Remove tab in TouchFLO 3D - Touch Diamond, MDA Compact IV General

anyone know how to remove useless TAB in TouchFlo 3D ?

anyone thanks

i would like to bump this because i am also interested in the topic

The tool in this thread can do exactly that

I tried this tool, and i manage to take the internet tab in TF3D off, but no way to put the "calls" tab... and i didn't manage to put the internet tab back... but perhaps i'm doing something wrong...
But if for sure you want to remove a tab, it worked.
Ciao
Fred

drvdijk said:
The tool in this thread can do exactly that
Click to expand...
Click to collapse
This is a great tool, but when I used it on my stock rom the album didnt work?! "photos&Videos" didnt show any pictures I only could launge the camera

omaga said:
This is a great tool, but when I used it on my stock rom the album didnt work?! "photos&Videos" didnt show any pictures I only could launge the camera
Click to expand...
Click to collapse
you have to select and album to be your favorite then the album you selected will be shown in pictures and videos tab

charly_mx said:
you have to select and album to be your favorite then the album you selected will be shown in pictures and videos tab
Click to expand...
Click to collapse
OK! Must try that..thx for the tip charly, didnt now that

Is there any way around the program ... say editing a registry?

Diamond TF3D Config 0.6.7
check this
http://forum.xda-developers.com/showthread.php?t=405749

I'm aware of the TF3D tool. For the most part, I'm able to edit my registry manually just as if I were to check and uncheck the options available on the tool. I'm stump as far as "removing" a TF3D tab. I'm a space conscious guy (granted however small the file may be) - I will only resort to downloading a program when I have exhausted all possibilities. I've spent hours going through the registry but still no go. Any help would be great!

from http://forum.xda-developers.com/showthread.php?t=423647
- you can edit \windows\26948339_manila (i used total commander to edit)
- the tabs are listed like the calendar example you see there
- just remove the ones you don't want. you can also change the order. just make sure there's no gap between the numbers.

Related

FTouchFlocube complete

i found this file in trinity forum. it works perfectly. some of it is in french and some of it is in english. can someone help to clean up.
it is the complete cab including ftouchflo, schaps config, and cube all in one cab file. just install and use.
woow, does it work on any Device ??
I installed it, nothing shows up in the today screen. I've tried to play around to make the cube show but nothing happens.
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
herg62123 said:
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
Click to expand...
Click to collapse
Nice it work after I configure it.
EDIT: Anyway to change it from Spanish to English?
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
ladytoast said:
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
Click to expand...
Click to collapse
Haha yeah herramientas mean Tools in Spanish.
I had to remove this program because it was messing up with the slide 2 unlock program.
Sensational find, well done
The program works great and has a huge coolness index factor....
I tried to set the photos to open a file in the storage card and would not do it. Is it limited to opening files that are only in the device memory? Can it address files in the sorage card?
Nice program overall.
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
taiseer999 said:
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
Click to expand...
Click to collapse
Well, just un-installed the Spanish version and installed this. Appears to work perfectly, I can't see any problems at the moment. I had to rename the FTouchFlo folder so that the configuration tool would work but other than that this was too easy.
First class work!!
go into config cube and all word editing done from there.
found 6 side cube vista like and settings to change the programs
herg62123 said:
found 6 side cube vista like and settings to change the programs
Click to expand...
Click to collapse
.... but not working on Kaiser!
TQM
Hi,
just one question: does the TouchFLO CUBE work on the TYTN II ?
I heard that on Tytn II it needs a cooked ROM not just a sw on top of already installe TouchFLO.
Could somebody tell me something ?
Thanks in advance
works perfectly after configuring it, gotta get use to the spanish though but i guess im taking it as a humor thing LOL
hi i have problem with the ftouchflo after installing it .....
i do have a problem with the text on mine, i mean in office words and messaging,
I cant select the text (that is to use stylus click drag a paragraph of text) to be copy and paste or something like that.......... i cannot select the whole text...maybe u can help me?? this applies in excel,words, messaging, notes, task ...but in appointment i can select a few text.......................also in resco explorer, normally i can click drag and select a few files to multiple delete (and no i dont wanna use the multi seelect, its extra buttons..)
and btw i have added all the above mentioned files intothe config for exclusion of scrolling and stuffs..........so maybe u can help me? thanx alot
I think the touchcube thing is cool, but i would rather it only works on the homescreen, its just annoying anytime else, when trying to do daily activities and you bring up the cube or minimize the program. can this be done?
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
fluxs2 said:
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
Click to expand...
Click to collapse
deinstalled everything for the third time.. did a reinstall.. copied all the folders again to "PRogram Files" and guess what... IT WORKS!!!

