Related
Windows VISTA Config guide
NOTE: Vista Rom update Utility(attached at the end of post #4) is required when Flashing Roms on Windows Vista.
To Download This Guide as a PDF, click HERE
To Send This Guide as an E-Mail, Click HERE
To Print This Guide, Click HERE
Written by MrVanx <<ALL CREDIT GOES TO THIS MAN. This is a direct Copy of the original document.
Wednesday, 18 April 2007
(Thanks to invictive for the screenshots and testing) << I LINKED TO HIS SCREENSHOTS
UPDATE: Please try downloading the latest WMDC first before attempting anything in this section of the guides. you will find the latest version HERE .
To follow this guide please make sure you have a copy of WinRAR installed, I will refer to the Windows Mobile Device Centre as the WMDC for ease of reading. If you do not have the WMDC installed please go here to install it first.
One problem with windows VISTA is that it uses the new "Windows Mobile Device Centre" and not activesync which we are used to, thus our standard RUU programs will not upgrade our Hermes devices as in windows XP. This guide will show you how to configure VISTA to work just the same as XP with our RUU programs.
For this guide firstly you need to download the new drivers:
Drivers for Windows Vista x32
Drivers for Windows Vista x64
NOTE:: If you are using a x64 bit computer, you will need to boot up with driver signing enforcement turned off. To accomplish this, you will need to press F8 during boot up. If you do not do this, the 64 bit drivers will not install properly and this tutorial will not be of any use to you.
Extract the contents to a folder on your desktop, call this folder "AS_DRIVERS". It contains the drivers from activesync which we will use instead of the native VISTA WMDC drivers when the device is in bootloader.
Now you must enter the bootloader on your device, to do this press and hold both the side ok button and the power button then put your stylus into the hole on the bottom of the device, your device will reset and show the red blue green bootloader screen. LEAVE THE DEVICE IN BOOTLOADER MODE and connect it using the USB cable to your VISTA PC.
Now navigate into the WMDC (Start>All Programs>Windows Mobile Device Center) and click on the "connection settings" menu icon.
In the connection settings menu untick "allow USB connections" then press OK. Now exit the WMDC and return to the desktop, go into the start menu and type "Services", this will take you into the local services dialogue and show a list of all services either running or registered with your pc.
Scroll down the list and make sure these services are present:
Windows Mobile-based connectivity
Windows Mobile 2003-based connectivity
If these services are not started then double click each one and set them to Automatic start by clicking the "startup-type" drop-down menu and selecting automatic then click the start button in the same window, apply the setting by pressing OK. Now return back to the desktop again.
Go into the start menu and type "Device Manager" then run, this will take you into the device manager. Click the "+" symbol next to "Mobile Devices" and double click on "HTC USB Sync". This will bring up the properties of the currently connected device (the hermes in bootloader).
Go to the "Driver" tab and click "Update Driver".
Click "Browse My Computer for Driver Software".
Select "Let me pick from a list...."
Click the "Have Disk" button.
Click "Browse" and navigate to the AS_DRIVERS folder we created earlier.
Vista x32 users select the file "wceusbsh.inf" Vista x64 users select the file "wceusbshx64.inf" Then click Open.
click next and the driver will be installed (wait a moment).
Press close and escape back to the desktop now.
Now we must stop the WMDC process, start the task manager by pressing Ctrl+Shift+Escape.
Click the WMDC line and click "End Process". In the confirmation window, again press End Process.
Now re-enter the WMDC and re-enable USB connections (click connection settings and tick the box "enable USB connections").
Your RUU programs for HardSPL/Radios/WM6 ROMs should now run as desired once you are synced with WMDC. Since we have updated the driver which Vista uses when the device is in bootloader mode.
NOTE:: This technique is still in testing so if you have any issues please post in the official thread. Until we find another way to get RUU working with vista you may need to revert back to XP for upgrading your Windows Mobile Based Device.
Thanks!
