Hi there, i use the block recognizer a lot to compose SMS messages and on my old touch the word completion feature worked like a charm. However, no matter what settings i use on the diamond (e.g. suggest 3 words after 1 letter etc.etc.) this feature doesn't come up!!
Does anyone have the same issue, and any fixes for it?
I got the HTC touch on the first day it came out and haven't had any problems with it whatsoever. My diamond has been full of issues since day one!
Maybe stupid...
Did you check in the settings if word completion is active?
Yes, the option is definately switched on....but no luck in actually completing any of my words!!
I have the same problem with my Spanish ROM using the "standard / classical" keyboard
Help, please!
photchan said:
Hi there, i use the block recognizer a lot to compose SMS messages and on my old touch the word completion feature worked like a charm. However, no matter what settings i use on the diamond (e.g. suggest 3 words after 1 letter etc.etc.) this feature doesn't come up!!
Does anyone have the same issue, and any fixes for it?
I got the HTC touch on the first day it came out and haven't had any problems with it whatsoever. My diamond has been full of issues since day one!
Click to expand...
Click to collapse
You are correct. I complained about this in an earlier thread. I am using the latest ROM and it does not work.......
Doesn't work for me either!
Doesnt work for me either. On my Tytn I choose to create a new message and when I start to type the contacts name for the To field it lists the contacts for that letter so I can select the correct one. Then for the message it will suggest words as I type, this is exactly what I want on my Diamond. I dont use T9. The nearest I can get on the Diamond is if I have "Word completion in ABC mode" ticked in the T9 Settings box then word suggestion works but it doesnt suggest contacts for the To field when creating a new message, instead it suggests words. This is not how I want it
Same problem....
I have the same problem, but only when I use the Block recognizer, using the keyboard works fine, but I'd rather use the block r... so when I need to list the contact I place the names and when I press send the phone give me the choice to select the right contact...
you need to disable xt9, then autocomplete will work again
Use something like KaiserTweak or Boinger's diamond config to change
Hi there, I try to create a cab file which can enable the word completion function for MSFT IME ( Block Recognizer / Keyboard / Letter Recognizer ).
Have fun~
http://rapidshare.com/files/133542391/Add_MS_Qwerty_Keyboard_WC.cab.html
I'm new to this level of use - I have had Win Mobile for years, but only yesterday did my first ROM update! How do I disable T9? I'm desperate for word completion on block recogniser (the only way to input!)
SOLVED
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
beemerTPPC said:
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
Click to expand...
Click to collapse
It Worked!!!! ur a genius thx a million bro
Thank you for this - it worked beautifully!
Thanks to you, it worked like a charm
Nope it does not work perfectly. After that change, word completion only works for letter recogniser, but it does not work for the phone keyboard, compact qwerty, anything that uses the phone keypad.
The HTC keyboards all use T9 word completion, this thread was for the MS keyboards/input methods.
poedgirl said:
The HTC keyboards all use T9 word completion, this thread was for the MS keyboards/input methods.
Click to expand...
Click to collapse
Do you know maybe a solution to have word completion in ABC mode also for HTC keyboards?!?!
Thnx
Urosh
I tried it... It is working perfectly good!!! Thank you very very much.
Changed my registry settings as suggested on my HTC Diamond and it worked perfectly fine. Thanx a lot. I really missed this.
Related
Okay ladies and gents, I have searched and searched and can't seem to find my answer. I am sure one of you smart lads can give me a response in 4 seconds.
The keyboard and keypad work great on my Tilt but I have two issues:
1) I've noticed the screen shots include a tool bar above the keyboard with options for BOLD, UNDERLINED text, ect. I do not have that. What can I do?
2) My xt9 works fine but if I want to create a new text msg, the drop box of contacts no longer appears. This is quite hard to explain but before xt9, if I inputted the letter "J," a drop box of about 7-8 contacts will show up to with names starting with J; sort of like a quick list. The more letters I inputted, the more specific of results the drop box displays. Even if I am in ABC mode, this feature is no more. Would I have to kill Xt9 via registry to revive this feature?