Try This Album!!!!!!

curious if it is possiable to add this to htc album. a major part of album app that is missing from the wm2003 edition of album. can anybody figure a way to add this feature. also i have not been able to find a way to install the old album on a wm6 device...any help on either of these issues would be greatly appriciated. thanks!
UPDATE!-here it is i highly reccomend giving it a try ...trying to get an english translation though! just unzip and place in program files folder! ALL CREDIT TO TWEAKRADJE!!!!!
Update2-once you have album4wm5 installed overwrite with the album exe that i've posted make sure you do not install the camera exe as this will mess up your camera. this update will translate the album to english. now i will try and get some help with the delete/copy/paste issues not working. NOW YOU CAN BROWSE ANY PIC ON YOUR PHONE ZOOM IN AND SET AS TODAY BACKGROUND!!! ONCE AGAIN ALL CREDIT TO TWEAKRADJE!!!!!
The ability to set a background thru htc album doesn't seem to be in there. It's only for showing off what WM can do ... I don't think its supposed to be useful! haha.
My device still has "Pictures and Videos" on it... Doesn't yours? I'm using the TouchIT rom, but I don't know what is in or have been removed from the OpenTouch roms ....
duprade said:
The ability to set a background thru htc album doesn't seem to be in there. It's only for showing off what WM can do ... I don't think its supposed to be useful! haha.
My device still has "Pictures and Videos" on it... Doesn't yours? I'm using the TouchIT rom, but I don't know what is in or have been removed from the OpenTouch roms ....
Click to expand...
Click to collapse
yeah, I have pics and vids with the option i'm talking about....but both pics and vids AND htc album are missing important features that the old album from wm2003 had. pics and vids can't zoom and save as to the today screen. u r just stuck with your picture as is for the today screen. htc album can zoom any pic but you can't save to anywhere. u can use for a contact but still not in the zoomed form. this all sounds kinda picky on my part i'm sure but if u have ever used...or get the chance to use album wm2003 u will see how good a program it is. thanks for your response and keep an eye and ear out for any help on these programs. thanks again!!!!!!
Why don't you try and extract it from a WM2003 ROM? I'll see if I can do that some time this month... maybe.
I've only ever used WM5 and WM6 .. so I don't know what you're talking about haha. But I'm interested in finding out... maybe someone else can extract them since Ivan is going thru a computer crisis at the moment.
ivanmmj said:
Why don't you try and extract it from a WM2003 ROM? I'll see if I can do that some time this month... maybe.
Click to expand...
Click to collapse
i found what seems to be what i am looking for, but i am having trouble getting anything to work. i moved these files to the windows folder. i am really not sure what to do with them. anyone feel like experimenting? i'm linking to the thread and files. check em out please... http://forum.xda-developers.com/showthread.php?t=300880&highlight=album+camera+cab
ivanmmj said:
Why don't you try and extract it from a WM2003 ROM? I'll see if I can do that some time this month... maybe.
Click to expand...
Click to collapse
i found what seems to be what i am looking for, but i am having trouble getting anything to work. i moved these files to the windows folder. i am really not sure what to do with them. anyone feel like experimenting? i'm linking to the thread and files. check em out please... http://forum.xda-developers.com/showthread.php?t=300880&highlight=album+camera+cab
Just copy the CAB in that post over onto your phone via activesync ... then open the file explorer on your phone, find the cab and tap it to run the installation.
Don't install that cab because it overwrites the camera software as well...
duprade said:
Just copy the CAB in that post over onto your phone via activesync ... then open the file explorer on your phone, find the cab and tap it to run the installation.
Click to expand...
Click to collapse
yeah, i have installed many cabs since frequenting this site the past few months. the icon for the album program i want appears in my programs list but when i try to open it i get the red x of death. this program cannot be opened because it is not signed by a trusted blah blah... or one if it's components is missing blah blah...any help???
ivanmmj said:
Don't install that cab because it overwrites the camera software as well...
Click to expand...
Click to collapse
i want the album so bad i figured i would deal with that later. i have installed many cabs since frequenting this site the past few months. the icon for the album program i want appears in my programs list but when i try to open it i get the red x of death. this program cannot be opened because it is not signed by a trusted blah blah... or one if it's components is missing blah blah... the zip has the files seperately . i tried dropping it into the windows folder but that didn't do anything either. have you ever used this album program ivanmmj?
I haven't used it, but I'm interesting in looking through it... I think, (again) that the best solution will be to decompile the ROM and look for all the needed files.
ivanmmj said:
I haven't used it, but I'm interesting in looking through it... I think, (again) that the best solution will be to decompile the ROM and look for all the needed files.
Click to expand...
Click to collapse
yeah, umm... thats a little beyond me.
still have my magician with wm2003se
could you guys possibly tell me what to look for that would need to be extracted? i would probably need to install total commander to investigate the files closer than what i could with file explorer... um...right?? i'm trying to help myself guys haha! oh by the way after installing that cab my camera still worked. but, when i dropped the files from the zip into the windows folder manually it did quit working. i got the files out and all is well. i was just excited momentarily to see the icon for this beloved program of mine in my program list. thanks again try not to forget about me..

