As the subject says, I uninstalled pocket contact manager and now my keyboard is totally white but still has the characters on it???
I've tried installing different keyboard cabs and going into settings to change the keyboard to the new ones but it doesn't do anything and I'm left with the same white keyboard with no colour on it whatsoever.
I've even tried soft resetting it after selecting a new keyboard but nothing seems to work
Anyone got any ideas???
Thanks!
try touch pal keybord
familyguy said:
As the subject says, I uninstalled pocket contact manager and now my keyboard is totally white but still has the characters on it???
I've tried installing different keyboard cabs and going into settings to change the keyboard to the new ones but it doesn't do anything and I'm left with the same white keyboard with no colour on it whatsoever.
I've even tried soft resetting it after selecting a new keyboard but nothing seems to work
Anyone got any ideas???
Thanks!
Click to expand...
Click to collapse
This is posted in the wrong forum (not ROM related), but it sounds like you don't have a keyboard skin selected. You'll have to change it in the Input options. This is a good one: http://forum.xda-developers.com/showthread.php?t=329045
Thanks for the info guys but when I go to settings then input and select anything and click OK it just goes back to PCM Keyboard everytime so it doesn't matter what keyboard I install it won't let me use anything else?????
Anyone got any ideas??
I second this.. Ive messed mine up too.. Help it looks crap!
using duttys wm6.1 wwe on a Orange tytn II and dont really want to re-flash
*bump* aww c'mon anyone know how to fix the above?
I had the same issue a little while ago. TBH the problem stuck until I reflashed
Yup had to reflash. Was the only solution....
Try using SIPChange.
Related
Has anyone else had the following problem? I've installed alternate keyboards (HTC, Pocket CM .12, TouchPal) and none of them seem to work. They show up in my drop down, but when I select them the Tilt will still use the default keyboard. I even tried changing it using the input selection under settings to no avail. All of the screen writing selections work fine.
Any suggestions?
try a soft reset if you haven't. or try installing to main memory
Tried multiple soft resets, reinstalling all of the above and placing in main memory.
nkawtg said:
Tried multiple soft resets, reinstalling all of the above and placing in main memory.
Click to expand...
Click to collapse
I am having the same problems. Anyone figure out a fix for this?
thanks!
Ive had the same problem... i just gave up and went on with the norm...
I've had the same problem before. I have several onscreen keyboards installed and sometimes I can't access most of them. They just go to the default onscreen keyboard. A soft reset typically fixes the problem. For a little while at least. Kinda weird.
SIP problem
the same here :/
--
hoot
maxh said:
I've had the same problem before. I have several onscreen keyboards installed and sometimes I can't access most of them. They just go to the default onscreen keyboard. A soft reset typically fixes the problem. For a little while at least. Kinda weird.
Click to expand...
Click to collapse
+1
exact same thing here with touchpal v1 and v2 as well as pocket CM keyboard, but any keyboard built into a rom seems to work fine all the time...
Got your answer
Google up IM Selector, install it to the main memory and change the SIP default in their dropdown menu. Softreset. Bam, whatever keyboard you use.
IM Selector doesn't work on my Device
I found the IM Selector on http://www.freewareppc.com/utilities/taptapkeyboard.shtml but it doesn't work on my XDA Orbit 2 (WM6). Maybe the HTC Touch Keyboard is the problem but I can't uninstall it.
Try sipchange
I installed a new IM (Calligrapher) and I experienced the same problem. My solution was to use the utility SIPchange and it worked fine for me.
You can find it here: http://www.pdagold.com/software/detail.asp?s=1312
Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?
Hi everyone,
I've tried to search in the forums but I couldn't find it.
It's not a really big issue, but it annoys me a bit..
I found that the HTC keyboard's font looks a bit different after soft resets. The font looks a bit thinner than it is supposed to. (Screenshot attached)
However, after toggling between Compact QWERTY back to Full QWERTY, the problem is gone.
This only happens with some ROMs that I've installed .. now I'm using official 1.93.707.1 WWE .. it used to happen with the elite 3.0 as well.
Has anyone experienced this?
techdave said:
Hi everyone,
I've tried to search in the forums but I couldn't find it.
It's not a really big issue, but it annoys me a bit..
I found that the HTC keyboard's font looks a bit different after soft resets. The font looks a bit thinner than it is supposed to. (Screenshot attached)
However, after toggling between Compact QWERTY back to Full QWERTY, the problem is gone.
This only happens with some ROMs that I've installed .. now I'm using official 1.93.707.1 WWE .. it used to happen with the elite 3.0 as well.
Has anyone experienced this?
Click to expand...
Click to collapse
I got the same problem with the 1.93 original dutch rom.
Still no solution here?
The same happens to me with original Vodafone ES ROM (1.93.164.2 ESN)
Noby has a solution for this problem?
ben®nie said:
Noby has a solution for this problem?
Click to expand...
Click to collapse
Omg WHY does it matter?
I have another very annoying issue with my "Full Qwerty" keyboard : it stays locked on the symbol tab, even after a soft reset, and the "ABC" button does not work anymore. Is there any way to "reset" all the settings of that keyboard (perhaps by deleting some reg keys)? Thanks in advance!
