Database Develop

"Mr. Clean" AKU 2.3 ROM available - No Carrier Cus

After seeing more than a few requests on the board, I figured it was high time to cook up a clean ROM for everyone to use. The purpose in creating it was two-fold. One, I wanted to have a core ROM that wasn't littered with carrier customizations and two I wanted to create a solid base for others to play with.
Cooking up your own ROM can be scary the first time you do it, it's a lot safer to simply mess with tweaking the Extended ROM and leaving the OS and bootloader alone. The Mr. Clean ROM only loads four items (Disable Cert, MMS Folder Creation, MIDlet Java Session Fix and Total Commander) so it's great to use as a base to build on or simply to flash over completely.
As for the ROM itself, I used the core OS from the latest T-Mobile beta ROM (AKU 2.3) and the Radio ROM from the latest Cingular beta ROM (2.25). As many have already noticed, though the two carrier releases share the same version number for their respective Radio ROMs, they are not idential files. The Cingular Radio ROM appears to much better at keeping a signal.
--------------------------
Exact version numbers are as follows:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS: 2.24.10.1
Within the OS, Device Information reports:
ROM version: 2.24.10.1 WWE
ROM date: 4/17/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM version: 2.24a Mr. Clean
And the OS build is reported as:
OS 5.1.195 (Build 14955.2.3.0)
--------------------------
I've been testing it out for a few hours now and the build seems to be solid. Boot time is very quick and it appears to acquire a network signal almost immediately.
A2DP is supported natively in the ROM.
Any questions, please post here in the thread. Otherwise I hope this helps all the non-Cingular/T-Mobile users as well as the budding ROM chefs out there!
The ROM is currently on the FTP at:
ftp://xda:[email protected]/Wizard/Roms/MrClean_RUU_WIZARD_224a_AKU23_WWE.zip
Note: 2.24a was uploaded on 6/17/2006 and contains the Java Session fix. Please DISREGARD v2.24 and don't bother using it. If an FTP admin is reading this, please feel free to DELETE MrClean_RUU_WIZARD_224_AKU23_WWE.zip from the safe area. This file supersedes it.
Edit: 4/7/06 v2.24 deleted from safe area (eDsuB)

sweet... This is exactly what I need... Please do keep this going for future ROM releases.
Which Splash screen did you use? I tried to put in my own with an exe I found in another thread, but it doesn't work on this ROM.

ikkoku said:
sweet... This is exactly what I need... Please do keep this going for future ROM releases.
Which Splash screen did you use? I tried to put in my own with an exe I found in another thread, but it doesn't work on this ROM.
Click to expand...
Click to collapse
perhaps this can help;
http://forum.xda-developers.com/viewtopic.php?p=301221#301221

aalright now after i install this rom where can i get the proper t-mobile settings? ive looked around and ive seen it once but now i cant find it

ahhh. man. i just upgraded to the tmobile 2.24 last nite becaue i couldnt wait anymore, and now you have this. lol. i would rather a core rom though so i still mite get this

i just install this rom and installed all the cabs of the t-mobile ext rom and well theres one thing the comm manager isnt the same.
it has the same settings int he settings menu like the usb to pc thing just the comm manager is different is there any way to change the comm manager to the new layout.

This is great, thanks.
So what exactly do you do for the MMS folder creation? When I have updated in the past and not run the extended ROM stuff, I didn't have an MMS account. So I had to make a registry change to enable MMS account creation, then create it in the messaging application. Is that basically what you do?

ikkoku - Glad you like it. I'll try to keep it going as new ROM releases ship out. To answer your question about the splash, it's a custom screen.
jacob-mda - Check out the thread listing the functions of the T-Mobile 2.24 Extended ROM. I've listed out the known components in there. If you just want the GPRS/WAP and MMS settings you should be good to go if you grab the following CABs from the T-Mobile ExtROM and install them:
MP_Customization_TMOUSA_Wizard(AKU2.x)_060510.CAB
P_Generic_Conn_Settings.CAB
gizm0luvsu - I'm not sure what you mean when you say the Comm Manager isn't the same. If you're talking about the difference between the old 1.x ROMs and the new, you'll note that the Comm Manager now has seven items in it instead of four. It's going to look a bit different just because of the new functions.

