Database Develop

Flashing to the P3600i

There is already a thread on this, but I'm starting a new one as I feel the old one has deviated from its purpose of finding a workaround for the P3600i
For those of you who have not been following...
The current SSPL, Hard-SPL, Super CID methods used to bypass Trinity
(P3600) SPL do not work on the new HTC P3600i.
Here's the reason why:
pof said:
The P3600i has 256MB NAND in oposite of the 128 Mb NAND of the regular P3600.
To flash this device you need bootloader 3.x or higher, and OS rom must be tagged 0x401 in the NBH (not 0x400, which is used for 128Mb NAND), also you should use a new RUU (the on the official WM6 rom should be ok).
Click to expand...
Click to collapse
It was recommended that Olipro be contacted about this, so I did and this is what he had to say.
[/QUOTE]
What that means is that firstly; you need one of the newer SPL versions; send me one and I'll patch it.
secondly; you need to dump your OS from the NBH and then rebuild it using 401 as the code for it (default is 400)
Obviously you could also crack the NBH open in a hex editor and just change the value, your choice entirely.[/QUOTE]
I'm don't have the technical expertise at present to do the above & am kinda pressed for time to learn so I'm hoping someone will be able to help.
Does anyone have the Newest SPL version extracted that they can post?
Can anyone suggest a hex editor to change value to 401 & explain exactly how this is done. I tried using a random hex editor and was confused by the max of hex before my eyes, I'm not sure what I'm supposed to be changing.
Thanks

i'm using htc 3600i too , waiting for success flashing and cooking rom for it.

Surely someone has extracted the SPL-3.03.0000 boot loader.
Please if anyone has it, can you post.
I saw it posted before, but neglected to DL it cause i thought I'd never need it.
I've searched through 40+ pages and have not been able to find. I probably just keep keep missing the page it's on...the search is not the greatest.
I would be forever grateful to the kind soul who would take the time to help a brother out...
After all, "there comes at time, when we all need..."

Here is SPL 3.03.0000 from this official ROM "RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe" (which I believe is the ANZ release).
I managed to upgrade my P3600i from this version which was on the phone when I bough it "RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship.exe" (which I believe is the SEA release).

i'm waiting for this solution..

wjohnsaunders said:
Here is SPL 3.03.0000 from this official ROM "RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe" (which I believe is the ANZ release).
I managed to upgrade my P3600i from this version which was on the phone when I bough it "RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship.exe" (which I believe is the SEA release).
Click to expand...
Click to collapse
You're a ledgend thanks so much buddy.

hey guys,
So actually how am i suppose to use the SPL 3.03.0000 thingy that was uploaded ? sorry , newbie here
thanks =)

any new development about the flashing issue?
I hope I can backup my ROM and then use some cooked ROM from this wonderful site

pazuho said:
any new development about the flashing issue?
I hope I can backup my ROM and then use some cooked ROM from this wonderful site
Click to expand...
Click to collapse
We need a patched version of the SPL 3.003... Olipro agreed to do so and I've sent him a PM. Still waiting to hear back.
Secondly we need to dump the ROM from the NBH and rebuild it using 401 as the code (the default is 400)
Or you could:
Crack the NBH open in a hex editor and just change the value, your choice entirely.
I'm don't have the technical expertise at present to do the above & am hoping someone will dump the rom then rebuild as mentioned above or post a tutorial on using a hex editior to change the value.