This has happened to me, too. Keen for an answer. Thanks
bugmenot said:
Omg WHY does it matter?
Click to expand...
Click to collapse
Aswers like this is just what this community needs....
ontopic:
The font problem occurs when you use a ROM that does not has the Manila plugin. If you do have it you might want to hide and show your keyboard to fix the issue.
I've attached a CAB that makes the font change from Helvetica to Segoeui it should make look your keboard just fine.
It's part of my personal tweaks so don't know where the original came from...
malagem said:
I have another very annoying issue with my "Full Qwerty" keyboard : it stays locked on the symbol tab, even after a soft reset, and the "ABC" button does not work anymore. Is there any way to "reset" all the settings of that keyboard (perhaps by deleting some reg keys)? Thanks in advance!
Click to expand...
Click to collapse
I had exactly the same problem after installing Pocket CM keyboard, I uninstalled it and the problem went away
I dunno if you have it installed though... Just thought I'd mention it...
mccune said:
I've attached a CAB that makes the font change from Helvetica to Segoeui it should make look your keboard just fine.
It's part of my personal tweaks so don't know where the original came from...
Click to expand...
Click to collapse
I've tried the .cab. Thanks for that.. the font now looks close to the original one,..almost..but not the same..
Still looks ok tho, I'm going to use it for the time being.
I think we're heading to the right direction.
owziee said:
I had exactly the same problem after installing Pocket CM keyboard, I uninstalled it and the problem went away
I dunno if you have it installed though... Just thought I'd mention it...
Click to expand...
Click to collapse
Yes, I had. I just uninstalled it and my Full Qwerty SIP is back to normal. Thanks a million for the hint. Now we need to go after Tene and ask him to fix that bug ;-)
I've gone through multiple Roms, different versions of hyperdragon III, and different versions of PDAcorner. When I try to select a different keyboard, it loads for a second, then goes back to the default. The only keyboards that work are other defaults, such as Block Recognizer, Letter Recognizer, and Symbol Pad.
SOMETIMES PCM keyboard works, but NEVER has any of the diamond keyboards every worked.
I've even tried SIPchange, but the same thing happens. I assume the same has happened to you guys too? did you ever fix it?
thanks!
Is it just me?
How many of you use the Diamond Keyboard, or keyboard other than the default?
default IM
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
The default cab is the ticket...it works when everything else fails. I don't even bother with the other stuff now. If the sip won't stick, I just install that cab and select it. A soft reset later and you are good to go.
Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
I'm not sure what you mean by default im cab for wm5... lol
mikeeey said:
I'm not sure what you mean by default im cab for wm5... lol
Click to expand...
Click to collapse
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
parleyp said:
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
Click to expand...
Click to collapse
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
default im selector instructions
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
.
edit:
sipchange and imSelector did nothing... could someone kindly link me to the 2 keyboards? lol
thanks.
.
edit: (5 seconds later)
PCMkeyboard just quit working again...
Click to expand...
Click to collapse
1. install the default im wm5 cab above
2. install the opal keyboard you want
3. start > programs > im selector > opal keyboard
4. start > settings > personal > input > opal keyboard
5. soft reset
-----
you may need 2 soft reset twice before it cooperates. if you have your phone password protected, the default keyboard you selected will never show until AFTER you enter the password.
only RARELY do i get a glitch now, and a reset usually fixes the problem.
let us know!
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
Click to expand...
Click to collapse
I am in the same boat as you and the only keyboard that I have gotten to work is resco keyboard.....I have same exact problems as you...did you ask SJ about it....
SJ's opal keyboard
im having problems attaching files, but SJ's keyboards can be found here.
apply the default im instructions and a couple of soft resets later, you should be good 2 go.
I played with a Samsung Omnia yesterday, I really liked the keyboard SIP, is it possible to download and get to work on our kaiser's.
not sure...
Hi guys, I recently noticed that i cant use any of the stock keyboards for texting because when i try to type, it only shows as numbers or on the full qwerty keyboard wont let me go to the "ABC" view and wont let me use regular letters, or type. If anyone could help it would be great because its very frustrating!
I had the same yesterday, after updating to 2.03.404.3 NLD !
Don't know if it has anyting to do with this rom... I also changed some settings by diamond tweak. Today the problem is gone, but I don't know what caused it :-(
Bump, its still an issue till this day i need help fast!
Download and install this cab and you will be fine....
Here You Go...
Iyhab said:
Hi guys, I recently noticed that i cant use any of the stock keyboards for texting because when i try to type, it only shows as numbers or on the full qwerty keyboard wont let me go to the "ABC" view and wont let me use regular letters, or type. If anyone could help it would be great because its very frustrating!
Click to expand...
Click to collapse
Hi,
I had the same problem and for me it was an issue with T9 : you'll have to disable T9 SIP with Diamond Tweak and that bug will be over.
regards
Just want to say thanks to all the nice folks here - have joined up the other week after getting my new Diamond - but as yet have had no reason to post as any questions I could have had (including this one!) has been answered many times over!
Cheers!