jacob-mda said:
aalright now after i install this rom where can i get the proper t-mobile settings? ive looked around and ive seen it once but now i cant find it
Click to expand...
Click to collapse
Here, this will only install the T-Mobile GPRS/MMS/IE/OTA settings. (this was made by xelencin on a previous ROM)

Chriš said:
This is great, thanks.
So what exactly do you do for the MMS folder creation? When I have updated in the past and not run the extended ROM stuff, I didn't have an MMS account. So I had to make a registry change to enable MMS account creation, then create it in the messaging application. Is that basically what you do?
Click to expand...
Click to collapse
Basically. When trying to figure out how to do it, I was pointed to one of the default carrier CABs that does just that -- creates the MMS folder and adds the Java link. So I just used that CAB to do the work.

what i mean is that i know its supposed to look different. when i was using 2.21 it had 5-6 things in it now when i upgraded to this mrclean one it only has the original 4.
but it has the usb-> pc sync and stuff that the new one has

Prophet
does such a rom also excist for the htc prophet??
in my case the orange spv m600 with latest dopod rom.
or is this rom already good to go for prophet users???
could al the people who reply to this post mention on what device the installed it on.
so everybody knows whats going on here.
I know this is the forum for the wizard but allot of programs and upgrade for the wizard are usable on the prophet.
can you tell me if this is possible or not?
thanx

gizm0luvsu said:
what i mean is that i know its supposed to look different. when i was using 2.21 it had 5-6 things in it now when i upgraded to this mrclean one it only has the original 4.
but it has the usb-> pc sync and stuff that the new one has
Click to expand...
Click to collapse
The Comm Manager in the MrClean ROM has seven options in it. Just like the other AKU 2.3 ROMs. If you've only got four options in the Comm Manager you don't have the ROM properly flashed.
I would double check to make sure that the version numbers match what I have posted above. Also, make sure your device is CID-unlocked before trying to flash this ROM.

i actually reflashed my rom and now it does have the 7 thx for the info

Re: Prophet
rebelish said:
I know this is the forum for the wizard but allot of programs and upgrade for the wizard are usable on the prophet.
can you tell me if this is possible or not?
thanx
Click to expand...
Click to collapse
I would NOT try to flash this ROM to anything but a Wizard device. I honestly wouldn't know if similar ROMs exist for other devices. Since I only have a Wizard, I can only test things on a Wizard so anything I build is going to be solely for the Wizard (at least until I get my grubby hands on more toys).

Re: Prophet
gamescan said:
rebelish said:
I know this is the forum for the wizard but allot of programs and upgrade for the wizard are usable on the prophet.
can you tell me if this is possible or not?
thanx
Click to expand...
Click to collapse
I would NOT try to flash this ROM to anything but a Wizard device. I honestly wouldn't know if similar ROMs exist for other devices. Since I only have a Wizard, I can only test things on a Wizard so anything I build is going to be solely for the Wizard (at least until I get my grubby hands on more toys).
Click to expand...
Click to collapse
Ok thanx for that info well at least its out end on the forum i'm quite sure somebody is gonna take a look at youre rom and figure out how to use this on the prophet after all xda-developers.
nice fast reply appriciate that i might have tryed it out if youre reply would take a little bit longer cheers.