CHT9110
capeli said:
We need a patched version of the SPL 3.003... Olipro agreed to do so and I've sent him a PM. Still waiting to hear back.
Secondly we need to dump the ROM from the NBH and rebuild it using 401 as the code (the default is 400)
Or you could:
Crack the NBH open in a hex editor and just change the value, your choice entirely.
I'm don't have the technical expertise at present to do the above & am hoping someone will dump the rom then rebuild as mentioned above or post a tutorial on using a hex editior to change the value.
Click to expand...
Click to collapse
Do you get answer from Olipro? I'm sure many people's here are waiting (yes incld me

No word yet. Still waiting

waiting for solution. hope we can play with 3600i soon

Ok. So I'm confused as there are some contradictions. Is it possible for a cht 9110, purchased in Taiwan, to be flashed to an English version using the HTC official website download? Or is that why everybody is waiting for an unlock/flash method?
I can maybe live without any of the real nice rom tweaks that get developed here for at least a little while but I'm not sure how far I can get using the default Traditional Chinese as I'm not a native speaker. The cht 9110 is being offered in Taiwan at a much cheaper price than elsewhere which is one reason I don't want to have one shipped in with the factory English rom already installed. Thanks in advance for any clarification.
p.s. I should probably mention that I have not purchased one yet which is one reason why I can't answer this question myself. Thanks again!
p.p.s. The lady at ChungHwa Telecom said they were sold out all around Taiwan. They'll call me back in two weeks when they get more in from HTC.

I think it is possible to flash the offical englsh rom in the cht9110
as people said they can flash the official ROM into the P3600i
just can't use those cooked roms here

pazuho said:
I think it is possible to flash the offical englsh rom in the cht9110
as people said they can flash the official ROM into the P3600i
just can't use those cooked roms here
Click to expand...
Click to collapse
No no, I'm using CHT9110 from Taiwan with Chineas rom. and I try to flash with Official WWE rom, it will give you error of Invalid ID.
Sorry..the corrected error message is " Invalid Vendor ID"

Any news from Olipro?
keen to try out the roms in development here as well.

I have a CHT9110 and I have just failed to upgrade it with Official English ROM downloaded from Dopod's website....need to convert Traditional Chinese Version to WWE version.....

Me too. Can you please share the official WWE Rom, I can't download it. Is this the "Wrong device ID" issue ?

OK guys, I'll sort this all out for you.
Firstly I need a volunteer (capeli perhaps?) your device won't be harmed as part of my testing by the way.
I'll need someone so I can run through soft-loading the SPL and flashing it on etc.
now, unfortunately, my ISP has royally ****ed up my ADSL line, so currently I'm running via my PDA, which is costing me £1 per megabyte, which is rather unpleasant, so please do bear with me guys.
capeli: I'll get the SPL patched shortly for testing, cheers mate.

Waiting Also. I am inAusralia with a new 3600i and would like one of the cookeed ROMs I have been reading about. I will keep close to theis thread for an outcome.
Perhpas I could bother you all with some questions:
Will a new ROM affect what is on my device currently?
Will it affect my 3G settings to my service provider Telstra?
Will it affect third party apps I have instaklled; TomTom, Task Manager, TouchPal?\
Can I go BACK if needed?
tchoklat

Some questions

Hi!
After installing the HTC Toupad on my Kaiser, I have experienced big problems. Letters on the Keyboard (QWASYX) didn't work and even the onscreen keyboard didn't recognized these letters. So I decided to uninstall the application. But now I have other problems with my Kaiser and so I decided to Hardreset my device. But before I do this, I want to upgrade my Kaiser to WM6.1 and update it to the newest ROM/Radio.
Now I have some questions relating to that.
As a result that I am a Super Moderator in another forum I know that it is bugging if people don't read the Wiki/FAQs. I have read them, but I don't understand many things :-|
I have handled it to unlock my device, but when I was reading about updating to WM6.1, I saw only things like: "... works only with 6.1", update this, update that, and I don't know in which order.
First of all: Could anyone explain me how to update my Kaiser to WM6.1 and the newest Radio?
Secondly: What is this Duty FW? Is it a modified Rom with added apps?
Finally: I have a normal Kaiser. Not a Vario III, AT&T or something like that. Just the austrian version of the Kaiser with no brandings and so it would be good to have a Firmware without any brandings.
Thx in advance.
BTW:
ROM version: 1.56.405.5
Radio version: 1.27.12.11
Oh, I have forgotten one thing: Is it possible to change the LED blinking in the Phone Mode? To change it from green to blue?