I saw this same article somewhere else and already did this
Thanks for posting this here though! Also, it helps to use the windows mobile device center 6.1 update. It works both on my desktop Vista Ultimate computer and my mom's home premium laptop
Also, a little sidenote, if you want windows mobile device center to display your own phone as the image instead of the standard PDA/PPC Phone/Smartphone image when you sync follow these steps:
Disable USB connections in Windows Mobile Device Center
Uninstall the drivers for your device from device manager
Save the image you want to use as an icon file called sync.ico
Save the icon to the windows folder on your ppc
Disconnect your PPC and enable USB connections again
Wait for the computer to reinstall the device driver and it will sync with the new icon
Sorry, I don't remember who first suggested this. I take NO credit for this whatsoever.
Woooooooooow !!!
dharvey4651
Awesome!
Must say,cudn't have been better than this,commendable job.
zabardast_1 said:
dharvey4651
Awesome!
Must say,cudn't have been better than this,commendable job.
Click to expand...
Click to collapse
Thanks. It took me a while to type up but as long as it benefits the community, it was worth it.
thanks you very much for the write up
great bro, i will add it to TNT notes
works nice, but the Vista update tool is out of date. Cant flash my Wizard with it.
Doesn't work with G4.
neonkoala said:
Doesn't work with G4.
Click to expand...
Click to collapse
Have you tried my tutorial on how to dual boot your computer so that it has Vista and XP on it? I started having problems with my phone not flashing properly after like 2 weeks. I installed a few Windows updates and then the drivers stopped working so I set up my computer to have Vista and XP on it so that I can use Vista on a daily basis and only use XP when I'm working on my phone.
neonkoala said:
Doesn't work with G4.
Click to expand...
Click to collapse
Anybody have found a Vista Update Utility for G4?
Thanks!
This got my G4 to finally stop giving me connection errors in the boot loader!
Now I can finally get my G4 unbricked
I used the shelltool successfully in Vista 32bit, but the world isn't liking me for flashing in 64bit so far... Either way, thanks!
Also, you might want to update the tutorial to tell 64bit users to boot up with driver signing enforcement turned off (Press F8 on boot up) else the 64bit drivers won't take.
frazell said:
Thanks!
This got my G4 to finally stop giving me connection errors in the boot loader!
Now I can finally get my G4 unbricked
I used the shelltool successfully in Vista 32bit, but the world isn't liking me for flashing in 64bit so far... Either way, thanks!
Also, you might want to update the tutorial to tell 64bit users to boot up with driver signing enforcement turned off (Press F8 on boot up) else the 64bit drivers won't take.
Click to expand...
Click to collapse
Thank you very much for that piece of input. I will definitely update the tutorial as per your advice to better assist 64bit users.
Thanks again, Dan.
The Vista RUU doesn't crash as I was used to, but it doesn't run either (with a prophet that is) it 's complaining about "beeing outdated".
Are there any solutions yet known for this inconvenience? Thanks in advance!
Vista RUU
Is there a newer version of the ROM update utility? The one posted above doesn't run, but, rather, just complains that it's out of date!
The driver method detailed above works great (with the caveat for x64 users that they have to disable the driver signing restriction), but unfortunately I'm still no further along because I can't seem to find an RUU that will work!
If anyone knows of one that really works on Vista, please pass it one. (I've searched through all these postings, but none seem to work!)
Thanks much for the detailed driver instructions!
Thanks for the Vista instructions, helps me out! but I ran into a problem degradeing to unlock my CID. Im not sure its me,software,and/or myphone but I got a invalid Vender ID error 294. I am using a wizard 8125 for this and using Vista. This is my first time, but im loaded on knowlaege unless i missed somthing. Thanks in advance.
Still no luck with Vista!
Has anyone found a complete method to flash on Vista? As posted above, the RUU included with this thread doesn't work. It gets most of the way through and then, just before starting to flash, gives a "This utility is out of date" error and exits.
Again, the driver instructions given in this thread are sound, but without a working RUU they only give you half of the solution for flashing on Vista.
I have successfully flashed using Shelltool, but it works sporadically at best.
Does anyone have a start to finish solution?
