Related
This is quite a common problem, from what I have gathered reading from the web, but haven't found a solution yet.
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth.
What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Please to help... anyone???
i spent a day trying to connect to activesync using bluetooth, when i finaly manage to do this and disconnect it , next time i spent another couple hours trying to connect it again as it was before ). and i think i realize all specifics of that procedure. ur main goal is to recognise computer paired device as device connected via activesync service and not the "serial port" service on ur PDA.
That I know...
Thanks, for that, but that I know, problem is how to make the PDA realise that my system has Active Synch and not Serial port! Have you managed to find that out? If you have then please let me know. Thanks in advance.
It actually depends on what Bluetooth stack yr LapTop has, Broadcom,BlueSoliel, Toshiba or MS..U need to add a virtual Serial Port..set that serial port in yr Async connections on yr LapTop..then re-do the BT search on yr PDA and now it will show Async service in yr device..
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Using MS Bluetooth software.
I am using the Microsoft Bluetooth software and there is only incoming and outgoing. Kept refreshing but only shows 'Serial Port'!
__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
You are an absolute genius. I would never have thought about the "refresh" on the PDA bluetooth settings. It worked. I had given up previously so many times!!!
Eric
__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
I tried this port with com5 and com9 instead because 6 and 7 were taken (by what??). But unfortunately it didn't work, kept showing "Serial port" even after many refreshes.
What a nuisance
I had a similar problem. One of the reasons I bought the MDA was to sync wirelessly, and I never got this to reliably work, and wound up using a USB cable. The problem is that if it doesn't work without doing something, it is more trouble than the cable. Here are my notes about making bluetooth work:
A workaround is (i) on the MDA, go into bluetooth settings, open the PC listing and uncheck and then recheck the ActiveSync service, and (ii) shut down ActiveSync and restart it on the PC, using ActiveSyncToggle (Google for it). This program also solves the problem that activesync would start and then report that it couldn't find the bluetooth dongle for the idiotic reason that ActiveSync started before the bluetooth dongle was started. ActiveSync doesn't have an Exit/close button, and ActiveSyncToggle provides it.
Bluetooth&ActiveSync
kull said:
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth. What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Click to expand...
Click to collapse
It's rather simple. Once you pair PDA & PC with ActiveSync, you got a connection - PDA with PC (ActiveSync) via USB. This you can see in ActiveSync -> Connection Settings - checked box near "Allow USB Connections".
And if you'll pair your PDA with PC by Bluetooth (I have BlueSoleil installed), you'll have a Com port (#7 in my case) applied to your PDA - not in PDA, in PC - so you must sign this port in ActiveSync -> Connection Settings -> check box "Allow connection to one of the followings:", choose right port from the list (#7 in my case), tap "OK" (but not "Connect"!!!) - and then try to refresh BT connection on your PDA - you'll see pretty soon - "connection type - ActiveSync". Then choose "connect via BlueTooth" from your PDA - Voila! Yuo're synchronising via BT!
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
So thats all. Have fun!
Right
rusigor said:
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
Click to expand...
Click to collapse
That is probably the problem for me, I sync with two PCs, so when I got one working, trying to sync with the other would bollix up the first's settings.
I have no experience synchronising with 2 PC's. Suppose, you'll have to pair with both PC's and watch right connection settings every time - is particular PC switched to synchronise by USB or by BT - before trying to synchronise!!!!
Else you'll be forced to delete all synx. settings from you PDA (AS page) every time (IMHO)... and pairing you devices from beginning...
Solution found at last!
This was the solution to MY problem:
Originally Posted by miguelromerom
Found a possible "solution" for some people who have been having problems estabishing a BT AS Partnership with their Universal and a host computer running AS. What I found was you may need to edit the registry to fix the problem. Here's what happened to me yesterday:
Morning: Hard reseted my device and installed all my software apps at my work computer via AS in USB mode as a Guest. Note: I have not set up a partnership with any computer (either USB or BT).
Evening: Got in my truck and paired my JasJar to my BT GPS receiver via a BT Serial Port. Used TomTom and navigated home.
