I have got unlock code from At&t for tilt...i tried it 4 times but it says invalid code .. what could be the reasons ? i have only 1 try left...is there any way to reset it or any other way .
How long i have to wait .. until timeout ?
or you could use the searchbox for sim unlocker and do it free of charge
n3xt said:
I have got unlock code from At&t for tilt...i tried it 4 times but it says invalid code .. what could be the reasons ? i have only 1 try left...is there any way to reset it or any other way .
How long i have to wait .. until timeout ?
Click to expand...
Click to collapse
did you get your unlock code from att or through third party?? if you are an att customer (and in alot of cases even if you are not) you can get the unlock code by "simply calling" att. They are required to provide that to you as long as you have been a customer for i believe atleast 3 months. Even if you are under 3 months just be polite to the operator and they will give it to you. I got mine the second day i had my tilt (not that i needed it but just wanted to see how cooperating they were), all i did was tell them that i am going to be traveling oversea's next month.
If all this fails like above op suggested you can use the kaiser simunlocker from this forum (as suggested search for it) or since i am feeling extremely nice here is the link :
http://forum.xda-developers.com/showthread.php?t=361039
send a donation to jockyw if you think his hardwork helped you (which it will trust me).
didnt he just say he got it from at&t.
i would give at&t a call again in case there was a mistake in the imei or the unlock code. or like others have suggested, using the unlockers available in these forums
XtreMe_G said:
didnt he just say he got it from at&t.
i would give at&t a call again in case there was a mistake in the imei or the unlock code. or like others have suggested, using the unlockers available in these forums
Click to expand...
Click to collapse
i have used Kaiser SIM/CID Unlocker & Changer but after step2 i ave got black screen after at&t logo n 3G it shows only black screen... ..any help i am totaly new to this... how can i flash back to my previos rom and radio..Thank You All for ur Response
you need to flash a wm6.1 rom to use this unlocker, if you want to go back then flash your original radio
Can You Plz Help me with WM6.1 ? Where can i find wm6.1
Have a look here.
Right at the top of the page you have the Tilt 6.1 roms from AT&T.
Psi
PsiDOC said:
Have a look here.
Right at the top of the page you have the Tilt 6.1 roms from AT&T.
Psi
Click to expand...
Click to collapse
Thnx PsiDOC .. if i use HTC WM6.1 Rom .. wil it be ok ?
And Can i downgrade to my orignal rom if i want to ?
n3xt said:
i have used Kaiser SIM/CID Unlocker & Changer but after step2 i ave got black screen after at&t logo n 3G it shows only black screen... ..any help i am totaly new to this... how can i flash back to my previos rom and radio..Thank You All for ur Response
Click to expand...
Click to collapse
Good job guys send the noob down the yellow *** brick*** road
when i flash other radio to sim unlock my Tilt .. it gives me the blank screen after at&t start up logo ... i tried both unlockers by jockyw2001 and olipro but the same prob after flashing patched radio tilt show only blank screen.. am i doing anything wrong ?
fgs man.......spend a little time reading instead of just jumping into this or you're just gonna **** up you device, and please stop double posting
XtreMe_G said:
fgs man.......spend a little time reading instead of just jumping into this or you're just gonna **** up you device, and please stop double posting
Click to expand...
Click to collapse
ok..now i ll stick here..
My
ROM : 1.62.502.0
Radio : 1.27.14.09
Protocol : 22.45.88.07H
what should i do to unlock my device ?
read the whole unlocker thread......whichever one you are using, you will find that many ppl have had the same problems that you had, and there are solutions for it posted.
and for your own sake, read this here to learn more about flashing you device
http://forum.xda-developers.com/showthread.php?t=369282
Related
i want to unlock O2 XDA IIi of O2 brand from England? who help me? thx
unlock
do a search -- you'll find (itsme's?) excellent unlock tool
XDA2i Rom Unlock
Hi Blackfoot,
is this: ExtendedROMUnlocker.arm.CAB
The right tool to unlock the XDA2i ROM?
This is the only file I found, but I am afraid to destroy my ROM, if it is not the right Prog.
Re: XDA2i Rom Unlock
Bibifrine said:
Hi Blackfoot,
is this: ExtendedROMUnlocker.arm.CAB
The right tool to unlock the XDA2i ROM?
Click to expand...
Click to collapse
Of course not my friend....the tool u have is just to unlock the EXT ROM....
Go there(click the link),u will find another itsme tool(when it comes to unlocking,it's always itsme....he's the best :wink: )..