I followed the instructions given in this forum and they seemed to work perfectly for me.
here is my 2 cents though i had initially flashed my device using the origional t-mobile rom (SPL/IPL 3.08 radio 2.69) and it worked without any problems. It was only when i tried flashing with a cooked rom that it gave me problems.
Here are the RUU file from that rom and hopefully someone can figure out why it worked
This is just an updated version of deadnex's original guide, with a few things thrown in from various people who have found what works and what doesn't.
This guide has been used and tested as effective with the windows 7 rc 7100 build.
Step 1 - Go here http://www.microsoft.com/windows/windows-7/download.aspx and download Windows 7. You can get a key from the same place, so don't worry about not having a key.
In the event that the servers aren't offering the download {due to server issues} you can download a current version through a torrent site. I recommend mininova as it's the most legitimate of the bunch.
To get a key for windows 7 (32bit) (if you downloaded it through a torrent site), go to this address https://www.microsoft.com/betaexperience/productkeys/win7-32/enus/default.aspx
(64bit)
https://www.microsoft.com/betaexperience/productkeys/win7-64/enus/default.aspx
To clarify this part, you're setting up a usb flash drive or usb card reader and sd card to work as an installation drive for windows 7. I've followed these steps exactly, and found them to be completely accurate. They work, so do each step, and make sure to keep track of your steps so as not to miss one.
Thanks to deadnex for all of this information.
USB-install:
User feedback suggests that doing this next part should be done on a computer running windows vista. In winXP, your usb drive might not show up during the process.
edit (before step 1, create a folder on your main computer called windows7. Don't do this on your shift, and it's recommended to use c:\windows7\ to make the process easier. If you use another location to extract the files to, make sure to remember which directory it is, and adjust the steps of this tutorial to your own location.)
1 - Open the windows7 Iso file with winrar, and extract all the files into C:\WINDOWS7\ (or the folder you created as mentioned above)
2 - Open command prompt in administrator mode (start - all programs - accessories - (right click) Command Prompt and select run as administrator.
3 - Then type these commands without the - and press enter after each :
- CD\
- DISKPART
- LIST DISK
- SELECT DISK X ( X is the memory stick disk number you got from LIST DISK)
- CLEAN (CAUTION; THIS WILL ERASE ALL THE CONTENTS OF THE SELECTED DISK)
- CREATE PARTITION PRIMARY
- SELECT PARTITION 1
- ACTIVE
- FORMAT FS=FAT32 QUICK
- ASSIGN
- EXIT
- XCOPY C:\WINDOWS7\*.* /S /E /F U:\ (U:\ is the name of usb drive you are using for your install, if your drive has another letter, which is most likely, of course put in your own) (after *.* and after each letter preceded by / there's a space!)
OPTIONAL- Include an extra folder on your windows7 usb drive called drivers, and put all the drivers in there that you'll need to get windows 7 running smooth. Drivers are listed just a little further down on the page, so before completing the next step, go there and get the drivers.
WARNING- THIS WILL ERASE YOUR VISTA AND REPLACE IT WITH WINDOWS 7. THIS IS IT!!! Don't worry, win7 rc 7100 is far better anyway. Just to be safe though, backup your personal data before continuing to the next step.
[edit] With a little use and time, I've come to find that windows 7 has a great amount of compatibility issues with certain games. Although I've only had the chance to try a few, there seems to be a trend with win7 being unable to run a lot of older, but still 3d, games. Warcraft 3, and Dungeon Keeper 2, to be more specific. If you're not a gamer, it shouldn't matter, and Windows 7 is still the best choice for you. If you do like to play games, you might want to reconsider changing to windows 7. [edit]
Restart your computer, at startup push FN+F10, and choose your usb drive.
This will take you to the installer, select your language, timezone, and keyboard layout. Next.
In summary, you're going to select Custon (advanced) in the windows 7 installation process, and some card readers (sd to usb) don't work.
This will not affect your HTC SHIFT Vista recovery partition but it will remove Vista itself from your shift. Your settings from Vista will not be carried over to Windows 7.