Registry Tweaks
Attached is a cab file containing a bunch of common registry tweaks that may not be enabled after installing this clean ROM.
Here are the settings the cab file contains:
; Menu Animations - 6 is ON, 0 is OFF
[HKEY_LOCAL_MACHINE\System\GWE\Menu]
"AniType"=dword:00000006
; Enable unsigned cab install
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:00000001
; Disable GPRS disconnect button
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Flags2"=dword:00000000
; IE Cache to storage card
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders]
"Cache"="\\Storage Card\\Temporary Internet Files"
; Enable EDGE Icon
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"EnableDifferGprsEdgeIcon"=dword:00000001
; Enable Keyboard indicator
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"EnableIndicator"=dword:00000001
; Enable 4-way scrolling
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Navigation]
"4-Way Nav"=dword:00000000
; Enable G wireless
[HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS]
"dot11SupportedRateMaskG"=dword:00000008
;Enable Cleartype in landscape mode (1=OFF 0=ON)
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"offOnRotation"="0"
; Disable Message Sent notification
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings]
"SMSNoSentMsg"=dword:00000001
; Configure Pocket Internet Explorer to browse WAP pages:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings]
"Accept Header"="application/xhtml+xml, */*"
; Enable Network Time Update page
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting]
"ShowTimeZonesPage"=dword:00000001
; Enable receiving of files over Bluetooth/IrDA
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:00000001

great rom. thank you. nice funny splash screen. why don't make theme too?

ok sorry for the newb question..
but..
being with cingular - 8125 what will i loose with this ROM (apps / setting? ) .. will i just have to re configure my ie settings to cingular..
again sorry for the new question all this rom stuff is still new to me .. I am running the latest summter rom and have had success with it but i think there are some radio issues...

Radio ROM
Hi gamescan
Could you upload also just the 8125 Radio ROM ?
Thx in advance and cheers
hrb

HTC MTeoR WM 6.1 A4 ENG (Beta 1 - B1)

Hello all
Wm6.1 alpha 1 Ver.5.2.1711 (Build 19202.1.0.0)
Many bugs (high instability)
WM6.1 alpha 2 Ver.5.2.1711 (Build 19202.1.0.0)
Many Bugfixes (Usable)
Accesibility-working
Comm manager-working
T9-working
Power-NOT WORKING (you have to regedit)
WM6.1 alpha 3 Ver.5.2.1711 (Build 19202.1.0.0)
Many Bugfixes (Very Usable)
Accesibility-working
Comm manager-working (without bluetooth) - fix in progress (A4)
Bluetooth working - separate menu
ad2p fixed - proper version
T9-working
Power-working
Suspend -working
XIP - Rebuilded
Caller ID -working
HSPDA-working
GPRS-working
GPS-working (external device)
MMS - working
2 beam in control pannel !!!! - fix in progress (A4)
Please test and tell me if is anything wrong and if you find fixes
WM6.1 Beta 1 Ver.5.2.1711 (Build 19202.1.0.0)
Many Bugfixes
Accesibility-working
Comm manager-working (COLOR with BLUETOOTH)
Bluetooth working - separate menu
ad2p fixed - proper version
About - FIXED
T9 - working
Power - FIXED
Suspend - working
XIP - Rebuilded
Caller ID - working
HSPDA - working
GPRS - working
GPS - working (external device)
MMS - working
2 beam - FIXED
Windows Live - FIXED
you must update Windows Live to latest version
http://rapidshare.com/files/106073863/Windows_Live_10.6.34.2500.cab.html
ROM Links
http://rapidshare.com/files/105874292/MTeoR_-_WM6.1_-_A3.rar.html
http://rapidshare.com/files/106079473/MTeoR_-_WM6.1_-_B1_-_ok.rar.html
Please test and tell me if is anything wrong and if you find fixes
Also released the A4 kitchen
Many thanks to
Bepe - Tools
Mamaich - Tools
Dr Martin Gonzo - support
Garmin - support
futureshock - Test and bugreport

Hi, from where comes the Wm6.1 Roms?!
when you give it me i will try to made other languages too of it

jerpelea said:
Hello all
This is the alpha version of wm6.1
Please test and tell me if is anything wrong and if you find fixes
http://rapidshare.de/files/39013516/MTeoR_-_Splash_Screen.rar.html
http://rapidshare.com/files/98157272/WM6.1_Segoe.cab
http://rapidshare.com/files/104652554/MTeoR_-_WM6.1_-_A1_-_ok.rar.html
tomorow i will release the rom kitchen
and vanilla wm6 & wm6.1 roms
Many thanks to
Bepe
Mamaich
Dr Martin Gonzo
Garmin
for their tools and suport
Click to expand...
Click to collapse
how cook chines ROM?

good job! thanks very much!

