Application problems - PDA2, XDA IIi, 2020i General

Have an xda11i and when i install tomtom navigator6 another program that i have already installed comes up as "not a valid pocket pc application"
is there anyway around this.

Try re installing the other app after tomtom it may be a shared supporting file conflict where one app needs a newer version that the other app does not recognise

robsno said:
Try re installing the other app after tomtom it may be a shared supporting file conflict where one app needs a newer version that the other app does not recognise
Click to expand...
Click to collapse
or your installing the WRONG version of tt6 make sure its the 2003 version not the wm5/6 version
its not another program its the phone saying its not compatable wich means your installing the wrong version

Sorted,Thanks for the Advice
Transfered tt6 onto the Sd card and both work with no clonflict

Related

Destinator "unknown device processor type 2577 or OS(33

"unknown device processor type 2577 or OS(330)"
This error comes up whenever I try to load new maps from the Destinator CD. Anybody seen it before?
I have loaded software/maps from this CD loads of times before and I have another copy and get the same results.
I've tried a differant desktop/xda/SD card
I can sync with outlook
I can load any other app
UK ROM 3.17
Any help would be really great.
Dan.
Which version of active sync are you using? I had problems with versions above 3.5 You can simply unzip the maps onto your sd card into the appropriate directory and the software finds them.
xda-rocks said:
Which version of active sync are you using? I had problems with versions above 3.5 You can simply unzip the maps onto your sd card into the appropriate directory and the software finds them.
Click to expand...
Click to collapse
Tried 3.5 and 3.7
I friend gave me another copy of the cd and that worked. Really strange as I had 2 other copies of the cd and both were working.
Thanks for your help.
For anybody else using the latest Destinator software, make sure you are using your GPS in Sirf mode, Destinator is VERY flaky in NMEA mode, lost signal, slow updates, freezes etc.

