 for external GPS.
PHM device manager helped me to use an unused port.

muckelmaus, your link isn't working. I tried to find that post using the seach option but did not succeed. The part of the URL that belongs on the three dots is required to be able to click it.
Thank you.

Sorry
Sorry, the link was to long to copy. Look at Post #28 and #31 at
http://forum.xda-developers.com/showthread.php?t=341221
One way to install the .dll is to rename it to serialusbfnew.dll,
copy it to \windows and rename it back to serialusbfn.dll
If you try to copy without this trick, you might get an error, that it is impossible, because it´s a system file.
Maybe Totol Commander does the job at ones, normally it doesn´t care but I didn´t try it.
Thnx Maggy, I didn´t know, that there is a lenght limit for links.

Related

do we have a ROM in the ftp that i can flush to?

do we have a ROM in the ftp that i can flush to? thats working? just wondered if that could fix my storage folder missing problem.
a link to the directory would do it. thanks in advance!
we have lots, check wiki
i mean is with an SD Card..the following doesnt work:
O2 Asia xdaiisradio10200.zip
O2 Asia xdaiiscerom11262.zip
XDA 2s HK Eng 1.31
Would answer the question then of why they were never posted in wiki!
The radio 1.10.00 you can install as per wiki
Extneded roms you can get all applications and patches form those roms that have been cooked of wiki
The operator customization is in the kitchen on wiki
As for the 02 asian rom, well nobody has uploaded a ship.exe
that was quick.
thanks for the fast reply MDAIIIUser!
last question MDAIIIUser..do we have a solution for my Storage folder missing problem?(please!) this the problem why i wanna try to flash a ROM with an SD Card..
I dont like flashing from sd, to much work!
I still think the i-mate 162 rom of wiki is good, used it untill I had to reflash my device with all the passed Type I and Type II versions on wiki.
Then went with the 1.31 arabic and cooked my exteneded rom, added the 1.10 radio and the BT 3900.
Both of these roms work with the old tool.
ive almost tried all the ROM on the ftp..but still Storage Folder disappears after my first reset. ow yea on the my first boot i can see the storage folder and on the settings in memory i can also see the storage..its full..i guess thats one of the reason why im having this problem. any suggestions on why did this happend and afcorse a solution on how to fix this would be the nice.
thanks again MDAIIIUser!
Hmmm...first time I see this problem...
What is in the Storage Folder?
ow yea also the Extended_ROM doesnt load(ive tried all the unlock cabs doesnt work..and also flash manager errors! task manager error connection manager error all of the permanent save options..i guess cause windows cant save it or find the Storage Folder..and after first soft reset as ive said it disappears..
please anybody..there must be a solution on this?!
Looks like something is seriously messed up.
I suggest as a last resort to reinstall a complete new SHIP ROM that is closest to your original configuration...you can always upgrade later.
Look here to find the version you want and download it:
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Upload the ROM to your PDA in the cradle, not via SD card. Hard reset and tell us if that is better...?
i have this problem for a long time now..so thats why ive almost tried all of them..can you imagine how much this problem is really been a pain for me? DAMN!
ow yea in order for my IIs to work..i figure the reason why i always hang is because some folders are missing..like the extended_ROM and storage folder so i made a folder with the same FileName..after ive created the Folders it almost instantly stabled(doesnt lag when i press a button or somthin) and files already in them. like on the Storage folder the PerSaveBackup Folder is instantly created.
so i guess my problem is why is it when i hardreset some folders that are really important for windows to function are missing on my phone? how can this happen?

Please help a new Kaiser owner, Mac-based

Hello all. Just got my phone on Orange and I like it. I have been a Mac-user for the past 12 years so I am used to not tweaking my gadgets. Can someone explain how I install the CABs onto my Kaiser via either my G5 iMac or my intel Macbook. Many thanks
do'h not very sure, but you might want to try the missing sync, grab the latest version, it now supports win5 and 6. basically that's what you need to synch your mac and PDA, but not very sure if you can install 'em through it though
Now how do I find the installed CAB
OK I have downloaded a CAB onto the Kaiser via Missing Sync. (HTC album mui 0419.cab) So how do I now find it on the phone and activate it or any other CAB?
Thanks again
not that hard
I get that you're new, I am too, but try to figure this stuff out by yourself.
Bluetooth should work for getting files onto the phone (my docs/bluetooth)
When you sync to the phone, the PC version is that you see the phone on the schema/folder tree and can choose where to put it.
When you find the cab file, opening it will install it. Generally try to put system specific things on main memory and things like games on a storage card.
Look at some must have threads to find programs that you like and after you figure it out try a hard reset and reinstall things. That will let you keep a stable device.
As for ROMS, I would be careful of even thinking about flashing on a mac unless you find a thread telling you how to do it, you don't want a bricked device.
Remember to search the forums - it's worth your time.
Just mount the kaiser with missing sync. After that, drag and drop the file to a location that you can remember. Once you do that, just go to the file explorer in the kaiser, locate the file, and click. You should be all set.
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
from what I can remember, Missing Sync is really broken at the moment. (under 10.5).
To install a cab, you just use the tab next to syncronize, what is it, the file tab or somehing?
if it's a .cab, it will be loaded automatically. But make sure there's no spaces/irregular characters on the .cab, otherwise, it won't load the installation, and possibly, the file will not be uploaded at all. I think this is a missing sync bug.
Nope, you're going to have to pull the .CAB out of the .EXE file
jakontil said:
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
Click to expand...
Click to collapse
chenga said:
Nope, you're going to have to pull the .CAB out of the .EXE file
Click to expand...
Click to collapse
hi chenga, mind to point me how to do so? because i am going to lose my XP system very soon