READ and download http://wiki.xda-developers.com/index.php?pagename=xdadev_all_unlock
RAGO :lol:
so that means you can unlock a xda that has a contract right, cause where i live if u get a phone with a contract on it u cant use another sim card in it, i want to get rid of that so i can???
No, this is a different story.
In my case the Extended ROM is locked and you have a SIMlock on your device. But I am sure you will find a solution in this Board.
8)
huh ?
The tool by itsme (The xda unlock all tool) will remove the lock that stops you from using a different network.
Ie ... Your phone is locked to O2 network UK, use the tool to unlock the phone so you can use an Orange network UK sim card instead.
ive tried the unlock for xda 11i, not had any luck gives error message, can any body help me
http://forum.xda-developers.com/attachment.php?attachmentid=24704&d=1128641650
put that on your XDA and run it on the xda. will work fine.
erm.. i have just got hold of a alpine/2020i, but this program wont run on it.
edit....
the 1.6 version found at the wiki runs perfectly, but the 1.6.138 keeps saying "this is not a valid pocket pc aplication"
I have tried downloading the latest version of this tool xdadev_all_unlock-v1.6.exe when I run it on my O2 XDA 2i as described it comes up with an error, see error log.
When I read the error log it says:
simlock answer invalid simlock answer.
error getting current lock status
xdadev_all_unlock failed
ril ioct 0xc2: 00000000
ril ioct 0xc6: 00000000
I tryed resetting my XDA but the same thing happens.
Any ideas.
NB this is an 02 phone I had on contract until about six months ago, but I cancelled the contract. It hasn't been used as a phone since. I am keen to use it abroad with a foreign sim.
Of the two progs referenced in the itsme post i have had more luck with the earlier version. v1.6.38 failed to unlock two XDA IIi but he v1.5 was successful in both cases
Thanks 4 That
MrDag0n said:
http://forum.xda-developers.com/attachment.php?attachmentid=24704&d=1128641650
put that on your XDA and run it on the xda. will work fine.
Click to expand...
Click to collapse
My Mates Had this PDA (O2 XDA IIi) for a few years now and gave it me the other month. In all that time, he didn't manage to unlock it. A friend I sat talking to the other day referred me to this site, and within 5 minutes of looking from the gogle link, I've managed to get it unlocked!!!!!!!!! YAY!!!!!!!!!!!
This is a mint piece of software! A definite must het for anyone who doesn't usually use O2 as their main network. (or any network for that matter! LOL!)
Thanks to ITSME!
This thread is a getting bit old but I'd like to add my thanks to all those (itsme, I think) that contributed to the xdadev all unlock and to reassure those that follow me that it is one of these things that just works!
I put the program on a SD card plugged it into my O2 XDAlli and ran it. Instant results no messing!
Thanks guys!
Bill
thEsE files are only for the HTC WIZARD
this post is in response to the request from this thread ;http://forum.xda-developers.com/viewtopic.php?t=52521&postdays=0&postorder=asc&start=0
Upgrading only the radio or the splash and extended-rom will not wipe any setting from you device. It only updates the respective part that you are flashing.
This is a proper extended-rom[for sumiter rom wizard custom AKU 2.3 ROM but it should work with any 2xxx rom].nbf is not a folder containing the files
To install unzip the folder and run the ROMUpdateUtility_Wizard_NoID.exe
You will not lose any setting that you have in your rom. It simply updates the extended-rom.
when’d you decide to hard reset you device again the extended rom will load automatically as in the official rom , there it is .no Cingular stuff .
download my extended rom from here EXTENDED-ROM-FOR NON-CINGULAR-USERS
how to install? simply run the ROMUpdateUtility_Wizard_NoID.exe that is inside every splash screen and extended rom folder[/b]
more splashes coming soon.please post your requests and if you like my work please say thank you a least .
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
gizm0luvsu said:
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
Click to expand...
Click to collapse
no it should stay the same.
Thanks !
Hi Faria,
Thanks for this handy utility. Are you still working on a kind of manual about cooking your own rom?
Nico
faria, thank you for your Vodafone splash screen its awesome!
I wanted to ask you is it possible to have HTC logo?
To gooshy
First you should cid unlock before doing anything using the lokiwiz tool, then flash the new rom .as for how does my extended-rom fixes the problem of the guy with the £40 bill is simple;Is phone was dialling out to get is email and because he installed the default extended-rom he has all the Cingular gprs/dialup settings to access email/web ,so is device was using the American settings to dial out from the uk to get is mail. since I have remove such settings from my extended-rom , there is no danger of any bills .
Click to expand...
Click to collapse
Thankyou faria for your response. This has put my mind at ease.