Late Evening: Got home. I wanted to set up a BT AS Partnership first so I went through the procedures of pairing my device and my home computer. And guess what, it didn't work. My JasJar would not see that AS was an available option on my home computer (NOTE: Before Hard Resetting my device in the morning, I had previously established a BT AS Partnership with my JasJar so I know my machine supported that profile). What the @?#~! Ok. I did a search of the word "sync" through the registery. Came up with an interesting issue. Under the registry entry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
In that directory I saw a folder listed as: 000a3a051d0f (This folder is specific to my device (more below)). I was wondering what this was since I did not have any BT ActiveSync Profiles set up yet. When I looked in it, I realized immediately that this is the Device Profile for my GPS RECEIVER!!!! What the hell was it doing in this directory I asked myself. So I deleted the folder 000a3a051d0f from the directory:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
And guess what? I was able to establish a partnership via BT immediately!!!
Hope this helps anyone else facing similar situation... I guess when I sent something via a Nokia phone it created a key which kept recognising my laptop as having only serial port. Once deleted - pronto my laptop showed up saying it had Active Synch!
My activesync on my siemens sx66 wont synch with my pc anymore. i do not think it is my laptop, but i think there is a problem with the phone. When connected to cradle, it charges the phone and my comp detects new hardware and the upper right light turns orange. But it fails to synch and the activesynch menu on my comp doesnt recognize any device that is hooked to my pc. Used to work fine...i got memmaid, and cleaned my registry....maybe i deleted an activesynch registry file?? Is there an activesynch.cab file available? I have active synch4.2. Any help please!
Try connect and then start ActiveSync on your phone manually and do a sync manually. If that works, it just means that you have deleted something.. wrong.
Have you tried soft reset your phone? maybe you have closed the activesync at the background?
i did a soft reset, and tried to sync manually but it does not work.
activesync
activesync with bluetooth.quite simple really.go to activesync on PC ,set the com port to 6 and hit connect on ur BA.will syn very well.try and let me know.
mukund
Folks, when I attach my Kaiser (MDA Vario III) to my laptop using Bluetooth, I can sync without a hitch... However, when I caonnect it via USB, I get the following: [see screenshot attached]
Any ideas? I can't fins any info on t'web?
Right... Had my Tytn (SPV M3100) replaced by Orange. This now does the EXACT same thing. Vista SP1, methinks...
Make sure you have the latest Windows Mobile Device Center installed and while your kaiser is plugged in run windows update and see if there are any driver updates available.
Try killing mobsync.exe in task manager (on the desktop pc). Then restart WMDC.
or plug in the usb, then open windows update and check for updates, it will detect it hasnt got the relivent drivers and downloadn them for you. normall its supposed to do it automatically if it doesnt find the drivers but for some reason it didnt work
Thanks sofar...
But I've tried all of the above.... To death. It works fine with my Athena & my Tytn, not with the Kaiser though...
I've been having the same problem. Thought it was one of the roms I had cooked initially but then I tried a few more roms (Duttys was one) and I still couldnt sync. Either on WMDC in Vista or ActiveSync on XP.
Now I think the USB is damaged - although it still charges fine. Bluetooth sync is fine too.
Now, i don't sync my device at work on my vista machine, but i can still connect to it.
None the less, I was looking at my windows update history and when i first installed the mobile center or whatever, i downloaded an update that is listed as failing to install in y windows update history.. so.. id ont know why it fails.. but yeah..
Had the same problem, but seems to be OK now.
I followed the help file in the Mobile device center -troubleshooting a cable connection. I post it her for reference. Don't know exactly what solved the issue (I hope permanently) but possibly the firewall ports?:
-----------------------
Check the device for relevant system messages and address any conditions affecting the connection.
Ensure that the device and the PC both have USB connections enabled:
In Control Panel set to Classic View, open Windows Mobile Device Center. Select the Allow USB connections check box.
In ActiveSync on your device, click Menu > Connections, then select the Synchronize all PCs using this connection check box.
Disconnect and reconnect the device.
Disconnect, restart, and reconnect the device.
Disconnect the device, restart the PC, then reconnect the device.
Do the following:
Disconnect the device.
Open the following ports for all programs in the PC firewall:
990: open inbound TCP port
999: open inbound TCP port
5678: open inbound TCP port
5679: open outbound UDP port
5721: open inbound TCP port
26675: open inbound TCP port
Reconnect the device.
Do the following:
Disconnect the device.
Disable the antivirus program.
Reconnect the device.
Do the following:
Disconnect the device.
Open Network Connections in Control Panel on the PC.
Right-click the local area connection created by Windows Mobile Device Center, then click Properties.
