Related
MS voice command not work on my HTC diamond, would you please help me, any body test any version on it?
I can't get MC1.6 to work on my Asian Rom 1.37 diamond. It gives an error after install...everything seems ok but when I go into settings, it hangs and I have to do a Hard reset
v1.6 UK made my phone lock up whenever I tied to access settings or programs. I had to hard reset the phone
yeah dont seam to work, you can use ciberon voice commander tho, works well.
you can download it from the TLR 3 ROM thread (in the rom development section)
Hi folks,
VC 1.6 definitively works on Diamond. I'm using it since I get mine last week.
JanDaMan said:
yeah dont seam to work, you can use ciberon voice commander tho, works well.
you can download it from the TLR 3 ROM thread (in the rom development section)
Click to expand...
Click to collapse
Does this require any training or anything? Didn't need to download it as it came on my ROM with the phone. I've tried to use it 3 times now and each time its failed to hear anything I say. I used to use MS VC all the time with very little problem.
funnysurf said:
Hi folks,
VC 1.6 definitively works on Diamond. I'm using it since I get mine last week.
Click to expand...
Click to collapse
Yep, it definately works. You just have to be clever enough to manually upgrade it to version 1.6.19209 otherwise it'll keep hanging your Diamond
Not sure what UK version im running, but the install crashed. I restarted the phone, and now it works great with my Parrot Bluetooth carket.
alanplum said:
Yep, it definately works. You just have to be clever enough to manually upgrade it to version 1.6.19209 otherwise it'll keep hanging your Diamond
Click to expand...
Click to collapse
I guess I am not clever enough. How did you do that?
alanplum said:
Yep, it definately works. You just have to be clever enough to manually upgrade it to version 1.6.19209 otherwise it'll keep hanging your Diamond
Click to expand...
Click to collapse
Thats a US release isn't it?
Does it work properly with our "posher" (or even proper!) English accents
Cyberon Voice Commander
Monty Burns said:
Does this require any training or anything? Didn't need to download it as it came on my ROM with the phone. I've tried to use it 3 times now and each time its failed to hear anything I say. I used to use MS VC all the time with very little problem.
Click to expand...
Click to collapse
Yeah it works without any training, and works a treat for me, you have to follow the correct command tho (displayed when you open the app, eg say start <application name>)
Note: there is a program called 'Cyberon Voice Speed Dial' and that is NOT the same and does require training
PaulusUK said:
Thats a US release isn't it?
Does it work properly with our "posher" (or even proper!) English accents
Click to expand...
Click to collapse
Yes, it is the US release, but I'm Scottish so I'm not really bothered.
Never had a copy of the UK version but it involves manually copying these files from version 19209:
sapi.dll
sapiwavstr.dll
spcacheaudio.dll
vcbthag.dll
VCOSShim_PPC05.dll
coicecmd.exe
VoiceCommand_PPC.cpl
VoiceCommandWMP.dll
Phew...
Fairly easy to do. Install version 1.6.17913 then remove the shortcut in the Windows\Startup Folder. Soft reset so VC does not start. Copy all the above to Program Files\Voice Command with the exception of the CPL which goes in Windows. Put shortcut back into Startup, soft reset and away you go.
or go into my thread to see how I did it with the german version:
Here
Regards
Tom
tommatt said:
or go into my thread to see how I did it with the german version:
Here
Regards
Tom
Click to expand...
Click to collapse
Hi Tom, Thanks for the tutorial. I did in fact read that post before. However, was you issue with MVC not working because it cause your Diamond to hang completely forcing a hard reset when you go into Settings?
I can install with the error like everyone here. However, it hangs and has to be hard reset when I go into settings.....with my previous Touch, I got the error too when installing the same file but it worked. It did take some registry changes to make it work with bluetooth.
Anyone got an app that works like Shaznam/MusicID for HTC Diamond? The MusicID app doesnt run properly due to the VGA screen - plus its for smartphones, so doesnt support the touch screen.
The iPhone has a real nice Shaznam app to identify songs and I would love to see this for the diamond. Anyone have a solution?
bump!! Bump bump!!!
I've installed the smartphone version of this and yeah like u say it doesn't work 100% but if you run it and you see SONG ID image you can then press the LEFT button it'll start listening to the track and ID it if possible.
