No HTC Home settings tab after official 6.1 upgrade - Tilt, TyTN II, MDA Vario III General

Hi,
After upgrading my phone to the official 6.1 ROM, I no longer have the HTC home tab under Settings -> Today. I do have the plug-in enabled under 'Items', but am unable to configure anything.
Any ideas?
Thanks.
(searched quite a bit, but could find nothing related)

Kosem said:
Hi,
After upgrading my phone to the official 6.1 ROM, I no longer have the HTC home tab under Settings -> Today. I do have the plug-in enabled under 'Items', but am unable to configure anything.
Any ideas?
Thanks.
(searched quite a bit, but could find nothing related)
Click to expand...
Click to collapse
I have no problems with mine!
Did u flash from the OEM WM6 or a cooked ROM? If you were using a cooked ROM , see if changing back to your OEM SPL will assist.
I suggest u Hard reset and if that still does'nt work reflash with a freshly downloaded OEM ROM.
I have had no problems with my HTC WM 6.1 ROM at all.
The touch screen seems less responsive though.

I have noticed lags in 6.1 both using the on screen and the hardware keyboard. But that's actually nothing compared to an annoying "press OK to continue loading the contents of this page" and some other PIE-based troubles.

Kosem said:
Hi,
After upgrading my phone to the official 6.1 ROM, I no longer have the HTC home tab under Settings -> Today. I do have the plug-in enabled under 'Items', but am unable to configure anything.
Any ideas?
Thanks.
(searched quite a bit, but could find nothing related)
Click to expand...
Click to collapse
That settings tab is a feature of some cooked ROMs. Since you're using the official ROM, you won't see it.

HTC Home version 2.1.1005.722 has the settings/personal/today tab. Good luck finding it as a cab.

fb401 said:
That settings tab is a feature of some cooked ROMs. Since you're using the official ROM, you won't see it.
Click to expand...
Click to collapse
I am not using a cooked ROM. I'm using the official HTC downloadable update for the Kaiser, and I can enable the HTC Home under Settings/Today/Items . It doesn't have (doesn't need) any options. I also see the HTCHomeplug (quite useless, but works if I turn it on). I also have HTC Plus! , much better than the HTChomeplug, don't remember where I downloaded it from, worked on 6.0 and works perfectly under 6.1.

I'm using dutty's April 29th rom and i also dont have the settings, i dont want the weather icon.

There are third-party utilities that let you customize the HTC home. I have used one called HHC, very nice.

I have HTC Home Customizer but it makes my HTC home buttons look older. Currently i have the "bubble" looking onces, they are more transparent and round, if i use HHC it makes it go back to the old blocky buttons.

Kosem said:
Hi,
After upgrading my phone to the official 6.1 ROM, I no longer have the HTC home tab under Settings -> Today. I do have the plug-in enabled under 'Items', but am unable to configure anything.
Any ideas?
Thanks.
(searched quite a bit, but could find nothing related)
Click to expand...
Click to collapse
Just install this http://rapidshare.com/files/70344158/HTC.Home.v2.1.1005.722.Directory.Fix.Only.schen.cab.zip
And you'll have HTC Home tab in Today settings.

Thanks all; Karolis, that worked for me.
Pity it did not solve the real issue - iGO8 not working with HTC home running.
I was hoping disabling the weather/music tabs would help - but no such luck.

I the solution for the annoying "press ok to continue" problem. Using a registry editor, navigate to HKLM\Software\Microsoft\Internet Explorer\Main and make sure BlockStaticActiveX is set to zero.

Related

Wizard with WM6 How do I get the HTC Plugin to Work?