In This connection uses the following items, select every check box (to select all protocols).
Reconnect the device
fixed for me
I was having this problem. I'd also noticed that windows update was having problems installing a related update 'windows mobile remote adapter'.
Followed the advice in the help file re opening ports in the firewall. (FYI when adding a port just type the port number in the name field and in the port field).
It still wasn't working but when I did windows update after opening the ports it worked and is now connected.
Hope this helps
-------------------------
v1615 on Orange UK
ROMeOS.v4 07/27/08
radio 1.65.24.36
Try this, it worked for me.
Go to start<<settings<<connections tab. Then select the USB to PC icon. Uncheck enable advanced network functionality. Restart PPC and then try to re-sync.
I don't even know what enable advanced network functionality does. When unchecked, I see "connecting to host" everytime I cradle my Tilt. AND I never have sync problems, nor do I get the error message alluding to changes on the server and all changes will be lost.
I'm trying to get my phone to connect to it...in any way...I used to be able to sync my phone (AT&T Tilt) via bluetooth, but now when I try, the phone gets user authorization, etc., (meaning IT can do what IT needs to), but WMDC does nothing.
Then, the sync fails, and the device says, "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer."
The problem...Windows Vista doesn't use ActiveSync of course...it uses the windows mobile device center.
When I try to connect via usb, then on the computer, a dealie pops up in the lower right for "safely removing hardware". It has HTC USB sync listed. My tilt tries to connect via usb, but it fails, saying the same thing, "To synchronize this device, you must install ActiveSync...blah blah blah."
I don't even know why this is happening like this...I normally don't sync too often (since I normally use my phone alone), but I was trying to get a new radio on my phone to help with another problem (see http://forum.xda-developers.com/showthread.php?t=365270&highlight=call+ended+00:00 )
but I can't even sync anything, so I can't use the tool to get the new radio on.
Subversive Asset 2.0 said:
I'm trying to get my phone to connect to it...in any way...I used to be able to sync my phone (AT&T Tilt) via bluetooth, but now when I try, the phone gets user authorization, etc., (meaning IT can do what IT needs to), but WMDC does nothing.
Then, the sync fails, and the device says, "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer."
The problem...Windows Vista doesn't use ActiveSync of course...it uses the windows mobile device center.
When I try to connect via usb, then on the computer, a dealie pops up in the lower right for "safely removing hardware". It has HTC USB sync listed. My tilt tries to connect via usb, but it fails, saying the same thing, "To synchronize this device, you must install ActiveSync...blah blah blah."
I don't even know why this is happening like this...I normally don't sync too often (since I normally use my phone alone), but I was trying to get a new radio on my phone to help with another problem (see http://forum.xda-developers.com/showthread.php?t=365270&highlight=call+ended+00:00 )
but I can't even sync anything, so I can't use the tool to get the new radio on.
Click to expand...
Click to collapse
Put your phone into tri color mode and you will be able to flash.
Power button + Camera button (hold them) press stylus into reset. HOld all 3. Tri-color screen will appear.
have you got the update to the drivers for WMDC, mine didnt work before I downloaded this update, oh and just remember, in windows, if it does work, RESTART fixes a lot of problems!
where would the update for the drivers for WMDC be?
Change the setting in USB to PC, in settings, connection tab. Try it with advanced functionality on.
I've tried it both ways. With advanced functionality ON, then the PC doesn't even recognize the device HTC USB Sync.
With advanced fuctionality OFF, then the pc recognizes HTC USB Sync, Windows Mobile Device Center recognizes nothing, and then activesync fails with the message, "To synchronize, get activesync 4.5 blah blah blah"
I used the device with an XP virtual machine I had, and XP + activesync has no problems seeing the device. However, MICROSOFT OUTLOOK in the XP virtual machine cannot see the device, so I can't correctly sync emails, contacts, tasks, or calendar icons. When I tried, the only thing that happened was that it deleted all of my calendar items (AGAIN!) and then said that "ActiveSync cannot synchronize Email, Calendar, Contacts, Tasks and Notes because Outlook is not installed on Windows PC 3. To synchronize, disconnect the device, install and run Outlook, and then reconnect the device and try again."
Outlook IS installed in the XP vmware (windows PC 3)...but it can't see the device for some reason.