Wow Cooooool man good job thanks

hello,jerpelea !
I find this rom in "seting", "Power Management","Accessibility" is bad."regional settings" locale is russian,and lose "systerminfo"
my english is poor,wish you can understand.

Hello lyf1998
fixed accesibility
working on power settings
i know that locale is in rus (is normal)
Where did you find sistem information ?(it is not included in this rom)
I will not cook chinese rom
please learn english, read forum and learn gow to cook or add locales.
I will release the Kitchen so that you could cook yorself an rom
Thanks

jerpelea said:
I will release the Kitchen so that you could cook yorself an rom......
Click to expand...
Click to collapse
Thanks.
呵呵，谢谢。

released
till monday i will release an A3 version

jerpelea is KING!
Hey jerpelea. Thanks so much for getting this out, I loaded it up as soon as I got home Friday night. Observations so far:-
Pros:-
-Very fast loading, much faster than latest WM6.0 out for Mteor
-Very fast running, including loading apps.
-Visually, complete makeover. Much happier with this Today screen than any plugin I've seen.
-All software attempted to far works fine- Route66, Google Maps, Skype (as well as it does on the mteor anyway!).
Issues:-
-msn messenger not installed, however Today screen expects that it is there. When selecting to sign in from Today screen, it comes up with a connectivity issue immediately, however no connectivity issue exists. I can install WLM seperately, but would be ideal to have the sign in from the Today screen as intended. Also when I've installed the latest WLM, there is a strange issue where I cannot do backspace- the 'back' key does not delete text and move the cursor backwards. Makes MSN virtually unuseable for me.
-Phone intermittently does not resume from standby- is frozen. It is still flashing to say that it's on and connected, however no buttons will revive it- the only way to revive is to remove battery and reboot. When phone restarts new messages and emails come in- leads me to believe phone was frozen.
-Phone intermittently wakes up for no reason- have had the phone sitting next to me for a night, and it lights up brightly at random intervals.
I am blown away with this release- it's made my Dopod 595 my favourite phone to carry again, over my Hermes and Asus Halley. A few issues to be resolved obviously, but it's exciting that we're getting such recent builds of WM6 for our Mteor's.
Keep up the great work, holding my breath for the A3 release!!!

does it work with dopod 595 variants with forward facing camera? and also, can you please point us to SuperCID unlock guide? thanks

Dopod 595 & WM6.1 A2
alexnvidia said:
does it work with dopod 595 variants with forward facing camera? and also, can you please point us to SuperCID unlock guide? thanks
Click to expand...
Click to collapse
It sure does work with the 595, albeit with the issues mentioned in my previous post. I'm honestly not sure about the front-facing camera, hadn't tried it yet. Will try tonight and advise.
In terms of getting around the CID issues, there will be 3 registry edits you will need to make (need to copy regedit to phone and run to make changes), and also a piece of software to application unlock. This will make your phone Application Unlocked.
You then put Des' SSPL on the phone, run it and immediately press the power and camera buttons. It will then start with the special SSPL, which gets you around the CID locking. You can in theory update via the update software (RUU) after this, however I have always upgraded via putting the rom onto the memory card as "BREEIMG.NBH". There is packaging software that will allow you to put your own choice of radio, rom, splash-screen's etc together.
In terms of the SSPL process, this is very well documented on the forum. Just take a look. I would not attempt the SuperCID process suggested- which involves loading the Hermes unlock tool to the phone. The hardware may be the same, however the command to enter the bootloader is not, I have bricked my Dopod 595 TWICE doing this- both times having the board replaced (under warranty luckily!). Up to you to attempt if you like- however I just don't see that it's really worth it until there is a dedicated and foolproof process.
Remember that these rom upgrades don't include the radio upgrade- so if you are upgrading your firmware for the first time, best to flash the most recent HTC WM5 upgrade first (incl. radio 1.38.x). Or an extracted Hermes radio rom. Just ensure it includes HSPDA.
If it's your first upgrade, and you don't like the idea of upgrading many times, I'd perhaps wait until a more final WM6.1 for Mteor is released (perhaps A3 or a RC).
I'm far from an expert, but have played with these, and my Hermes a lot. If I can perhaps answer anything else, please let me know...