I have searched the forums until my eyes bleed, I have downloaded and downloaded but still it does not work.
Does anyone have HTC Home Plugin cab files for the following?
MDA Vario/Wizard running WM6
I have managed to get the HTC Home Plug-in to appear in the Today Options screen and I have installed the HTC HomePlug-in customizer and run it but still nothing appears on my Today screen.
If anyone has managed to get the HTC Home Plug-in running on a Wizard with WM6 then please point me at the files I need.
Many thanks in advance.
Mick
try this one
http://rapidshare.com/files/36863085/HTC_Touch_Home_Plugin.cab
file not found...plz look into it
Yep, duff link. Could you please send me another link to the pulgin and a compatible HTC Plugin customizer. (Could you post the file here please, at work and Rapid Share is blocked)
Many thanks for your help
Mick (St.Helens, Merseyside)
I am not sure but I remember I picked up somewhere here that the home plugin does not work properly if installed as cab rather than included in the ROM.
You may check it.
Cheers!
Huckleberry88 said:
I am not sure but I remember I picked up somewhere here that the home plugin does not work properly if installed as cab rather than included in the ROM.
You may check it.
Cheers!
Click to expand...
Click to collapse
I have, that's why I am posting here. The question is still vaild,
'If anyone has managed to get the HTC Home Plug-in running on a Wizard with WM6 then please point me at the files I need.
Many thanks in advance.
Mick
Hi,
if i right know, give's 2 versions: light witout HTC-programs and a professional version within HTC-programs. (so i found this 2 versions for german WM6)
May be, that you need the WM6 professional version with integrated HTC-tool-programs.
Frank
Hello
I reverted to WM5 by using this ROM:
http://forum.xda-developers.com/showthread.php?t=345205
Works great. Thanks for your help everybody.
Mick
Just use the HTC Home that is version 1.5, it works on WM5 and WM6. I installed it on my device using the cab, and modded it no prob. I run the Jag rom and have no issues. HTC Home above 1.5 don't always play nice unless they are cooked into the rom.
HTC Home v1.5
where can i get it for download?
greetings Frank
v1.5 also not works/displayed
i have found it and install the HTC home v1.5 on my device.
But it's also not work: clear scren, were the HTC home-screen should be to displayed...
i capitulate...
HTC Home for Wizard
Here try this one and make sure you uninstall any other version you have and have soft reset before installing
I also tried to attach the Home customiser but it kept failing so i have uploaded it to rapidshare
http://rapidshare.com/files/86916021/HHCv08b_1_.cab
it's work!
scousemartin, great thanks!
The HTC Home plugin now works! I be so happy...
What was my error by all the other versions and installations?
I think it's was partially not compatible to WM5 or the installations was incompletely. So i install in the last an older configurator...
I don't know, what was the error...
Gives ther some tips for setting other funktions for the icons, so i can to determine all open programs by one klick in the HTC Home Plugin?
over again great thanks to scousemartin!
PS:
one other question above HTC Home plugin:
In the top on left the screen shows the provider-network. So by me it's Vodafone.de.
If i power up my device (i'm at home), so it's show shortly "vodafone.de" and than for under one second "home" and than again permanently "vodafone.de".
I think, if i be in my homezone "vodafone at home" the HTC home-plugin is shortly signaled "home" by power up the device. If it right, that the HTC home-Plugin can show the "home-zone", so is the signalisation to short.
Give's ther an trick to show the Signalisation of "home-zone" permanently or that the plugin can showes it by permanently switch the displaying between Network-provider and signaled "home" or a other way to display the homezone if i be in my homezone?
Thanks for inside informations!
Frank
That was the only one i could get to work for the wizard to,glad you are happy, as for a task manager ,to show you all running programs, just add it to the program tab of htc home and then you can just click it to show up all running programs, or install Battstatus, that has a task manager built into it ,or use x-button
"home" signalisation included?
Thanks, i will test the programs or plugins for end all open programs by on click in the next time.
but... what is with the signalisation "home"? It is right, that HTC home can display the homezone (only very shortly) or it is a false interpretation, that is was short displayed "home" by power on the device (if i be in my homezone)?
Gives there an option, that it can displayed a longer time as under one second?
additionaly:
Oh, "home" was not by each swith-on displayed! Is my device longer time switched off (standby), than showes "home", if i switch from on to off and afresh on (also from the second switch-on).
Frank
Edit: I posted in the wrong section. my mistake.
Can v1.5 be installed if v1.0 is in the ROM?
This looks interesting. I'm running Octaivoi v6 which has a built-in HTC Home. I assume it's v1 although I don't really know.
Do you think there is a way to switch to v1.5? There is no way to uninstall the HTC Home from the ROM, of course...
Many thanks, man!
scousemartin said:
Here try this one and make sure you uninstall any other version you have and have soft reset before installing
I also tried to attach the Home customiser but it kept failing so i have uploaded it to rapidshare
http://rapidshare.com/files/86916021/HHCv08b_1_.cab
Click to expand...
Click to collapse
lkmda said:
Do you think there is a way to switch to v1.5? There is no way to uninstall the HTC Home from the ROM, of course...
Click to expand...
Click to collapse
a experiment:
go into the registry: HKLM-SOFTWARE-HTC and delete the entry HTCHome. Make sure, that you have make a registry-backup, before you delete the entry.
Make a softreset.
If now the HTCHome-display not shows, look to start-settings-home-elements whether there still the entry "HTC Home".
If not, so test the setup of HTCHome 1.5, if the setup can now overwrite the older files or if it got an error-message.
May be, that you must have the extracted files and copy it manualy.
How i said: It's an experiment! May be that it works, may be, that it not works...
If the newer files not can be to copying, than restore the registry, so that the older HTCHome-Plugin again can works.
Frank

