Related
Hi
Tried looking through all the threads and checking what I have done but still no joy hence post.
Have upgraded my old BA PH20B (I have another one so no panic) to WM5 with the latest WM2k5_AKU3.2_32mb_v1.3.2 setting Operator to ORANG001 (Orange UK).
1st time I tried everything seemed fine except although I had a signal from Orange I couldnt ring the phone (went to answer machine) and if I tried calling out the call disconnected with 0min 0sec calltime. I did receive a text message saying I had missed a call (me calling phone to test). But couldn't make or receive calls.
So I tried again from scratch twice and both times I have no signal and in Device Info have "Radio version: NONE" - followed instructions to the letter anyone any ideas?
Cheers
RichardC
ps. I can re-flash ROM OK.
this happened to me, too. but only when i changed batteries...
try to soft reset until the word NONE is replaced by the radio rom version (during boot up).
good luck!
Thanks for that, did soft reset and suddenly I have a radio ROM, so removed battery and inserted SIM then no radio again. Soft reset and radio back...weird
Now I can make calls and receive text but can't call phone (engaged or answerphone, maybe network I guess) but also GPRS connection info wrong so guess better start searching for info on that now. lol.
Thanks for the tip.
Check out my signature - use the links provided.
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
Makes sense thanks...just the GPRS issue now. lol
Just stepped through GPRS settings not changing anything but clicked OK at the end and it works now. Looks like install didnt configure everything fully.
Weird issue I now have is dialling out cancels and yet the phone I dialled rings about 10 seconds later (very weird).
When receiving a call - nothing happens on the BA, no ringing down phone calling out from then when the network drops the call the BA makes a small burp sound. So it knows it should be ringing but something is stopping it.
Tried upgrade to 1.15 Radio ROM - same. So now going to try downgrade to original WM2003SE Radio ROM version (1.06) and see how that goes unless someone has another bright idea?
same issue here
I am now experiencing the same issue, suspect its battery related though...hope someone can come up with something better than that. :lol:
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
You'll need to update those links for the new forum it seems.
Tried everything but although it all worked phone usage was inconsistant. Sometimes calling out works, sometimes just drops call with duration 00:00. Sometimes receives a call, other times goes straight to voice mail or un-obtainable tone even when signal fine and 2nd BA running WM2003SE works fine (same operator, Orange UK). Bluetooth also needed re-boot most of the time to be enabled. So reverted to WM2003SE for now .
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
hirsty said:
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
Click to expand...
Click to collapse
Thanks for that I tried 12 and then finally went back to standard WM2003SE radio version out of desperation. Nothing worked.
When I have the energy! I may try upgrading my other (newer) BA to see if that helps but first I need to backup my current ROMS as it works faultlessly under WM2003SE...why am I thinking of upgrading I ask myself
Alhumdulillah
everything is working fine for me
AKU 3.2 owns
CAM is fine
ricardo there must be some other problem i hope u didnt drop the phone too many times
looks more like a hardware problem to me
Hi
Phone is 100% OK with WM2003SE, so not a hardware issue...may try again soon, thanks for input.
Hello!
I bought my Diamond - Windows 6.1 - Vodafone Branding 2 days ago and I can say it is very slow...
I thought it shouldn't bother me because there are many software and support for this device... so no problem.
But the biggest problem as a phone is:
When anyone wants to call me after ca. 2,5 rings my diamond begin to ring to... but this is too late... because it leads the caller by 3 rings to the mailbox.
Is there any solution to better the reaction time for a call?
SOLVED:
by using a .wav tone and disabling the HTC design for the phone-aplication. This can be done with the application DiamondTweak
I have the same problem on my T-Mobile MDA Compact IV - I've missed so many calls, even though to the caller its been ringing for ages! Surely HTC should have tested this?
search 1st please
if you search the forum this question has been asked and answered many times
http://forum.xda-developers.com/search.php?searchid=16966072
look its that easy
also if you want the phone faster...you need to flash the rom with one of many cooked roms here on this forum
http://forum.xda-developers.com/showthread.php?t=258109
there is a patch for WM5, but i've WM6 on my diamond... is it ok?
it will work just fine with wm6.x!
hargibi said:
it will work just fine with wm6.x!
Click to expand...
Click to collapse
it didn't... after installing I had no sound on the diamond!
