Database Develop

cant browse IE on kaiser thru active sync connection

aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync

You want to connect to the internet through your home pc via usb/BT?
You might want to try this.. I'm not SURE, just offering a suggestion.. someone can confirm/bunk this either way..
Start|Settings|Connections|Connections
One of the settings there might work for you,
If not.. theres a Little blue Question mark in the top right that actually has some pretty in depth info..
Sorry I couldnt be of more help, but it's a start.

Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.

Monrad said:
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Click to expand...
Click to collapse
Hey m8, i have the same problem and i have tried to follow ur remedy
how ever still i am getting the error "the page cannot be displayed or downloaded because the connection was lost. check the connection and try again later." cannot connect... this is the same with Opera as well.

any having the same problem? is there any one with a fix for this...

sultan said:
any having the same problem? is there any one with a fix for this...
Click to expand...
Click to collapse
if i'm reading right you want to use internet sharing using usb or bluetooth and browse the internet using your PC?? is it?
1.first open setting in your active sync then uncheck allow the usb connection .
2.plug in the usb cable to ur pc and kaiser
3.open the internet sharing in your kaiser end select conection typ usb or bluetooth.
4.connect. (your computer will be installing rds driver automaticcaly)
5.then you'll have a gprs internet trough your pc
note you must have gprs/3g connection available in ur network.
in ur pc in the internet connection option makesure you select direct connection if you use firefox/opera.
Hope this solve your problem.

mikeeey said:
aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
Click to expand...
Click to collapse
You are wanting to browse IE on your phone using the Activesync usb or BT connection (phone uses PC's internet connection for data) am I correct in thinking that?
I'm not sure what you mean by 'No comm ports available' as your WM device connects via USB?
Sorry if these steps may seem a bit condecending but best to check all.
1, Has your PC got a working internet connection (can you browse IE on your PC) ?
2, Is Activesync actually working (your contacts and mail are sync'ed) ?
3, In connection settings on Activesync (PC) you need 'Allow wireless connection' unchecked (Checked for tethering, PC goes through phone 3G) or phone will try to go through any data connections of its own first.
4, On your WM device under 'Settings' 'Connections' 'USB to PC, check the 'Enable advanced network functionality'
Hope this helps.

I have a similar query, I can use my PC's internet connection from home, but when I connect to my work PC it does not. Now I know this is down to the fact that my Work PC uses a proxy server, but how do I add this info in to my Tytn2.

Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj

fisha21 said:
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
Click to expand...
Click to collapse
Your welcome.
Is your device an 'out of the box' HTC device that was not bound to a carrier contract? Some carrier (ie. AT&T Vodaphone) seem to have settings within the ROM (seen in other threads) that tie you in to only using their settings (ie Media.net) and using a proxy that cannot be changed for IE only for GPRS connections.
Anyone got ideas on this one.

Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?

fisha21 said:
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
Click to expand...
Click to collapse
Are Orange UK (I am from UK but living abroad now) still wanting to promote their own Internet?
I know only last year a pal of mine said he could not connect his Nokia through his home WiFi because it would not connect via his BT Internet.
Check if you have a proxy connection set up on your GPRS cause ya never know!!!

I can connect to any Wifi network and access webpages without problems. Doesn't seem that there are any restrictions from that point of view. Thanks for the help - guess it's not really a problem not having Internet access via ActiveSync, as it connects to the Wifi network.

i guess i shoulda been more specific.
i wanted to browse the internet on my kaiser, using the active sync connection. however it wasnt working, but now ive re-installed opera and it works with that, not sure if it works with IE yet.

installed Opera and still no hope.

my tytn II is out of the box, not on any contract with an operator. can any one please help me..

S730-Notebook with Vista-No internet

I have a notebook, with MS Vista, and with mobile internet (pcmcia card). A tried to connect internet via s730 through mobile device center, but i can't.
I tried with WI-FI: connect to my notebook (ad hoc connection) but i can't use internet.
I tried it with free hotspot and it works.
I don't understand. What can i do?

How are you trying to get online?
You want the s730 do connect to your data network and share that? Or do you want to dial it into the internet (someone got that working on here) or are you connected through your notebook already and want to share that to your s730?

