Related
Hi All
I have a SPV M2000.One day the phone stopped working. Everything was all right, it did ask for pin but then didn't even looked for network,was immediately saying NO SERVICE. I tried few sim cards - the same.
So then I wanted to reinstall the ROM, I downloaded the official from Orange UK , tried to install it,and it shows ERROR 114, Radio Rom Upgrade Error.
And the phone now is in bootloader mode and I can't do anything!
I downloaded different ROM from xda-developers ,at the beggining with a country error, but i managed to fix it and now with this ROM it's the same thing. ERROR 114. I tried everything, hard,soft reset, Pc reset etc. Nothing works!PPC still in bootloader mode!
Please tell me if you know what else can I try!
Guys,come on,really noone knows???
Have you read WIKI? Follow the first method to flash your ROM. Have you remembered to plug in your power supply to your cradle when you flash your device?
Heres another thread on NO SERVICE Plz help... No Service after radio upgrade. Happened to me. Read it and see the advise by MDAIIIUser and TheLastOne. If all else fails, bring it to the shop.
I had a very similar problem....
First I tried to update a whole package that means rom, extended rom and radio
The radio update is always the first one and there always upgrade error 114 occured.
So I updated every part seperately and it works except the radio. So I tried alot but it just didn't work..even downgrading was impossible. MDAIIIuser and happy goat tried to help me as well as they could but nothing had an effect.
So I read in another forum that asus mainboards have some problemes with these radio updates....I thought they were joking...but I tried the radio pdate at another pc and it worked!
I know it sounds a bit stupid but I was desperate and at last it worked!
You can read it here :
http://forum.xda-developers.com/viewtopic.php?p=89657#89657
TRied that method.Doesn't work
Any other ideas?
One more thing.Is it normal that in bootloader mode when I plug the power cable in the charging LED is not working?it was working before.
The battery is charged ,but shouldn't it show that the power is connected anyway?
EDIT: this is a reply to the first answer.
So you think I should try on another PC?I will today!Hopefully it will work.
So I managed to install new rom on a different computer! I think that there was a problem with active sync.I used the one that was installed from my old XDAII.Could that be the reason?Now i installed the one provided with a M2000.
But it doesn't work anyway
Still NO SERVICE message.
ANy other ideas different than taking it to Orange?
Hi rottie,
No Service could mean anything. Could your SIM card be faulty? Device SIM locked? Or hardware faulty? You cannot just use any ROMs you find at ftp. Try to flash your device with full shipped rom at http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade. Use the first method and upgrade using MaUpgradeUt_noID.exe to bypass the Country code error. Remember that you'd need to run MaUpgradeUt_noID.exe twice.
Read wiki carefully, it has alot of precious information. Cheers ^^
Before you update any version you should be sure that your radio is
compatible with your device. Usually all radio upgrades should be
independent off the language of the device but as I understood (could be
wrong) there are differences because of the servicenetwork frequency.
So you must be sure that the chosen radio is compatible and that your
device is not simlocked.
So perhabs you should chose an upgrade of your provider.
But perhabs itis better not to risk your guarantee of your provider by
using updates or components of other providers! Because there could be
the possibility that your device is damaged and you should bring it back!
Good luck!
Guys, you get me wrong.I'm not trying anything what I'll find.
1)One of the ROMs that I tried and the one that I left now is a ROM downloaded from orange.co.uk for SPV M2000. So there can't be any incompatibility, don't you think?
2)I have 2 sim cards,both from Orange,I was using both of them before in my M2000 which is sold only through Orange so there can't be any simlock problem,don't you think?
3)I used only that orange ROM, original and the I-Mate one.None of them were working good,always NO SERVICE.
I bought the phone second hand,with box,all accessories etc. But I don't have a receipt :? And of course have lost the guy's number.That's why I want to try everything before going to the service.
I think this phone is network blocked, probably been reported damaged or stolen, once the insurance or replacement is issued a block is put on the imei of the phone that was subject to claim.