Its not idle and like you I'd like a proper version of this for the diamond too but just thought i'd put my 2p in.
lopuk said:
I've installed the smartphone version of this and yeah like u say it doesn't work 100% but if you run it and you see SONG ID image you can then press the LEFT button it'll start listening to the track and ID it if possible.
Its not idle and like you I'd like a proper version of this for the diamond too but just thought i'd put my 2p in.
Click to expand...
Click to collapse
Im bumping again - perhaps someone could develop something that supports the Diamond's VGA screen. Sadly this seems to be a case of iPhone getting better support than Windows Mobile.. again.
it's right. the iHypePhone always have better support...
anyway, i wrote a letter to shazam and asked them if they are planning to make a vga app or release a new music id and the answer was that nothing is in plan with winmo at the moment. duh
mreaglejr said:
it's right. the iHypePhone always have better support...
anyway, i wrote a letter to shazam and asked them if they are planning to make a vga app or release a new music id and the answer was that nothing is in plan with winmo at the moment. duh
Click to expand...
Click to collapse
Get used to this. iPhone has really stolen windows mobile's thunder. The once thing we WM users had over the original iphone was 3rd party software support... now hardly anything new is being developed commercially for WM.
Shazam MusicID for Diamond
Found it!
I don't now if you just got it, but i've found the link to the rapidshare .cab for the VGA working version of Shazam MusicID .
Here it is:
http://rs239.rapidshare.com/files/154862245/MusicID_signed.CAB
Enjoy
Thanks to HDblogmobile.it
Thanks! Works great!
Work really great!
And far more convinient than the previous one I had on my tytn II
Thank you
EDIT: Sadly it is a trial only :/
I am having expiration issue
On my Nokia N95 Shazam also says, it's a Trial, but it works and works and works
Now I've installed the CAB from rupertone, but i can't find any Icon on my D
BitisGabunica said:
On my Nokia N95 Shazam also says, it's a Trial, but it works and works and works
Now I've installed the CAB from rupertone, but i can't find any Icon on my D
Click to expand...
Click to collapse
It is under "at&t music". I tested and the software does lock itself after the trial expired.
It can be simply unlocked by removing a bunch of registry entries in somewhere near HKLM\Software\MusicID.
It should be really simple to write a little app that whipe this out of the registry and then launch the application; but I do not have Visual Studio setuped right now and furthermore, I have no experience in mobile dev.
fun_key said:
It can be simply unlocked by removing a bunch of registry entries in somewhere near HKLM\Software\MusicID.
Click to expand...
Click to collapse
Could you be more precise about what we have to removed ? Thanks
gorrunwe said:
Could you be more precise about what we have to removed ? Thanks
Click to expand...
Click to collapse
The entire key HKLM\Software\MusicID
This key does not exist until you ID a song, and it contains expiration informations. There may also be a way to fool expiration by replacing the values.
If one could write a very simple app that clear this reg key & then start the musicid app it would be great. It may even not be illegal because the binary will remain untouched. I would be pleased to pack everything in a shiny little cab!
Hmm 'Sorry, ID not found. Try Again!' I can't identify any song
Guys
Juste take a looh there
http://forum.xda-developers.com/showthread.php?t=423342
I did it!
I managed to have it working by myself.
Here is the working cab, it should work out of the box. If you use this cab the shortcut will be created directly in the program folder instead of at&t and it will be uninstallable.
Enjoy!
EDIT: It will not expire anymore
yeah nice one mate works a treat
is this also a trial version?
mankoorb said:
is this also a trial version?
Click to expand...
Click to collapse
Not really, it will never expire
thanks good job
I'v been trying to install iGO 8 or iGO 2006 on my new HTC Touch Pro.
It seems to install just fine from the SD card, but when I try to start-up, nothing happens. The "loading" symbol appears for a few seconds, then ... nothing.
Can anyone pls help?
Thank you so much.
LE: I am using ROM version: 1.90.401.1 WWE
update to newer version (8.0.0.44366) or disable HTC home from Today
paulyluca said:
I'v been trying to install iGO 8 or iGO 2006 on my new HTC Touch Pro.
It seems to install just fine from the SD card, but when I try to start-up, nothing happens. The "loading" symbol appears for a few seconds, then ... nothing.
Can anyone pls help?
Thank you so much.
Click to expand...
Click to collapse
U are in the wrong section. This is Kaiser thread.
sorry about that. i am new here. maybe a mod can help me by moving it to the right place.
paulyluca said:
sorry about that. i am new here. maybe a mod can help me by moving it to the right place.