_________________________________________________________________
DRIVER DOWNLOADS AND INSTALLATION.
Well, once you're through all that, you should be looking at your new windows 7 shift. Now's the fun part! Driver installation!
Go to this link, and download all of the drivers. (10 in total)
http://www.htc.com/www/SupportDownload.aspx?p_id=60&cat=1&dl_id=82
Putting these files on the same flash drive as your windows 7 install makes matters much easier for this time and next time should you need to try again. I also recommend copying and pasting the installation order from the htc site in a notepad or wordpad file and putting that in the same folder as your drivers. That way, when it's time to install your drivers, you can open that file, and use it as a reference to ensure you have the order correct. Chances are that your shift won't connect to the net, right after the win7 installation.
IMPORTANT IMPORTANT IMPORTANT
INSTALL EACH DRIVER IN THE ORDER THAT HTC HAS LISTED ON THEIR DRIVER DOWNLOADS PAGE. DO THIS OR FACE TOTAL DEATHKILL!!! actually, you'll just have driver issues, but that SUCKS!
After many people have responded, I wish to remind everyone. Install all the drivers. INSTALL ALL THE DRIVERS. Install all the drivers. Yes, I said that three times. Although your shift seems to work, when only installing a few, the fact is, drivers like the synaptics touchpad driver also control other parts of your shift, like the two face bottons above the touch pad. If you install one driver, and skip one in between, you mess up the order of installation that is so important, and then force yourself to need an entire wipe and reinstallation of win 7. So, one more time, INSTALL ALL THE DRIVERS FROM HTC.
One more important thing to know about the drivers is, DON'T LET WINDOWS RESET AFTER INSTALLING EACH DRIVER, select RESTART LATER AFTER INSTALLING EACH DRIVER. I REPEAT, INSTALL ALL DRIVERS (IN ORDER) BEFORE RESTARTING WINDOWS.
IMPORTANT When you've finished installing your drivers but still need to restart to take effect, go to your display settings (right click the desktop) and select a non aero theme. save settings after that. Windows 7 Basic is a non aero theme and it looks good. If you leave Aero enabled, your shift will blue screen of death crash when it boots into high res mode.
Windows 7 can not run Aero in high res on the shift. (for now, at least)
When you install the drivers – beware that you have to install them with Vista Compatibility mode enabled and run as Administrator. Right-click the driver setup file – click the Compatibility tab – select Windows Vista and mark “run this file as Administrator”
To save yourself a headache, copy and paste the following list into a wordpad file and place it in the same directory as your driver downloads. Putting this list in the same directory on your win7 flash card means that you can open it on your shift after installing win7 and use it as a reference when installing your drivers. Keep it all together.
EACH DRIVER IS 100% IMPORTANT AND NEEDED, DO NOT SKIP DRIVERS, EVEN IF THAT DEVICE SEEMS TO BE WORKING ALREADY. SKIPPING THE TOUCHPAD DRIVER MEANS THAT THE RESOLUTION AND COMM CENTER BUTTONS DON'T WORK. SKIPPING THE SOUND DRIVER MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN. SKIPPING THE VIDEO DRIVERS MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN.
DON'T SKIP DRIVERS.
Here's the order.
a. VISTA_INTEL Chipset Driver v8[1].3.0.1014
b. Intel VGA driver(7[1].14.10.1461)
c. VistaECDrvV1[1].0.1.10
d. TouchScreen(1[1].1.0.2)
e. Synaptics MicroPad(10[1].0.11.1)
f. Realtek Audio Driver R197(6[1].0.1.5653)
g. Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0 *
h. Extension Kit USBLanDriver(3[1].8.3.7)
i. Shagctrl_1[1].2.6.122-control center
j. Marvell WiFi driver(8[1].114.123.139)
This next part was contributed by Thaihugo. Thank you a ton for this contribution Thaihugo .