First of all, I install T-mobile clean 2.26, I recall the internet working and with activesync, cause I got sbsh weather updated. Dunno why now it does work on my gf phone. Then I bought a phone and install the T-mobile 2.26 and realize it didnt' work and mokiz version too, then I try Mr. Clean 2.24a, and still doesn't work.....any help would be great.
My home connection with PC.
Microsoft activesync 4.2 on telus DSL line. Try all these rom,
My 8125 CID lunlock ...not sure..I tried to unlock it but dont' know if I got it
IPL -1.08 SPL 2.25 ...try all these rom....Mr. Clean 2.24a, Mosik 2.26, Sumitter 2.24, T-Mobile 2.26.
My gf 8125 CID lock
IPL 2.x SPL 2.x too, try all the rom on hers too, same prob.
But I swear her phone could update the weather before cause i'm looking at it wiht only two days with weather but now I can't do it.??
I thought it was my computer setting cause one time my comp frozen and had to reboot and it was around the same time. So instead I tried on my brother labtop which he just formated so everything should be alright.
But I was still unable to connect to internet with Activesync or bluetoothl.
Please help ......big Cooks.
There's a checkbox in AS that lets you forward the connection... tried that?
I'm running the molski 2.26 rom and had a mr clean rom before, as well as some factory TMO/I-Mate/Qtek roms. Never had any problem connecting with AS.
Appreciate the help and reply.
Hi, tomasz
Thanxs for pointing that out, in AS, I went to connecting setting and found what you were saying, the section my computer is in automatic setting, but I also tried my computer is connected to internet. Still I get this error in IE when loading a webpage, "The page you are looking for cannot be found due to unkonwn error 0x80072f78".
I wouldn't be so annoy if I didn't have internet in the beginning, but when I first got my 8125. Everything works fine with Mr. Clean and T-Mobile rom, without touching any setting in my comp and the phone, AS works like a charm, internet thur AS work fine without any manual setting.?? I didn't know things can change so much all a sudden? I hope someone out there know exactly what the problem is? thanxs again for the post tomasz, hope you have another solution or someone out there does....
Q9100 half dead!!!
Hi pals..
Listen gotta a big problem with my Qtek 9100.This is it. I've tried to update the pda to spanish so I could sell it to a friend of mine.I've downloaded the 1.3.7.5 version from xda-dev.Everything was working fine but in the middle of the process the power in my house failed.So the process stoped now I got the damn OS in Spanish but it doesnt work because it didnt installed properly.I've tried out everything I new about this pda.That is try to install in bootload mode,the only thing I've managed was update the IPL and SPL (that I dont know what doest that means) for that I've used an Orange ROM,if it would have updated properly it would show up the W2k5 customised by Orange but no,it keeps stuck in the same Qtek welcome star up image.
What and I supposed to do? I heard that I could install it loading it direct from the SD Card but I have to do it by copying an Backup SD card already done once mine OS is damaged. I've already tried the one in Dutch on the XDA ftp web page.But it seems not to be working.
Regards
Luiz Santos
Finally got my internet working thur AS
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Hi guys,
I am guessing my problem is the fact that there is something wrong with the devices radio, more the radio rom.
I a while back flashed my dad's KJAM, and it all worked fine, he however has not used the actual phone part of the device since then, and now that he needs it, its not working.
The phone is not in flight mode, and it doesnt ask for a pin, as thats how he set it before I flashed it.
The phone keeps searching for service, and when I try to manually set the network, it keeps comming up with some or other problem.
The phone worked before I flashed it, so I am guessing it is the Radio ROM.
I am thinking of ugrading him to WM6, is this recommended at all? Which thread is best to follow for upgrading him to WM6?
His current details are:
ROM Version: 2.16.9.1 WWE
ROM Date: 2/6/06
Radio Version: 02.07.10
ProtocolVersion 413.1.03
ExtROM: 2.16.9.101
Any help will be appreciated.