The letter problem you were having was a simple fix with a cab that can be found all across this forum. All the ROM's can be found in the ROM Development forum and as far as what has been changed, modified, added, programs list, can all be found in the FIRST or SECOND post of each of the ROM's. So you will just have to read through them and find one that suits you best as they all have something different. Most of the radio's that can only be used on 6.1 ROM's will say "Will only work on 6.1 ROM's". And I would like to add even though you don't have at&t DON'T FLASH THE 1.65.17.10 RADIO.

KDKobes said:
The letter problem you were having was a simple fix with a cab that can be found all across this forum. All the ROM's can be found in the ROM Development forum and as far as what has been changed, modified, added, programs list, can all be found in the FIRST or SECOND post of each of the ROM's. So you will just have to read through them and find one that suits you best as they all have something different. Most of the radio's that can only be used on 6.1 ROM's will say "Will only work on 6.1 ROM's". And I would like to add even though you don't have at&t DON'T FLASH THE 1.65.17.10 RADIO.
Click to expand...
Click to collapse
Ok, thx first of all. Dutys rom sounds nice. What do I have to do first? It is still a little mystery for me ^^

alcbottle said:
Ok, thx first of all. Dutys rom sounds nice. What do I have to do first? It is still a little mystery for me ^^
Click to expand...
Click to collapse
You need to make sure before you flash a rom on to your kaiser that you flash hardspl - http://forum.xda-developers.com/showthread.php?t=334679, and than after successfully installing that you can flash the rom of your choice. Please read the first sticky thread under the kiaser rom development form - http://forum.xda-developers.com/showthread.php?t=369282; it has all the info you need pretaining to everything involved when it comes to flashing your kaiser. I strongly recommend you go through it and read the posts it points to that are relevant to flashing.
Once you have done that it is pretty simple process; just do yourself the huge favor and don't flash until you have flashed hardspl or you will brick your phone.

If its still a mystery I would start here http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
No pun intended.

@thesire
I have already installed HardSPL. Otherwise I couldn't have unlocked my device with this method: http://forum.xda-developers.com/showthread.php?t=361039
I have used just the Sim Unlocker Method. Not the Kaiser SIM/CID Unlocker & Changer
That's the reason, why my mobile phone is now with an english language
Just one important question: Do I have to change my current radio for the new Duty Release?
@KDKobes
Why shouldn't I flash THE 1.65.17.10 RADIO?

Some ROM's come with radio's some don't. Most of Dutty's ROM's come with radio's, but if you want to keep your radio then I would suggest finding a ROM without a radio in it or making sure yours is compatible with the WM 6.1 and reflash it back. The 1.65.17.10 radio will lock your phone to that radio only and you will not be able to change it until somebody can fix it. Alot of people are stuck with that radio now and can't change.

Blackberry Connect - bbconnect - on Touch Diamond

Hi All.
So here we go again - trying to get Blackberry Connect to work on a new device..... so we've succeeded on the Kaiser and Touch Dual with both original and cooked rom's but I can't get any version to work on the new Diamond - received mine yesterday after frying the mini usb port on my Touch Dual and its one of the 1st things I installed? I've tried all the current fixes (I think) most of them summarized here in Elec.Two's post:
http://forum.xda-developers.com/showthread.php?t=371652
I'm hoping there will be a few others out there working on the same problem - I've just changed my aku back to .1.1.4 - I can get the device to sync when connected using activesync as a pass-through connection but get the "old" data tunnel available message and then it flips to "not connected" .....
I'll keep trying and keep this thread updated but could really use some help!

Hi, Im trying to change the name of this. I would like to change it to HTC-Herm200 or someting else. But I dont know what the build number have to be there. Anyone know ?

this has NOTHING to do with rom development... use some sense people! moving thread!

