After i overclocked and restarted, the today's screen went blank with nothing except the start button at the top..there's nothing below that.....i tried soft reset and it's still the same, i tried hard reset, then everything went back to the original form when i first flashed......i tried searching this site and using google but couldnt find the answer, please help....thanks everyone...
I also have the same problem. I am not sure if it's the overclocking but I get it a lot when I run htc home and UL together. I think it's because I also run HTC home in the UL?
with 5.0 UL you have to choose one or the other ( htc home or UL... )
and what are you trying to overclock your wing to ( you have to test the phone to see how high it will go - nothing over 299 )..
Related
Hello,
I have a very big problem. I tried some roms for my Tytn2 and was upset because I had always a lots of bugs (especialy with the last Hyperdragon Roms).
So I decided to come back to the french official rom. For the moment, everything was ok.
But I tried to make a backup from my last save and it crashed my kaiser.
Now when I boot my device, I have :
Smart mobility on a black screen
And 3 red lines :
R 1.65.17.56
G 25.83.40.02H
D 3.28.00.00
And that's all, it doesn't start my device. I cant' soft or hard reset, to reboot my device I need to takeof the battery and the problem starts again.
I am very anxious, do you think my Kaiser is dead ? I really need to work, especially theses days ....
All the best and sorry for my english,
Stéphane
News from my dead kaiser ...
When I wait some minutes, there is vertical white and black lines on the screen ...
It's called bootloader and everything other thread is on it (well not really, but so many threads on this). Try flashing back the stock ROM and you should be good.
I am feeling better, I tried to press the camera button with a soft reset and I could access to the 3 colors screen and I am trying again to update my device with the official rom.
Before posting a message, I tried to use the seach engine, but there is so many different messages on this forum that it is hard to find a good answer.
Thnak you for your answer kareem9nba.
Saved ...
Not bricked anymore !!!!!!!! It is working !!!!!!!
I had the same problem once, take out the bettery let it set for a min then put it back in, then hold the camera button full pressed and hit the power button that should bring you to the bootloader then should be able to re-flash the official rom.
Thx mech_supernova,
it is exactly what I did. It should be a great idea to write this in the kaiser wiki.
Glad you got it working
hey everyone, i'm kinda new here, been reading stuff for a while but now that i got a tytn 2 (kaiser wm6.1 rom) and started mucking around with installing new programs i think i broke something
the built in wm6.1 rom that my device came with also has htc home v2.1 builtin
i manually installed htc home customizer 1.0, also tried uninstall/reinstall/reset
not sure what caused it, but now the htc home today screen section is completely blank. it takes up space but shows nothing. resetting themes, settings, soft reset, etc did not work.
i tried twice to download and install htc home 2.1 from an online download. installed on device and also on sd card, but each time i did it the device would go into an endless rebooting loop. it would reset, load up to the today screen, reset, etc etc.
so as far as uninstalling the rom htc home version, i dont think i can do it. plus the rom version seems to have a higher build number then the 2.1 version i see floating around the net.
fyi, i did have htc home and htc customizer working at some point. i used the default htcc themes. but at some point, after a software reset, poof it no longer shows
any suggestions on how to fix this?
HTC Home on WM6.1
My problem is not exactly the same as yours, but I think we're dealing with the same stuff in software and ROM.
My Tilt came from AT&T with only WM6. I had to upgrade it myself to 6.1. When I did, HTC Home came built-in, just like for you. I also downloaded HTC home customizer and installed it...at that point, everything worked fine. The problems started when I was trying to get the music tab to show up on HTC Home. So anyways, even though I already had the built-in Home, I tried to install it again from the cab file HTC Home 2.1. The installation finished, and it told me it had to restart. It did, but then went broke...like yours, my Tilt went into endless rebooting cycles.
However, I have a REALLY serious problem. Mine still won't turn on correctly. So can you tell me how to get rid of HTC Home 2.1, or whatever I need to do, so that my device will run properly again?
I think the solution for you may be to reinstall windows mobile 6.1 from a file online. (You could probably use the same one I did, except I just have to find it again...)
But at this point, I can't even do that, because my phone doesn't even get to the today screen where I can click on stuff. Activesync doesn't work either. HELP?
hard reset
i had to do a hard reset to fix the issue with the rebooting cycle.
right now i'm working on using the manila 2d today screen interface. it looks nice, works good but makes it impossible to add other plugins to the today screen.
i was using the mToday tool to switch between manila and htc home today screens but since htc home is now being a ***** i'm gonna see what i can do with manila to make it better for me.
also using pointui, flash touch flo cube and freestyl.
but if anyone has a quick fix for this htc home issue please post me somethin. i know there are better today screens out there, but simplisity is nice sometimes.