P.S. I did just try to the radio rom that is on the xda ftp, for the wizard, I downloaded and tried to load the REAL_Radio_2.61.11 ROM, but that does not want to load for some or other reason, it first complained about the radio update util and said I must update or something, the second time I tried it was a communication error. I am using my JASJAR's USB cable, is this a problem at all?
Try to change the radio rom to 2.19 or higher but i recommend you to flash first the 2.19 if that fails then try more higher.. i guess 2.2x and 2.6x something like that... i forgot..
Ok, u got a link for me for those ROMS?
wait a sec..
If you search and read all the stickies thread you might encounter this one your self..
http://forum.xda-developers.com/showthread.php?t=268031
There at that thread have a varius radio roms to download..
goodluck!..
post the result afterward
Thanks...I didnt see that one...I will have a look...shot for the help...
Ok, ive tried a few different things.
I tried to get it to connect with activesync, but it just doesnt want to work, I have also attempted a hard reset, and activesync doesnt work either.
Before I did a hard reset activesync 'did something', and a message came up saying it couldnt get an IP address from the server, and on the PC activesync came up with some other thing saying it cannot connect to the Windows Mobile Powered Device.
After the hard reset, I try activesync again, and now absolutally nothing happens on the phone. On the PC the little network icon comes up aqquiring an IP address and dissappears, and the just sits there...
At this point I ran a exe file on the K-JAM, to put it into bootloader mode, I ran the update tool, and again it complained about the update utility, again not changing anything, I ran it, and then it gave a communication / connection error, and a third time also a communication / connection error.
I tried only one radio rom, I am going to try it with the oldest version on that page, if that doesn't work, then I don't know. I tried it with ActiveSync 4.5 and 4.2.
In the mean time I tried the original ROM file from clubimate, that actually loaded, and worked, except the network still isnt working.
I also tried syncing the phone on another pc, and funny enough that worked.
On trying to load the new Radio ROM, it started the update process, and at that moment the phone jumps to bootloader mode, obviously the activesync connection gets lost, the update tool waits a bit, and then suddenly complains about the update tool, saying I need a new version or something.
I have checked the bootloader version of the phone, and it is version 2.x.
I try it again and then I get a connection error....I really need to get my dads phone working again.
Any ideas?
Not sure which Radio's you are trying but go grab a Radio Only ROM. TMobile 2.19.11 UK seems to be a very good and stable one. These are found in the ftp area: ftp://xda:[email protected]/Wizard .
Hope that helps.
Thanks for the help.....ive tried 3 different ones from there, they all do the same thing...so its a bit wierd.....
On the other side of the coin I decided to stick on another sim card, and it works just fine on the other sim card
So the radio is working just fine afterall.....just got back from the service provider and they rekon either the sim card is damaged or its a network error....so lets see what happens.....
Thanks to everybody for the help...
lol..
so its just the simcard after all..
lol yeah....
Although I would still like to know why I can't update the radio anyway...
isnt it because of your activesync?
I don't know what it is...
I used it on another PC alltogether and activesync worked just fine...the update tool interacts with the device, starts the update process, and then the phone goes to bootloader mode, activesync obviously losing the connection, the update tool waits a while and then suddenly says something about the update utility being old or something, I need a new one or what ever....
Then while in bootloader mode I try the update again and then I get a connection error.
Its all wierd.....
Dear all Kaiser anchestor,
I have a problem with my Kaiser. I really hope that all of you can help me. Ok? Please....
This is the problem :
At the begining, My HTC Kaiser run so slowly, sometimes freezing (Condition WM 6.1 with it's SPL 1.56)
After I read the same problem in jockyw2001 thread, then I tried to flash My device SPL to 3.28 (with the step in front of that thread and the SPL from that thread too)
Flashing the SPL to 3.28 was successfully and my device run fast now
BUT!!! I can't Enabled my WiFi!