Navigator 6

An trying to install navigator 6 from CD. Keep getting message that I need to update rom. Tried to do that yesterday, got into trouble and you guys saved me (thanks again) ,but still cant install navigator6. Am using TyTNII with rom version 1.81.701.1WWE radio1.27.12.11. Does anybody have any ideas?
cutter1954 said:
An trying to install navigator 6 from CD. Keep getting message that I need to update rom. Tried to do that yesterday, got into trouble and you guys saved me (thanks again) ,but still cant install navigator6. Am using TyTNII with rom version 1.81.701.1WWE radio1.27.12.11. Does anybody have any ideas?
Click to expand...
Click to collapse
Its a known issue and it doesn't matter what radio you are using. There is a fix, but it takes longer and is more of a hassle. First I don't know if you have signed up at MyTomTom.com yet or not, but you have to because the version that does work is not English speaking voices, so you will have to download an English voice. Go to the link in my signature under Programs, its called "Working TomTom", download it and install it to the device. If you need help getting the voices set up just let me know and I will walk you through it.
TYKDKobes finally got that installed. hopefully its better then the other navigation softwares I've tried so far.
Thanks will try this, finally got Nav 5 installed, but would like version 6 for newer maps. Sorry to be a bit thick, but do you mean to install the file I downloaded onto my device and the try to install Nav 6?
cutter1954 said:
Thanks will try this, finally got Nav 5 installed, but would like version 6 for newer maps. Sorry to be a bit thick, but do you mean to install the file I downloaded onto my device and the try to install Nav 6?
Click to expand...
Click to collapse
That CAB is TomTom Navigator 6. So just install it from your device.
Got it working, downloaded voices, Thanks heaps for you help!
In my signature is a link for all the free TomTom voices instead of trying to find them all. Just download the Zip file and extract it to your computer. You will need to REPLACE your current "voices" folder with this one. For instance my TomTom is installed on my Device, under Programs, Navigation, and in that folder you will see another folder called "voices" that is where TomTom stores its voices. All you are doing is taking the one you downloaded and replacing it with the old one. **this will replace any current downloaded voices**
"the zip file is located under cabs"
will install and test the application.
thanks
KDKobes said:
Its a known issue and it doesn't matter what radio you are using. There is a fix, but it takes longer and is more of a hassle. First I don't know if you have signed up at MyTomTom.com yet or not, but you have to because the version that does work is not English speaking voices, so you will have to download an English voice. Go to the link in my signature under Programs, its called "Working TomTom", download it and install it to the device. If you need help getting the voices set up just let me know and I will walk you through it.
Click to expand...
Click to collapse
Hi, can you help me, I'm trying to install Tomtom 6 to my HTC cruise. I keep getting the message to update my ROM, I tried to follow the advice in this thread, but have failed. Can you walk me through it? Cheers
what is the speed of tomtom like on your device mate? mine is painful, screen refreshes every 1.5 seconds, whereas i get 15fps on another sat nav program (which actually holds reception better than tomtom too!)
TomTom support were helpful, told me to hard reset and try again. I think its a software issue with 6.032.
The other sat nav programs arem much more graphic intensive too, so i doubt its the graphics drivers.
drkozman said:
Hi, can you help me, I'm trying to install Tomtom 6 to my HTC cruise. I keep getting the message to update my ROM, I tried to follow the advice in this thread, but have failed. Can you walk me through it? Cheers
Click to expand...
Click to collapse
Which version of TomTom did you download and install. Usually that error appears when you download the TomTomWWE(World Wide English). The one you need to download and install if you get that error is the Working TomTom CAB which can be found in my signature under CABS, Programs. Should work then.
how do I install the program from you're cab to my HTC cruise? I'm a bit of a novice at this, sorry.
Download the cab file to your computer, and copy it to your Device or Storage Card. Remember where you place the cab file because you will need to open it from you Phone using File Explorer. Now navigate to the file and click on it. It will automatically start to install, usually it will ask you to install to the Device or Storage Card, but this CAB will just install to the Device.
when I do this I get a message 'there is no application associated with..' run the application first, I can't get the tomtom application off my CD? sorry for being such a pain. Thanks for you're help.
flashy said:
what is the speed of tomtom like on your device mate? mine is painful, screen refreshes every 1.5 seconds
Click to expand...
Click to collapse
Check your GPS speed in TomTom.
Go > Change Preferences > Show GPS Status > Configure > Oter NMEA GPS receiver > GPS baud rate > COM4
The GPS baud rate should be between 4800 and 9600, if its too fast mine exhibits the jerkiness as described in your post.
drkozman said:
when I do this I get a message 'there is no application associated with..' run the application first, I can't get the tomtom application off my CD? sorry for being such a pain. Thanks for you're help.
Click to expand...
Click to collapse
Kinda confused now. What do you mean you cant get the application off your cd? If you have downloaded the cab then you dont need the CD. After moving the cab to your phone go open it, by using your phones file explorer program(single click or double click) should automatically install itself. have you made it to that point?
This is also a great resource to TomTom 6 http://forum.xda-developers.com/showthread.php?t=330235
I downloaded the cab files from you're signature and then had a list of files which weren't associated with any program (they had the generic icon next to them) I then put all these files on my micro SD and put in my phone. I then went to these files on my phone using file explorer and there was still a list of generic icons. Maybe I did something wrong in the download. I downloaded with winRAR and extracted all the files to a folder on my desktop. I really appreciate you helping me, thank you.
KDKobes said:
Kinda confused now. What do you mean you cant get the application off your cd? If you have downloaded the cab then you dont need the CD. After moving the cab to your phone go open it, by using your phones file explorer program(single click or double click) should automatically install itself. have you made it to that point?
This is also a great resource to TomTom 6 http://forum.xda-developers.com/showthread.php?t=330235
Click to expand...
Click to collapse
I downloaded the cab files from you're signature and then had a list of files which weren't associated with any program (they had the generic icon next to them) I then put all these files on my micro SD and put in my phone. I then went to these files on my phone using file explorer and there was still a list of generic icons. Maybe I did something wrong in the download. I downloaded with winRAR and extracted all the files to a folder on my desktop. I really appreciate you helping me, thank you.
drkozman said:
I downloaded the cab files from you're signature and then had a list of files which weren't associated with any program (they had the generic icon next to them) I then put all these files on my micro SD and put in my phone. I then went to these files on my phone using file explorer and there was still a list of generic icons. Maybe I did something wrong in the download. I downloaded with winRAR and extracted all the files to a folder on my desktop. I really appreciate you helping me, thank you.
Click to expand...
Click to collapse
No these files dont get extracted before moving to your phone. When downloaded the file should be a blue file folder icon called a .CAB. Once downloaded take that exact file and move it to your phone. Here is the link to the cab http://www.4shared.com/file/47123724/832a2d34/Working_TomTom.html
KDKobes said:
No these files dont get extracted before moving to your phone. When downloaded the file should be a blue file folder icon called a .CAB. Once downloaded take that exact file and move it to your phone. Here is the link to the cab http://www.4shared.com/file/47123724/832a2d34/Working_TomTom.html
Click to expand...
Click to collapse
Hey it worked, you're a dead set legend, thanks a lot mate

