Database Develop

tilt - power button issues

This just started happening:
I restart my tilt. I push the power button and the display brightness gets brighter but the device does not turn off. I push it again, the device turns off but then I can't get it to turn back on without soft resetting! What the crap??!!
Any clue what is going on?
Thanks!
Alan

I am just a n00b, but it sounds like your power button got mapped to your brightness control somehow, and when the screen goes black, the device is not off, just brightness set to 0. When you soft reset, the unit just sets back to default. I am not proficient in mapping the buttons, but a quick search on the forum should help. I know that there are a lot of threads having to do with mapping keys.

Hi
I experience the same problem and strange enough after I downloaded a patch released by HTC for potential issue with blue tooth and the phone.
A soft reset does not solve the problem, instead a Sync with the PC (even not a full one) cure it for a period of 2-3 days.
I have the impression that it is more complicated than just a registry issue. For instance I can not run the TOM TOM any more.
The HTC support only suggested a hard reset that I did but for complicated reasons I was forced to restore a back up I had.
So I am still affected by this problem.

I did a hard reset and used spb backup to restore everything to the day prior. The last thing I remember installing was s2u2 0.99c which seems that it would mess with how the device responds to the power button. I'm going to post over there and see if there is a chance it was the culprit.
Alan

You have to disable directdraw in s2u2.

persiansown said:
You have to disable directdraw in s2u2.
Click to expand...
Click to collapse
It was and is disabled at least according to s2u2 settings. I did notice that for me in 0.99c DPAD was enabled but did not work.

backlight goes off during call

I have a T-Mob MDA Var 3. When i make a call on battery power the backlight doesn't stay on. annoyingly, the only way to turn it on during a call is to hit the power button.
This seems silly as I might want to place someone on hold or start a conference, etc. I have set the backlight defaults not to turn off on external or battery power.
Does anyone know how how I can stop the backlight turning off during calls?
Thanks

Disable fast sleep and sleep ...
Use KaiserTweak below:
http://forum.xda-developers.com/showthread.php?t=333898

Thanks for the quick reply - i will try that!

Not another lazy noob....
I've tried Kaiser Tweak, and verified the registry settings. I've used google, the XDA Forum and the XDA Wiki. Still, my backlight/call end problem persists. My ROM is the most current version.
Can anyone help? I really like the Kaiser, but this problem makes it all but unusable.
Thanks,
brianb

bigdaddyb said:
I've tried Kaiser Tweak, and verified the registry settings. I've used google, the XDA Forum and the XDA Wiki. Still, my backlight/call end problem persists. My ROM is the most current version.
Can anyone help? I really like the Kaiser, but this problem makes it all but unusable.
Thanks,
brianb
Click to expand...
Click to collapse
did you soft reset?

Yes....I've run Tweak and soft reset numerous times.
Thanks for checking. I'm not sure I haven't missed something.
brianb

Mine does this. very anoying especially when calling voicemail or an automated call system where you have to press keypad numbers. Have to keep turning the phone on to press the keypad.

Backlight problem

My screen will be darker after 10 sec.
I can set this again to 5 min. and after a few on and offs it will be back at 10 sec.
This is very annoying!
I thought i had found the problem, but it wasn't.
HKCU/ControlPanel/Backlight/BatteryTimeout setting up to 300. This is 5 minutes. It counts in seconds. But this isn't working.
Please can anyone help me?? A lot more have this problem.

I have the same problem, anyone the solution?

same problem here. I have call the helpdesk of htc they told me to do a hard reset. But it doesn't work for me. They also told me to return the phone when the problem stays afther a hard reset

vipinholland said:
same problem here. I have call the helpdesk of htc they told me to do a hard reset. But it doesn't work for me. They also told me to return the phone when the problem stays after a hard reset
Click to expand...
Click to collapse
i had the same "problem" and indeed, after a hard reset the backlight stays on 2 minutes as my heart wishes. i also use the the option to "auto adjust backlight. i have to admit it is strange...i don't see the connection.

KukurikU said:
i had the same "problem" and indeed, after a hard reset the backlight stays on 2 minutes as my heart wishes. i also use the the option to "auto adjust backlight. i have to admit it is strange...i don't see the connection.
Click to expand...
Click to collapse
yes, my backlight stay's also on for 1 minute(my setting)...hope the sound problem is also gone..