I tried a .wav ringtone... now it rings after ca. 1,5 rings on the phone....
my nokia rings before the first ring...
has anyone a better idea?
redliner51 said:
Slow...Slower...Diamond??
I thought it shouldn't bother me because there are many software and support for this device... so no problem.
Click to expand...
Click to collapse
1.34 Stock...1.35 Stock...1.37 Stock...1.93 Stock... 1.93 CE 5.2.20755 Custom ROM
Indeed, don't let it bother you. With each released stock ROM and the custom cooked ROM's based on those stock ROM's, the speed, functionality and stability increased.
Even the current official stock 1.93 ROM, which you can upgrade to without losing warranty, is considerably faster than the early ones.
And as for the phone reaction time, it's a known annoying issue, so search and read what many before you have posted about the subject. Good luck!
I've the 1.37.162.2 GER ROM...
How much would this upgrade help the speed?
too much
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2
is that the newest ROM? Date: 2008-07-31 ?
Is it in German, too?
I installed the new Touch FLO 3d... is that the same effekt?
no, you have to upgrade rom too
Ok, I updated to the newest Vodafone ROM... everything is a bit faster apart from the ring delay...
it begin to ring after the second ring...
no solution?
there is a solution... cant remember where it is, on this forum.
I've the Vodafone ROM 1.93.162.3 GER
is the following TouchFLO3D newer than mine?
http://forum.xda-developers.com/showpost.php?p=2358935&postcount=225
redliner51 said:
I've the Vodafone ROM 1.93.162.3 GER
is the following TouchFLO3D newer than mine?
http://forum.xda-developers.com/showpost.php?p=2358935&postcount=225
Click to expand...
Click to collapse
go into 'Settings' tab on TouchFLO3D and scroll to the bottom to the 'About' bit.
shows you version number there
(mine is 1.2.34837.3_1813.6)
Ok, I've the 1.1.34574.1_1630.38
but what is with the ring delay now?
i installed this ring_delay_patch.cab from this forum too... now it rings some milliseconds before the second ring...
i can't understand this... so many people have a diamond and diamond should be a mobile phone but its phone capabilities are less than an old mobile phone....
do you use a .wav file as ring tone?
because if you use a .wma file it is normal that the ring is delayed... this because a .wma file is compressed so it takes much more time to be loaded by the OS, instead if the ring tone is a wav file it is very fast (because not compressed), so you mobile will start to ring soon
this is a normal behaviour in WM, I had the same issue some years ago, then after some searches I realized how to solve
suiller said:
do you use a .wav file as ring tone?
because if you use a .wma file it is normal that the ring is delayed... this because a .wma file is compressed so it takes much more time to be loaded by the OS, instead if the ring tone is a wav file it is very fast (because not compressed), so you mobile will start to ring soon
this is a normal behaviour in WM, I had the same issue some years ago, then after some searches I realized how to solve
Click to expand...
Click to collapse
+1
(sorry forgot about this )
I forgot to mention that the wav file should be no longer than 30/40 seconds
Occasionally I have a problem where when making or receiving calls I pick up and there is no sound. If I Soft Reset I can make the call and it works fine. It's been starting to happen more often recently, and is really bugging me. It happens both when I'm using the phone speaker, and my headset.
what rom are you using? I have noticed the same thing the last couple of days since upgrading to L26 M2D v1
ah, here it is the same thread.
I use WM 6.1 htc version
Is there no bugfix?
Have you tried flashing a new radio?
Ta
Dave
data at info:
ROM: 3.28.407.0 GER
funkempfänger (i guess it's the radio): 1.65.16.25
protocoll: 25.83.40.02H
it was updated with the new htc 6.1 version what i've heard.
or can i downgrade it to a version that is working fine? when yes, where is the file to do so..
Right now I'm using Radio 1.58.16.27, I'll try another one, which do you recommend?
I was using 1.65.29.22, switched to 1.65.24.36 (I was using this with L26 diamond V12 with no issues)
had the same issue today.
hm, looks like a big upcoming problem for everyone...
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
virusv69 said:
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
Click to expand...
Click to collapse
Old thread but still, I've been experiencing this issue on the Hyperdragon series of ROMs from late October. Also had this problem in the past on some of Dutty's roms. The latest Raphael version (15/11/2008) has not exhibited this problem in 4 days. Only difference I can see is a slightly newer version of MSVC (1.6.19965).
Cheers.
gatewayer said:
hm, looks like a big upcoming problem for everyone...
Click to expand...