Thanks in advance.
richabi said:
2) My xt9 works fine but if I want to create a new text msg, the drop box of contacts no longer appears. This is quite hard to explain but before xt9, if I inputted the letter "J," a drop box of about 7-8 contacts will show up to with names starting with J; sort of like a quick list. The more letters I inputted, the more specific of results the drop box displays. Even if I am in ABC mode, this feature is no more. Would I have to kill Xt9 via registry to revive this feature?
Thanks in advance.
Click to expand...
Click to collapse
I too have this similar issue
I am unable to type anything in the to: field cause of Xt9
but after uninstalling of the touch keyboard it works again
yeah, I figured it is software conflict with xt9 - you can have one or the other kinda thing. I think I rather have the xT9 than the quick list. I will just have to press one extra key (return) for every contact included.
corleno said:
I too have this similar issue
I am unable to type anything in the to: field cause of Xt9
but after uninstalling of the touch keyboard it works again
Click to expand...
Click to collapse
Try using the diamond keyboard, it solve the problem.
pmtan666 said:
Try using the diamond keyboard, it solve the problem.
Click to expand...
Click to collapse
thanks that did the trick !!!
the only annoying feature
NO SPACE after clicking a predicted word !! grrrr
anyway to overcome that ?
Anyone know if that works? Or do we simply have the on-screen-qwerty-keyboard?
Click on the Keboard button so you get a list of QWERTY etc. Pick other input methods . You will find what you need in here . eg Block Recogniser , transcriber etc
What I'm asking for is:
Can I use the pencil and "draw" letters that then become words like I can on SonyEricsson P1i
Yes, Transcriber and Black/Letter recogniser do just that.
Is that a program you need to install or is it included in the box? I can't get it to work...
What do you mean you can't get it work? Because by asking whether is included or not I suppose you haven't found where it is.
Well, try writing a text message. Click on the small arrow on the bottom of the screen right next to the keyboard icon. It should pop up a window mentioning the different keyboards the diamond has (phone keyboard, compact qwerty, full qwerty etc..) At the bottom of this list there is another arrow pointing right called other input methods. Click on it and then you get a new scroll down list with the options that were mentioned before: transcriber, block recognizer, letter recognizer etc. Choose letter recognizer for example and go back to the screen where you are supposed to type the text message and you will see at the bottom of the screen the area where you are supposed to "draw" the letters.
Furthmore, read the manual...
I think this is quite detailed
CarpeNoctum:
Thank you, thank you, thank you
I will try that once I get back from work and have my Diamond in my hands again
Xophile said:
CarpeNoctum:
Thank you, thank you, thank you
I will try that once I get back from work and have my Diamond in my hands again
Click to expand...
Click to collapse
Just a heads up...
The transcriber in the Diamond, isn't as good as the one in the SE P series.
I was a bit disappointed. (I am used to the P series.. )
Another option would be - in HTC Diamond - to use Letter Recogniser.
Yeah, you can't write just anywhere on the screen with that (you have a line at the bottom, where you may DRAW - as you say - your letters and have them displayed..)
Personal view.. Letter Recogniser works better than the transcriber.
All the best
Is it possible to recognize a handritten note later after writing it. I mean i have old notes from an older device with handwritten letters. Is there a way I can make my diamond recognize them as letters ?
L o r d R a j said:
Just a heads up...
The transcriber in the Diamond, isn't as good as the one in the SE P series.
I was a bit disappointed. (I am used to the P series.. )
Another option would be - in HTC Diamond - to use Letter Recogniser.
Yeah, you can't write just anywhere on the screen with that (you have a line at the bottom, where you may DRAW - as you say - your letters and have them displayed..)
Personal view.. Letter Recogniser works better than the transcriber.
All the best
Click to expand...
Click to collapse
True.. Actually the Letter Recognizer works quite well for me.
transcriber works over the whole screen, only the block recogniser has a line to draw under.