Noticed Something with the Video/Graphics Driver Issue

For those of you that are running the original HTC WWE rom (1.56.405.5, radio 1.27.12.11), and have the 'HTC Home' on the today screen (i.e. the big clock with weather, favorites etc.) if you click on the "Launcher" tab, then click on the "Programs" button (if you have it saved), you will see the best and fastest scrolling you ever saw in your life while in the Programs area. But if you exit the Programs area to go back to the main screen, then click on the "start" tab, then go to "Programs", everything is slow and laggy again when scrolling.
I hope I explained this correctly. Maybe some genius out there can use this information to figure out why the scrolling is excellent when going into the Programs area using the "Launcher" on the HTC Home, and use it to develop something??
P.S. I only say the original HTC rom because that is what I am using and I don't know if others are experiencing this as well.
Very, Very nice find.
I can confirm this to work for:
- Dutty's WM6.1 BUILD 5.219716
- Radio 1.64.06.04 - 25.70.40.02H
yeah your right. also works for me with original rom. indeed a nice find.
I also thought it had something to do with video drivers initially, but unfortunately, it's just a different program which is launched from HTC Home.
http://forum.xda-developers.com/showthread.php?t=376351
http://forum.xda-developers.com/showthread.php?t=371608
http://forum.xda-developers.com/showthread.php?t=353861
http://forum.xda-developers.com/showthread.php?t=347268

