i cannot make call or reciving cal - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

hi guys i have problem with my mda2 after i have upgrade it from wm5 to wm6 i cannot make call or reciving cal but ican send and recive sms also ican brows the internet and when I make a hard reset i dont lose any data it is just the same
my rom info:
rom veresion:6.1.2a16cs
radio veresion:1.19.00
pleassss help!!!!!!!!!!!!!!!!!

make calls
try hard reset with no sim card
also try reflashing rom with no sim card
some times it's best to flash back to 2003 rom then upgrade to 6.XX
just grab a Shipped ROM and flash back flash 6.XX good luck
P.S. you need to use async 4.5 or higher for wm6.XX again on this site search and you will find

try flashing radio 1.17 or 1.18

Related

problem with phone application

Hi
I have some strange problem with phone application
it doesnt want to switch off after outgoing connection I cant disconnect and the only possibility is soft reset
when someone is calling me after finish of incoming call it closes easly
I have 1.40 rom 1.12 radio tried to reinstall radio and backup after it via activsync but without successs. Has anyone same problem
Should I go back to radio 1.10 or better 1.31 rom?
Give me pls some ideas
rgds
lukasz

pleeeeeeeease help my pda2k bluetooth is not working at all

my device is pda2k or BA
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.12.00
Protocol version 1337.42
ExtROM version: 1.40.169 WWE
all of a sudden the bluetooth on my device did not send or receive
i tried several times the blue light flashes always but my device cannot be seen by other devices and cannot send or receive
is there any thing to install to solve the problem ????
is there any thing to do to know whether its a software or heard ware issue?????
pleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeease help
use a registry editor go to "HKLM\Software\Microsoft\obex\" here change the value of Dword "IsEnabled" from 0 to 1. and also turn on beam while transfering.
it works for me.
thank you
thank you
but where can i get the registry editor for my pda2k
please tell me
from here
http://www.phm.lu/products/PocketPC/RegEdit/
dear krishan2207
i did it just like you said but it didnot work
please please please
any helppppppppppppppppppppppp
please help
my problem didnot resolved
u should try a hard reset or rom change.
dear krishan2207
i did the hard reset several times and
i did re install the WM2003SE after the hard reset but it didn't work
coz i find the same
today paper after re installation of the WM2003SE rom ?????????
is there any way to delete or formating the old rom ( completely ) before the installation rather than the hard reset
please help
many thanx 4 your follow up
y u r not giving a chance to wm6 or 5.
dear krishan2207
i am not afraid of upgrading
i am afraid of downgrading back to wm2003
i want to know if the extended rom return to its original setting
i think u r very new to all this.dont worry man u can return it back.
dear krishan2207
i ve changed my rom to wm6 & back to wm3 several times
but blue tooth still not working
i think it is a problem in BT driver
any help with that please
another Q ?
how can i remove my old rom completely ie not up grade or replace i want to delete my rom completely before i install the new rom
thanx 4 help
DrAsd
hv u done a hard reset after upgrade if no, chk the wike and u can not empty(completely remove) your rom. when u upgrade or downgrade ur rom all files get changed but U HV TO DO A HARD RESET. MUSTTTTTT.
i did the hard reset before & after up grading & downgrading
and the same result was found
any help with the blue tooth driver ??
Same here, tried everything
I bought a T-Mobile branded Blue Angel used at an electronic swapmeet last month. I thought the unit was in good working order as I tested the voice GSM calling ok. Now I found that the Bluetooth does not work at all. I tried upgrading to WM6 and downgrading back to 2003SE and did many hard reset all along. It'll not find any BT devices, not can be found by others. It shows up as if it is working, in the BT stack, as well as the LED, but no communication at all. I think the chip is dead.
I wonder how I can get this repaired, and how much it would cost me. It's a bummer, otherwise it's working fine.