Navigator 6

An trying to install navigator 6 from CD. Keep getting message that I need to update rom. Tried to do that yesterday, got into trouble and you guys saved me (thanks again) ,but still cant install navigator6. Am using TyTNII with rom version 1.81.701.1WWE radio1.27.12.11. Does anybody have any ideas?
cutter1954 said:
An trying to install navigator 6 from CD. Keep getting message that I need to update rom. Tried to do that yesterday, got into trouble and you guys saved me (thanks again) ,but still cant install navigator6. Am using TyTNII with rom version 1.81.701.1WWE radio1.27.12.11. Does anybody have any ideas?
Click to expand...
Click to collapse
Its a known issue and it doesn't matter what radio you are using. There is a fix, but it takes longer and is more of a hassle. First I don't know if you have signed up at MyTomTom.com yet or not, but you have to because the version that does work is not English speaking voices, so you will have to download an English voice. Go to the link in my signature under Programs, its called "Working TomTom", download it and install it to the device. If you need help getting the voices set up just let me know and I will walk you through it.
TYKDKobes finally got that installed. hopefully its better then the other navigation softwares I've tried so far.
Thanks will try this, finally got Nav 5 installed, but would like version 6 for newer maps. Sorry to be a bit thick, but do you mean to install the file I downloaded onto my device and the try to install Nav 6?
cutter1954 said:
Thanks will try this, finally got Nav 5 installed, but would like version 6 for newer maps. Sorry to be a bit thick, but do you mean to install the file I downloaded onto my device and the try to install Nav 6?
Click to expand...
Click to collapse
That CAB is TomTom Navigator 6. So just install it from your device.
Got it working, downloaded voices, Thanks heaps for you help!
In my signature is a link for all the free TomTom voices instead of trying to find them all. Just download the Zip file and extract it to your computer. You will need to REPLACE your current "voices" folder with this one. For instance my TomTom is installed on my Device, under Programs, Navigation, and in that folder you will see another folder called "voices" that is where TomTom stores its voices. All you are doing is taking the one you downloaded and replacing it with the old one. **this will replace any current downloaded voices**
"the zip file is located under cabs"
will install and test the application.
thanks
KDKobes said:
Its a known issue and it doesn't matter what radio you are using. There is a fix, but it takes longer and is more of a hassle. First I don't know if you have signed up at MyTomTom.com yet or not, but you have to because the version that does work is not English speaking voices, so you will have to download an English voice. Go to the link in my signature under Programs, its called "Working TomTom", download it and install it to the device. If you need help getting the voices set up just let me know and I will walk you through it.
Click to expand...
Click to collapse
Hi, can you help me, I'm trying to install Tomtom 6 to my HTC cruise. I keep getting the message to update my ROM, I tried to follow the advice in this thread, but have failed. Can you walk me through it? Cheers
what is the speed of tomtom like on your device mate? mine is painful, screen refreshes every 1.5 seconds, whereas i get 15fps on another sat nav program (which actually holds reception better than tomtom too!)
TomTom support were helpful, told me to hard reset and try again. I think its a software issue with 6.032.
The other sat nav programs arem much more graphic intensive too, so i doubt its the graphics drivers.
drkozman said:
Hi, can you help me, I'm trying to install Tomtom 6 to my HTC cruise. I keep getting the message to update my ROM, I tried to follow the advice in this thread, but have failed. Can you walk me through it? Cheers
Click to expand...
Click to collapse
Which version of TomTom did you download and install. Usually that error appears when you download the TomTomWWE(World Wide English). The one you need to download and install if you get that error is the Working TomTom CAB which can be found in my signature under CABS, Programs. Should work then.
how do I install the program from you're cab to my HTC cruise? I'm a bit of a novice at this, sorry.
Download the cab file to your computer, and copy it to your Device or Storage Card. Remember where you place the cab file because you will need to open it from you Phone using File Explorer. Now navigate to the file and click on it. It will automatically start to install, usually it will ask you to install to the Device or Storage Card, but this CAB will just install to the Device.
when I do this I get a message 'there is no application associated with..' run the application first, I can't get the tomtom application off my CD? sorry for being such a pain. Thanks for you're help.
flashy said:
what is the speed of tomtom like on your device mate? mine is painful, screen refreshes every 1.5 seconds
Click to expand...
Click to collapse
Check your GPS speed in TomTom.
Go > Change Preferences > Show GPS Status > Configure > Oter NMEA GPS receiver > GPS baud rate > COM4
The GPS baud rate should be between 4800 and 9600, if its too fast mine exhibits the jerkiness as described in your post.
drkozman said:
when I do this I get a message 'there is no application associated with..' run the application first, I can't get the tomtom application off my CD? sorry for being such a pain. Thanks for you're help.
Click to expand...
Click to collapse
Kinda confused now. What do you mean you cant get the application off your cd? If you have downloaded the cab then you dont need the CD. After moving the cab to your phone go open it, by using your phones file explorer program(single click or double click) should automatically install itself. have you made it to that point?
This is also a great resource to TomTom 6 http://forum.xda-developers.com/showthread.php?t=330235
I downloaded the cab files from you're signature and then had a list of files which weren't associated with any program (they had the generic icon next to them) I then put all these files on my micro SD and put in my phone. I then went to these files on my phone using file explorer and there was still a list of generic icons. Maybe I did something wrong in the download. I downloaded with winRAR and extracted all the files to a folder on my desktop. I really appreciate you helping me, thank you.
KDKobes said:
Kinda confused now. What do you mean you cant get the application off your cd? If you have downloaded the cab then you dont need the CD. After moving the cab to your phone go open it, by using your phones file explorer program(single click or double click) should automatically install itself. have you made it to that point?
This is also a great resource to TomTom 6 http://forum.xda-developers.com/showthread.php?t=330235
Click to expand...
Click to collapse
I downloaded the cab files from you're signature and then had a list of files which weren't associated with any program (they had the generic icon next to them) I then put all these files on my micro SD and put in my phone. I then went to these files on my phone using file explorer and there was still a list of generic icons. Maybe I did something wrong in the download. I downloaded with winRAR and extracted all the files to a folder on my desktop. I really appreciate you helping me, thank you.
drkozman said:
I downloaded the cab files from you're signature and then had a list of files which weren't associated with any program (they had the generic icon next to them) I then put all these files on my micro SD and put in my phone. I then went to these files on my phone using file explorer and there was still a list of generic icons. Maybe I did something wrong in the download. I downloaded with winRAR and extracted all the files to a folder on my desktop. I really appreciate you helping me, thank you.
Click to expand...
Click to collapse
No these files dont get extracted before moving to your phone. When downloaded the file should be a blue file folder icon called a .CAB. Once downloaded take that exact file and move it to your phone. Here is the link to the cab http://www.4shared.com/file/47123724/832a2d34/Working_TomTom.html
KDKobes said:
No these files dont get extracted before moving to your phone. When downloaded the file should be a blue file folder icon called a .CAB. Once downloaded take that exact file and move it to your phone. Here is the link to the cab http://www.4shared.com/file/47123724/832a2d34/Working_TomTom.html
Click to expand...
Click to collapse
Hey it worked, you're a dead set legend, thanks a lot mate