It is a bug in keypad locking
I think the backlight problem only occurs if you are using the keylock feature by pressing the end call button for a couple of seconds.
You can try it out yourself:
1) set your backlight settings to whatever you want and verify it works as intended.
2) Now just normally switch of your phone (not locking the keypad) by pressing the power button, switch back on and verify that the setting is still correct.
3) Then do a soft reset and again verify that the setting is correct.
4) Now lock the keypad by using the end call button (press a couple of seconds until locked).
5) Now unlock the phone and check the backlight settings: they are put back on the default values!! I guess it is a bug in the keypad lock functionality.
Btw, step 2) and 3) are just for verification, you may skip these to reproduce the bug.

Actually, if you use the lock feature of the device (for instance by enabling AutoDeviceLock in the registry, see tweak 18 in the stickied Diamond tweaks thread) the settings are also reset to the default values.
Is this the case for everybody? Or is it just me that it seems the locking feature contains bugs.

FYI...I had this issue from the start when I was running the Asia HK 1.34 ROM image. I flashed it using HardSPL and put the Europe 1.35 image on the device and have not had the problem since. All backlight values work normally as of now....I recommend this if your device is the HK ROM and you're having the issue. Not sure if it'll work for you, but it worked for me....

The solution is simply
You have to change DWORD LockLevel present in HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel\ to 0 (zero)
And now your time of standby don't change anymore

Locking my Diamond

I have recently had to hard reset my phone (long and boring story).
Since then, I have not been able to get some settings the same and it is frustrating me! I hope someone can help.
What I want is for the backlight on the phone to go dim (but not off) after 10 seconds and I want the phone to switch off after 1 minute. So in the power setting I have set the setting for turn off backlight if device is not used to 10 seconds and the turn off device if not used to 1 minute. All is well. However, I want the device to autolock after 1 minute as well. If I enable autolock in advanced config then the device locks after 10 seconds, not 1 minute!
Where am I going wrong?
Thanks

Try [URL="http://forum.xda-developers.com/showthread.php?t=386451&highlight=turn"]this [/URL]. Or this.

Sergio PC said:
Try [URL="http://forum.xda-developers.com/showthread.php?t=386451&highlight=turn"]this [/URL]. Or this.
Click to expand...
Click to collapse
Thanks. I did try a search, but I find its getting harder to find things now!
What I was wondering was why (or how) I managed to have it working previously and yet not again even though I think I had the same set of settings! That didnt sound right to me...
Interesting program that, will have to investigate. But I am sure it can be done natively with the device - that is how it was for me before my hard reset.

You should have the "Lock" app in Settings. You could use it...or you could install Slide2Unlock (S2U2) to do it as well.

Pls Help: Problem with Power Button

From yesterday onwards i am getting this problem.power button is nt workn as previous.Phone automatically get the signal of long press power button.it means automatically it asks "power will be turned off,and you may lose data if...".and also when i press power button it doesnt goes to standby mode.when i long press the power button sometimes it doesnt switch off..As i think the power button dnt work as normal or may it seems that power button keep pressed internally..pls help me to solve this problem.thnx in advance

some1 pls help me

naheelja said:
some1 pls help me
Click to expand...
Click to collapse
I'd suggest you make a full backup and hard reset the device in order to make sure its not a hardware problem. If it works fine after a hard reset, you'll know its something you installed relatively recently.

I did a hard reset.nothing changed.then i flashed a different ROM.But still i am facing the problem.

Try the following:
Get a can of canned Air and blow it on the button as it might move any debris that are there. Just make sure that the phone is off and the battery is out. KEEP THE AIR STREAM AWAY FROM THE SCREEN! If any of the propellant escapes while you spray, it can freeze the LCD. Just slide it open and stick some paper on top of the screen. Wait a few moments before you switch the device back on
If this doesn't work, flash the Kaiser with its original ROM and SPL just in case there is an odd interaction somewhere. See here: http://forum.xda-developers.com/showthread.php?t=418375
If nothing of the above work, you have two options:
a. If the device is in warranty, return it and get it fixed or replaced. Make sure is has its original ROM/SPL loaded before you do.
b. If the device is out of warranty/you don't care about the warranty, you can try to open it up and see if something is blocking the switch. There are instructions floating around here somewhere.
EDIT: Added warning regarding the propelant and the LCD

Any update here? My tilt is doing the exact same thing

alt236 pretty much said all there was to it. Hard reset, restore stock ROM, try blowing the switch, if all fails send for repair.

Did all of the above and the cost of repair is not worth it. Time to toss my kaiser I guess