GPRS not working after upgrade to new HTC rom

Hi, I´m from Spain . Thanks for read this thread
I have a problem with my HTC Diamond. It was working very good with a cooking rom but after upgrade with the new original version from HTC don´t work GPRS connection.
I tested first with hard reset and second ,changing differents radios and spl in the way to found an answer for my problem but I didn´t found it.
I was checking the connection data from Orange calling him and calling HTC support directly. I thinked that it was wrong but I saw all was correct.
I created the connection manually first but it didn't work. After it, I erased all the connection, then I did a hard-reset and finally I created a new connection with automatically HTC Connection setup chosing Spain-Orange, but it did´t work either.
I was looking for this problem in the forum and I tested to flash again the mobile with the update 2.03 rom and after it made a hard-spl and write another radio without success.
I tryed too with Wifi Profiles cab like I read in another thread without success either.
I have not installed any program like "nodata" to cut the gprs connection.
I get always the same pop-up. "..... can't connect... unkown reason....."
Please Is there any way to fix it???.
Thanks in advanced
I had exactly the same problem immediately after upgrading to the 2.03 rom, it made me crazy I tried everything, I even thought having disabled gprs with no-data the day before the upgrade screwed something up but in the end I called my provider (Telia-Sweden) and they re-activated the gprs data account and it's been working fine since then
Very weird but I'm glad I made the call.
Thanks owziee for your quickly answer, . I was speaking with Orange to re-activated the data service and they did it. Before it I went to an Orange distribuitor shop to upgrade my sim-card for if it could be an incompatibilty between the phone with the card
New sim-card. New re-activated service and it still not working.
HTC told me that it could be by a corrupted data in the WM and they think it can be fixed flashing again the phone to update it in a service center.
I was thinking about it and sincerelly I have a dude for if I have used the correct spl and radio flashing the phone.
I made hard-spl sometimes. I used differents files but always unsigned spl.
At this moment I am trying "1.93 signed" without success.
The file I use to update the phone is:
_HTC Touch Diamond_MRII_RUU_Diamond_HTC_SPA_2.03.412.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship
Please, What could be the way to fix it??
Thanks in advanced for your answer..
WondiW
I still thinking about my steps....
Uhmmm, could it be by the method used for unlock it???
I remember that I unlock it but I press to write CID to 00000 too.
Is there any method to calculate the CID to write again for it is the problem???
I don´t know what I must to do. I have tested some minutos ago the htc rom 1.93 version without success.
Thanks again

Can't make phone call or recive it after upgrade ROM

Hello to all,
I have big problem with my BA GSM... I have done a lot of research but I can't solve my problem...
I have upgraded my BA (SPV M2000 ORANGE UK) from win 2003 SE to Win 6.1, Win 6.5 Win 5... But in all ROM versions I don't have a possibility to make or receive call... Phone is on automatic search for network and always founds my home network, but when I'm supposed to receive a call, network is going down (just loose it). When I want to make call same thing happens. When I switch to manual searching for network I get this message: "Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again"
I have tried to change radio ROM to every version you have on forum (right now I am on last 1.15), but still same problem.
When I was on the win 2003 SE, I have to use unlocker to make GSM working and that is working just fine... But when I upgrade to any other version of ROM or radio ROM, GSM doesn't function like it should...
Device information for my BA:
Operatior Version: wm 6.1 ppc Pho...
ROM version: Black Skin HT4...
ROM date: 08/08/08
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM version: 1337.45
ExtROM version: Black Kernel
Model no: PH20B
Many thanks in front for any idea
Try going back to the original ROM or reflashing you current one. I had a similar problem where my sim was not inserted completly and would keep dropping in and out.
Thanks for respond I already tried to change sim card, but same thing happened... I don't know where I can found the original ROM for my SPV M2000 orange UK to try to fix my GSM... Does anybody now where I can found the original ROM for my baby ?
Here are 2 places for the original ROMs, also with original radio ROM.
http://firmware.atspace.com/Blueangel.html
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Thank you for help, I restored phone to shipped ROM RUU_v2.5_OrangeUK_v5.40.1.179.ship and everything works fine... I have don't have any problems..
Is that mean that now I can't upgrade my windows to any other windows for my phone, or I should try again with some differed ROM...do you have any idea what is best ROM for my BA ?
Working Device information:
Operator version: 5.40.1.179
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.06.02
Protocol version: 1337.38
ExtROM version: 1.40.179 WWE
You should be able to upgrade to other ROMs, I am not to sure why you had the problem with so many different ROMs. I use xplode's R7.1 WM6.5 ROM, but there are other to use. swampy395 also has a pretty good 6.5 ROM.
http://forum.xda-developers.com/showthread.php?t=482997
also make sure to remove the sd card AND the sim card from the device before upgrading and have the battery charged 100%, that should do the trick
please delete
Unfortunately its impossible to change ROM...I tried every Xplode ROM from ver 5 to 6.5, and also I tried swampy395 ROM... Always the same problem remains - GSM drop after I try to call or receive phone call, and after that, no SERVICE at all... I switched to every radio ROM from 1.00.00 - 1.15
I think I'm doing everything ok:
1) removed SIM card & memory card and confirmed that battery is 100% full
2) Entered bootloader and start MaUpgradeUt_noID
3) After upgrade is finished, I have done hard reset and entered in boot menu then do NO YES YES
4) After system is normally booted, I inserted SIM card, switched phone ON and reset it after that, because radio ROM need to boot also
And that's the way I have done upgrade
wow, that's a tough one.
question: i saw, the shipped rom you used, was orange uk, is your phone actually a british orange branded one, or was that just a test shipped rom?
have you ever, in wm2003 or wm6 tried running xda unlock? http://forum.xda-developers.com/showthread.php?t=240784 to get a sim unlock or just for fun?
and let me just throw one more thing in the discussion, the newer roms seem to support newer sim cards that wouldn't have worked with wm2003, maybe that is true the other way around as well, maybe your sim card is too old to work in "your new phone". happened to me once with another phone. contacted my operator and they sent me a new sim card, with the same number. a copy of my old card, just on the new ones.
have you ever tried it with another sim card?
wow, that was all i can come up with, your problem is really complicated and you already tried so much yourself, there is hardly anything to suggest anymore
Chef Tony my friend,
I have to unlock my phone when I receive it from UK (ORANGE UK is phone for sure) I do unlock with xdadev_all_unlock-v1.6_138.exe and its successful. I do unlock again for many times with new ROMs but nothing happened. I also try 4 different SIM card and there is no change... I will contact my network operator to see what they think...
Many thanks for helping me
Hi there. Have you solved this problem?
Best regards
Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before
Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before
And after i upgrade the rom my youtube player doenst work!
please make sure, you tested all the things suggested before. plus after posting three posts in a row, i would have expected a little more information, like rom version, country, carrier, radio version and so on. there is nothing new to say, if we have to guess everything.
about youtube, well, that depends on what rom you are using, you might even be able to just go on the site in your browser, of if you want a faster and more reliable solution, try -=this=-
Im still on wm2003... there is no solution for me