ROM Development????
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
I currently have WWE_1.34.831.1_52.24.25.08_0.93.25 loaded and have tried the standard "Tweaks" from past "ROM Development" but none have worked so far? I'm on constant watch for another ROM release (Cooked or Stock) or a Registry fix to help solve the problem?
ShogunMark - do you really think the thread was in the wrong place???? If its not ROM development then I'm in need of some guidance?

Im tying to change in HEX Editor the Signatures. For example there are DIAM100 (or DIAM10000) and build 19588. I changed it to HERM200 and 19588->17745. I can change it without changing the size of .nbh. But thre are "Diamont" Signatures too and by changing Diamong->Hermes wir have one less character (7->6). It changed the size of the .nbh.
So im trying to flash it to the Diamond nad about 96% OK, but then ROM flash error.
A meaning of it all is that it have to work, because RIM asks the Number and NAME and then when its in the list->OK, NO->pending.
I need some tools like SSPL 1.34 and ROMUpdate Utility that dont asks of CRC or something else.
Please Help

I've seen a few members reporting that they have a later ROM version > 1.35.707.3 - See thread http://forum.xda-developers.com/showthread.php?t=394985&page=12 I have not been able to find this as an officially released ROM and I'm not aware that its been dumped as yet? This slightly newer ROM may help solve the problems and may help usap with his question on the version number?
If there's anyone out there who know's the AKU and the version number for ROM 1.35.707.3 can you let us know???
Thanks

Blob8me said:
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
I currently have WWE_1.34.831.1_52.24.25.08_0.93.25 loaded and have tried the standard "Tweaks" from past "ROM Development" but none have worked so far? I'm on constant watch for another ROM release (Cooked or Stock) or a Registry fix to help solve the problem?
ShogunMark - do you really think the thread was in the wrong place???? If its not ROM development then I'm in need of some guidance?
Click to expand...
Click to collapse
he moved the thread as it WAS in the wrong place, blackberry connect isnt related to Diamond ROM Development.
Yes you have to Hex edit the ROM to get it to work, but it doesnt belong in that forum, and to your other question the newer build of ROM is not a newer AKU or build.

walshieau said:
he moved the thread as it WAS in the wrong place, blackberry connect isnt related to Diamond ROM Development.
Yes you have to Hex edit the ROM to get it to work, but it doesnt belong in that forum, and to your other question the newer build of ROM is not a newer AKU or build.
Click to expand...
Click to collapse
I disagree - for most every other device - getting bbconnect to work has been the result of ROM Development - if your familiar with the other device forums - you'll see that Blackberry discussion is often linked with and found in the ROM development forum?
HOWEVER - I dont really care which thread it sits in as long as "we" can work on a solution if there is one available?
FINALLY - Thank you for the information on the Malaysian ROM

Blob8me said:
I disagree - for most every other device - getting bbconnect to work has been the result of ROM Development - if your familiar with the other device forums - you'll see that Blackberry discussion is often linked with and found in the ROM development forum?
HOWEVER - I dont really care which thread it sits in as long as "we" can work on a solution if there is one available?
FINALLY - Thank you for the information on the Malaysian ROM
Click to expand...
Click to collapse
yes the ROM needs to be HEX edited but it has nothing really to do with the "development" of a ROM .
so when we get HardSPL ready and installed i will show everyone how to hex edit the ROM NBH files and then reflash it so bb connect can be used.

Blob8me said:
Not sure what usap 's post is all about but my question is very much about ROM development? I'm looking for a registry change that will fix the problem that the CURRENT STOCK ROM has that means that bbconnect will not work?
Click to expand...
Click to collapse
I'm not sure who to agree with...it really shouldn't matter so much to people.

Dark Fire said:
I'm not sure who to agree with...it really shouldn't matter so much to people.
Click to expand...
Click to collapse
Agreed - It shouldn't matter and here it will stay
I'm hoping for a tweak to the stock ROM (or even a "fixed" stock ROM to be released as I've heard that a next build Rom is due soon - and this has neen the main reason behind the delay in the UK and EU formal release??? Apparently - despite the popularity of "our" site less than 5% of device owners actually change anything on their phone never mind update firmware - official or otherwise? HTC are trying to minimise "support" issues by ironing out as many bugs before the next release - I know for a FACT that they use this site as a major test ground for any new device - so maybe the expansys release was intended after all???)
Thanks again.....

