When I plug in my headphone adapter to play through external speakers I get no sound... still plays through device. the phone stills charges and syncs fine. Any ideas?
The phone is a Tilt. Just to eliminate the adapter as the culprite I plugged in a 8525 and it played fine.
Any ideas?
I'm having the same problem
bump/
I'm having the same problem now.
It used to work fine.
I'd connect adapter through usb port at bottom of phone and other end is aux-input to car stereo (transfers all sound to car stereo).
Problem now is sound only plays through phone when connected to car stereo.
I've gone through the phone settings multiple times but cannot solve problem.
usb contacts on both ends look good, nothing bent.
Anybody please help?
the same for me...
same..........
@jsd2 & Isch-
Please could you indicate your ROM/radio/SPL?
Tnx!
um idk but it bootloader it says
KAIS1*0
SPL-1.93.0000
CPLD-8
is this what u need?
same here
does anybody find solution to the mentioned problem. is because of a ROM? because its flashed?
Please help
Isch- said:
um idk but it bootloader it says
KAIS1*0
SPL-1.93.0000
CPLD-8
is this what u need?
Click to expand...
Click to collapse
yes, only to compare
vladtrend said:
does anybody find solution to the mentioned problem. is because of a ROM? because its flashed?
Please help
Click to expand...
Click to collapse
I've no idea
vladtrend said:
does anybody find solution to the mentioned problem. is because of a ROM? because its flashed?
Please help
Click to expand...
Click to collapse
What ROM & Radio are you using?
I have the following Ram. ROM hard sPL
R1.71.09.01
25.75.40.02
3.34 Shifu
Hope this can help to solve the issue
Hello everyone,
Happy to see that +2 years after release, the TyTn II is still use by some people
Unfortunately, I have the same problem
For more convenient in use, i bought a bluetooth headset wich works well, but it gives me headache !
So i use wired headset.
But since one month, the system do not recognise the wired headset.
The mini usb plug is well recognized by usb wires for active synch, data transfert, power alimentation.
Here are my Kaiser specs :
KAIS130
1.71.09.01
25.75.40.02
3.29
Mala v1.3 FRA 12-dec-2008
The usb plug seem clean, i use spray duster to make it cleaner it but it was useless.
I thought it was a bad configuration software, so i re install Rom, but it was useless too
As i use a car, i will have to use again my bluethoot headset, which works fine, but i will have to store head pain medicine near me
I will try to downgrade Radio or SPL to see if it makes any change...
Related
Hello all,
I am having problems. I flashed Alex's super clean Multimedia Att Rom onto my Tilt (it works freekin great!). Then I bought the extUSB 3-in-1 Adaptor for HTC TyTN so I can use normal headphones. Now when it is plugged in, it wants to constantly phone the last number dialed when it is plugged into this adapter. It will just randomly decide to dial the last number. Also the sound doesn't seem too loud. Any ideas?
Thanks!
Anybody? I can't possibly be the only one with this problem.
This adapter splits out a standard size headphone jack.
With the adapter in, my phone will just randomly decide to call my last dialed number. Any thoughts at all about what can be causing this
i have one with duttys rom v3 and no problems at all.. sound quality is allways with some background noise, but i think that is normal.
atomikpt said:
i have one with duttys rom v3 and no problems at all.. sound quality is allways with some background noise, but i think that is normal.
Click to expand...
Click to collapse
Thanks for the reply! I am glad to hear that it works with other people. Any ideas as to why mine is doing this? Perhaps something to do with voice dialing?
well I'm having that problem now.......
it really SUCKS!
anyone can help us?!
If you've read the same thread found in the Kaiser accessories forum, you'd see this is a problem with the 3-in-1 adapter on the Kaiser, not just my ROM or Dutty's ROM.
The 2-in-1 adapter works fine for me, as it does for others too.
Thanks Alex!
It was helpfull, however I didn't had this problem with others ROM's like I said up in this post, I was using Dutty's V3 and that didn't happen in any time..
Uninstalling the VoiceCommander can be the solution?!