Click to collapse
I am getting the same problem intermittently, with a soft reset as the solution.
I am running a bone stock AT$T rom,recently upgraded to 6.1. It started happening post upgrade.
An upgrade problem?
same here... im playing around with different radios, it has to be a radio issue imo
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
1stPeregrine said:
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
Click to expand...
Click to collapse
My phone rings and notifies just fine when Texts,emails and calls come in. It answers just fine, but there is no sound. Then when I try to call people back, there is no dial sound and the call appears to not go through, until I do a soft reset, then all is back to normal.....................for a while.......................
I'm having this issue also. The other party can hear me when I answer, but I can't hear anything after the initial incoming-call ringing. A power-cycle restores normal operation but only for a while.
ROM: 3.28.405.0 WWE, 05/02/2008
Radio: 1.71.09.01
Protocol: 25.75.40.02.eMo
I'm in same boat as everyone else here.
Sometimes my phones rings, but when I answer I have no sound and other party can't hear me. Other times, my phone doesn't ring and all audio is muted (despite volume on). Soft reset is the only thing that works for me.
I gotta say this is really pissing me off. I'm missing lots of important calls because my phone doesn't ring when it should, or if I'm lucky it rings but has no audio so I have to soft-reset and wait 5 minutes for my phone to reboot & re-establish signal all whilst my clients are trying repeatedly to call me.
I'm willing to try other radios, but no one seems to have any working suggestions.
Thought maybe it was software, since I don't remember this happening after my initial WM6.1 upgrade. Uninstalling S2U2 didn't work (happened again today). Just uninstalled Voice Command, too, but haven't tested yet. VC's been flaky since upgrading to 6.1, working sometimes, failing to announce calls other times, plus occasional VC crashes at boot claiming "out of memory" which is blatantly untrue.
Just out of curiousity, is everyone with this problem using Voice Command, or just some of us?
Think I might have to go back to WM 6.0 since 6.1 didn't solve my Bluetooth issues plus screwed up Destinator...oh well. Schap's WM6 4.31 was best ROM anyway.
Anyone having any luck with this problem?
Like I said, I was running AT$T WM6 with no issues. The I updated to WM6.1 and started having these call issues.
Last week I flashed to HD III still no joy. SJ says that he is running the same radio as me, 1.65.24.36 with no problems.
Is it " my " phone? Microsuck 6.1 ? The radio ? Has anyone solved this with a new radio flash ?
I run a business on this phone and it is getting really frustrating, I don't want to go back to 6.0 just so I can get my phone calls?
I'm not just whining, looking for sucess stories.
Hi, havent been here in a while but i thought i'd add to the list. I have recently flashed HD3 (one of the early november editions) and it was without problems until friday when i dropped my fone. Ever since then i have had the intermittent sound in call which is only fixed by a soft reset (exactly the same as denco7). I haven't changed the radio since dutty's 1st diamond rom (a while ago) as i haven't had any problems but now im thinking about it.
Current setup (from device info):
ROM version: HD_III_Jade WWE
ROM date: 09/30/08
Radio version: 1.65.24.36
Protocol version: 25.94.40.06H
Not using MSVC
Recently flashed to HD III Blackstone hoping this might work but still having the problem.
I also flashed radios 1.65.24.36 and 1.70.18.02
and now I am running 1.70.19.09....... and it is still happening. It has got to be something in WM 6.1. Cannot be a software conflict, because it was happening when I was running bone stock AT$T 6.1 upgrade with no software add ons.
Again, I would hate to think that I have to downgrade to 6.0 just to get my phone calls.
Damn WM6.1 sound!
Well, I thought I'd let everyone know that I've uninstalled all my favorite apps from my Kaiser. No MSVC, no S2U2, occasional hands-free Bluetooth, and no A2DP. In that time, I've had only 2 incidents of no sound for the last 3 weeks--much better than no sound every few days or even several times a day. Don't know that the apps have anything to do with it since denco7 had same problem on an unadulterated AT&T ROM.
The big question is why do we all have the same sound problem but most WM6.1 Kaiser users do not (if everyone did I'm sure there would be a lot more *****ing). If we could reproduce it at will, we'd at least have something to focus on. Not knowing that, I'll have to guess and say that I suspect one or more of the following:
WM6.1 and/or the 1.65+ radios required for WM6.1 introduced some sound bug (deadlock, dereferenced pointer, etc.). The more apps that interact with sound and/or the radio, the more likely the bug will be triggered. But even if this is true, why does it happen to us but not to others?