Click to expand...
Click to collapse
its all ok, just post your question in the touch pro section.
But I think its not necesary, u already have the answer.
Moved to Raphael, aka Touch Pro, Forum.
HTC Touch Pro do not seem to have HTC Home. In the "Today" settings, there is the HTC Touch Flo enabeled. I tried to runn iGO with it desabeled, but no succes.
So, I think there must be some other way...
Install iGo8, then search for the latest update. Install the latest update, remove the iGo8 Today plugin in Setting > Today > Items, and add a link in the "Programs" tab of TF3D. That should do it (works fine on my Touch Pro)
clandestino_usr said:
Install iGo8, then search for the latest update. Install the latest update, remove the iGo8 Today plugin in Setting > Today > Items, and add a link in the "Programs" tab of TF3D. That should do it (works fine on my Touch Pro)
Click to expand...
Click to collapse
Thank you so much!!!
Got it working now....
Just a quick question, does it work in landscape mode on the touch pro?
Uhm, I don't know why it isn't working for you because on my Touch Pro it works great. Just installed it, copied the appropriate files for my country (the Netherlands) into the appropriate dirs as mentioned in the readme and that's it. Uhm, no, I had to set the GPS on com4 in iGo8 to get the gps working but that was all I had to do.
paulyluca said:
I'v been trying to install iGO 8 or iGO 2006 on my new HTC Touch Pro.
It seems to install just fine from the SD card, but when I try to start-up, nothing happens. The "loading" symbol appears for a few seconds, then ... nothing.
Can anyone pls help?
Thank you so much.
LE: I am using ROM version: 1.90.401.1 WWE
Click to expand...
Click to collapse
l0st.prophet said:
Just a quick question, does it work in landscape mode on the touch pro?
Click to expand...
Click to collapse
Just tried it. Works great in landscape too.
Can you confirm that the maps render and scroll smoothly when navigating now unlike the jerky movement you have with the Kaiser?
I can't compare with the Kaiser, I never had one. But map scrolling seems ok to me.
Hmm I got the same problem.. How do you actually update it?
I just bought my htc pro touch so bear with me please.
i installed it. everything seemed fine, i click on it, i get a loading icon, nothing happens.
Keyboard?
Hi,
iGO8 seems to work, but I can't get the hw keyboard to function. Not one key seems to respond. Does everyone else have this problem?
Thanks,
Cheers,
Cacti
i dont understand why there are reported problems with the gps software on this phone. is there anything outhere that just works , without tweaks or anything of the sort?
is the co pilot 7 better than igo8? in terms of usability by someone who doesnt understand how all this works
I have tested iGO8, TomTom 7, and Garmin XT. All work fine on the Touch Pro (but I did not test hardware keyboard input).
In my case, I found Garmin to have the best GPS performance: only 2-3 seconds lag behind my separate Garmin nuvi 760 unit, and <30 secs for first fix most of the time. iGO and TT are a little slower but still work fine -- but other people find iGO or TT to work very well.
Other thoughts: TT has the most detailed roadmaps, iGO and Garmin are average. But I find Garmin has the best POI support. iGO (and I think TT, also) supports TMC but (so far) it cannot be activated on the Raphael. Garmin does not have TMC but can download traffic from its servers via your data connection (3G, EDGE, etc). For me, Garmin is a solid middle-of-the-road software; the only major drawback is no TTS, which iGO and TT both have.
I haven't tested Co-Pilot 7, but since it's based on iGO core (iirc) I probably won't try it. But of course, you should try demo maps or at least read reviews to find out which software is good for you.
stranger stel said:
i dont understand why there are reported problems with the gps software on this phone. is there anything outhere that just works , without tweaks or anything of the sort?
Click to expand...
Click to collapse
To help clarify, there are two separate issues. The first is that many GPS software comes on SD cards that are intended to be kept on the SD, or on CD to be installed to main device memory, though if you buy it you have every right to install it to your Raphael. Since the Raphael only has microSD, you may have to install the program in a certain way to get it running. You also have to be careful of the software version, since not all are compatible with WM6.1. (These issues come up all the time among people pirating the software.)
The other issue is about the GPS receiver in the Raphael. Lots of people are trying different tweaks to get the best performance (ie: no lag) out of their receiver. But it's unclear if it's a problem with a weak antenna, or if certain programs (iGO, Garmin, TomTom) run better/worse on the Raphael. The results have been somewhat mixed but we're gradually figuring everything out.