To connect the Windows Mobile (your Shift's other OS) side to the PC side of your Shift, run USB Tools in the windows mobile side. If nothing happens, go to your settings (still in mobile)- Connections, then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools first). Another note, some roms, for the wm side of shift, don't include the internet sharing app. If you can't find it, you've got a crap rom, and you should follow a guide which will allow you to put a real rom on it.
Make sure you are connected to the internet on win7 side (using wifi for example) to download WMDC (Windows Mobile Device Center).
If WMDC doesn't load, plug another pocket pc into the shift's usb port while running windows7 and it will download , or if you don't have another pocket pc lying around, download it manually from Microsoft.
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective.
Again, a big huge thanks to deadnex for originally posting the steps to this process. And thanks to everyone else who contributed to a better running shift via windows 7.
Caid.
444
You forgot to specify that drivers must be installed with Vista Compatibility mode enabled and run as Administrator
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
thanks for the reminder.
weird, list disk doesn't list my usb flash drive but lists all my other hard drives. what am i doing wrong?
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Thanks for your description. It looks good. Only onr thing let me bluescreen
my Shift. Whenever I install Synaptics MicroPad(10[1].0.11.1) my Device ended with a bluescreen. I tried a newer Version from the website, but no way, same result. Does anybody understand why? Does someone found out same?
Greets
Androgyn
thaihugo said:
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Click to expand...
Click to collapse
I've added this part, thanks again Thaihugo.
Caid
444
thaihugo said:
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Click to expand...
Click to collapse
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Greenarcher707™ said:
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Click to expand...
Click to collapse
It's like driving a race car compared to vista.
apoparis said:
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
Click to expand...
Click to collapse
Please, is there anybody who can help me resolve my problem? I tried lots of times by nothing works..I'm reading all these positive comments about win7 and I can't wait to have them on my shift.. I can see the usb, I browse there to the folder I have the drivers but can't install them.
Thank you in advance
This is for those who've encountered problems.
Start the whole process over again. I didn't make the guide clear enough when I first posted this thread. It's clearer now. The symantec drivers are probably fine, you're probably crashing because windows aero is still enabled, and it is crashing your shift whenever it tries to switch to high res mode. Disable aero.
As for apop, you need to install via the second option, not the first. I got the same error when I selected the first install option when I booted into the windows 7 installer. This method will completely remove vista as the main os and put it in another folder. As a precaution, I recommend backing up personal documents that are stored in any windows sub directory. *word documents and the likes.
Anything outside of your windows directory, or on the main hard drive itself should remain after the install, but I only did this process once with extra stuff on the drive (it stayed).
Back it up, and do a fresh install.
Caid.
444
Thanks for your anser Caid. I just don't have an external DVD.. Is it impossible to go through 1st way? I have read that some people managed to do it this way..
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
thaihugo said:
It's like driving a race car compared to vista.
Click to expand...
Click to collapse
wow, that got me convinced. installing windows 7 right now. gonna probably stay up late ha ha
Caid444 said:
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
Click to expand...
Click to collapse
Yes, I'm using a usb card reader and sd card. I don't have two options (custom/express). Just one "install now"..
P.S. Thanks for your interest in my case.
ok
After you select "install now" there'll be a license agreement. After that there'll be a choice between two install options. You need to choose the second one.
Caid.
Can someone explain to me how to set up a cellular internet connection through windows 7? I've got the sim card inside, the phone recognizes it, but I don't know how to get it working through win7, I used control center to enable modem, but still no luck. This is really annoying.
Caid.
444
SnapView Turn's and WM7 too ... the screen goes off
Hi, I completed the W7 installation successfully. I even got to conect SnapView with W7 this time. I say this time because with the previous Wm7 guide I wasn't able to do it.
Anyway, now my screen is blank for WM and W7. In fact I have to press the on switch to get the W7 screen back. Once I have W7 working I need to reset Snapview throught the Shift Control Centre to get it going. Finally Snapview / WM comes on. However it lasts on for a few minutes and then the screen is off again. W7 will last for a few minutes more and the same will happen. I then need to press the sliding switch again. The W7 screen will turn on back to normal (the OS doesn't actually turn off but just the screen); however, WM doesn't turn on (in this case it's the screen and WM itself). I then need to repeat the resetting process again.