The bug exists only in a particular base ROM source used by the ROM cookers. Still, should be affecting more people.
Maybe people who customize their phones are more likely to reset and clear any conditions that lead to no sound? Doesn't seem likely, but hey...
The problem exists only in specific Kaiser versions, perhaps even in conjunction with only specific WM6.1 builds and/or radios. I think there's been 5+ different hardware versions of the Kaiser line, but I can't find where I read this or how to tell what version your Kaiser is.
Bluetooth affecting sound? Got absolutely nothing to back this up other than WM6.1 supposedly fixed a lot of Bluetooth problems and during the time of my frequent lockups, I was using A2DP to stream an audiobook to my car's Parrot MK6000. Finished the audiobook & quit traveling so much, so I rarely used Bluetooth during the last few weeks when I've had only 2 no sound incidents. BTW, I upgraded to WM6.1 specifically because of the Bluetooth fixes, hoping they fixed the 100% CPU usage after finishing a hands-free call and fixed the A2DP dropping after calls. WM6.1 didn't fix either, so what did they do? Maybe their "fixes" just introduced new problems?
Possible dead zone f'ing up the radio and consequently sound? I offer this only because when I was working in a particular dead zone I had frequent sound problems. For some reason, my phone has problems reconnecting after leaving this dead zone and I have to reboot. Occasionally it would reconnect without rebooting, but I never correlated this to no sound. However, I haven't been there in weeks, and my problems with sound decreased (although I also uninstalled apps & quit using Bluetooth as much). Went there last Friday, and while I was there I found I had no Windows sounds. Could dead zones or even just temporary signal loss be f'ing up the radio and consequently the sound?
These are all just guesses--I'm just throwing out some possibilities so we can find something in common between us. However, I gotta say that if I don't find a solution soon, I'm going to switch back to WM6. Threaded messages are nice, but they're not worth this no sound headache.
BTW, I'm using:
AT&T Tilt (purchased within a month of initial release)
ROMeOS v4.21.1 (OS v5.2.20273, AKU 1.3.3)
Radio 1.71.09.01
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Can anyone recommend to me a custom ROM for the X1 that has had improvements to the Bluetooth implementation?
jhbodle said:
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Can anyone recommend to me a custom ROM for the X1 that has had improvements to the Bluetooth implementation?
Click to expand...
Click to collapse
Never heard any cook do BT differently exept base on differenr WM built. I do patch the driver w/ HD one such that Cyberon VC over BT works. I never had bt cutting out during call but sometime AFTER the call (and it's a well known issue to all HTC device)
Perhaps it is worth to try other radio (you don't have to change rom, just update radio). I'm really not sure, but radio probably contains Bluetooth drivers too. Is that right?
netbat said:
Perhaps it is worth to try other radio (you don't have to change rom, just update radio). I'm really not sure, but radio probably contains Bluetooth drivers too. Is that right?
Click to expand...
Click to collapse
When flashing generic ROM you flash a corresponding radio (R3A with 1.14, R2A with 1.11 or 1.10). So this is probably no solution, but always worth a shot.
Diferent RADIOs are NOT the solution (I tried more than five radios).
I have tried more than 30 diferent ROMs in spanish and english, with WM6.1 and WM6.5, and no one go right with the Bluetooth.
I call Sony Ericson and they said that is normal because to save energy. It´s my first phones that disconect the bluetooth.
I've had all kinds of BT problems.
It usually turns of by itself, even in the middle of a call. (not so fun in the car, driving)
An I've also tried different ROM's and radios, no better.
BT is not very good on X1 I'm afraid... : (
mattiL said:
I've had all kinds of BT problems.
It usually turns of by itself, even in the middle of a call. (not so fun in the car, driving)
An I've also tried different ROM's and radios, no better.
BT is not very good on X1 I'm afraid... : (
Click to expand...
Click to collapse
Would you say that this problem affects all Windows Mobile devices? For example, if I get an HTC Touch Pro 2 am I going to have the same issues?
I have no idea really, I only have the Xperia.
Any htc owners here ?
jhbodle said:
Would you say that this problem affects all Windows Mobile devices? For example, if I get an HTC Touch Pro 2 am I going to have the same issues?
Click to expand...
Click to collapse
jhbodle said:
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Click to expand...