Next, I tried to Re-Flash my SPL to 1.56 again, and it's done successfully. But, the WiFi still can't be enable.
Next step, I tried to downgrade the ROM to WM 6, and WHAT!
I still can't Enable my WiFi!
Now, I'd upgrade to WM6.1 again (official ROM from HTC website). But, the WiFi still can't be enable.
The condition when I enable the WiFi is loading then turn off by itself. What's the problem?
I really need all of your help for this.
This is my Device Information:
ROM Version :3.29.707.0 WWE
ROM Date : 05\07\08
Radio Version :1.65.16.25
Protocol Version : 25.83.40.02H
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
I'm stress already. Hope all you may spare some of your time for help me to solve the problem. Thanks before. For more detail, just watch the video that I record when tried to enable the wifi.
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Whats wrong with running the HTC upgrade on your HTC original TyTN II?
andrylim said:
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
Click to expand...
Click to collapse
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Hmm...
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club. But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Thanks for your reply Boss!
or this one
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Flying Kiwi said:
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Click to expand...
Click to collapse
Use the official upgrade package - not just the rom file
andrylim said:
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club.
Click to expand...
Click to collapse
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Click to expand...
Click to collapse
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh.... Btw, I've read from another thread (Athena). They said that someone ever got a problem like this. The cause is the WiFi MAC Address is missing/erased? Is it possible? I thought that MAC Address is a serial number of WiFi such as an IP, where saved in WiFi chip/device and cannot be erase. If do so, how to set an MAC address to the WiFi module? Do you have an idea? I'd tried to have a silly search about that address in Registry, but I cannot find any key that sounds about MAC Address. (Mac Gyver maybe?)
Flying Kiwi said:
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Click to expand...
Click to collapse
More specifics needed
andrylim said:
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh...
Click to expand...
Click to collapse
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Btw, bro... I've been search a problem like this in this website. I've found the same problem in Athena thread. They said that the MAC address is missing, but some one make a fix but only for Athena.
this their URL: http://forum.xda-developers.com/showthread.php?t=387454&highlight=Athena+WiFi+Problem&page=5
Thanks & sorry if i waste your time in solving my wifi problem
Flying Kiwi said:
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
Click to expand...
Click to collapse
andrylim said:
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Click to expand...
Click to collapse
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Click to expand...
Click to collapse
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Hahaha... thanks. Btw, I have another problems.
I bought this device from other country (Singapore). My friends said, the Singapore HTC can view the device history. They can see if the device already being flash how many times and anything unofficial program such as SPL or radio, then the warranty wil be void. Because, my friends already have such a problem also with his device Dopod U1000 (Even he revert to his original SPL or radio).
I think i should throw this device or sell it out and buy the new one. Hiks...
Flying Kiwi said:
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Click to expand...
Click to collapse
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
Doesn't it make sense to at least try what's been suggested first? What have you to loose? The hardware company have no need to know what 'ROM Action' has occurred in the past and who knows what any people you've leant your TyTN II to may have done with it..... They only need to know how it is now and whether it's currently official (ie flashed using the HTC upgrader).
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
I'll give you $50 for it.
The same problem
Im having the same problem... my wi-fi do not turns on! I have flashed this a lot of times, and sometimes works, sometimes dont.
Does anyone have any ideia about this? im stressed becouse i have the same problem... could anyone tellme a good radio in order to try to solve this issue? thanks
Wi-Fi issues
This has worked for me, dont know if its the same case with you or not.
My device was never able to connect to my Wifi n/w at home. If I went to start -> setting -> connections -> Wifi, it would show my home n/w as available, when I tried to connect to it, the status changed from Available to "connecting" then became available again.
In my home n/w I had access type authentication as WEP keys + Mac address filtering. My device was added to the MAC address list so that was not a problem. The issue was access point authentication which was set to WEP keys type authentication on my router. Once I changed from WEP keys to WPA-PSK (data encryption type TKIP) my WM was able to connect to the router.