10332007 said:
How are you trying to get online?
You want the s730 do connect to your data network and share that? Or do you want to dial it into the internet (someone got that working on here) or are you connected through your notebook already and want to share that to your s730?
Click to expand...
Click to collapse
Connect with my notebook to the internet, and i want use this network with my s730 (connected to notebook with wi-fi).

is this helping?
http://forum.xda-developers.com/showthread.php?p=1857968#post1857968

I don't know, that was BT connection.
Next question: Mobile Device center why not seeing my device, when i connect to desktop with wi-fi?

bfeco said:
I don't know, that was BT connection.
Next question: Mobile Device center why not seeing my device, when i connect to desktop with wi-fi?
Click to expand...
Click to collapse
I've never been able to get this to work, I don't even know if you can or not.

I am confused.
Do you want your s730 to get on the Internet by connecting to your laptop? Can you just use a usb cable then you can use internet connection through laptop onto phone.

If I understand you correctly your laptop is what is online and you want it to pass the connection onto your phone through the wifi?
If thats the case that you just need to enable ICS on your laptop. It will be under your menu settings, I havnt messed around with vista's network settings so I cannot tell you quite what it looks like. Possibly a check box or a protocol to install. But once you install Internet Connection Sharing your computer should pass the connection out.

bfeco said:
I don't know, that was BT connection.
Next question: Mobile Device center why not seeing my device, when i connect to desktop with wi-fi?
Click to expand...
Click to collapse
I have this working on my machine with my 730. Often you might need to repair the network connection to your phone from the network connection control panel as it sometimes loses it's IP address.
I also found that I needed to do some work in OneCare which I use as an AntiVirus and Firewall as this was blocking access to the Mobile Device Center.
hope this helps

10332007 said:
If thats the case that you just need to enable ICS on your laptop...
Possibly a check box or a protocol to install. But once you install Internet Connection Sharing your computer should pass the connection out.
Click to expand...
Click to collapse
Ok, i found this check box. ICS enabled, but something wrong, because the net don't working... but im tryin' again and again thanx!
I see, that the wi-fi connection is very unstable..loss the connect every minutes..
ps.: at least now it's working with usb..

Using PC's internet on PPC

Hi,
I have Windows Vista and use Windows Mobile Device Center to connect to my TyTN II using USB. Can I use my PC's internet via USB on my PPC?
I was also thinking of turning my PC into WiFi access point so that my Kaiser could connect to it using Wifi
Any ideas
Thanks

As long as you are connected through activesync (sorry WMDC) you can use your PC's internet on your phone. As for your second question you should just get a wireless router if you want wi fi for your kaiser.

Thanks for the quick response.
<insertwittyusernamehere> said:
As long as you are connected through activesync (sorry WMDC) you can use your PC's internet on your phone.
Click to expand...
Click to collapse
But that never seems to work ... it used to work with activesync on Windows XP on my home PC but not on my laptop with Windows Vista.
<insertwittyusernamehere> said:
As for your second question you should just get a wireless router if you want wi fi for your kaiser.
Click to expand...
Click to collapse
Hmmmm... I have been using Wifi on Kaiser without a problem. I was just thinking if I could use my Laptop as access point so that my Kaiser could connect to it over wireless connection... Or any other idea for internet connection sharing (of PC for PPC).
Yasir

anyone? ...

You want to keep your laptop on to use it as a Wifi AP for your kaiser?? Might as well use your laptop already and not ruin your eyes.

Haha... yeah right... actually I was a bit unclear in my statment.. let me try to put it a little differently..
laptop uses internet via LAN cable... I want to share that internet with Kaiser over Wireless ... is it possible... (now that's more of a PC related question that Kaiser, so I have a Kaiser related question too)..
I can't use internet via WMDC on Vista ... what could be the possible reason?

yana209 said:
laptop uses internet via LAN cable... I want to share that internet with Kaiser over Wireless ... is it possible... (now that's more of a PC related question that Kaiser, so I have a Kaiser related question too)..
Click to expand...
Click to collapse
Yes, but for that you need to have your laptop powered on... his point was that if your laptop is on you might as well use the net on it rather than on the obviously much less comfortable phone.

I never tried it, but could be possible by making a ad-hoc wireless network on your laptop, and making your laptop a gateway.

There are settings hidden away that need ticking for sharing the internet connection of the PC, although I thought they defaulted to "on". I'm not sure, I haven't touched a vista machine in months!
Ad-hoc wifi would be the way to go, but good luck getting it working; it's a royal pain in the arse half the time, and for the rest it works like magic. Depends on the devices.
If you're browsing on your phone I hope you've got a copy of Opera Mini; using wifi my phone can nearly outpace my PC at browsing the net.