Hi, I am trying to install IGO 8 on the HTC touch Pro, Raphael. The installation seems ok but when I launch the program, nothing happens. The rainbow circle shows up but then nothing. I am wondering what I am doing wrong. Could someone please advise?
Thanks in advance.
aznfrenchboyca said:
Hi, I am trying to install IGO 8 on the HTC touch Pro, Raphael. The installation seems ok but when I launch the program, nothing happens. The rainbow circle shows up but then nothing. I am wondering what I am doing wrong. Could someone please advise?
Thanks in advance.
Click to expand...
Click to collapse
Just install a newer wersion: 8.0.0.44366 or 8.0.0.54000 and it will work just fine.
Hi,
I have just installed the latest skype on my kaiser and it is all working well, but can you not have video calls (through wifi) with the front camera i cant even see the other persons picture am i missing something or does it not support video?
Thanks
Jason
Correct, not supported.
Cheers
Does someone have an old .cab version of skype for my htc tytn II (2.2.0.38 or something like that I think)? Unfortunately I didn't keep the cab file...
The new version (2.5) is pretty much useless for me because it crashes instantly when making a phone call over wifi.
Thanks!
hi can you give me a skype download link?
www.skype.com ?
ye got 2 very old cabs here
SkypeForPocketPC.CAB
07/28/2008
and
SkypeForPocketPC_LowCPU.CAB
05/14/2006
I found a cab of the 2.2.0.18 version which works fine with my tytn. Thanks!
Inspector-Gadget said:
Does someone have an old .cab version of skype for my htc tytn II (2.2.0.38 or something like that I think)? Unfortunately I didn't keep the cab file...
The new version (2.5) is pretty much useless for me because it crashes instantly when making a phone call over wifi.
Thanks!
Click to expand...
Click to collapse
have you tried skype 3.0???? It works well with me without crashing, try it and maybe it would be better
www.skype.com would be good except that site is blocked here in UAE
anyone got a link or cab somewhere that works on tytn II (thats not on skype)
gazzacbr said:
www.skype.com would be good except that site is blocked here in UAE
anyone got a link or cab somewhere that works on tytn II (thats not on skype)
Click to expand...
Click to collapse
http://rapidshare.com/files/349576424/SkypeMobile.exe
But I'm not sure if it even works in UAE. Afaik they block the ports over there
This version of Footprint is based on.......HTC_Footprint_1.01822.3925 (This is the 2D Manilla version, but will work with TF3D)
I have done some modifications to make this work on my Fuze, but it should work just fine on the Touch Pro, or Diamond. Currently this version does NOT have the "Footprint Tab" on the home screen. I don't have lots of time on my hands so bear with me on updates. If anyone wishes to step in and modify it more, its all yours.
**THERE WILL BE NO FUTURE UPDATES**
KNOWN PROBLEMS
**LANDSCAPE VIEW DOESN'T FIT THE WHOLE SCREEN**
READ BELOW FIRST
**Footprint MUST be installed BEFORE installing Google Maps. If your device was PRELOADED with Google Maps you MUST re-install it.**~ If you use TomTom download the TomTom Supported Version ~
~ If you use CoPilot download the CoPilot Supported Version ~
~ If you use PaPaGo download the PaPaGo Supported Version ~
~ If you use NaviTel download the NaviTel Supported Version ~
~Having one of the above GPS programs is NOT required. But if you don't have one then you MUST download Google Maps to get the full effect.
**CHOOSE & DOWNLOAD FILE HERE**^^^^^UPDATE^^^^^FILES ARE NOW IN ONE SECTION^^^^^UPDATE^^^^^
The uncompressed files are the larger of the two also the compressed files are filed as "compressed". There is no difference between the two so choose the compressed file unless you have issues then revert to the uncompressed file.
Extra CAB's|Currently Incorporated
It's not working on my TP, something about a missing file or signature.
Thanks-
Thanks, will give this a try on my Sprint HTC Pro.
Will give you feedback
What is this?
touchflo2d or 3d? And happy drinking
hidavi said:
What is this?
Click to expand...
Click to collapse
I believe it's the new HTC Footprints app. It uses GEOTagging on your photos to help allow you to track when and where they were taken easier.
For the record.
Working on:
Stock ROM on a AT&T Fuze does work.
Conflippers ROM on a Alltel Touch Pro does work.