How to install Garmin if it wont install itself?

I got the latest garmin XT from the garmin site for my Tilt, and ran the installer on my pc. usually, when i put the memory card into the device, it automatically pops up with a window and asks me if i want to install it and where.
not this time though. and now i cant figure out how to actually install it. every file that i pick from the garmin files on the memory card doesnt actually install it properly. it doesnt show up in the programs screen, nore does it even come up in the manage programs screen. it works, but i have to use file explorer to actually launch the exe. its not really installed!
im using the L26 V8 lite rom.
please help!
I had the same problem on my tilt, I am using death v4 for my rom. I thought that I accidently downloaded the nokia verson or something cause nothing looked normal after it "installed". I don't know what to do either
working on dutty
Just info really...i'm on dutty's June release and Garmin installs and functions fine. You might want to consider this plus the latest SPL with being ROM being very smooth.
i have the latest hardspl. dutty's latest releases are too buggy.
just tried it with L26 V7, same.
No one knows how to properly manually install??
Did it create a folder on your storage card called 2257? If so, is there an autorun file in there?
Yeah the 2257 folder is there, tried to run the autorun file, still didnt actually install it
aphexacid said:
Yeah the 2257 folder is there, tried to run the autorun file, still didnt actually install it
Click to expand...
Click to collapse
hmm thats odd.. are you sure you have all the right files in the Garmin folder on your card?
Yeah the 2257 folder is there, tried to run the autorun file, still didnt actually install it
Click to expand...
Click to collapse
Take your storage card out, then put it back in. Does autorun start?

Installing tomtom 7

Great, here we go again!
I've been trying to install tomtom 7 on my replacement HTC DIAMOND after successfully installing it on the first phone but it's just wont find the maps.
The same files that I used to install on the initial diamaond and the same ones i'm trying to install on the new device.
The meta file has been created and all that stuff successfully, copied all the files the the internal storage, get my device id to create the meta file, copied the file created back into the map folder, start tomtom "no maps found".
Anyone got any idea what I'm doing wrong or is it that the files used (maps) have already been installed on a previous device?
cheers
You have a new device so a different devicecode. You need to contact tomtom support for a new mapcode.
From the procedure he describes I don't think that this is actually legal...
Sayuuk said:
From the procedure he describes I don't think that this is actually legal...
Click to expand...
Click to collapse
You sure its the same version of TomTom 7. Tomtom 7 stand alone VGA version is actually different (in terms of meta) than TomTom 7 for HTC Diamond.
Also, ensure your device ID has not changed.
sony007 said:
Great, here we go again!
I've been trying to install tomtom 7 on my replacement HTC DIAMOND after successfully installing it on the first phone but it's just wont find the maps.
The same files that I used to install on the initial diamaond and the same ones i'm trying to install on the new device.
The meta file has been created and all that stuff successfully, copied all the files the the internal storage, get my device id to create the meta file, copied the file created back into the map folder, start tomtom "no maps found".
Anyone got any idea what I'm doing wrong or is it that the files used (maps) have already been installed on a previous device?
cheers
Click to expand...
Click to collapse
Be aware of that the maps must be in the first level of the folder, not like
maps/maps only maps or whatever your mapfolder is called, usually the name of the map. This is a common mistake.
halloj said:
Be aware of that the maps must be in the first level of the folder, not like
maps/maps only maps or whatever your mapfolder is called, usually the name of the map. This is a common mistake.
Click to expand...
Click to collapse
Yeah - just dump map folders in the root of the Internal Storage/storage card area
Yeap, the maps are in the first level folders on the storage card with the folder for voice & the raster folder.
So would the general consensus be that it should work on the new device ? I mean bear in mind I have installed it on the other device before and now I'm doing the same process on the new device and following the instuctions down to a T.
Hi, as far I know... After installing TomTom 7 you will have a "filename".bif in Program files\Navigator
open the .bif file and you will see your device code, use the code and you should find the cards.
Greetings Roel
warez again - just pay for the damn software and you have a trouble fee install

Any suggestions for installing SPB Mobile Shell?