Click to collapse
A friend and me, we both have the same problem as described by jhbodle since approx 6 months back.
During almost every call the sound is transferred back to the phone (as if I would have shut down the headset).
The weird thing is that bluetooth is still on and the headset is still treated as if it would be connected, meaning that I can still end the call by pressing the call button on the headset.
I can get the sound back to the headset (during the conversation) in two ways:
By choosing "Turn hands-free off" and then "Turn hands-free on" from the phone, or by shutting down the headset and then starting it again.
We have narrowed it down to that this happens whenever the phone disconnects from dataconnection (which seems to happen from time to time when using Activesync with Push - it disconnects and then directly reconnects). It does not matter if the phone is in 3G or GSM mode.
Have any of you noticed any similar problems during calls?
We are using the Swedish Telenor network. It might be possible that they have changed something that triggers the dataconnection to reset, and you on other networks are not beeing disconnected and therefore have not noticed this issue?
Maybe most of you are not using your dataconnections that heavely?
Those who are - could you test to disconnect the dataconnection while in call with TB headset..?
My friend have kept his phone with stock ROMs - he have had this problem with 3 or more different headsets.
I am flashoholic and have tried every ROM release from the top five cookers since the Hard SPL release for the Xperia. I have had the phone replaced once for a month ago - I have had this problem with both phones.
Hope you can help me to narrow this problem down even more, and most of all, I would like to know if we are alone with this problem..?
I have searched the forum for similar problems, but only found this one, so I did not want to create a new thread even if I it should be in the "General" category...
Oops... apparently I did not search enough - i have now found some other threads discussing this issue, but without any solutions.
I know that the most common BT issue for everybody is the BT deactivating itself after a call (I have had this from time to time aswell -especially after I have installed the MSVC software).
I don't want to start cross linking and dubbel posting, so I will wait and see if anybody has something to add to my previous post over here...
Would be nice to know if others, having this issue, can also link this to the dataconnection disconnecting.
How long are you talking on the phone for? I don't talk on mine for more than a few minutes, but occasionally I do get the 30+ minute calls that I have to deal with and I've never had blue tooth just shut off for no apparent reason.
For both me and a friend of mine, this happens during most calls regardless of the call duration (my calls usually take between 30sec and 10 minutes).
Sometimes, when I know that the conversation will take time, I reroute the sound back to the headset, but the same thing can happen again during the same call.
As I said, for me this happens whenever dataconnection disconnects on the phone.
Are you using dataconnection alot? Could you please try to disconnect the dataconnection during a call?
thanks
Hi
When in a call i am not able to hear any sound. Then when i switch it to speakerphone it works fine.
I thought my speaker are not working i changed my speakers. But the problem still there.
lookig for a solution
Thanx in advance
I'm having the same problem
Ringtone is fine, speakerphone is fine.
I have the same issue, it happened suddenly when i was in a call when i stopped listening to te call, so i had to switch to speaker.I did hard reset , changed rom nothing happened.When i call myself i can hear the busy tone, but when i call someone nothing happens!!!Any ideas???
Hello
I have the same problem as you.
you have tried to use a usb handsfree?
I'm too make a hard reset, but work only a few hours.
I try to use android, but the same result, in audio calls i'm not listen nothing.
i'm a fuze with wm 6.5 and energy rom
more information
os version 5.2.23080
manila version 2.1.38680.0 vga
rom version 25.oct.2009
same problem here
can anyone give me a solution because I am out of warantee. repair it? if yes how to repair it? or to buy any other mobile is best?
i am out of warantee too...the only solution i found is by using speaker and reduce the volume so that i don't get deaf...
you have tried to change the rom??
and the radio?
Hello
excuse me for my bad english first, i probe to change my rom from energy rom to romeo2 3.0.1, and change the radio for 1.11.25.01, and that works in my case. I have one day half with the new change and i don't any trouble with the call phones. I change too the AudioPara3csv for the better sound in the mobile and all the stuffs works fine.
Regards
anyone found any solution?i tried many roms but nothing happened, maybe hardware issue?
where can i find this romeo rom;i used search but nothing was found...
Have u tried a different radio for your diamond? When i had that prob with my Kaiser that solved the problem
In Raphael Roms, you should found it
ttherapon said:
where can i find this romeo rom;i used search but nothing was found...
Click to expand...
Click to collapse
sry, but i cant find the roms, have the same Problem and i dont know wich is the right rom ?