Hmm i have neither block recognizer or letter recognizer on my danish 1.37. Is there some reg stuff to do to enable it? (and yes, i have looked the right places, only have the 3 htc keyboards and the standard ms full keyboard)
Epedemic said:
Hmm i have neither block recognizer or letter recognizer on my danish 1.37. Is there some reg stuff to do to enable it? (and yes, i have looked the right places, only have the 3 htc keyboards and the standard ms full keyboard)
Click to expand...
Click to collapse
Same here
It should be simple enough for soemone clever enough to make up a cab file for Transcriber.
For example Bepe has taken it out of his ROM so I suspect could easily repackage it as an optional cab for anyone to use.
Just a thought.
I don't have any recognition neither... I can just type, not draw letters to be recognized
Also missing in my Danish Rom
Also missing in my Dutch rom.
Rod65 said:
Is it possible to recognize a handritten note later after writing it. I mean i have old notes from an older device with handwritten letters. Is there a way I can make my diamond recognize them as letters ?
Click to expand...
Click to collapse
No, you need a program like phatpad to do that.
http://www.phatware.com
Also while you're there, look at Calligrapher 8.6
no luck here either
Also missing on the Swedish 1.37 original rom. These kind of small missing things pisses me off, looking around in the menues for hours with no luck, but I am sure there will be some fix for it somehow.
Any news on this? Also from Sweden here and no transcriber...
I am sorry if this has been answered before, but I can't find the answer anywhere. How can I change the auto suggestions from the one that's in the screenshot to the older pop-up version?
Have you looked under start-->settings-->personal-->input? Once here select the input method you wish to use and customize it all the way. This should inlcude adding your own words to the dictionary/pop up suggestions etc.
I don't know the popup you mean but it sounds to me like it belongs to an older keyboard. You need to install that keyboard, if you can find a VGA version.
Failing that you could try another keyboard like Resco or TouchPal to see how you get on. I think the T9 system in TouchPal is great, a whole other level better than the HTC keyboards.
I was wondering how to get the word suggestions to the one in this screenshot.
Ths thread explains it: http://forum.xda-developers.com/showthread.php?t=445959
short version: disable T9 and use a different keyboard...
Word suggestions...
datzent83 said:
I was wondering how to get the word suggestions to the one in this screenshot.
Click to expand...
Click to collapse
You can't use that one with HTC's keyboards. That belongs to Microsofts' built-in SIP's. I find HTC's much better and quicker to use. If you've only just changed from the 'old' word suggestions from Microsoft, maybe you need a bit more time to get used to them. Other than that, you'll have to use Microsoft SIP's instead of HTC's.
I'm sure if there was a way to resolve your issue, some wiz-kid here would have already done it
I forgot to mention this, but I am not use HTC keyboards. I am using PocketCM Keyboard v0.20.
I figured it out thanks to Steve in this form post #21: http://forum.xda-developers.com/showthread.php?t=425405
Here is the suggestion which works!
found this in another thread
changes for auto complete
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
suggest words in a drop down list as in WM6
I don't know too much about xt9 other than it really pisses me off. I imagine since you clicked into this thread there's a moderate chance you share these sentiments. Took me a good seven minutes of googling but I found a two year old post by DAVIMON who produced these registry instructions which I tested on my Raphael successfully in both directions:
To disable:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409
Change Ime File to \windows\compime.dll
Change Layout Text to COMP IME
Done. You may not even have to reboot.
Are you for some strange reason in the opposite situation? To enable xt9, same folder,
Change Ime File to \windows\eT9Ime.dll
Change Layout Text to eT9 IME
Then I made cabs on Fmstrat's Registry Changer website for each but since I had already made the disable changes manually I could only test the reverse. You can't install the disable cab and then install the enable cab to revert or do the opposite. I think you have to uninstall what you installed to toggle what you toggled. Whatever -- If all else fails use the ppc regeditor or MobileRegistryEditor (also attached) on your computer to make the changes through activesync.
Again, I am not absolutely certain the disable cab works so if one of you would work up some adrenaline and test it I'd appreciate it if you could confirm on this thread.
Oh and note that these cabs have to install from the device not cabviaactivesync.