I think I don't even have it (with dutty v4)..
Sorry for my average english..
Regards.
hi there...I have an ipaq 6515 and I have some problems.
I'll start with the problem of voice. It doesnt play any music or any sound only when someone calls me I just hear them but they can't hear me..
The second problem is with the camera. when I try to take a photo it just block the hp logo. nothing more..
The problem with the camera and the music came when I installed TomTom software.. I don't have idea what it's going one... So if anyone know something, please helpppp!!!!
Thanx in advance....
Sound and Camera Problems
The first thing to try would be to uninstall Tom-Tom and see if it works again. If not, then try a hard reset to see if it will clear the problem. The hard reset will clear out any data so you will need to do a backup of your contacts, calendar, and any other stuff you want to keep. If the hard reset clears the problem then you should start reinstalling you programs one at a time and checking the unit between each install.
Not sure about the camera problem but I had a similar problem with sould after installing TT6. The fix was :
- Connect your 6515 to your PC and start Activesync
- Using your PC search for the following files on your 6515
- BtCoreIf.dll rename to BtCoreIf.dll.old
- BtSdkCE30.dll to BtSdkCE30.dll.old
- Do a soft reset
You should have sound back now.
Hope this helps.
Futki said:
hi there...I have an ipaq 6515 and I have some problems.
I'll start with the problem of voice. It doesnt play any music or any sound only when someone calls me I just hear them but they can't hear me..
The second problem is with the camera. when I try to take a photo it just block the hp logo. nothing more..
The problem with the camera and the music came when I installed TomTom software.. I don't have idea what it's going one... So if anyone know something, please helpppp!!!!
Thanx in advance....
Click to expand...
Click to collapse
I had exactly the same problem with the sound on my 6515. The problem was the speaker itself. I had to use a bluetooth headset until it eventually completely passed away.
As far as your camera issue is concerned. I suggest you hart reset your 6515. That may also fix your sound.
ipaq 6515
a few day ago i started to upgrade the software on my ipaq with the latest rom when my brother pull the plug on my pc during the rom update.
now it don't power up and when ever i connect it to my pc to try the update
i get a error massage.
how do i reload the os?
or is it dead
codywal said:
a few day ago i started to upgrade the software on my ipaq with the latest rom when my brother pull the plug on my pc during the rom update.
now it don't power up and when ever i connect it to my pc to try the update
i get a error massage.
how do i reload the os?
or is it dead
Click to expand...
Click to collapse
It may very well be dead. In fact it probably is. You need to try to put your phone into bootloader mode. You'll have to search the forums to find out how. If you can get it into the bootloader can just plug it in to your comp and update. Don't give up. Try hard to do it and you might just be able to. Good luck and let me know how it goes.
Hi guys,
I am new in this forum and I am an old owner of this device. It seems that some of you have had the same problem with the sound. Sometimes, this problems comes with Tomtom 6 but another times the problem is the device itself. Take care using the 2.5 mm sound jack. If you use it, you can find that after unplugging it, the speaker does not work. In my case, the problem was that this jack uses to get jammed. Solution: to dismantle the pda. Even doing this, you will need a dose of luck because the jack is welded to the main-board, so to unlock it is not something very trivial. I tried with a pin, moving all the mechanisms inside the jack and I did it. This happened two times till today, the first time it was not necessary to dismantle the pda, I tried moving the components of the jack from "its natural" access and I was lucky, the second time I needed to open the device. If you decide to open the device, you will need to free the 5 screws (one is under the warranty seal) of the back side. Then to open it slowly starting with the top. Take care with the vibration engine, it is linked to the back cover and the cables that connect it with the mainboard are very thin.
Hope this will help and sorry for my English !
HI. Thanx for the help, but I already solved the problem with the camera and voice. I upgraded the rom from the hp.com. Now it works fine.
There is something else I would ask. After I upgraded the rom, I had installed the Tomtom navigator.When I connected to the internet it downloaded one free map, which I don't use it. I downloaded the map For Eastern Europe but Tomtom doesn't recognize it. Any help????