I decided in the end that I could go without a new radio. I'll just find a way to fix my problem in a different way
Subversive Asset 2.0 said:
I've tried it both ways. With advanced functionality ON, then the PC doesn't even recognize the device HTC USB Sync.
With advanced fuctionality OFF, then the pc recognizes HTC USB Sync, Windows Mobile Device Center recognizes nothing, and then activesync fails with the message, "To synchronize, get activesync 4.5 blah blah blah"
Click to expand...
Click to collapse
With it "on", its not a USB connection. Whilst it uses the USB lead, it actually creates an RNDIS connection which uses IP to communicate. The device and pc should create a small private IP network. If your device can't even be seen by the Vista PC when advanced is on, then there is something blocking IP traffic, like an over zealous firewall. Try turning the firewall off temporarily. Also try disconnecting the pc from any other network and then plugging the device in.
I assume you have run windows update in Vista to ensure that you have the latest version of WMDC 6.1
With advanced "off", the device is using a traditional USB connection. Try deleting any existing partnerships and try a different USB port.
i have a similar problem however when mobile device center starts up it just gets the standard stopped running vista message and trys to restart unsuccessfully!
This may help you out with your problems however cant seem to resolve mine
http://modernnomads.info/wiki/index...+Device+Center+Troubleshooting#Beforeyoustart
unwired4 said:
With it "on", its not a USB connection. Whilst it uses the USB lead, it actually creates an RNDIS connection which uses IP to communicate. The device and pc should create a small private IP network. If your device can't even be seen by the Vista PC when advanced is on, then there is something blocking IP traffic, like an over zealous firewall. Try turning the firewall off temporarily. Also try disconnecting the pc from any other network and then plugging the device in.
I assume you have run windows update in Vista to ensure that you have the latest version of WMDC 6.1
With advanced "off", the device is using a traditional USB connection. Try deleting any existing partnerships and try a different USB port.
Click to expand...
Click to collapse
That's an interesting way of referring to it...the thing is...I currently do have my firewall off...would a router (dorm or home) block this? Because I have NEVER gotten advanced network fuctionality to ever work--when I was at home, my dad had a router set up and when I'm on campus, the dorm has a router on.
Even without it connected to any other network, it does not work. And I am using the latest WMDC 6.1 but still, it doesn't work.
The strange thing is...it works with ActiveSync in a Windows XP vmware machine (partially...it won't allow me to use outlook)...
Deleting existing partnerships deletes more stuff from my device deletes more stuff (my contacts and calendar are gone) -_-. Deleting existing partnerships on comp doesn't help..
JPHCCFC said:
i have a similar problem however when mobile device center starts up it just gets the standard stopped running vista message and trys to restart unsuccessfully!
This may help you out with your problems however cant seem to resolve mine
http://modernnomads.info/wiki/index...+Device+Center+Troubleshooting#Beforeyoustart
Click to expand...
Click to collapse
What I did from there was I uninstalled the drviers that correspond with the HTC Sync USB and the advanced network functionality (it's near the bottom of the link), and then I restarted again...now I seem able to sync...
i was connecting fine until i enabled vistas firewall and then it wont stop syncing. if i disable it, it will sync. i went through the exceptions list to allow sync but it still wont sync anyone know a fix?
Mobile Device Centre was working fine for me until about a week ago. Then it just stopped working ! My device was ok because it would sync in XP SP3 without any problems, but not in Vista. I tried repairinng, uninstalling, reinstalling without any success, I tried Advance Network Functionality and still no luck. I also tried disabling my firewall and trying again and still NO !!!. After searching the internet and trying the above, I nearly gave up until I decided to do the following :-
REMOVE ALL drivers related to the device i.e MS RNDIS adapter from network adapters in device manager AND the HTC USB drivers which are created when the device is connected while the Advance Network Functionality button is unchecked on your device (within settings -> Connections -> USB to PC )
UNINSTALL windows mobile device centre
DISABLE your firewall
INSTALL windows mobile device centre 6.1 (downloaded from MS)
connect your device - ensure the Advance Network Functionality button is checked
CONNECT device, let the drivers load and it should be ready to sync
ENABLE your firewall
The above method was the way it worked for me after trying numerous methods. Looking back, I believe my problem started when I unchecked Advance Network Functionality for some reason !
Subversive Asset 2.0 said:
I have NEVER gotten advanced network fuctionality to ever work--when I was at home, my dad had a router set up and when I'm on campus, the dorm has a router on.