GC's 2.1.4 ROM on a Sprint Touch Pro does work.
Merdinh 3.2 ROM on a Sprint Touch Pro does work.
PROven 1.4a ROM on a AT&T Fuze does work.
Stock ROM on a Sprint Touch Pro does work.
Not Working on:
Custom ROM on a GSM Diamond does not work. <Xboxmod tried 4 different ROM's>
Lantis OS 3.01 ROM on a Touch Pro does not work.
As I get more information, I'll update.
DonDie said:
It's not working on my TP, something about a missing file or signature.
Click to expand...
Click to collapse
The exact error would be more helpful.
guevr001 said:
touchflo2d or 3d? And happy drinking
Click to expand...
Click to collapse
Sorry, forgot to clarify that. It's 2D.
???
KDKobes said:
The exact error would be more helpful.
Sorry, forgot to clarify that. It's 2D.
Click to expand...
Click to collapse
So if we have TouchFlo3D installed, then we shouldn't try it? I was thinking its a standalone Install?
I could be wrong, but I don't think there is even an actual TF3d version of "Footprint" and is only in 2D.
This cab will work on TF3D or 2D. It does NOT include the "Footprint" Tab on the Home screen though, so NO its NOT a full Manilla install. This is simply a standalone cab. Shortly you will see it built into some ROM's.
Tried it
Ok I tried it, and it did work, but as you had mentioned, the above errors or glitch are still present. Its a nice job tho, and I appreciate your effort. Can't wait for a complete working build
hi
won't work for me on 2 different rom (i have a gsm diamond)
it say trusted certificate!!!
do you have an idea why?
i've just install your cab no m2d or something related.
i try sdkcert but always the same bug!
xboxmod said:
hi
won't work for me on 2 different rom (i have a gsm diamond)
it say trusted certificate!!!
do you have an idea why?
i've just install your cab no m2d or something related.
Click to expand...
Click to collapse
You probably need to install the sdkcerts.cab
I am assuming the error is something along the lines of "program cannot be installed because its not digitally signed by a trusted certificate"
I will attach a cab in the SECOND POST.
Works Great
I just tried the second version and it works fine with my TomTom 7. But I want to know something, must it always try to plan the route? I had the impression it would just locate the place on a map and that's it. Any chance of an implementation with Google Maps ? I don't want to ask much.
But the other 2 problems are still there. The picture taken is out of place. But GPS works Great
Great work Men Kudos
Hey KDKobes
I made the Navi Panel for VGA Devices found here.
It works great with your footprints file you made here.
NAVIPANEL can be found here: http://forum.xda-developers.com/showthread.php?t=478478
herg62123 said:
Hey KDKobes
I made the Navi Panel for VGA Devices found here.
It works great with your footprints file you made here.
NAVIPANEL can be found here: http://forum.xda-developers.com/showthread.php?t=478478
Click to expand...
Click to collapse
Thanks, great work! I got the TV out cable for my deck in my car and that is really handy.
Damionix said:
I just tried the second version and it works fine with my TomTom 7. But I want to know something, must it always try to plan the route? I had the impression it would just locate the place on a map and that's it. Any chance of an implementation with Google Maps ? I don't want to ask much.
But the other 2 problems are still there. The picture taken is out of place. But GPS works Great
Great work Men Kudos
Click to expand...
Click to collapse
Yes, I am working on getting the google maps implemented into the program. I am hoping to have the other 2 problems fixed soon. I might get the google maps in the next update, but no guarantee.
KDKobes said:
Yes, I am working on getting the google maps implemented into the program. I am hoping to have the other 2 problems fixed soon. I might get the google maps in the next update, but no guarantee.
Click to expand...
Click to collapse
if you use street view google maps than no work needed. i just used it and it works perfectly.
here is street view maps by google.
what are you editing.
the reason i ask is i want to help out
also with v2 foot prints i am not able to edit a saved footprint tag info
Finally got a chance to install and try but can't get past the error,
"The file 'HTCFootprint.exe' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
I also have installed the SDKcerts.cab but don't see them listed in the licensing section on the phone.
smotrs said:
Finally got a chance to install and try but can't get past the error,
"The file 'HTCFootprint.exe' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
I also have installed the SDKcerts.cab but don't see them listed in the licensing section on the phone.
Click to expand...
Click to collapse
smotrs
remeber cdma vs gsm
i think cdma needs something else for this to work.
kinda like s2a