Blob8me said:
I'm hoping for a tweak to the stock ROM (or even a "fixed" stock ROM to be released as I've heard that a next build Rom is due soon - and this has neen the main reason behind the delay in the UK and EU formal release??? ... I know for a FACT that they use this site as a major test ground for any new device - so maybe the expansys release was intended after all???)
Click to expand...
Click to collapse
Yep, all of the evidence suggests that that's the reason behind the delayed release in Europe. New ROM. Hopefully with none of the bugs we've found so far (but I doubt it).
And that's a really interesting fact. It would be both nice and worrying to know that we influence them. (Nice when good devices like the Touch Diamond are announced, but worrying when there are major problems, such as that big driver problem).

Offtop (maybe)
I was playing yesterday with another phone and became the ROM extracted. So Registry and some of the files have the name of it in it. And I changed it to another name (Herm200 and HTC-HERMES) so that after the recreating and flashing the ROM it was everywhere Hermes. But PHONE ROM was dead (No signal, no phone). There were some imei*.pfg and some *.rgu and *.dsm where I changed all to HTC-HERMES and HERM200. So I had to flashing it to normal ROM.
And by the Diamond i worked with not extracted ROM. So i think there are 2 roads to change it: in extracted and not extracted ROM.
What do you think about it?

UPDATE on 1.34.831.1 and bbconnect?
Have just tried all the usual routes with the new EU Rom (details below) having used OliNex's SPL to Flash:
ROM: 1.34.831.1 WWE
Date: 5/25/08
WM6.1 CE OS 5.2.19588 (Build 19588.1.1.4)
Radio: 0.93.25.NS16
Protocol version: 52.24.25.08H
Still no success..... I've seen that there are other Roms also out there such as 1.35.871.5 but not yet available?
I was hoping that the Stock EU Rom would be OK as in the past the Stock "Official" Roms have run bbconnect with no changes and no problems???
If anyone has any other suggestions then your help would be greatly appreciated?

UPDATE ON Elite 1.0 and bbconnect....
Still nothings working - Sigh.....
I've got a specific request in the main Elite 1.0 Rom thread for walshieau to add bbconnect support now that HSPL is released - so hoping it wont be too long now!

walshieau said:
yes the ROM needs to be HEX edited but it has nothing really to do with the "development" of a ROM .
so when we get HardSPL ready and installed i will show everyone how to hex edit the ROM NBH files and then reflash it so bb connect can be used.
Click to expand...
Click to collapse
walshieau - any news on working on a solution now that we have HSPL out???? Can you add bbconnect compatability to the next Elite release????

UPDATE on 1.37.405 and bbconnect
Just added a comment on the main thread for this, the latest WWE EU Rom Release...... still not playing....
USAP - Any more thoughts??
walshieau - come on - you promised to help with a solution.....??? Help me out here????

Refresh......
Just refreshing as I'm getting desperate for a solution as I use the blackberry function for work and really don't want to switch back to my touch dual - has ANYONE had any success on the diamond with bbconnect?

Another "post" refresh.....
I'm still struggling to find a solution for this....???? In fact, I'm starting to wonder if there is a solution at all? Has anyone had any success at all with installing blackberry connect on any of the diamond Roms?

Blob8me said:
I'm still struggling to find a solution for this....???? In fact, I'm starting to wonder if there is a solution at all? Has anyone had any success at all with installing blackberry connect on any of the diamond Roms?
Click to expand...
Click to collapse
me waiting for a solution also. from what i notice, we just need 1 carrier to support bb on the diamond n we r all set. currently this is what i hav experience with the touch n touch dual which i have been able to connect despite local carrier not supporting it.
give a shout out if u do come across a solution though.

Where to start?

