Activesync issues - Tilt, TyTN II, MDA Vario III General

I have my kaiser connected to sync with three services. My home pc (contacts+calendar+tasks), my work pc (contacts+calendar+tasks) and my exchange server (only email).
My work pc cannot connect to my exchange server (due to firewall), but every time I plug my kaiser in, it tries to connect and then takes a loooooooong time before it finally gives up.
What can I do to work-around this? Any help would be most welcome.

Related

ACTIVE SYNC TAKES A LONG TIME TO SYNCRONIZE

hi,
when i place the xda IIs in the cradle, the active sync 4 takes a long time to handshake! i dont syncronize any of the stuff!
Any help?
click sync in async on your device :wink:
Try different USB port on your PC.
Try to sync without a proxy. Sometimes, when a proxy is defined in I.E., when putting device in craddle, active sync wakes up, and wait up to 3 or 4 minits before synching.

active sync and blue tooth

i have two problems that i just cant find answers too,
1- my blue tooth has stoped working. the light comes on and all the settings are right but it will not recognize or be recognized.
2- after my blue tooth failed i am not able to sync with my pc any more (even with usb) the computer recognizez the wizard and active sync tries to connect but it gives me a no partner ship error.
on the side note i am able to sync with my work pc...
please help
My recent experience
Assuming you have a backup of your synced information, try deleting your activesync relationship with your computer. Restart your computer and reestablish a new activesync relationship. This fixed my problem of not being able to sync via usb or bluetooth after my first bluetooth connection somehow crashed my ability to sync. Everything works great now. Another mystery of the electron somehow solved...

Does anyone know how to fix up Windows Mobile Device Center?