Have recently update to the new ROM for my HTC diamond from HTC HK site (Official room currently available from the HK site).
I've notice after using the phone with Touch FlO 3D turn on for a period of time (not sure how long - - few weeks maybe ), when I tried to send an new sms, the SMS screen become Blank/White and I can't input any phone number or txt and end up have to Hard Reset the phone and re-installing everything again before the SMS work again.
I've tried to restarted the phone few times, also tried to soft reset too, SMS still blank/white screen unless I have to do a hard reset and reinstall everything.
I think this is a bug and not sure if anyone come across with such issue. Just wondering does anyone know how to fix the problem if is happen again in the future??
Thank you!
hi guys
got my htc diamond 2 yesterday. it's nto branded and it's not locked. it has a 6.1 windows on it. tried to do a hard reset but it did not work :| (took sim out and battery)
anyways...
as you imagine, I wanted to instal a nice ROM, so dowloaded 6.5 official ROM
when I try to instal it on my phone, after I press UPDATE, the phone goes on standby, active sync disconnects and the process of updating the ROM doesn't even start.
then I downloaded hard-spl, tried to install it but is says that the device is not connected to PC - although it is connected via active sync...
any ideas on how can I sort this out... your help is much appreciated!
forgot to mention some details...
when I try to instal a ROM, I get Error 260 (No connection)
I tried restarting my laptop, the phone and even tried on a different laptop - nothing works...
about the hard spl, I also instaled the required cab but nothing...
just hard reset manual...
hold both volumes and then hold power button
keep holding down until press "up volume" message appear to erase
after hard reset, use 1.83 HardSPL and after use whatever rom you wish
On e.g. Windows 7 you need to install another driver when TD2 is in bootloader mode (can easily be downloaded using winupdate while in bootloader mode).
BTW hard reset means pressing vol up AND vol down AND once reset button (with stylus).
HTC Touch Diamond2 SD Card ROM flashing
Look here: SD Card ROM flashing
Or Let me Google that for u.
DalvuS said:
just hard reset manual...
hold both volumes and then hold power button
keep holding down until press "up volume" message appear to erase
after hard reset, use 1.83 HardSPL and after use whatever rom you wish
Click to expand...
Click to collapse
thanks for your answer... I have tried doing the hard reset in all the ways, but it is not working.... i have tried with power button and reset button, while volume up and volute down were both pressed.. it does not work...
i've put a sd card in it and tried to run rom from there ... the way it's done is keeping volume down pressed and then turn the phone on.... the thing is that I don't get the tri-colour screen... it boots normaly and loads windows...
this is amazing... nothing seems to work on it...
Hard reset
Device must be turned off:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
hmmm
@S-Line - i have tried on windows xp and vista... and hard reset does not work on my phone :|
@Tom Lenferink thanks for the idea, i've got a card, formated fat32, put a rom on it with name 'TOPAIMG.nbh' and tried to do volume down and turn on the phone... it loads normaly, doesn't go on the coloured screen...
any more ideas guys? I can see 2 things that can be wrong
1) is not hard slp yet
2) buttons don't seem to work, btu they work in windows mobile
fake fake fake
don't bother guys, i just realised that the phone I got is a fine fake after diamond 2.... sorry for the trouble and people who want to buy diamond2, be very carefull.... it looks identical, windows is the same etc
andreti said:
don't bother guys, i just realised that the phone I got is a fine fake after diamond 2.... sorry for the trouble and people who want to buy diamond2, be very carefull.... it looks identical, windows is the same etc
Click to expand...
Click to collapse
Interesting, it means that they even copied the serial number if you could download the ROM from HTC website.
Could you pls post pictures of your phone from front and back side ?
How do you know it is not real TD2 (I mean, what is the difference ?)
Post pictures and I'll do a comparison so others know what to look out for. They're very rarely identical.
Andreti ???
hi guys, I just randomly found this thread. been looking for a diamond2 from second hand. bought one a week ago and had exactly the same problem with flashing. after some time i realised that it was a fake clone ugly piece of junk.
so you asked about the differences, here they are:
- the one i had, had no front camera.