Help, no phone dialler, incoming calls.

Hi, noob here,
I recently added TofClock WM6.0 version to my Himalaya II, but I lost the functionality of the phone dialer, and the ability to make or recieve calls. I called myself from the home phone and nothing happened, then I instantly got a message saying I had a missed call. I then installed WM6.1 which is working fine, but still the dialer is no longer working? I cant click it in the start bar, I cant click the green call button on the device, I cant go into programs and open I am currently on:
WM6.1
Rome Version: 6.1.2a16CS
Radio Version: 1337.18
CE OS 5.2.19209
Build 19209.1.0.2
Is there something I can install to patch this problem?
Also is there a patch that will restore the functionality of the tasks and calender as I really need them, they stopped working after the first update from 2003, and I need it for Uni.
Sorry if this has been posted before but I really did search for ages on these forums before signing up to ask.
Any help would be brill.
Help!!! this is still a problem. I really like the Himalaya, but without it being able to function with a dialer or receive call, it is useless to me.
For me it seems like a hardware problem or a corrupted radio rom.
Did you try to flash back to your original WM2k3. I hope you made a backup.
Or try to flash the radio again, without changing the OS.
You can find them here:http://old.buzzdev.net/downloads.php?category=8
Good luck
Thankyou for your reply. I have downloaded the new radio. Can you send me a link on how to flash this file. Do I just add the software to the phone via active sync and then install it?
I am still new to this, and it seems to be unable to get Network service from my cell phone company.
I feel like the phone is bricked. *sigh*
As I remember, you flash the radio rom as if it is a compete rom, but I'm not sure, yet.
Look around, I read about it somewhere. Use search function here or at buzz.net.
Good luck.
If your device has got a bricked phone function and is not useable for you any longer don't through it away.
One of the rom cookers in this forum (master efsane from turkey) has ruined his device, and I try to organize one for him as I did for master Ather (former Ather90).
Maybe it is possible to get him back to our forum this way, because it seems not to be as easy to build good (german) WM6.5 rom.
As your device is able to receive sms, it sounds as an issue with the ringer. Does it show an incoming call?

Categories

Resources