Installation

Hi,
Im quite new on this HTC phones.
I have a problem, I dont know how to install software on the diamond.
It opens the files in Opera but it will not start the installation.
Do I have to have any program to install programs on the phone?
I have been trying to install tomtom 7 but it will not work.
Best regards,
Martin
Look on the internet for a cab file of TT7 copy and paste this in your internall storage in the map programmables. Disconnect phone from usb go to the place where you put it and run it from there.
This should work probably.
Grtzzz
I have the same problem too, but only happened while installing .cab file.
Anyone can help? Thanks a lot.
It dosent work.
I found the file here on the forum, I did active sync with my computer, I took the file, moved it the the 4g internal storage of the phone.
I tryed to start it but nothing happens.
Thats the problem i have, it seems that my phone dont want to start the cab files.
Should I just click the file or should I do something else?
Normaly just clicking is enough.
Sorry but are you shure its a cab file its not rarred or zipped.
Have you allready installed other programs this way?
For cab files i do not use activesync to put them on the device i simply do it in storage mode.
Grtzzzz
I found the way, I had to make a soft reset. Then it worked!

help on: softick's card export II ver 3....

what do you call the bar of alphabet on the right side which appears when your scroll thorugh a big list.....???
сan any one point out the links to cabs to install it???
any recommendation for the cleanest rom for HTC TYTN II ??
ps: recently after flashing to new rom....notice that it's not included.....
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
how to render a card reader????
McHale said:
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
Click to expand...
Click to collapse
thanks for the fast reply!!
i'm using hyperdragon lite rom now....
how ever somehow softick card export is not working....
my pc kept on installing the driver for it for the first connection....
after some time kaiser hang......
and on second connection the pc show that it is connected.....but i can't explore the sd card cos there's no link from my computer .....
normally i would search for autorun.....but after rom update to hyperdragon it stopped working.....
still trying the search to look for fix...........
anyone??????
ps : w5storage not working tooo....
only hope at the moment....pocket controller through the file browser option???
this is really a pain!!! cos i don't have a card reader......
active sync could do some transfer but it's slow and limitation with the file size.......
edit: some one pointed out that in order to use card export, a usb2pc.exe file need to be in the /windows folder.....
anyone can kindly verify this????
or please kindaly upload a copy of that file so that i can try it my self......
(no rapidshare or megaupload servers.....they don't work for me)

Categories

Resources