I have spotted a slight problem since updating. When I send a text message, the receiver gets the message twice. Im not sure if this is a ROM issue, a setting issue or a T-Mobile issue. Just wondered if anyone has had this problem before?
Thanks for all your work.
Cheers.
raven2000 said:
faria, thank you for your Vodafone splash screen its awesome!
I wanted to ask you is it possible to have HTC logo?
Click to expand...
Click to collapse
HTC LOGO HAS BEEN UPLOADED TO THE FIRST POST
gooshy said:
To gooshy
First you should cid unlock before doing anything using the lokiwiz tool, then flash the new rom .as for how does my extended-rom fixes the problem of the guy with the £40 bill is simple;Is phone was dialling out to get is email and because he installed the default extended-rom he has all the Cingular gprs/dialup settings to access email/web ,so is device was using the American settings to dial out from the uk to get is mail. since I have remove such settings from my extended-rom , there is no danger of any bills .
Click to expand...
Click to collapse
Thankyou faria for your response. This has put my mind at ease.
I have spotted a slight problem since updating. When I send a text message, the receiver gets the message twice. Im not sure if this is a ROM issue, a setting issue or a T-Mobile issue. Just wondered if anyone has had this problem before?
Thanks for all your work.
Cheers.
Click to expand...
Click to collapse
your problem is very rare but it is know across roms im afraid i dont know the cause.
this is a network issue, happens to me all the time sometimes i get the msg 4 times in a row lol THANK GOD FOR UNLIMITED TXT
great work .. thanks
could u make it import any image into the tool?
like insert "MyOwnBestIspWhatsoeverSplashLOGO"?
update
update
I have successfully created a new test extended rom for any wizard with 2xxx rom versions regardless of the carrier.
the best thing is that this extended rom has carrier settings in it for UK/AUSTRALIA /SOUTH AFRICA/PORTUGAL/NEW ZEALAND/NORWAY/AND Nederland’s ,so wend the extended rom loads a dialog comes up and you chose the particular carrier setting that you want, after selecting it just install automatically.or you could just press cancel and no carriers setting will be isntalled but the remaining items will be.nice.
I have also manage to hack the program called [wm5torage] so now it can be installed from the extended rom ,I have also made the program 30% lighter and it works flawless
Also it has registry setting on it like; gps icon back, performance tweaks etc, etc...
At the moment imp putting a few more settings programs into it like a tiny program that actually closes the applications and it is only 4kb.
It is not ready to public release. But will be soon if anyone is interested. Are you?[/
samimayer said:
great work .. thanks
could u make it import any image into the tool?
like insert "MyOwnBestIspWhatsoeverSplashLOGO"?
Click to expand...
Click to collapse
are you talking of the htc-logo or splash screen?
both would mae me happy
the splash is the most annoying
i use the attached (changed 2 jpg for size) file
as the welcome96.png
can it work on prophet?
Orange?
/Cacti
Re: Orange?
le_cactus said:
/Cacti
Click to expand...
Click to collapse
thank you for uploading orange dump CACTI,i have converted and posted in the first post, also there is a DOPOD splash uploaded.
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
100Tbps said:
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/viewtopic.php?t=52564
Be careful, read everything. If you're not careful you can brick your phone easy.
kyphur said:
100Tbps said:
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/viewtopic.php?t=52564
Be careful, read everything. If you're not careful you can brick your phone easy.
Click to expand...
Click to collapse
kyphur is correct 1 wrong move and you have a dead device. the reason that it is difficult to do a tutorial on how to cook roms is because you need to mess with several tool/programs/encode/decode/convert flash,etc,etc.etc...there is not a simple straightforward way of doing it, my Wizard is only 2 months old and have learn to cook roms unlock simply by reading the xda,also a lot has been guess work and brain power because no one is prepared to help you kill you device .at the moment I m very busy but I plan to write a tutorial in how to cook your extended rom.
in another note there is 2 new splashes uploaded
i have a 8125 that i was using with cingular / att
the other day i was doing a HARD RESET .. and thanx to my stupidity i did it as the battery was just about to DIE ..
it did .. right in the middle of the HARD RESET
i plugged the phone back in and then turned on the phone
the " splash screen " comes up ..
the numbers
it says
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.11
appear on the top left of the screen .. and that is where it stops .. it will not BOOT any further .. .. nothing works .. the only way to get the screen to shut off is to take the battery out and start the process again
I feel i have damaged the O.S system or something
can anyone give me a place to start .. or a way to begin to even attempt to fix this problem ..
thank you so much in advance to anyone who can shed some light on this problem ..
start with the Wizard Wiki and get an original ROM (form the provider) to restore phone to good condition
i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice
Sanboy said:
i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice
Click to expand...