UltimateLaunch stability issues

is anyoen else having issues with ultimatelaunch? i ahve to constantly soft reset. is it because i have a trial version as opposed to the paid for version?
closet410 said:
is anyoen else having issues with ultimatelaunch? i ahve to constantly soft reset. is it because i have a trial version as opposed to the paid for version?
Click to expand...
Click to collapse
I've been running Ultimatelaunch for about a month (unregistered) with no stability issues.
Try searching here. They have answered a lot of questions. If you don't find it then post. They are pretty good about getting you an answer.
no issue for me I use it with SPB mobile shell , pocket plus, pocket weather, rltoday
Do not put today plugins inside UL and on the today screen at the same time .... that causes me problems
starfish_001 said:
no issue for me I use it with SPB mobile shell , pocket plus, pocket weather, rltoday
Do not put today plugins inside UL and on the today screen at the same time .... that causes me problems
Click to expand...
Click to collapse
thanks! that is what i've been doing. so what do you do? i want teh htc home plugin to start up and incorporated in ultimatelaunch
Yeah, make sure all today plugins that you want INSIDE the Ultimate Launch are UNCHECKED to be on your Today Screen.
met3ora said:
Yeah, make sure all today plugins that you want INSIDE the Ultimate Launch are UNCHECKED to be on your Today Screen.
Click to expand...
Click to collapse
I am using PhoneAlarm on the Today Screen and the following inside of Ultimate Launch
Weather Panel
Battery Status
Today Agenda
Seems to work with one exception.
If I go to Mail, open the keyboard (Rotate Screen) then go to the today screen and close the keyboard, INSTANT LOCKUP. If I stay in mail, and go back to the closed position, I am fine.... Otherwise seems to be working.
i have been having problems too... since i installed UL my user interface has been extremely lagging. and i have tried all kinds of ways to get it working perfectly like how everyone says it works.
a lot of people says it works perfectly with out anything, but wheni have it installed it laggs up unbelievably...
i even have to put a back up until the latest time in order to get everything working.
hi,
i´m using ul for 2 month now and everything works fine! i use todayagenda and htc home inside ul and the wireless today plugin above and my mailprogram (tobit david) among ul.
cu
pomfiedel said:
hi,
wireless today plugin
cu
Click to expand...
Click to collapse
What program is this? Is this for WIFI?
i was forced to remove it and back up at the same time. i am very hesitant at trying it again.
but just a question, where did you guys install it in, device or storage card?
ChInEsE ChIcKeN said:
i was forced to remove it and back up at the same time. i am very hesitant at trying it again.
but just a question, where did you guys install it in, device or storage card?
Click to expand...
Click to collapse
To device memory of course!
Never install Today Plugins to your Storage Card, that can cause problems!
Hi there guys,
been searching if anybody had the following problem, then i stumbled on this thread, where somebody might be able to help me.
I had a qtek 9100 before with ultimatelaunch, with today plugins in ultimatelaunch. This worked perfectly, nothing wrong.
Recently, i purchased a Kaiser (to be precise, a T-mobile MDA Vario 3), on which i tried to run Ultimatelaunch. Everything works fine, except after i launched an application & go back to the today screen. When i run tomtom for example, and i go back to the today screen, the ultimatelaunch part is not automatically refreshed. If i just press in the area once, its redrawn. Does anybody have the same issue, or even better, a suggestion on how to solve it?
thnx in advance,
greetings hawkeye
out of curiosity what did you guys put in your UL, app wise?
My system backs up nightly and I soft reset after every backup. I believe this eliminates many issues with my system.
After 3 weeks of testing, I do not have lockups with this combination.
Icons: XP
Registration: Demo
Main Tab:
Device lock
Messaging plug In
Clock
Today
Tab 2:
Outlook / Word / Excel / PPoint
Contacts / Calendar / Checklist / Notes
Olivetree bible / Notepad (similar to desktop Notepad)
Tab 3:
Weather / Microsoft Live Search/ Garmin
Weather To Go
Tab 4:
PIE link to XM Radio
PIE link to Shoutcast
WMP
MobiTV
MobiReader
TCPMP
Photos
Camera
Playslist Manager
Voice Recorder
Adobe Reader
Paint
Tab 5
Outlook
PIE link to Google Reader
PIE
Skype
Comm Manager
Remote Desktop
Tab 6:
Total Commander
Ultimate Launch config
Calculator
File Explorer
SBP Backup
Activesynch
HTC Home Plug (9 Icon)
What program is this? Is this for WIFI?
Click to expand...
Click to collapse
this is a today plugin which is activated by the kaiser tweak and it shows if wifi and bt is dis-/enabled.
to switch wifi on, i have a button in ul.
cu
does anyone find that activating the htc home screen on start up cause problems? or better yet does anyone have any tabs that they activate on start up?
also having problems when using home customizer. it seems to freeze ultimatelaunch for some reason
HTC Home works fine for me.
All my tabs (just three), have activate on startup enabled.
Tab1
PocketBreeze
Tab2
PocketPlus
Tab3
HTC Home (only weather tab is shown)
closet410 said:
also having problems when using home customizer. it seems to freeze ultimatelaunch for some reason
Click to expand...
Click to collapse
Problem is that HHC check if HTC Home Plugin is enabled at startup.
Because it thinks it's not, it starts HHC. After making changes, it will try to copy changed file's to HTC Home directory. Because HTC Home is loaded into Ultimate Launch that will fail, and make Ultimate Launch crash!
Best for you to do is, disable Ultimate Launch on your today screen, start HHC and make changes to plugin, then after applying re-enable Ultimate Launch. (Uncheck HTC Home, it's auto enabled trough HHC.)
That should work for you.
johanromijn said:
Best for you to do is, disable Ultimate Launch on your today screen, start HHC and make changes to plugin, then after applying re-enable Ultimate Launch. (Uncheck HTC Home, it's auto enabled trough HHC.)
That should work for you.
Click to expand...
Click to collapse
When I was testing HTC Home with UL, that's the same thing I did.