- overall build quality was weird, you could tell just by opening it and removing the batt. all the inside parts were somehow covered/sealed with a ducktape - really not htc style
- terrible screeen - terrible colors, contrast, brightness (my good old s710 has much better display), not calibrated - you had to push 2mm below the actual button, slow cpu (all i know it wast really fast, dont know about the speed of the original, never held it)
- no g sensor, no gps module. not sure 100% but it had a shortcut for external gps and you had to push a button to rotate the home screen (i guess both of these kind of imply missing these features)
- when i tried to download the official fw, imei wasnt recognised - which i think, is the best way to find out. after downloading fw from other sources, i got the 260 error.
peace and be careful
Most clones have a 3.5mp camera and 128mb RAM
hard reset
Just a quick note, I tried to carry out a hard reset as in the manual. I could not get it to work - until I found that if I removed battery, refitted it, then a hard reset worked every time. Read my new post to see why I had to do a hard reset....!!!!!
i currently have a htc touch pro -mighty rom(sprint) and a while ago i once screwed the Touch Screen Digitizer so i bought another one. i just bought a used hero and the screen looks like it is in excellent condition, although i cannot swipe anything on the screen (had a user name and password lock when i got it and so i wiped it) after wiping at the very end i watched as it flashed a message really fast something about screen locked. when i see windows or whatever it is i push menu twice and it appears to unlock the phone as power save mode is all that i can see otherwise so now since i can see the icons but cannot touch anything only the buttons work, my question , is the screen broken? i click the talk button and i get a "sorry , the process android.process.acore has stopped unexpectedly.please try again." i was going to try and install Aloysius 1.0 v2 to see if the talk would work then although it seems alot more difficult to install a custom rom then the touch pro. i tried to find a Android Rooting in 1-click (limited time only… until it gets patched) to no avail
thank for any help
Try re-running the official RUU via your PC. See this thread to download it (scroll down to post #2 for the RUU): http://forum.xda-developers.com/showthread.php?t=694572
Don't worry about following all those rooting steps in the first long post #1. Just scroll down to post #2 and download the .5 RUU file, then run it from your PC with the phone plugged into USB.
It will completely wipe the phone and revert it back to factory stock settings. If your touch screen is still broken/messed up after this, then yes there's something wrong with the screen and you should take the phone back or replace it or whatever.
take it into sprint. hell you may even luck out and get an evo or epic out of it. i hear they are trying to push those phones on customers.
sorry i did not mention that i bought it at a swap meet for $30 and the phone seemed locked and said too many password attempts and the touch never worked , so i wiped it. i noticed on the side of the screen by the voulme controls , looks like some tweeker tried to maybe bull the battery out and did not know how to open the back.lol and tried to pry in that area a kinda bent the shiny piece slightly below the - vol button and cracked that chrome plated piece that seems to be inbetween the screen and the back case. i will still try the RUU and check it out, i never did try to replace the digitizer on the touch since the walkthrough seemed too detailed. i wounder about the hero.
trying to reset using RUU although says, error 170 usb i tried to install HTC sync can cant connect with it either. i dont understand how to properly install the drivers i suppose.
any advise
Does it just have the white HTC screen. And you can use all hard buttons but nothing else???
If so its because your phone was rooted and then someone did a factory reset. It happened to mine. Its a way of them locking you out of your phone after rooting.. I ran the ruu back to 2.1 and then rerooted it.
Try this RUU..
http://www.4shared.com/file/2uQunBaV/RUU_Hero_C_Sprint_2276515_R_si.html
Also you just download the htc sync here..
http://www.htc.com/us/support/hero-sprint/downloads/
Jus10o said:
Does it just have the white HTC screen. And you can use all hard buttons but nothing else???
http://www.htc.com/us/support/hero-sprint/downloads/
Click to expand...
Click to collapse
no the OS seems to be functioning fine , except for everytime i push send it get the "sorry! the process android.process.acore has stopped unexpectedly. please try again"
so i tried to power up holding on to vol + and doing the RUU as well as having the phone as normal as can be and running RUU and i get
error(170) usb connection error
rom update utility cannot connect to your phone.
i installed the file HTC_Sync_2.0.40.exe and ran RUU_Hero_C_Sprint_2.27.651.5_R_signed_release.exe when told powered the phone and clicked next and always get the 170usb error. i still am guessing that the drivers are not installed properly as when i plug in the phone i dont hear the normal usb sound made by the pc. also i never noted that i dont have the offical usb sync cable i have 2 of them , one is shape the same as the area to insert it on the hero, it is the htc touch pro cable . and the other usb cable is the basic one that works for alot of stuff that it fits into, except for motorola`s cell phones to charge them.lol
heeeeeelp
Bringing back more old threads
I am having this exact problem with an HTC Hero. I started before it had ever been rooted. I have rooted, loaded custom roms, wiped everything, ran two diff RUUs, and replaced the digitizer.
If I boot the phone to the HBoot, at the top of the screen it says TOUCH PANEL-fail.
Wondering if it is hardware or software at this point. I had it working earlier today somehow after doing a full wipe, but when i reactivated the phone and started dialing a number to test it it froze up. Rebooted and it was back to the same problem.