MMS
jerpelea can u add MMS program to your A3 release???

stuartmclean said:
It sure does work with the 595, albeit with the issues mentioned in my previous post. I'm honestly not sure about the front-facing camera, hadn't tried it yet. Will try tonight and advise.
In terms of getting around the CID issues, there will be 3 registry edits you will need to make (need to copy regedit to phone and run to make changes), and also a piece of software to application unlock. This will make your phone Application Unlocked.
You then put Des' SSPL on the phone, run it and immediately press the power and camera buttons. It will then start with the special SSPL, which gets you around the CID locking. You can in theory update via the update software (RUU) after this, however I have always upgraded via putting the rom onto the memory card as "BREEIMG.NBH". There is packaging software that will allow you to put your own choice of radio, rom, splash-screen's etc together.
In terms of the SSPL process, this is very well documented on the forum. Just take a look. I would not attempt the SuperCID process suggested- which involves loading the Hermes unlock tool to the phone. The hardware may be the same, however the command to enter the bootloader is not, I have bricked my Dopod 595 TWICE doing this- both times having the board replaced (under warranty luckily!). Up to you to attempt if you like- however I just don't see that it's really worth it until there is a dedicated and foolproof process.
Remember that these rom upgrades don't include the radio upgrade- so if you are upgrading your firmware for the first time, best to flash the most recent HTC WM5 upgrade first (incl. radio 1.38.x). Or an extracted Hermes radio rom. Just ensure it includes HSPDA.
If it's your first upgrade, and you don't like the idea of upgrading many times, I'd perhaps wait until a more final WM6.1 for Mteor is released (perhaps A3 or a RC).
I'm far from an expert, but have played with these, and my Hermes a lot. If I can perhaps answer anything else, please let me know...
Click to expand...
Click to collapse
you sound pretty much like a guru here.. it will be very helpful if you can provide the links to the documentation of the CID, SSPL, ROM, or anything relevant here. i know i can do a search, but my 595 is out of warranty and it wouldnt want to risk killing the phone with the wrong process or procedure.. unlike the startrek thread, the superCID and unlocking process are well pointed(links) and explained in the ROM update packages. i find that Breeze's threads are a bit fragmented here..
so if it's not too much of trouble, maybe you can start a new thread explaining the unlocking, CID, SSPL, and Radio upgrades in detail. im sure the admin will make this useful thread sticky for nobs (like me). cheers.

have you looked into wiki?! there are many infos...
CID Unlocking isnt researched sofar that you can use it without starting the sspl from a running device... so that means theres no HARD SSPL yet...
and i think there would never be..
i have tested to flash devs sspl but it didn't worked...
i'm also on the side that the mteor is a smartphone thats not really widly in use... so theres no big community behind they develope!
DEv has done so much with his sspl...
and with wm6 and wm6.1 yet i think thats much more i have ever imaginaryed!

thank you again! but i still do not run rom Kitchen.

is it possible to put in the neo-plugin today app from the mteor wm6.0 roms?

lyf1998 said:
thank you again! but i still do not run rom Kitchen.
Click to expand...
Click to collapse
cant help
i have
.net 2.0
.net 3.5
visual c redistributable
windows XP sp2
Does not work on vista
BR

Hmm....
was what I got trying to upgrade...

techdev said:
is it possible to put in the neo-plugin today app from the mteor wm6.0 roms?
Click to expand...
Click to collapse
Yes but NO i will not include it
You have the kitchen you can include it if you like
This is a vanilla version
I will try to clean it of bugs
Everybody who wants an localisation or an software will have to add it
BR