TF3D Email Tab Remove Envelope

I have seen a few people remove the envelope so you can read more on the email preview. ITNV sent me 2 manila files and they worked like a charm. I'm using Herg's V6 Flip clock TF3D, so I haven't tested on stock Fuze or other TF3D themes. I would highly suggest you use Total Commander and back up the 2 manila files that are in your windows folder, then copy these to see if they work.
My basic steps, I used total commander, and looked in the windows director and found the 2 manila files and copied them as a backup.
77fb7fad_manila
21449ae5_manila
I went to settings, Today and turned OFF TF3D.
Then I took these 2 manila files that are the same name (and came from ITNV-Thank you) and copied them to the windows directory and clicked overwrite.
I then went back to settings, Today and turned ON TF3D and bam, the envelope is now behind the message, and I can read the a lot more than 2 lines. I've been looking for this for a while, hope it can help you as it has me.
Didn't Upload First Post
Sorry about that, they should be on this post.
cparkhorn said:
Sorry about that, they should be on this post.
Click to expand...
Click to collapse
The envelop was behind, however I only saw two lines of text still. Can post a pic and also did you do anything else beside replacing the files
Sorry
I got these files from ITNV, and he said he was pretty sure this got it done for him, no guarantees. Sorry if this didn't work. All I did was write these files over the files that were in my windows folder.
These are the files I had backed up before making the change. "I am using Herg Flip Clock V6" Not sure if the theme or TF3D you are using might make a difference.
Thanks. Great find. Here's a cab that I tested and it works for me. You still have to follow the directions and TURN OFF TF3D BEFORE INSTALLING and I still advise saving a copy of the manila files before installing. I have attached a cab as well as a photo to show what it looks like once installed. I did experience a lock when turning TF3D back on that required a soft reset and then turning TF3D back on but there were no other performance issues once restarted. These cabs do nothing more than add the files cparkhorn provided. There is a cab to remove the envelope and another one to add the envelope back. Thanks again
Edit: Seems to be working so I posted something on it here: http://www.fuzemobility.com/?p=1828
Thanks again
Worked as stated, thanks for the cab btw it made the process that much easier
Thanks for testing - those guys did the hard work of figuring it out...I just made a cab of their work
bugsykoosh said:
Thanks. Great find. Here's a cab that I tested and it works for me. You still have to follow the directions and TURN OFF TF3D BEFORE INSTALLING and I still advise saving a copy of the manila files before installing. I have attached a cab as well as a photo to show what it looks like once installed. I did experience a lock when turning TF3D back on that required a soft reset and then turning TF3D back on but there were no other performance issues once restarted. These cabs do nothing more than add the files cparkhorn provided. There is a cab to remove the envelope and another one to add the envelope back. Thanks again
Click to expand...
Click to collapse
This works Great! Thanks alot