First thing: You need to select the map. Open TomTom and change your preferences. There you will find the option.
Second thing: You can not place a map in your MiniSD (at least my 6515 do not looks for a map there, I do not know if this problem is related with my ROM version), you need to place the map in your SD card.
My problem with the sound is due to jack connections. I opened the PDA and noted that the plug for the jack has some wobbly connections, really badly designed and they have become not functional with the constant plugging and unplugging. There are two connections that are supposed to clsoe once the plug is out. i tried bending them a bit and testing with a Tester i showed no continuinty. I have simply but a spot of welding and given up for ever on putting hence a plug inside.
The sound has come back and it works! I hope it lasts
OK, I've used the actual rom image to make this simple flasher. This is cmonex flashing tools, and olipro nbh maker, using the rom provided by taopaipai.
Just unrar, make sure you are hard spl-ed, and run the romupdateutility.exe AS AN ADMIN.
It should flash nicely, an you will get the new rom.
Be carefull: I'm just providing a way to flash the rom, I don't know how to help people in distress, and if you didn't apply HARD SPL from cmonex, it won't work.
I take no responsability, and something goes wrong, I'm sorry for you ;-). It worked for me.
Known bug from the rom: headset doesn't work (if it works, please report). Sound works though.
EDIT: ok I found how to get sound to headset. Just plug the headset in and reset snapvue side. If the high pitch sound appear, just reset it again.
I guess this is the workaround for now. Hoppefully someone find something better. At least you don't have to reboot vista.
Sound on WM side doesn't work
Link is : http://rapidshare.com/files/137092443/ruushiftgps.rar.html
IS sound working for you now?
About to flash tonight, is audio now working for you ? WinMo/Vista
And on the headphone jack in WinMo/Vista ?
Microphone still working in WInMo ?
cheers,
Do I need to liberate it after flashing again..?
It's the same rom. So yes you need to liberate it afterward
lucid said:
About to flash tonight, is audio now working for you ? WinMo/Vista
And on the headphone jack in WinMo/Vista ?
Microphone still working in WInMo ?
cheers,
Click to expand...
Click to collapse
are you actually posting this after reading my post?
EDIT: got some of your answers now. Read first post again
so seems am the kamikaz since no one reported to try it, okay whatever, a small step for a human being and a large leep in bla bla bla whatever armstrong said
okay that was nice, though i vae no idea whats telnav, but i seem to have gps not tested yet
does the headset jack works on vista?
I found the cause of the high pitch sound. This occurs when you start vista while charging the shift. To start it without annoying sound simply unplug the shift then boot vista if you have your headset plugged the sound will only go through the headset and if it's unplugged then you plug it in after you boot up vista it wont work. The sound will only come out of the first device recognized when vista boots. I'll try and find a way to fix this issue. Maybe restoring the shift to factory refaults is the key but we'll see. I'll do a back up when I get home then reformat my shift. I'll keep you guys posted on the results.
Can post other places besides rapidshare and megaupload
Hi,
It a great effort but I have problems trying to download from both rapidshare and megaupload. Please assist by posting other links. Thanks.
anyone here has the original wwe dump... I was too excited i forgot to do a backup of my oem rom
janstan said:
I found the cause of the high pitch sound. This occurs when you start vista while charging the shift. To start it without annoying sound simply unplug the shift then boot vista if you have your headset plugged the sound will only go through the headset and if it's unplugged then you plug it in after you boot up vista it wont work. The sound will only come out of the first device recognized when vista boots. I'll try and find a way to fix this issue. Maybe restoring the shift to factory refaults is the key but we'll see. I'll do a back up when I get home then reformat my shift. I'll keep you guys posted on the results.
Click to expand...
Click to collapse
Do you mean you have sound working on the headset if booting with it? or that you don't have the high pitch sound that way?
If you can get sound through headset, can you tell me how? and what's your radio version?
Thanks
EDIT: ok I found how to get sound to headset. Just plug the headset in and reset snapvue side. If the high pitch sound appear, just reset it again.