I'm trying to get my phone to connect to it...in any way...I used to be able to sync my phone (AT&T Tilt) via bluetooth, but now when I try, the phone gets user authorization, etc., (meaning IT can do what IT needs to), but WMDC does nothing.
Then, the sync fails, and the device says, "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer."
The problem...Windows Vista doesn't use ActiveSync of course...it uses the windows mobile device center.
When I try to connect via usb, then on the computer, a dealie pops up in the lower right for "safely removing hardware". It has HTC USB sync listed. My tilt tries to connect via usb, but it fails, saying the same thing, "To synchronize this device, you must install ActiveSync...blah blah blah."
I don't even know why this is happening like this...I normally don't sync too often (since I normally use my phone alone), but I was trying to get a new radio on my phone to help with another problem (see http://forum.xda-developers.com/showthread.php?t=365270&highlight=call+ended+00:00 )
but I can't even sync anything, so I can't use the tool to get the new radio on.
Subversive Asset 2.0 said:
I'm trying to get my phone to connect to it...in any way...I used to be able to sync my phone (AT&T Tilt) via bluetooth, but now when I try, the phone gets user authorization, etc., (meaning IT can do what IT needs to), but WMDC does nothing.
Then, the sync fails, and the device says, "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer."
The problem...Windows Vista doesn't use ActiveSync of course...it uses the windows mobile device center.
When I try to connect via usb, then on the computer, a dealie pops up in the lower right for "safely removing hardware". It has HTC USB sync listed. My tilt tries to connect via usb, but it fails, saying the same thing, "To synchronize this device, you must install ActiveSync...blah blah blah."
I don't even know why this is happening like this...I normally don't sync too often (since I normally use my phone alone), but I was trying to get a new radio on my phone to help with another problem (see http://forum.xda-developers.com/showthread.php?t=365270&highlight=call+ended+00:00 )
but I can't even sync anything, so I can't use the tool to get the new radio on.
Click to expand...
Click to collapse
Put your phone into tri color mode and you will be able to flash.
Power button + Camera button (hold them) press stylus into reset. HOld all 3. Tri-color screen will appear.
have you got the update to the drivers for WMDC, mine didnt work before I downloaded this update, oh and just remember, in windows, if it does work, RESTART fixes a lot of problems!
where would the update for the drivers for WMDC be?
Change the setting in USB to PC, in settings, connection tab. Try it with advanced functionality on.
I've tried it both ways. With advanced functionality ON, then the PC doesn't even recognize the device HTC USB Sync.
With advanced fuctionality OFF, then the pc recognizes HTC USB Sync, Windows Mobile Device Center recognizes nothing, and then activesync fails with the message, "To synchronize, get activesync 4.5 blah blah blah"
I used the device with an XP virtual machine I had, and XP + activesync has no problems seeing the device. However, MICROSOFT OUTLOOK in the XP virtual machine cannot see the device, so I can't correctly sync emails, contacts, tasks, or calendar icons. When I tried, the only thing that happened was that it deleted all of my calendar items (AGAIN!) and then said that "ActiveSync cannot synchronize Email, Calendar, Contacts, Tasks and Notes because Outlook is not installed on Windows PC 3. To synchronize, disconnect the device, install and run Outlook, and then reconnect the device and try again."
Outlook IS installed in the XP vmware (windows PC 3)...but it can't see the device for some reason.
I decided in the end that I could go without a new radio. I'll just find a way to fix my problem in a different way
Subversive Asset 2.0 said:
I've tried it both ways. With advanced functionality ON, then the PC doesn't even recognize the device HTC USB Sync.
With advanced fuctionality OFF, then the pc recognizes HTC USB Sync, Windows Mobile Device Center recognizes nothing, and then activesync fails with the message, "To synchronize, get activesync 4.5 blah blah blah"
Click to expand...
Click to collapse
With it "on", its not a USB connection. Whilst it uses the USB lead, it actually creates an RNDIS connection which uses IP to communicate. The device and pc should create a small private IP network. If your device can't even be seen by the Vista PC when advanced is on, then there is something blocking IP traffic, like an over zealous firewall. Try turning the firewall off temporarily. Also try disconnecting the pc from any other network and then plugging the device in.
I assume you have run windows update in Vista to ensure that you have the latest version of WMDC 6.1
With advanced "off", the device is using a traditional USB connection. Try deleting any existing partnerships and try a different USB port.
i have a similar problem however when mobile device center starts up it just gets the standard stopped running vista message and trys to restart unsuccessfully!
This may help you out with your problems however cant seem to resolve mine
http://modernnomads.info/wiki/index...+Device+Center+Troubleshooting#Beforeyoustart
unwired4 said:
With it "on", its not a USB connection. Whilst it uses the USB lead, it actually creates an RNDIS connection which uses IP to communicate. The device and pc should create a small private IP network. If your device can't even be seen by the Vista PC when advanced is on, then there is something blocking IP traffic, like an over zealous firewall. Try turning the firewall off temporarily. Also try disconnecting the pc from any other network and then plugging the device in.
I assume you have run windows update in Vista to ensure that you have the latest version of WMDC 6.1
With advanced "off", the device is using a traditional USB connection. Try deleting any existing partnerships and try a different USB port.
Click to expand...
Click to collapse
That's an interesting way of referring to it...the thing is...I currently do have my firewall off...would a router (dorm or home) block this? Because I have NEVER gotten advanced network fuctionality to ever work--when I was at home, my dad had a router set up and when I'm on campus, the dorm has a router on.
Even without it connected to any other network, it does not work. And I am using the latest WMDC 6.1 but still, it doesn't work.
The strange thing is...it works with ActiveSync in a Windows XP vmware machine (partially...it won't allow me to use outlook)...
Deleting existing partnerships deletes more stuff from my device deletes more stuff (my contacts and calendar are gone) -_-. Deleting existing partnerships on comp doesn't help..
JPHCCFC said:
i have a similar problem however when mobile device center starts up it just gets the standard stopped running vista message and trys to restart unsuccessfully!
This may help you out with your problems however cant seem to resolve mine
http://modernnomads.info/wiki/index...+Device+Center+Troubleshooting#Beforeyoustart
Click to expand...
Click to collapse
What I did from there was I uninstalled the drviers that correspond with the HTC Sync USB and the advanced network functionality (it's near the bottom of the link), and then I restarted again...now I seem able to sync...
i was connecting fine until i enabled vistas firewall and then it wont stop syncing. if i disable it, it will sync. i went through the exceptions list to allow sync but it still wont sync anyone know a fix?
Mobile Device Centre was working fine for me until about a week ago. Then it just stopped working ! My device was ok because it would sync in XP SP3 without any problems, but not in Vista. I tried repairinng, uninstalling, reinstalling without any success, I tried Advance Network Functionality and still no luck. I also tried disabling my firewall and trying again and still NO !!!. After searching the internet and trying the above, I nearly gave up until I decided to do the following :-
REMOVE ALL drivers related to the device i.e MS RNDIS adapter from network adapters in device manager AND the HTC USB drivers which are created when the device is connected while the Advance Network Functionality button is unchecked on your device (within settings -> Connections -> USB to PC )
UNINSTALL windows mobile device centre
DISABLE your firewall
INSTALL windows mobile device centre 6.1 (downloaded from MS)
connect your device - ensure the Advance Network Functionality button is checked
CONNECT device, let the drivers load and it should be ready to sync
ENABLE your firewall
The above method was the way it worked for me after trying numerous methods. Looking back, I believe my problem started when I unchecked Advance Network Functionality for some reason !
Subversive Asset 2.0 said:
I have NEVER gotten advanced network fuctionality to ever work--when I was at home, my dad had a router set up and when I'm on campus, the dorm has a router on.
Even without it connected to any other network, it does not work. And I am using the latest WMDC 6.1 but still, it doesn't work.
Click to expand...
Click to collapse
I don't think it's possible to get Advanced Networking Functionality to work with a Bluetooth Connection, only through USB. Even then it has to be a high quality USB port it's plugged into. My case is a good example in that I couldn't enable Advanced Networking Functionality or Activesync simply wouldn't connect. Since I was having unreliable connections from my VIA chipset old as the hills USB 1.1 motherboard ports, I installed a quality NEC chipset USB 2.0 Hi-Speed PCI adapter card and now on the same machine I can run USB Activesync connections with either option perfectly well and it stays connected until I unplug the phone. How are your USB ports?
uninstall active sync then reinstall. that is what worked for me.