WINDOWS MOBILE 6.5 21193/21193 update 25.3.2009

XIP 31193
SYS 31193
hello im working on new version and now it is stable and working
here is link
all buttons working (red button .......)
http://www.sendspace.com/file/8ger2y
and here is video of rom
http://www.youtube.com/watch?v=ozY9aKAMy58
scroll down for screenshots
My observations:
+ damn fast
- red/power button doesn't wors as power-down button and phone toggle
- no wireless/comm manager
- some bitmaps doesn't look very well (not a big problem)
- strange names in Buttons settings
- no palm messaging (but maybe it's jus me)
At the moment I'm going back to 6.1 with palm oems, but I do really cross fingers for you and your rom. If you'll put new version soon, I'm getting it! Great work!
miloszz said:
My observations:
+ damn fast
- red/power button doesn't wors as power-down button and phone toggle
- no wireless/comm manager
- some bitmaps doesn't look very well (not a big problem)
- strange names in Buttons settings
- no palm messaging (but maybe it's jus me)
At the moment I'm going back to 6.1 with palm oems, but I do really cross fingers for you and your rom. If you'll put new version soon, I'm getting it! Great work!
Click to expand...
Click to collapse
thx to u next version will be faster then this (i belive)
i need port original applications form palm wm5 to more usable on this palm
1-2 days for it
i dont like palm messaging
original is better for me
I used default messaging for a long time (so called "lite" version of 6.1)
The biggest problem for me is comm manager and power button. Accidentialy I flashed again to your rom so I'll stick with this one now, try to configure it for my needs (it's just question of few apps to cure most of "problems").
Can't wait to see next version.
Best regards.
veisen said:
thx to u next version will be faster then this (i belive)
i need port original applications form palm wm5 to more usable on this palm
1-2 days for it
i dont like palm messaging
original is better for me
Click to expand...
Click to collapse
I would suggest using the Palm WM6 as a base for those apps, not wm5.
Merlyn_3D said:
I would suggest using the Palm WM6 as a base for those apps, not wm5.
Click to expand...
Click to collapse
5 is better because vodafone version is bigger and slower
miloszz said:
I used default messaging for a long time (so called "lite" version of 6.1)
The biggest problem for me is comm manager and power button. Accidentialy I flashed again to your rom so I'll stick with this one now, try to configure it for my needs (it's just question of few apps to cure most of "problems").
Can't wait to see next version.
Best regards.
Click to expand...
Click to collapse
uploaded version wm6.5 with palm oem programs and commmanager and some small fixes
veisen said:
uploaded version wm6.5 with palm oem programs and commmanager and some small fixes
Click to expand...
Click to collapse
haven't tried the clean version, but on the new palm version, the soft menu is the old version and links like phone settings or today settings dont work. *have to use start menu*
also not able to connect to an exchange server. link to set it up in activesync seems to be dead.
red button, and wireless manager seem to work.
will check out the clean version as well.
edit: reset the phone. activesync, email, and exchange all work.
soft key bar still isn't like your first update *i assume it changed in 6.5, and this is the old version* and phone and today settings links in soft menu are still broken.
edit#2: seems the email account isn't listed in the accounts settings window. also at least one keyboard shortcut didn't work (whitebutton + P for brightness settings) i assume this has to do with the "weird" names programs have listed under buttons.
i want to update to 6.5 but is it possible to go back to orignal at&t oem rom afterward to will there be some problem....???????
help......??????????????
hartleyshc said:
haven't tried the clean version, but on the new palm version, the soft menu is the old version and links like phone settings or today settings dont work. *have to use start menu*
also not able to connect to an exchange server. link to set it up in activesync seems to be dead.
red button, and wireless manager seem to work.
will check out the clean version as well.
edit: reset the phone. activesync, email, and exchange all work.
soft key bar still isn't like your first update *i assume it changed in 6.5, and this is the old version* and phone and today settings links in soft menu are still broken.
edit#2: seems the email account isn't listed in the accounts settings window. also at least one keyboard shortcut didn't work (whitebutton + P for brightness settings) i assume this has to do with the "weird" names programs have listed under buttons.
Click to expand...
Click to collapse
thx for test i repair it today
Just downloaded your rom, will let you know the details soon
Ok here is the review of this rom, the one with palm oem applications and commmanager,
Pros:
Fast and stable
Volume is better compare to 6.1
It has inbuilt mass storage driver which 6.1 lack
Shortcut are sorted in appropriate folders in start menu
Black Theme is default, which is very good
Display is better compare to 6.1
There are 2 flavour of Wmplayer
Comm Manager is now full functional
And More............
Cons:
Instead of green light to show the network now its showing orange,
Vibrate is not working
There is slight jerk in display while changing screen from one program to another
There is no Call screen, Mean when you are answering a call or had dialed a call you want be able to see the duration of the call.
Hi there, thank you very much for your great work. I have a quick question: My Treo has a German (QWERTZ) keyboard, will it be detected somehow?, or the ROM will asume its a QWERTY keyboard. I don't mind the OS being in English, that would even be better, is there a quick way to patch the ROM to make it work with the QWERTZ keyboard?
Thank you so much in advance.
About in call screen. It's all around ActiveCall and DialLookup plugins. Maybe changing some registry values will fix it (I had similar situations once and editing some registry solved my problems). Tomorrow I'll compare some of my keyes with working wm6.
-If your syncing to an Exchange server, the Manage Folders function does not work to be able to select addition folders.
-blank HTCSETTINGS icon under System.. appears to do nothing
- 2 PHONE apps under Personal settings. Different functions, but named the same
- There is something off with trying to go into Messages from the Today screen. Takes a few clicks to actually make it work. It doesn't do it everytime.
That's all I found for the moment.. obviously WLAN option does nothing on mine
I've noticed one more thing: there's no "white dot" indicating text input with active function key. It's a bit tricky when you try to type password and you don't see what you write...
But in general it works very well. But installing "hidelogo" caused reset loop and I had to hard-reset.
Great work!
EDIT:
Change HKLM/Software/Microsoft/Today/Items/"Dial Lookup"/Type from 4 to 6 <- it will fix active-call-screen-problem Works for me.
i build new version today with all palm applications and battery test show me 14days
it is quickly then last version i upload it soon
it need some small fixes
UPLOADED 1st link
miloszz said:
I've noticed one more thing: there's no "white dot" indicating text input with active function key. It's a bit tricky when you try to type password and you don't see what you write...
But in general it works very well. But installing "hidelogo" caused reset loop and I had to hard-reset.
Great work!
EDIT:
Change HKLM/Software/Microsoft/Today/Items/"Dial Lookup"/Type from 4 to 6 <- it will fix active-call-screen-problem Works for me.
Click to expand...
Click to collapse
white dot not working on 6.5 i must copy some from 6.1 to make it works
czech version
To Veisen:
Will you make the czech WM 6.5 clear version?
Can you describe differencies between clear and palm version and between 6.1 and 6.5 version?
Thanks.
endymion said:
To Veisen:
Will you make the czech WM 6.5 clear version?
Can you describe differencies between clear and palm version and between 6.1 and 6.5 version?
Thanks.
Click to expand...
Click to collapse
clear is without palm applications and wm6.5 is fastest and stable
czech localization on wm6.5 i make soon
i can make other localized roms as deu ita spa pol .........
1st all try this english
i make localization on bug free version of 6.5