I guess this is the workaround for now. Hoppefully someone find something better. At least you don't have to reboot vista.
I think that's the best solution nothing happened even if I reformated vista. It's definitely with the snapview rom.
How about the RADIO ROM ? I gather that the SnapVue ROM we have now, is slightly incompatible with the RADIO ROM that we have now.
Can someone bake a ROM with the CANADION radio version ? WOuld that work for Europe ?
The GPS Inside the Sihift is superb quality. In-House fixes with 6-8 sats !!
Liberate the WM
After installing the new rom I've not bee able anymore to liberate the Snapvue.
The answer is : Installation of SHIFTpack.liberate.cab was unsucessful.
ANy suggests?
Try and "hard reset" your new installation (canada ROM) then try liberating it.
just to share my SDcard drive is working properly, no matter what i do it works perfectly, i would say it might be really after installing all vista updates, shift update dois update and battery optimizing tool, one of those fixed my problem, sound is working through jack but not through speakers, GPS is working okay so all on all everything is great so far
@Rabia
Thanks Rabia, just two questions:
...my SDcard drive is working properly, no matter what i do it works perfectly, i would say it might be really after installing all vista updates, shift update dois update and battery optimizing tool, one of those fixed my problem, .....
Do you mean that you can view your SD card in WM?
...sound is working through jack but not through speakers, GPS is working okay so all on all everything is great so far...
I desume you installed the Canadiam Rom that allows you to reveal the GPS on Snap Vue, how did you stop the audio and allow the jack? Did you youse the taskmgr.exe and in the device tab you just modified the dev wave1?
Thanks
ferrett1968 said:
Thanks Rabia, just two questions:
...my SDcard drive is working properly, no matter what i do it works perfectly, i would say it might be really after installing all vista updates, shift update dois update and battery optimizing tool, one of those fixed my problem, .....
Do you mean that you can view your SD card in WM?
...sound is working through jack but not through speakers, GPS is working okay so all on all everything is great so far...
I desume you installed the Canadiam Rom that allows you to reveal the GPS on Snap Vue, how did you stop the audio and allow the jack? Did you youse the taskmgr.exe and in the device tab you just modified the dev wave1?
Thanks
Click to expand...
Click to collapse
Do you mean that you can view your SD card in WM?
unfortunatly not otherwise i would have opened a new post
I desume you installed the Canadiam Rom that allows you to reveal the GPS on Snap Vue, how did you stop the audio and allow the jack? Did you youse the taskmgr.exe and in the device tab you just modified the dev wave1?
i have both working jack and speaker but not at the same time, if i want speaker side i unpluge the jack and restart WMO side, and if i want the jack i plug it first then restart wmo again and it works
Rabia said:
Do you mean that you can view your SD card in WM?
unfortunatly not otherwise i would have opened a new post
I desume you installed the Canadiam Rom that allows you to reveal the GPS on Snap Vue, how did you stop the audio and allow the jack? Did you youse the taskmgr.exe and in the device tab you just modified the dev wave1?
i have both working jack and speaker but not at the same time, if i want speaker side i unpluge the jack and restart WMO side, and if i want the jack i plug it first then restart wmo again and it works
Click to expand...
Click to collapse
so you don't have the annoing buzz from WMO after uograding to Canadian Rom?
About the SD in WM i posted this:
http://forum.xda-developers.com/showthread.php?t=416899
could it be helpful?
Thanks
All,
I have an AT&T Tilt, which I have had a for a while. It has had various different ROM's on it. Currently running one of Dutty's latest for the Kaiser.
However, the blasted device no longer recognizes headphones (the ones that shipped with it, or either of the adapters I have). It charges fine, it connects via USB just fine, it just ALWAYS plays music and sound over the internal speaker rather than the headphones.
I've even pulled the thing apart, following the instructions on the wiki, and have taken a good hard look at the jack and connectors, everything seems to be fine visually.
Anyone have any ideas?
Thanks much
MVS
Id maybe switch the radio just to be sure as the radio firmware controls audio. Just a shot in the dark
pyraxiate said:
Id maybe switch the radio just to be sure as the radio firmware controls audio. Just a shot in the dark
Click to expand...