Sync Problem

Kudos to the developers and owners of this site!!!
Now has anyone experienced the following problem when syncing TyTnII
When I connect my TyTnII to my laptop which is connected to a wireless gateway my gateway has a hissy fit and locks up. I have to restart the gateway with the TyTnII disconnected from the laptop.
It gets annoying when trying to install directly onto TyTnII and I cant.!?!?!?
Any help would be appreciated....
Am I getting this right?
- Your laptop is wirelessly connected to a gateway
- Your Kaiser gets connected to your PC (bluetooth, USB,?)
=> Your gateway crashes...
I don't see any relation between both actions (though there apparently is one). Could you post some more info? Is there anything special about your network configuration?
I wonder if it's not the gateway that is crashing, but your laptop is the one crashing. I've noticed on mine that during the initial connection phase where my desktop is recognizing the phone, my internet connection will be interrupted. IE will hang searching for a page. If I unplug the phone the page will pull up instantly. If I plug the phone up and wait for the connection process to finish, all is good.

Sync problems after connected by cable

I have quite a strange problem.
I'am using push mail on my Diamond. Everytime I have had my Diamond connected by cable to my work computer for charging it I have problems using push mail afterwards. The Daimond shows an error that it could not connect to the Exchange server which could be caused by network troubles, code 0x80072EE2.
I am also using Activesync on my work computer (Win XP) which means that my Diamond is also synched when connected by cable.
Are anyone having this problem? Only way to get my Diamond using push mail after it have been connected by cable is to restart it, then push mail is working just fine again. Should that really be necessary?
We are using Exchange 2007 at my work.
Please help me out here??
Chcek you connection setting, there are 2 connection, one should be to your ISP (your cell phone provider) the other one should be "My work network" , if you have other setting, by connect your cable at work, the lame Activesync add proxy setting to the exist connection and can **** your connection
if it's not "My work network" ...

Categories

Resources