I have a stock ATT Tilt, with the stock ROM (6.0)
I am trying to install SPB Mobile Shell. I have never used the software before and downloaded the trial. Each time I try to install the CAB from my device, it is unsuccessful.
Any suggestions? (And yes, I have redownloaded the software and tried to install it a number of times)
Thanks
freddiemac1 said:
I have a stock ATT Tilt, with the stock ROM (6.0)
I am trying to install SPB Mobile Shell. I have never used the software before and downloaded the trial. Each time I try to install the CAB from my device, it is unsuccessful.
Any suggestions? (And yes, I have redownloaded the software and tried to install it a number of times)
Thanks
Click to expand...
Click to collapse
where are you trying to install it too? does it say anything else besides unsuccessful?
freddiemac1 said:
I have a stock ATT Tilt, with the stock ROM (6.0)
I am trying to install SPB Mobile Shell. I have never used the software before and downloaded the trial. Each time I try to install the CAB from my device, it is unsuccessful.
Any suggestions? (And yes, I have redownloaded the software and tried to install it a number of times)
Thanks
Click to expand...
Click to collapse
Never had this problem, are you using the right version?
I have downloaded it three times from spb's own site, both to my computer and directly to my device. (I don't have a windows machine, so I am downloading the CAB files). I even downloaded the EXE file and extracted the CAB from it.
Each time as I click on the CAB file (on my device), it says Installation was unsuccessful.
Any thoughts?
Mobile Shell
Have you made sure to check it's box in the "today" settings page to activate it on "today". Also remember to uncheck everything else on that page.
It's not installed...so there is nothing to check. Just trying to figure out how to install...
freddiemac1 said:
It's not installed...so there is nothing to check. Just trying to figure out how to install...
Click to expand...
Click to collapse
i'm having the same problem! i can't find any way to fix it either!
Go to Settings/Today/ Items and uncheck all items on your today screen. Load the SPB onto your SD Card, however when you click it and it then prompts you to the location installation, leave it on Device.
asfoor said:
Go to Settings/Today/ Items and uncheck all items on your today screen. Load the SPB onto your SD Card, however when you click it and it then prompts you to the location installation, leave it on Device.
Click to expand...
Click to collapse
done that and still does not work
here you will be OK with this trial version...
http://rapidshare.com/files/177073963/SpbMobileShell2.arm.cab
Thank you so much. It finally installed....but
However, it is only v. 2.0.0. Anyone know where to get the latest version THAT WILL INSTALL?
You can download direct from SPB themselves, or a software provider like Handango lets you download the trial version.
I have seen the same issue with installations of this too. I found that the installation .cab file was too small and so (althought it 'appeared' to install) it failed. I got round the problem by downloading directly from the PC and then moving the cab to the SD card before installing from there.
This would not account for your failed PC installation but may be worth a go if you still find it an issue.
Regards
Tony
Hi,
I had the same problem last night, the CAB would not install from the SD card or Main Memory.
In the end i downloaded the EXE from SPB and installed via Windows Mobile Device Center (old ActiveSync ) and it was fine.
Cheers
Dan
Hello...i am new in windows mobile, and my kid's cp running 6.1 in asus p320 asking me to help her to change it in a finger friendly phone, but problem was that everytime i install spb direct from the spb site, got an unsucccesful message at the end of the installation, were it took me so much time just to find out (not to mention it stuck from 43% installation indicator) its unsuccesful. tried to install it to the device itself but says not enough memory, so i used my storage card instead. Pls help and tell me exactly how to install it.
thanks and more power.

Categories

Resources