Some questions

Hi!
After installing the HTC Toupad on my Kaiser, I have experienced big problems. Letters on the Keyboard (QWASYX) didn't work and even the onscreen keyboard didn't recognized these letters. So I decided to uninstall the application. But now I have other problems with my Kaiser and so I decided to Hardreset my device. But before I do this, I want to upgrade my Kaiser to WM6.1 and update it to the newest ROM/Radio.
Now I have some questions relating to that.
As a result that I am a Super Moderator in another forum I know that it is bugging if people don't read the Wiki/FAQs. I have read them, but I don't understand many things :-|
I have handled it to unlock my device, but when I was reading about updating to WM6.1, I saw only things like: "... works only with 6.1", update this, update that, and I don't know in which order.
First of all: Could anyone explain me how to update my Kaiser to WM6.1 and the newest Radio?
Secondly: What is this Duty FW? Is it a modified Rom with added apps?
Finally: I have a normal Kaiser. Not a Vario III, AT&T or something like that. Just the austrian version of the Kaiser with no brandings and so it would be good to have a Firmware without any brandings.
Thx in advance.
BTW:
ROM version: 1.56.405.5
Radio version: 1.27.12.11
Oh, I have forgotten one thing: Is it possible to change the LED blinking in the Phone Mode? To change it from green to blue?

The letter problem you were having was a simple fix with a cab that can be found all across this forum. All the ROM's can be found in the ROM Development forum and as far as what has been changed, modified, added, programs list, can all be found in the FIRST or SECOND post of each of the ROM's. So you will just have to read through them and find one that suits you best as they all have something different. Most of the radio's that can only be used on 6.1 ROM's will say "Will only work on 6.1 ROM's". And I would like to add even though you don't have at&t DON'T FLASH THE 1.65.17.10 RADIO.

KDKobes said:
The letter problem you were having was a simple fix with a cab that can be found all across this forum. All the ROM's can be found in the ROM Development forum and as far as what has been changed, modified, added, programs list, can all be found in the FIRST or SECOND post of each of the ROM's. So you will just have to read through them and find one that suits you best as they all have something different. Most of the radio's that can only be used on 6.1 ROM's will say "Will only work on 6.1 ROM's". And I would like to add even though you don't have at&t DON'T FLASH THE 1.65.17.10 RADIO.
Click to expand...
Click to collapse
Ok, thx first of all. Dutys rom sounds nice. What do I have to do first? It is still a little mystery for me ^^

alcbottle said:
Ok, thx first of all. Dutys rom sounds nice. What do I have to do first? It is still a little mystery for me ^^
Click to expand...
Click to collapse
You need to make sure before you flash a rom on to your kaiser that you flash hardspl - http://forum.xda-developers.com/showthread.php?t=334679, and than after successfully installing that you can flash the rom of your choice. Please read the first sticky thread under the kiaser rom development form - http://forum.xda-developers.com/showthread.php?t=369282; it has all the info you need pretaining to everything involved when it comes to flashing your kaiser. I strongly recommend you go through it and read the posts it points to that are relevant to flashing.
Once you have done that it is pretty simple process; just do yourself the huge favor and don't flash until you have flashed hardspl or you will brick your phone.

If its still a mystery I would start here http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
No pun intended.

@thesire
I have already installed HardSPL. Otherwise I couldn't have unlocked my device with this method: http://forum.xda-developers.com/showthread.php?t=361039
I have used just the Sim Unlocker Method. Not the Kaiser SIM/CID Unlocker & Changer
That's the reason, why my mobile phone is now with an english language
Just one important question: Do I have to change my current radio for the new Duty Release?
@KDKobes
Why shouldn't I flash THE 1.65.17.10 RADIO?

Some ROM's come with radio's some don't. Most of Dutty's ROM's come with radio's, but if you want to keep your radio then I would suggest finding a ROM without a radio in it or making sure yours is compatible with the WM 6.1 and reflash it back. The 1.65.17.10 radio will lock your phone to that radio only and you will not be able to change it until somebody can fix it. Alot of people are stuck with that radio now and can't change.