bugsykoosh said:
Thanks. Great find. Here's a cab that I tested and it works for me. You still have to follow the directions and TURN OFF TF3D BEFORE INSTALLING and I still advise saving a copy of the manila files before installing. I have attached a cab as well as a photo to show what it looks like once installed. I did experience a lock when turning TF3D back on that required a soft reset and then turning TF3D back on but there were no other performance issues once restarted. These cabs do nothing more than add the files cparkhorn provided. There is a cab to remove the envelope and another one to add the envelope back. Thanks again
Click to expand...
Click to collapse
I saw your screen shot and I use the cab but I still only see 2 lines and at the part where I can get the body it says "click to view the message". I wish I knew why I can't get it to work for me.
Works nice on Blackstone !
Elodie said:
Works nice on Blackstone !
Click to expand...
Click to collapse
Oh no...that means I have to try this on my wifes phone
bugsykoosh said:
Oh no...that means I have to try this on my wifes phone
Click to expand...
Click to collapse
first....pray.
second...have yr things nicely packed close to the door, just in case..
Works great on Sprint Diamond! Great work as always!
KukurikU said:
first....pray.
second...have yr things nicely packed close to the door, just in case..
Click to expand...
Click to collapse
She won't let me install a registry editor on it (yet) which is literally killing me [I just want to see what's there]. I'll have to install it when she's showering or something and just remove the shortcut from the programs list so she'll never know
Thanks!! Works like a charm on my Rogers Diamond
man I really love this site. Best ever
lpsi2000 said:
I saw your screen shot and I use the cab but I still only see 2 lines and at the part where I can get the body it says "click to view the message". I wish I knew why I can't get it to work for me.
Click to expand...
Click to collapse
Same here on my Sprint Touch Diamond.
robotphood said:
Same here on my Sprint Touch Diamond.
Click to expand...
Click to collapse
you must have a different version of TF3D (or at least different manilla files in play). Did you confirm that you do in fact have these two manila files on your Diamond? I want to make sure it was overwriting a file and not just adding one new one and over writing one...
Thanx, this works fine with ROMeOS from monx 1.704 Ger Version...
Greetz
Boris
Issue Please see Screen Shot
bugsykoosh said:
you must have a different version of TF3D (or at least different manilla files in play). Did you confirm that you do in fact have these two manila files on your Diamond? I want to make sure it was overwriting a file and not just adding one new one and over writing one...
Click to expand...
Click to collapse
Hi
I have unzipped the files and pasted in Windows foler and then run the file but still the same issue : I have attach the screen shot : any help please
regards
mafaquem said:
Hi
I have unzipped the files and pasted in Windows foler and then run the file but still the same issue : I have attach the screen shot : any help please
regards
Click to expand...
Click to collapse
I am glad to see I am not the only with this issue.

TF3D Program Tab Mystery!