Iconsoft PhonEX 2.x - Disable WM Phone

Hi everyone,
Looked for a solution for this around the web, found nothing, perhaps someone here knows:
The new Iconsoft PhonEX 2 version has a new option in the main settings window. It's called "Disable WM Phone (for better perform.)
I'm using the latest NATF WM6.5 ROM and for some reason, this option is grayed out for me. The weird thing is that it has worked a few days ago. I've reflashed a couple of days ago and it's grayed out ever since.
I'm having terrible performance issues with the PhonEX, even though everything else on my Touch Pro works perfectly since upgrading to WM6.5. I think enabling this option should solve the issue, but I need to find out why it's grayed out...
Thank you!
alonroz said:
Hi everyone,
Looked for a solution for this around the web, found nothing, perhaps someone here knows:
The new Iconsoft PhonEX 2 version has a new option in the main settings window. It's called "Disable WM Phone (for better perform.)
I'm using the latest NATF WM6.5 ROM and for some reason, this option is grayed out for me. The weird thing is that it has worked a few days ago. I've reflashed a couple of days ago and it's grayed out ever since.
I'm having terrible performance issues with the PhonEX, even though everything else on my Touch Pro works perfectly since upgrading to WM6.5. I think enabling this option should solve the issue, but I need to find out why it's grayed out...
Thank you!
Click to expand...
Click to collapse
i belive u have to disable the tachi dialer (not sure if NATF ROM is using it) try the tachi dialer disable cab and see if it works than
Thanks a lot, that solved it!
If anyone needs the disabler, it's here at the bottom post:
http://forum.xda-developers.com/showthread.php?t=531175
phonex
iin phonex have you looked at option and then click on the lower taskbar to see if its been ticked ie disable wm phone ! if it is then it would be greyed out !!!!
my issue is when this options is on my bluetooth icon disapears!!!

Categories

Resources