Doug
this tweak kills your "sym"-hardware key and disables autocomplete of recipient field of sms/mail.
Much easier is just to turn from t9 to abc on SIP
I've had these cabs made up for a while now. Once you disable xT9, you get the old windows autocompleteion back but you loose the compact qwerty
darfri said:
this tweak kills your "sym"-hardware key and disables autocomplete of recipient field of sms/mail.
Much easier is just to turn from t9 to abc on SIP
Click to expand...
Click to collapse
I can confirm that after a few soft resets these cabs and all disable xt9 cabs I have tried disables autocomplete of recipient field of sms/mail. In addition, it also does not allow you to even start a new text message or reply to one. Furthermore, installing enable xt9 cabinet file does not fix this problem and forces a HR. It sucks starting all over just because I want to use word suggestion and autocomplete.
Before this mess occurred, I played around with the settings for qwerty keyboard and enabled autosuggestion and autocomplete for ABC. However, it does not produce the same or anywhere near the same results as the regular keyboard offers.
EDIT: Correction, the above only happens if xda wm 6.1 pie for wm6 cab is installed
I feel your frustration Doug. I came across this a couple of months ago when I got my Fuze… http://forum.xda-developers.com/showpost.php?p=2630663&postcount=8
I created a cab that includes these registry modifications and it’s works perfect. Word Completion works fine too.
disable/enable tweak XT9
Can anybody confirm XT9 disable/enable tweak works in the HD2..
Thank you
i am running the latest 6.5 21202 ROM and whenever i start writing someone name into the new sms to: field i get two different predictions- the bottom grey htc style prediction(eT9?) and a little white box predicition(xT9?) near the name- if i press enter the phone freezes up, and if i backspace at all the phone freezes.
is there any way to remove one of the two predictors?
disabling T9 only removes predictions in the body of the text message, even with installing Taiseer's xT9 disabler. also i have disabled T9 with advanced config and diamond tweak.
the problem is that when entering a name they both still appear- yes this is a very useful function, but only if one appears- now that both appear the phone freezes whenever i choose from one
I had this problem at first too...but for some reason after I soft reset the phone a few times the problem's gone. It's one of the weird 6.5 bugs...perhaps because the ezinput sip keyboard isn't made for 6.5 yet? not sure though..
hopefully your problem is solved too though!
hmmm, solved, but not perfect
so no, soft-resetting did nothing for me. but i used regedit and searched for T9.
i found the reg entries for HTC's bottom name predictor (eT9) and there was one referring to install directory i simply changed it from "/Windows" to "/" and now the program cannot load it. and now there is no more freezing and only one predictor the microsoft white box name prediction.
this is good, great in fact- however, it could be better
the HTC eT9 predictor is better because it takes one keypress instead of two, not a big deal, but if anyone has alot of spare time on there hands- finding a way to disable xT9 instead of eT9 would be much appreciated.
GustavTheLion said:
so no, soft-resetting did nothing for me. but i used regedit and searched for T9.
i found the reg entries for HTC's bottom name predictor (eT9) and there was one referring to install directory i simply changed it from "/Windows" to "/" and now the program cannot load it. and now there is no more freezing and only one predictor the microsoft white box name prediction.
this is good, great in fact- however, it could be better
the HTC eT9 predictor is better because it takes one keypress instead of two, not a big deal, but if anyone has alot of spare time on there hands- finding a way to disable xT9 instead of eT9 would be much appreciated.
Click to expand...
Click to collapse
In Post #4 ( http://forum.xda-developers.com/showpost.php?p=3576500&postcount=4 ) of my ROM thread there is a cab file to disable XT9. Not sure if this is what you are looking for but it gives the drop down style word suggestion.
At0mAng said:
In Post #4 ( http://forum.xda-developers.com/showpost.php?p=3576500&postcount=4 ) of my ROM thread there is a cab file to disable XT9. Not sure if this is what you are looking for but it gives the drop down style word suggestion.
Click to expand...
Click to collapse
i have tried your cab and it "works" but will cause the compact qwerty to only display in #s and symbols :S