Click to collapse
My first advise was to read the Wiki. There you'll find a LOT of information and help on how to get it done.
You must find the same ROM that came originally with your phone. Go read and search...
ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all
Yes go to cingulars website and download the 2.25 rom release. This will allow you to flash your phone back to oem condition. Try hard resetting it again, I don't remember if you can do it from the boot loader screen but you may be able to.
Best of luck.
Jeff
Sorry, but Cingular site not exist, today is AT&T, or not?
Sanboy said:
ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all
Click to expand...
Click to collapse
What you want is to be spoon fed and that's why is so hard to find anything in this forum: because of the huge amount of repeated posts with same questions.
I made a Google search and in less than 3 minutes and 3 sites i found the original HTC/AT&T ROM link...
http://www.america.htc.com/support/8125/software-downloads.html
geez...
EDIT:
Double posting isn't a good policy either
Hey guys.
i just wanner say first im a noob at phones so dont flame me.
Right, i got a brand new t-mobile compact 2 (htc charmer) with t-mobile rom on it. i really wanner upgrade to Windows mobile 6 so badly but i cannot flash my rom cus it aint unlocked.
So i tried doing it myself with the unlocker this website suggests, but that always fails .
What i think happend is this mda has been updated to the latest t-mobile rom. Which is:3.8.2.21 WWE and the unlocker is only for the old versions.
I actually dont know im right at all. but if anyone can get back to me either by pm, email or If you know your stuff please dont hesitate to add me on msn, and talk me though it. trust me its alot easier to do that then wait for thousens of emails.
Anyway any help will be amazing. remeber im a noob so please dont flame me, i just want to be able to experince the mobile 6 that all you guys are.
Email/MSN: [email protected]
Thankyou so much everyone. I hope you can solve this problem.
Oliver Pole
You don't have to unlock your phone to flash WM6. Considering you've already flashed the latest t-mob rom, just go to TouchFLO ver. 2.1 thread in Charmer Mobile 6, download the rom, read the instructions and flash. It will work.
Good luck.
Okiess gonner try it now. hopefully it will, will get back to you soon.
Ill describe the entire process.
Nope still not working, wont flash.
I run the flasher bat file the screen stays completely still nothing happens and i donno why. is it cus its not cid unlocked. i know you said it dont, but one of the guys said it did.
Get back to me soon
poleanator said:
Nope still not working, wont flash.
I run the flasher bat file the screen stays completely still nothing happens and i donno why. is it cus its not cid unlocked. i know you said it dont, but one of the guys said it did.
Get back to me soon
Click to expand...
Click to collapse
my charmer wasnt cid unlocked too, but i could install [vlodeck TouchFLO WM6 ver. 2.1]
it can be, that you have to install t-mobile AKU 3.3 from handy-faq.de
Hi,
I have an att tilt (8925). The other day I happend to upgrade the ROM or flash from 6.0 to 6.1 from htc official site there after the phone doesn't get the signal(wireless).
The following is the device information.
ROM Version:3.57.502.2 WWE
ROM Date:07/17/08
Radio Version:1.65.21.18
Protocol Version:25.88.40.05H
Please any kind of help would be really greatly appreciated....
Thanks in advance.
And you used the ATT rom?
Thanks for the reply but I am sorry I am totally new to all this wat do u wat me to do....
yeah looks like you did.
Could you give us more data ?
Where did you find your phone ? Was it unlocked ? Did you do hard-SPL in it ?
What is the OS version, exactly ?
Maybe you must change the Radio, maybe you must flash with another ROM version.
Maybe you only must enable the phone...
Please enter the boot screen and write here all your data numbers (then, switch off the device, you'll boot normally again), and also write all the data you can find in Start-Settings-System-"Device data" (or similar the last screen)
(don't write here the IMEI as it's not needed and could be used for third party people to lock your phone) !!!!!!!!
With all the data we'll know what exactly is your device and what exactly may be happeing to it.
Hi,
I got the phone from ATT with windows mobile 6.1 Professional.
R 1.65.21.18
G 25.88.40.05h
D 3.57.00.00
These are the things that I got when I tried to reboot the phone
ROM Version:3.57.502.2 WWE
ROM Date:07/17/08
Radio Version:1.65.21.18
Protocol Version:25.88.40.05H
and this is the data from the device
Please help me,Any replies would be greatly appreciated.
thanks in advance.