CrArc said:
There are settings hidden away that need ticking for sharing the internet connection of the PC, although I thought they defaulted to "on". I'm not sure, I haven't touched a vista machine in months!
Ad-hoc wifi would be the way to go, but good luck getting it working; it's a royal pain in the arse half the time, and for the rest it works like magic. Depends on the devices.
If you're browsing on your phone I hope you've got a copy of Opera Mini; using wifi my phone can nearly outpace my PC at browsing the net.
Click to expand...
Click to collapse
Open wmdc
choose mobile device settings >> Connection settings
Set: " this computer is connected to" to either "automatic" or "the internet"
That should do it.

Hi...
It's already set to "automatic" and changing to "internet" didn't work either..
thanks for the suggestion on wifi adhoc..i'll try to find more about it...

Hi,
I was wondering if it is posible to share the Pcs internet with the Kaiser with a Bluetooth set up?

Internet Sharing via wifi

Hi there
My Laptop does not have wireless and I am trying to use my Touch Diamond to connect to the wireless at uni so that I can browse the internet on my laptop at uni. I am having two problems figuring this out.
I can connect to the wireless on my diamond at uni to the work connection like the instructions tell me to. But I cannot seem to use this connection to browse the internet. I am not sure what I am doing wrong.
The next issue I have is that if I start the internet sharing tool I only have two options for the connection to share. The first is Telstra internet and the second is Telstra MMS I do not want to use these connections as i am on prepaid and all my credit would be gone in less than a minute.
I hope someone can give me some ideas as to what I am missing in this setup.
Thanks

Telstra Internet
I have now set the internet connection back to telstra but it doesn't want to load the telstra home page anymore. That is why I gave up last time. I wish I could use wifi when I have it and browse the free sites when I don't Telstra is very annoying.

Information
Hello, soon im gonna write a small guide as to how to use your phone incondunction with a router to allow all devices connected to the router to connect via the mobile phones internet connection. I understand that this is not what your askings as from my experence you will not be able to what your are asking. But if you have a unlimited data allowence then this would be a good option.
you need a router
you need wireless on your laptop (dongle/built in)
and some minor knowledge on setting up networks manually
keep your eyes out for the thread.
regards Vic
stretch4x4 said:
Hi there
My Laptop does not have wireless and I am trying to use my Touch Diamond to connect to the wireless at uni so that I can browse the internet on my laptop at uni. I am having two problems figuring this out.
I can connect to the wireless on my diamond at uni to the work connection like the instructions tell me to. But I cannot seem to use this connection to browse the internet. I am not sure what I am doing wrong.
The next issue I have is that if I start the internet sharing tool I only have two options for the connection to share. The first is Telstra internet and the second is Telstra MMS I do not want to use these connections as i am on prepaid and all my credit would be gone in less than a minute.
I hope someone can give me some ideas as to what I am missing in this setup.
Thanks
Click to expand...
Click to collapse

try to use wmwifirouter - it can use phones wireless and BT/USB connection to pc it will be a router for pc

Unsure
Thanks for your ideas although I might not have made myself clear.
The laptop does not have wireless. And I do not want to use the data connection on my phone as that will cost a fortune.
I wanted to get my phone to connect to the uniwireless and then allow my laptop to connect to the uni wireless for free internet via the phone.
I think I might just give up and buy a usb adaptor for the laptop.
Cheers

wmwifirouter does this !

Thanks
Oh ok, well I would have a look but i don't want to pay for it so im not going to try, especially as every time i have touched my network setup my free browsing stops working.
Thanks

[Q] O2 Tethering and Nexus

Hi all, sorry if this has been answered already but i did search and couldn't find anything to this specification.
I have been using my nexus on the o2 network with unlimited data for a while and have tethered for as long as i have had it.
Recently i have had to rely solely on my phones tethering for internet as my home connection is down for upgrades. For some reason i can no longer tether it connects and windows even shows internet access is available but will not connect to any site.
Using cmd and pinging google it just says net connection refused.
Has o2 blocked my tethering? If so has anyone had this before?
Thanks in advance.

Does direct connection from the phone work? Try to browse a few sites on your phone.
If direct connection works and tethering doesn't - try USB tether, if it also doesn't - then you might be right, even though it sounds very unlikely to happen (technically).