Dumping standard shipped ROM

Is there anyone who has succesfully dumped the Official Shipped ROM that comes with the European models ?
I'm sure that apart from me, there are other members who would like to revert to the offical ROM just in case something happens with the device. (need to send it back for a reparation)
I'm going to flash just right now anyway, as I'm positive that there will be someone in the future dumping the offical ROM.
\cheers, now pressing start
EDIT : After flashing I keep the high pitched noise that almost everyone is Reporting. I can't get rid of it. Be aware with this ROM,. you might get stuck with a hissing device that won't stop I'll wait for some solution and then flash again, can't use Winmo anymore

me too...please help us - i cannot use my device due to constant noising...

up0grading the EC chip drivers
I saw some remarks about the EC Chip driver update from HTC - will try that now, see if it helps anything at all.. For now, the device always hisses like a snake when Vista is active.
Without Vista active, it's mostly quiet, but gives no sound in WinMo, however, if you try to make a sound in WinMo, sometimes, after a few seconds, it will hiss and pitch for the duration of the sample played...
This is really annoying

hi,
i did a backup pof's way, so i have now part00.raw - part04.raw and SPL.nbh.
Rebuild Part02.raw and uploaded again. Working like a charm. Problem is: my original ROM is in German. anyone interested?

german but quiet is much better than english with noise.
please provide links.
Thanks

GERMAN..?
That sounds wonderful: need the the german ROM very urgent, can`t work with my beloved shifty...
Please share the ROM, thanks so much!

Me too!
I installed the GPS Bios pack - Easy BUT:
The noise only appears while staring after reinstalling the battery - just restart SnapVue after Vista is up and the noise is gone.
Also gone is the German keyboard under SnapVue - Regional settings don't change that!
GPS work in SnapVue and Vista (using ActiveSync & GPSgate - after test period ~30€).
Overnight SnapVue need app. double the energy than before!!!
Using GPS in Vista means NO internet/mail!
Wrong keyboard layout and battery drain tempt me to reinstall an original German ROM and to continue using my dear old eTrex with USB together with my Vista progs.
So, how and where2 can I find the German ROM?
Thanks,
Axel

Send the Rom-Link to a victim already. Waiting for an OK before i publish.

Victim report Nr. 1:
@tece: Thanks a lot, man, good job, it works fine..!
Regards and thanks a lot.
Alex

great!!
i noticed that pocketie is already installed and that \Windows\StartUp\PKG.exe and BlockTitleBar.exe are already removed.(like i did as described in this: http://forum.xda-developers.com/showthread.php?t=377441 thread before backing up the original ROM). Now I'm looking to get the registry preconfigured to not start Snapvue. Liberated German ROM will get released this weekend. If you can't stand waiting for that ROM send me or traumrakel a PM for the rapidshare link.

If you could include the liberation into the new ROM I would prise your name... ;-)

and here it is: http://forum.xda-developers.com/showthread.php?t=417901

I have rom dumps of:
- 1.30 WWE
- and whatever rom the CDMA shifts have.
does anyone need either?

cmonex said:
I have rom dumps of:
- 1.30 WWE
- and whatever rom the CDMA shifts have.
does anyone need either?
Click to expand...
Click to collapse
hello cmonex,
i m running the german rom as i do not have my original french dump, i would be very happy to install 1.30 WWE!!
even if tece rom is great in order to learn some german word

cmonex said:
I have rom dumps of:
- 1.30 WWE
- and whatever rom the CDMA shifts have.
does anyone need either?
Click to expand...
Click to collapse
Do you have the reconstructed ROM of version (original UK Shift): 1.30.405.0 WWE ? Can u post it/send it? Then I don't have to rebuild it myself, because I'm not that experienced it rebuilding myself. Also in case my rebuilded rom fails to work.
Many thanks!

cmonex
Could you please share the 1.30WWE
Thanks
Ram

You have it, it's the one having gps and sound bugs with european radios.
I'm using 1.22 because it's a stable base. Later version doesn't give you much, as graphic drivers are disabled anyway.

thaihugo
Cool. I followed pof's suggested way of dumping the original rom. Now I got all the raw files with correct start addresses. I am wondering whether I did correctly or not for SPL.NB. because the file size is 256 KB since I passed the same length 262114 as read in pof's post. When I used KaiserKitchen to reconstruct, I don't have baseRom and if I ignore that, I am not gettting the NBF file. I want to backup my CHT ROM and install your's (1.22 with GPS and sound). Could you please shed some light?
Thanks
Ram

Hi Cmonex ;
I need the non-touched 1.30 WWE rom for shift ; can you share please ?
Safak

Thaihugo , Saiweb
Do you have 130 WWE non-touched original rom ? I ve downloaded one from the forum but it is the "telenav"ed orig one , which i can not use at all...
Can you share if you have ?