I went to the program tab on TF3D and noticed that an extra row of blank spaces appeared out of nowhere. I didnt think it was that bad since I get an extra row. Unfortunately when I try add a new program, it stays blank and another row of blank icons appear! Anyone know how to get rid of this?
You can manage the icons/programs in the program tab with a freeware utility called "diamond TF3D Config" (you will find it here by using the search)
Greetz
Boris
I know all about TF3d config. Im having problems with the amount of rows present in my programs tab. I cant use them and I cant remove them. I havent installed any programs lately and IDK wth I need to do to get rid of them. So far I have 12 rows of unusable [+] icons. TF3d Config does not manage this.
I have the same problem!!!
I now have an extra page (3x3 icons) of "add program" icons.
In tf3d config it shows the programs I wanted to add, which appear as add program.
And if I try to delete them the add icons still stay....
Does anyone know a solution?
Thanks
ditto... I randomly got the same problem about 2 days ago shorty after I installed the diamond config I think. I also installed the footprints cab and navipanel as well... and recently installed facebook chat and wfacebook.
maybe one of these new installs caused the issue?
Aaron McCarthy said:
ditto... I randomly got the same problem about 2 days ago shorty after I installed the diamond config I think. I also installed the footprints cab and navipanel as well... and recently installed facebook chat and wfacebook.
maybe one of these new installs caused the issue?
Click to expand...
Click to collapse
Had the same problem too guys, it has nothing to do with the footprints cab or facebook chat, all you need to do are some very simple registry edits. I saw the solution a while back in this forum. Can't remember any more what the title of the thread was, but it solved my problem. Will try to find it and get back to you.
EDIT: Found it! Here you go: (credit goes to Rabangus)
Open the registry editor and go to:
HKLM\Software\HTC\Manila\ProgramLauncher
In there you should only have keys 0-17. Just delete any additional key you find there (i.e. key 18 and above), do a soft-reset and you're done
Hope this helps...
Peter
thnks this solved the problem.
yeah this happened to me a while ago and that solution worked
That's great and all but WHY did it happen in the first place?
Thats part of the mystery.
maybe u have installed xbodmod manilla HD and then u have unistalled.. that should give u some new entries in program tab..
hmota78 said:
Had the same problem too guys, it has nothing to do with the footprints cab or facebook chat, all you need to do are some very simple registry edits. I saw the solution a while back in this forum. Can't remember any more what the title of the thread was, but it solved my problem. Will try to find it and get back to you.
EDIT: Found it! Here you go: (credit goes to Rabangus)
Open the registry editor and go to:
HKLM\Software\HTC\Manila\ProgramLauncher
In there you should only have keys 0-17. Just delete any additional key you find there (i.e. key 18 and above), do a soft-reset and you're done
Hope this helps...
Peter
Click to expand...
Click to collapse
Excellent post, this one had me confused as well but your solution took care of that.
Is there any way to make these extra buttons functional instead of deleting them?
I have the same problem - extra row of icons that I cannot assign to programs...
It happened to me just after I clicked on the FM Radio icon, I had just installed the TP2 icons which installed that icon but since my phone did not have an FM Radio it gave me a really weird error and that's when the icons showed up.

I want fewer program tabs/icons? Possible?

I don't need all 18 icons in the programs tab and was wondering if there was a way to remove some of them. Im really trying to simplify the layout of the phone and would like to have only 2 or 3 if possible. Advice or help?
bump for some help
A C
Try Advance Configuration tool
You could edit your registry. First you have to go to the key [HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher]. There you can delete all numbers exept 0, 1 and 2. It will look like in the picture that I've attached. You could backup the registry key before deleting all the icons you don't want to have.
Try.....http://forum.xda-developers.com/showthread.php?t=405749
d12bn said:
Try Advance Configuration tool
Click to expand...
Click to collapse
With Advance Configuration Tool the program tab can't be edited/changed.
band27 said:
Try.....http://forum.xda-developers.com/showthread.php?t=405749
Click to expand...
Click to collapse
With TF3D Config you can edit the program tab but it's totaly unnecessary doing it this way cause this also can be done at the program tab when clicking the remove softkey there. And at the end I guess both programs won't help yesteryear because you will still have 18 icons on the program tab and he only wants 2 or 3 icons. Only way to accomplish what he wants is the registry tweak I suggested.
Thanks for the replies Registry edit it is. Hope I'll be ok doing this. I have flashed new roms already so this should be fairly easy....I hope
Easier than I thought. I used CeRegistry Editor. Really nice to work from my desktop. Again, thanks
yesteryear said:
Easier than I thought. I used CeRegistry Editor. Really nice to work from my desktop. Again, thanks
Click to expand...
Click to collapse
You're welcome. CeRegEditor is nice to work with.
Sure did work. Just a note for those who are thinking about doing this as well... I tried to use the 3, 4, 5 shortcut tabs only , meaning the middle row of shortcuts and it froze up Touchflo 3d. Couldn't load it properly I guess. For some reason the startup wants to see at least one icon in the first row. Does that make sense. By the way Im using
check out TF3D Config.. does it all..
Sage said:
check out TF3D Config.. does it all..
Click to expand...
Click to collapse
You only can hide the programs tab with TF3D Config. That's not what he wanted. He wanted less program icons on the programs tab.

Categories

Resources