I have HTC tytn II and its wifi is not searching any other wifi devices or router even in very close range , but wifi is turning on and the green light is also blinking
So, is there a hardware problem?
I did 3.29 hard spl , hard reset ,hard spl 3.34 , but the result is same.
and in network adapters IEEE 802.1b/g goes down and down in the list of network adapters , please HELP.! and sorry for my bad english
try a newer radio
mfsr98 said:
try a newer radio
Click to expand...
Click to collapse
Currently the Radio Version is 1.70.18.02
before this Radio Version I had 1.65.*.*
My htc diamond was locked on ORANGE UK, SO, i came onto this site and flashed it with a new rom using olinex 1.40 hardspl. I also flashed a new radio rom 1.00.25.05. I've just recently updated it with the new 2.03 rom wwe. But it was ever since i first flashed the rom that i noticed everything like gprs, mms, wap etc didn't work. I've since been using a O2 simcard. I have tried inputting the O2 settings but it doesn't dial out, or so it says. I was just wondering, does it have anything to do with the radio? Or is it a hardware fault...i can't get my head around it.
Download and install this cab file from your phone and restart.
HERE (orange UK only)
Which ROM did you flash?
Cheers for the reply and sorry for my late reply.
That file would be kind of useless since i am using an O2 simcard atm. I've unlocked the phone so that it can be used on any network, but for some reason i cannot connect to GPRS, MMS or WAP. it says it cannot dial out when all the settings are correct. I've even downloaded and installed the settings from the O2 cab file from this forum but it still doesn't work.
Right now i have the 2.03 rom flashed XBMOD.
The file was provided as you mentioned
I've just recently updated it with the new 2.03 rom wwe. But it was ever since i first flashed the rom that i noticed everything like gprs, mms, wap etc didn't work.
Click to expand...
Click to collapse
Which made me presume you wanted the settings for the Orange network.
Although there should be no problem with the radio you are using, XBmod suggests in his post using radio 1.09.25.23.
Have you tried changing the radio?
Radio Roms can be flashed from the device if renamed to DIAMIMG.nbh and you quickly hold down the "down volume key" and the <-- Back button when switching on the device.
R3PUBL1K said:
The file was provided as you mentioned Which made me presume you wanted the settings for the Orange network.
Although there should be no problem with the radio you are using, XBmod suggests in his post using radio 1.09.25.23.
Have you tried changing the radio?
Radio Roms can be flashed from the device if renamed to DIAMIMG.nbh and you quickly hold down the "down volume key" and the <-- Back button when switching on the device.
Click to expand...
Click to collapse
Yah, i've just changed the radio to .23 but still nothing. I just can't get the thing to dial out! Is there a setting that i need to check to see if it's enabled or not? =s Its jsut annoying that i can't send MMS or use GPRS on the go.
At least you can use the phone! My problem is the opposite...unlocked using the Olinex method...I can use GPRS MMS etc, but I can't reciever any calls or SMS...
I'm on 3 in Australia, so while we're on different continents & our problems are almost oppposite...I feel ur pain!
i seem to be in the same boat.
purchased diamond (orange branded) on ebay, phone unlocked to work with vodafone ireland. no roms flashed or anything else.
settings got for vodfone isp & live! i have tried both but to no avail. when i try to go on the internet via opera or ie i get a proxy server error on opera and on ie 'the page cannot be displayed or downloaded because the connection was lost etc......'
i have noticed one thing though, on the modem settings when i input the username/password as advised by vodafone, when i go back in to check these settings there are more than the normal amount of * which would equate to the password - dont know if that even makes a difference.
does anyone have any idea
Hey guys,
Anyone found a fix for this? I have the same problem with the mms... the settings are right I'm sure. I unlocked using Olinex 1.4? hardspl? Urm would like it to work ......... any suggestions.
Was on Orange UK now unlocked and using my O2 sim.