Which is it?
srinivasmuthyala38 said:
I got the phone from ATT with windows mobile 6.1 Professional.
Click to expand...
Click to collapse
However earlier (in the first post)
srinivasmuthyala38 said:
The other day I happend to upgrade the ROM or flash from 6.0 to 6.1
Click to expand...
Click to collapse
I'm
What actually happened and why the difference? Surely if you have an AT&T phone and put an AT&T ROM on it (with no other modifications) as per how AT&T intended, if that causes it to fail, AT&Ts warranty department should be informed and should come to the rescue? If you've already hard reset the phone and tested again (it's important to hard reset after a ROM flash) and have tried reflashing the new ROM again and hard resetting afterwards with the same results, it's time to contact them?
Flying Kiwi said:
However earlier (in the first post)
I'm
What actually happened and why the difference? Surely if you have an AT&T phone and put an AT&T ROM on it (with no other modifications) as per how AT&T intended, if that causes it to fail, AT&Ts warranty department should be informed and should come to the rescue? If you've already hard reset the phone and tested again (it's important to hard reset after a ROM flash) and have tried reflashing the new ROM again and hard resetting afterwards with the same results, it's time to contact them?
Click to expand...
Click to collapse
omg I should just shoot myself for saying this, BUT, yes this is very good advice.
Hi,
Thanks for the reply, I have tried wat u said but no result and unfortunately I am out of warranty I called HTC for a repair they it would cost $35 for diagnosis and minimum amount for the repair is $145 can u please suggest me any alternative for this.......
srinivasmuthyala38 said:
can u please suggest me any alternative for this.......
Click to expand...
Click to collapse
wat is the answer to my earlier question? You need to tell us wats really going on if we are to be any assistance.
Hi Flying Kiwi,
I have flashed the rom thats given by att and then hard reset aswell but that dint work out still no network.please let me know if I answered what you were asking.
Thanks
srinivasmuthyala38 said:
I have flashed the rom thats given by att and then hard reset aswell but that dint work out still no network.please let me know if I answered what you were asking.
Click to expand...
Click to collapse
Did you try this process twice (in case of a bad flash)? How do you explain the different Windows Mobile versions you referred to as being on the phone originally? How old is the phone?
Hi,
I tried that not twice but many times....I told you that I originally had win 6.0 then I updated to 6.1 given at htc.com its just out of warranty by a month, its like 13 months old.....
srinivasmuthyala38 said:
I told you that I originally had win 6.0 then I updated to 6.1 given at htc.com its just out of warranty by a month, its like 13 months old.....
Click to expand...
Click to collapse
The reason for my question was because in your 3rd post you said the device came with WM 6.1 from AT&T.... My HTC branded TyTN II had a warranty for 15 months from new and even if yours is just out of the warranty period for Tilts, they shouldn't completely ignore you if you can prove the problem was caused by using their ROM upgrade. That said, given no-one else with this phone and ROM has complained about the same issue as you here, either your local celltower has coincidentally failed at the same time as you carried out the flash or some damage has occurred to your device (such as to the aerial sticker perhaps). The simple way to find out would be to test it out in other areas where you know reception to be good, also to revert its ROM/Radio and SPL back to the original Tilt setup. You can find all the required files and instructions here at xda-dev via the wiki about how to do that.
As Flying Kiwi says, you can revert to 6.0...
I'm also intrigated by this change of versions from 6.0 to 6.1 (not WM versions but your posting versions)
Well, le'ts imagine you flashed the correct 6.1 ROM to the correct device (the data you wrote here allow us believe in this, I think, but I'm not an expert in SPL and radio versions). It should work. If not, you may try to download the old SPL and 6.0 ROM and flash them. (You'll find their links somewhere in the Wiki, here). Maybe you need to change the Radio to get the phone working ? Did you use the correct ROM for your S/N device ?
On the other side, you may try to do the entire Hard-SPL process and then flash one of this wonderfuls ROM's you may find here.
Or reverting to the original 6.0 and SPL "from" a cooked ROM ?
I'm thinking about my most terrible enemy, the electricity down, and thought you might download a bad version, or it got corrupted but you could flash it...
Please, don't follow my instructions till one of the masters will read my post and tell if I'm (or not) mistaken.
Hi All,
I thank you frm the bottom of my heart for all your responses, surprisingly when I when to att device support center today they said that my phone is still under warranty and they replaced my phone with a new one....
Thanks,
Srinivas
srinivasmuthyala38 said:
I when to att device support center today they said that my phone is still under warranty and they replaced my phone with a new one....
Click to expand...
Click to collapse
Glad you now have it sorted