Click to collapse
Just upgraded from an older ROM to a new one, which contained radio 1.65.16.25. Dont know old version, but it was an older radio.
No luck =(
Shot in dark appreciated tho...
MVS
MVS said:
All,
I have an AT&T Tilt, which I have had a for a while. It has had various different ROM's on it. Currently running one of Dutty's latest for the Kaiser.
However, the blasted device no longer recognizes headphones (the ones that shipped with it, or either of the adapters I have). It charges fine, it connects via USB just fine, it just ALWAYS plays music and sound over the internal speaker rather than the headphones.
I've even pulled the thing apart, following the instructions on the wiki, and have taken a good hard look at the jack and connectors, everything seems to be fine visually.
Anyone have any ideas?
Thanks much
MVS
Click to expand...
Click to collapse
you've really got to do some more searching before starting new threads...it keeps clutter down and it is a mind set that is in harmony with the spirit of the forum
please see my post in this short thread that is just TWO WEEKS old...you will find that your problem sounds EXACTLY the same as this person's problem:
http://forum.xda-developers.com/showthread.php?t=442990
good luck!
Hi there.
I have a HTC SHIFT (x9500) with
ROM version = 1.0.7 ROMeO_S WWE
RADIO Version = 1.27.35.28
And i have a problem that bluetooth dosn´t work
Its like no bluetooth are installed in the phone
In COMM MANAGER theres only = Phone on/off - Flight mode - Active sync, but i can only choose phone on/off or flight mode.
Can i install a bluetooth (anything) and make it work ? (Just for bluetooth headset, and thats all)
Or is there a ROM with it all you can recommend ?
I only want to change the phone section --- The computersection is running fine with W7
Really hope someone can help me (and maybee give a link to "how to install it")
Thanks
Unfortunately bluetooth, wireless and SD card are not working on the Windows Mobile side of the Shift, only on the Vista side. And there is no publicly known cure for that. Sorry to disappoint you.
axelTP2 said:
Unfortunately bluetooth, wireless and SD card are not working on the Windows Mobile side of the Shift, only on the Vista side. And there is no publicly known cure for that. Sorry to disappoint you.
Click to expand...
Click to collapse
Thats ok.... I was just hoping that a bluetooth headset could solve my problem, here --->>>
My problem is that when i use headset (incl mic), no one can here me when i talk into the headset
When i disconnect the headset, the build in mic is working fine
I have tried with 3 headsets and the pin connection are ok, and the headsets working fine with other phones.
The problem is that when i connect a headset or headphones, the build in mic is disconnected.
If i try the headset(s) in the computersection, the mic is working fine.
And if i set the mic to (Listen to this), in the computersections soundoptions, i can here myself in the headset.
Maybe its the ROM to the phone theres no good ?
Cujox7500 said:
My problem is that when i use headset (incl mic), no one can here me when i talk into the headset.
When i disconnect the headset, the build in mic is working fine.
Maybe its the ROM to the phone theres no good ?
Click to expand...
Click to collapse
This is a known problem of the Shift, there is nothing wrong with your headset or your ROM version. Until somebody will find a cure for that (if ever....), you'll have to live with it.
axelTP2 said:
This is a known problem of the Shift, there is nothing wrong with your headset or your ROM version. Until somebody will find a cure for that (if ever....), you'll have to live with it.
Click to expand...
Click to collapse
Ok.... bad luck
But maybe you can help me how to setup MMS ?
I can sent and receive SMS, but i dont know how to set the phone up to sent and receive MMS´s
Cujox7500 said:
But maybe you can help me how to setup MMS ?
Click to expand...
Click to collapse
Hi Cujox7500!
Sorry, I only used my Shift as a phone for a couple of times out of curiosity.
To send MMS you should look for the settings your GSM operator is recommending, check on its website. Or maybe it could send the settings automatically via SMS.
bluetooth for htc x9500
Hello Guys
Nobody has yet solved for bloutooth in SnapVUE X9500?