Even without it connected to any other network, it does not work. And I am using the latest WMDC 6.1 but still, it doesn't work.
Click to expand...
Click to collapse
I don't think it's possible to get Advanced Networking Functionality to work with a Bluetooth Connection, only through USB. Even then it has to be a high quality USB port it's plugged into. My case is a good example in that I couldn't enable Advanced Networking Functionality or Activesync simply wouldn't connect. Since I was having unreliable connections from my VIA chipset old as the hills USB 1.1 motherboard ports, I installed a quality NEC chipset USB 2.0 Hi-Speed PCI adapter card and now on the same machine I can run USB Activesync connections with either option perfectly well and it stays connected until I unplug the phone. How are your USB ports?
uninstall active sync then reinstall. that is what worked for me.
I browse the Internet on my laptop using to the GPRS/EDGE connection of my network provider and Internet Connection Sharing on my Kaiser.
I have been trying hard to establish a Dial Up Networking using either a Bluetooth or USB but with no success.
Bluetooth:
1. I make my laptop Bluetooth enable by using a BlueTooth dongle.
2. Pair the Kaiser and Laptop.
3. On my Kaiser, I cant see any service listed.
4. Though i can see that Win XP did detect a Bluetooth Modem and it installed it. When i "Query Modem" in my Control Panel for the BT modem, it does successfully query it.
5. I create a new Dial up connection and use this modem, however it never starts to connect to the GPRS.
I do have a Sony Ericsson T610, where i do exactly the same thing and the internet works like a charm.
Please can somebody explain me step by step process how to achieve this. I have read 100's of forums and imported many registry keys but it simply doesnt work. The same was the case with my Hermes(TMobile Vario II).
The ROM details are in my signature.
Thanks in advance.
Activesync?
last time i tried this, i used a USB cable and activesync was installed on my pc...it worked like a charm and the steps are oh-so-easy!!!
using a USB cable, follow these steps:
1. ensure the applications on your phone (web browsers, weather applications, etc) can use your data connection (edge/gprs) just fine
2. on your pc, you have to have either activesync installed (if you have windows xp) or windows device center (if you have windows vista)...i have only tried this with activesync so can't guide you further regarding vista
3. sync your phone and pc with activesync...just plugging in the USB cable on your phone and pc will usually get activesync going
4. on your phone, go to "Settings->Connections->Comm Manager" and hit the "Internet Sharing" button...a configuration page will open...select "USB" under "PC Connection" and whatever your data connection name is on your phone under "Network Connection"
5. hit connect!
now on your pc, check if the internet applications are working!
Note: it helps to disable ALL OTHER network interfaces on your pc from Device Manager
ASCIIker said:
last time i tried this, i used a USB cable and activesync was installed on my pc...it worked like a charm and the steps are oh-so-easy!!!
using a USB cable, follow these steps:
1. ensure the applications on your phone (web browsers, weather applications, etc) can use your data connection (edge/gprs) just fine
2. on your pc, you have to have either activesync installed (if you have windows xp) or windows device center (if you have windows vista)...i have only tried this with activesync so can't guide you further regarding vista
3. sync your phone and pc with activesync...just plugging in the USB cable on your phone and pc will usually get activesync going
4. on your phone, go to "Settings->Connections->Comm Manager" and hit the "Internet Sharing" button...a configuration page will open...select "USB" under "PC Connection" and whatever your data connection name is on your phone under "Network Connection"
5. hit connect!
now on your pc, check if the internet applications are working!
Note: it helps to disable ALL OTHER network interfaces on your pc from Device Manager
Click to expand...
Click to collapse
I dont want with Internet Connection Sharing. I want to use with Bluetooth Dial-up networking. Why? The reason is that with ICS, my screen glows permanently(even at the lowest bright option) and eats the battery. BT the screen will go off and still be connected.
True true...BUT!
sahuja said:
I dont want with Internet Connection Sharing. I want to use with Bluetooth Dial-up networking. Why? The reason is that with ICS, my screen glows permanently(even at the lowest bright option) and eats the battery. BT the screen will go off and still be connected.
Click to expand...
Click to collapse
that makes sense...BUT...the phone charges when it is connected to USB so Internet Connection Sharing worked well for me on my DESKTOP...but you have a laptop so it wouldn't make much sense in the long term to have your phone charge off your laptop's battery when you're on the go! i see your point!