Ok, some of you may remember me from the Wizard world. I am the chef for the "Jag" series and "NTS" of roms there. They are old roms I know, but then i decided to be stupid and went to the SP world with a Moto Q9h, 6 months in, I miss my touch screen. I have an AT&T Tilt on the way now. So, to the main point of this post.
Where do I start with unlocking the Tilt, and also, Since I am on AT&T what is the deal with the radios. I know I want to use a non standard ROM on this phone since bloat ware pisses me off.
How do i determine what radio with what rom and so on?
Thanks for your help. I have tried to search the forum for answers but I am totally lost here. Guess I need to leave behind the world of the Wizard and one radio for all roms. LOL.
I missed you guys!!!!

Re the unblocking I think that id the CID Unlock guff you have to run (don't quote me, my phone was already unlocked)
Then read the pages on flash tutorial which turns out to be easy to do and then pick a ROM to flash and away you go

Wow 738 posts and you don't know how to read stickys.
Check the links in my sig (and just about anyone elses) or the sticky in just about every forum for the kaiser.
welcome back.

Ok, So just to test my understanding, I need to check each ROM release and see which HardSPL they used to make the ROM.
Example:
The Garmin.DK.1 WM 6.1 Premium ROM states the instructions are to install HardSPL 3.56. I have read how to do this and it seems pretty self explanitory in the instructions. After that, then I flash the rom, once the rom is complete, I do a hard reset on the phone.
Am I correct in those steps?
Now, my next question.
I have read here in the wiki that I need to ensure that I am using the correct Radio for my phone. Confused here a little bit.
Dutty's WM6.1 Hybrid v2 has this little disclaimer on the second post,
There will be 3 roms compatable with the latest AT&T Radios 1.65.14.06 and Radio 1.65.17.10
Click to expand...
Click to collapse
Does this mean I have to hunt down a specific version of the radio in order to use this ROM?
Thanks again for the help.
738 posts does not mean I should know how to read a sticky. Most of the stickys on the Wizard forum werent stickys when I read them....
And I have worked with alot of the authors of those stickys too.

There are a few things you want to do:
First, install a hardspl I would recommend 3.28, 3.29, or 3.56
Second, security unlock your device
Third, Flash a Rom. A majority of the rom's here come with radio's. The best radio's available right now are 1.65.20.29 (great with getting a quick gps fix and fairly stable) 1.58.25.17 (which is compatible with almost every cooked rom here which offers great battery life and fairly stable reception at least in my area) or the newest available radio which is in my signature (offers decent gps fix, great reception and a decent battery life.
It is easier to learn as you go rather than attempt to cram it in all at once.
Good luck

Thank you red.
I just dont want to brick my tilt first attempt. I guess what im looking for is a quick rom, very stable and has no bloatware.
I think iwill work on the device with standard rom first so that I can learn the device itself. Then i will start reading rom release posts...... every page.
I like to have all info before i take the first step. expecially on something this expensive.

Help camera doesnt work

Hi im from mexico(my english sucks) and i have an atyt tilt i unlocked to can use in my country but since i unlocked the camera doesnt works ,when i open the camera app i can see all the menu and options but is just black i mean you cant take pictures because all is black anyone know what can be?
The info of the bootloader or whatever is.
Security Unlocked
KAISI*0 MFG
SPL-1.0.OliPof
CPLD-8
And system info.
Rom version. 3.57.502.2WWE
Radio version. 1.70.OliNex
Protocol version. 25.65.30.04H
Is there any chance that the camera and other functions works even if the tilt is unlocked
PD. I unlocked the tilt with the KaiserUnlocker.exe
Thanks

tryambaka said:
Hi im from mexico(my english sucks) and i have an atyt tilt i unlocked to can use in my country but since i unlocked the camera doesnt works ,when i open the camera app i can see all the menu and options but is just black i mean you cant take pictures because all is black anyone know what can be?
The info of the bootloader or whatever is.
Security Unlocked
KAISI*0 MFG
SPL-1.0.OliPof
CPLD-8
And system info.
Rom version. 3.57.502.2WWE
Radio version. 1.70.OliNex
Protocol version. 25.65.30.04H
Is there any chance that the camera and other functions works even if the tilt is unlocked
PD. I unlocked the tilt with the KaiserUnlocker.exe
Thanks
Click to expand...
Click to collapse
Its your radio! Go here and flash another radio! http://forum.xda-developers.com/showthread.php?t=393182 If you have anymore questions let us know!