Need help finding out whats been done to my Tilt.

Hi!
This week I bought a Tilt secondhand. I'm sure that some work has been done to it. First I noticed that the previous owner has using a non AT&T SIM, I'm an AT&T subscriber, so at least it's sim unlocked. Then I noticed that when I turn it on there's no AT&T animation, there's a HTC animation. I also noticed that when I turn it on or soft reset it, after the "Smart Computing" comes up, there're some numbers in the lower right corner.
R: 1.65.17.56
G: 25.83.40.02H
D: 3.28.00.00
I registered here before I decided to buy the Tilt and I read many of the treads, so I know that many kinds of ROMs and programming exists for this device. So, what I want to know is how do I know what was done, installed, changed to this Tilt?
Thanks

Maybe I'm wrong, but it sounds like whoever last owned the device flashed an HTC ROM onto it.
Dave

Easy. Go to Start>Settings>System>Device Information You should be able to read the ROM version installed.

Yeah I guessed they changed the original rom, the rom installed is 3.28.405.0 WWE, DATE 05/02/08, radio 1.65.17.56 & protocol 25.83.40.02H. Still that doesn't tell me much.

I need to know which of all the ROM I read mentioned on the forums is the one installed, I need to know if there's a better alternative & I need to read a whole lot more to understand all my options here.

you just need to flash and find out for yourself don't ask "what is the best rom" its a matter of opinion and you can get banned for asking that.
here are some links to get you started with flashing
ROM flashing FAQ
Introduction to ROM flashing
MODS PLEASE CLOSE THREAD

Headroom said:
I need to know which of all the ROM I read mentioned on the forums is the one installed, ...
Click to expand...
Click to collapse
Simply compare it with the SHIPPED ROM List in the WIKI! I am sure they flashed the ORIGINAL SHIPPED HTC Rom ... ! BTW: If it is the original AT&T Tilt, then they have (for sure) performed a SIM UNLOCK and in addition a CID UNLOCK. From my point of view, I do not concider an item as NEW if someone did this to a device!
Headroom said:
... I need to read a whole lot more to understand all my options here.
Click to expand...
Click to collapse
Yeah, I guess you really have to do some READ-UP! Start here ...

Thanks Junner2003!!
This is the kind of information I was looking for. I suppose that the higher the rom number, the more updated the rom is?

In general: it is a newer ROM if the number is higher. However, that does not necessary mean that the ROM is better. Newer ROMs contain for sure BUG FIXES for older ROMs but mostly contain a whole bunch of new bugs as well.
If you stick with an older ROM, it has the advantage that often users came up with a BUG FIX for well known issues or at least they can provide some kind of workaround.

OK so I checked the ROM Wiki and found my rom number (3.28.405.0 WWE). Would it be correct to say that the upgrade would be 3.34.721.2 WWE? Is the country code what defines what I can use?
PS:
I must be real slow because I get timeout & have to relogin before I can finish an answer to any post.

Headroom said:
OK so I checked the ROM Wiki and found my rom number (3.28.405.0 WWE). Would it be correct to say that the upgrade would be 3.34.721.2 WWE? Is the country code what defines what I can use?
PS:
I must be real slow because I get timeout & have to relogin before I can finish an answer to any post.
Click to expand...
Click to collapse
WWE is World Wide English so if you speak English it would probably not be a good idea to flash a rom in a foreign language like Australian or something.
Yes it is the newest rom , released in Oct
http://forum.xda-developers.com/showthread.php?t=439408