Wrong components wont fit together correctly
Cal-El said:
Its your radio! Go here and flash another radio! http://forum.xda-developers.com/showthread.php?t=393182 If you have anymore questions let us know!
Click to expand...
Click to collapse
Not only the radio (although I've not seen that version before) but more importantly the version of hardSPL used is for WinMo 6.0 and NOT WinMo 6.1 ROMs. A ROM that starts with 3. something is a WM 6.1 ROM. Altogether a real hotchpotch mixture. The OP needs to carefully check to make sure all the ingredients match up if the recipe is to succeed! Just realised it's the OPs first post so he or she may want to read the wiki (the link near the top of the page) about all of this stuff to get the gist before taking any further steps.

Flying Kiwi said:
Not only the radio (although I've not seen that version before) but more importantly the version of hardSPL used is for WinMo 6.0 and NOT WinMo 6.1 ROMs. A ROM that starts with 3. something is a WM 6.1 ROM. Altogether a real hotchpotch mixture. The OP needs to carefully check to make sure all the ingredients match up if the recipe is to succeed! Just realised it's the OPs first post so he or she may want to read the wiki (the link near the top of the page) about all of this stuff to get the gist before taking any further steps.
Click to expand...
Click to collapse
Well now im confused my titl have windows mobile 6.1 and i unloked with the kaiserunlocker and i thinkk ive read thatit can be used on 6.1 sooo anyway how i can get the phone unlocked and all functional??? i need to change the rom or radio or what i need to do ?? thanx

tryambaka said:
how i can get the phone unlocked and all functional??? i need to change the rom or radio or what i need to do ?? thanx
Click to expand...
Click to collapse
Please read all of the wiki for the Kaiser and all the information about which ROMs and Radios go together (links in the Kaiser wiki). Also read up about SPLs and then get back with which specific questions you have that aren't already covered. No one is going to hold the hand of newcommers who haven't fully researched things first. A hint is that the hardSPL versions starting with 3.something are for WM 6.1 ROMs whereas hardSPL versions starting with 1.something are for WM 6.0.

Hi Flying Kiwi
I guess we are or were all noobs at one point and everyone should read and research problems before asking questions. However sometime even when you research and dig through the vast volumes of info you still need a little help. All this info can be a little intimidating especially when you are new to the process. then to get an answer that (No one is going to hold the hand of new commers who haven't fully researched things first.) Well that could even make that person a little more intimidated the next time he/she has a question.
I have been lurking arouind here for a while reading and digging for info on different roms, radios, themes. I have flashed a few roms now and still have questions but am not sure I should ask them because some where in this massive web site there might be a wiki I might have missed, and I too will become one of those noobs who get chastised by a senior member for not doing enough research.
I also have a Tilt and have flashed pda ultimate Full v15 Rom date 01/01/08 radio that is recomended by the rom 1.65.24.36. Protocol 25.94.40.06H.
I used HardSPL 3.29 with windows 6.1 I have even downloaded a few fixes for my camera that have not worked, still a black screen. But I am still trying to get it to work. other roms I have tried Duttys and hyperdragon the camera worked, but quit after a while with hyperdragon. More than likely something I did or installed to make it stop showing up on the screen. We are all unsure at some point.
Not looking for someone to hold my hand just looking for help without the frustration of someone who has been doing this for a while and thinks everyone should be as good as they are at thinking through a problem.
Not trying to step on your toes and hope you don't take this the wrong way, I have seen others with the same frustration in their answer.
Regards,
Tim