I did do this:
"
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective"
I did it at W7. Am I missing something? Any hints from the experts? Needless to say, everything was working fine with Vista.
Thanks
I have Installed windows 7 in my shift and evrey thing is working fine except the touch screen it,s not working
i have followd the instruction but still didn't work
any one can help me to make it working
regards
Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?
khals said:
Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?
Click to expand...
Click to collapse
thanks i got it working but i got another problem
if i update the display driver i get the blue screen and it keep on rebooting automaticly
any solution for this
regards
That's because AERO doesn't run at the moment at screen resolutions higher than 800*600.
Boot into SAFE MODE - Delete New Installed Graphic Card Drivers - Enable Windows 7 Classic theme in Windows and Reinstall drivers!
Can someone PLEASE reply ?
I am desperate. I deleted the HPA Partition in order to free up 3Gigs and installed Windows 7.
I followed all the tutorials, so i installed ECDriver (Vista Compatibility Mode + Run as Administrator) and Touch Screen Driver.
I mention that i see HTC Embedded Controller (in device manager) after installing ECDriver , but touch screen doesnt work (after installing touchscreen drivers) = No Pen or Touch Input is available for this Display
What am i doing wrong ?!?
I also had the same problem, so, I've installed the VGA driver from the package the way mentioned somewhere here and in the same order, as I think the new VGA driver installed with the Win7 installation is missing an important bit at the end of the installation. After that, and after a reboot, the touch started, but I did not get a calibration screen. Even without the calibration, the screen seemed to be fine. I've also disabled Aero just in case as I did not want any more blue screens.
So you have installed ECDriver, Touchscreen and VGADriver (WinVista Compatible & Run as Administrator) in this order ?
When i install VGADriver, i get a 'Cannot copy'. I thought the driver was corrupt and tried re-downloading it, but this didn't solve the situation.
How did you manage to install it ?!?
First I've installed just touchscreen driver and it did not work, so I've installed EC driver and then touchscreen and it also failed. So, I've added the VGA. I think it did not want to install with Vista compatibility so I think I forced it through with XP compatibility, got a message saying the driver was older than what I had installed, I said yes, please, go ahead! It then installed and at the end some CMD windows poped up and then closed and I then installed touch screen again. Nothing seemed to have happened then, so I've restared the computer, had all my fingers crossed (very, very technical!) and voilá, touch screen was there.
Thanks for the support. I tried several times, following exactely your steps, but i didn't manage to make it functional.
Unfortunately I had to go back to Windows Vista.
Now i have Windows 7 Vista Ultimate SP2, instead of the preistalled Windows Vista Business OEM.
Althought it's running ok, i am waiting for the final version of Windows 7 (not the RTM that i tried installing).
Win7 installed = 7 GB, Windows Vista Ultimate = 14 GB :|
Hi
Sorry to hear that it did not work for you. Like I~ve mentioned elsewhere, the only thing that did not work for me all the way is the sd card that keeps dropping from explorer.
Did I mention that I did not do a clean install? I've installed it as an upgrade and had all the functions (Wifi, BT, Phone) on while upgrading to avoid the problem some people have of the wifi connection going missing when upgrading(W7)/downgrading(XP). I've been busy at work so did not have time to use it much or test it some more.
Well, you missed to mention that
I tried a fresh install, after deleting the HPA partition (now i have 37GB Hdd, instead of 33).
Maybe that's why it didn't work for me...
A friend of mine gave my his Shift to try installing Win7 via Upgrade. Maybe it works.
BTW : Windows 7 Ultimate SP2 is running just perfect on Shift. Too bad it occupies 20GB (after drivers and updates)
01. Make a Clear Installation (Format, Boot from DVD, Install WIN 7).
02. Disable Aero Theme.
03. Install Chipset Driver for WIN 7 (Now is V 9.1.1.1025), from Intel Web Site (As Administrator). Restart.
04. Install VGA Driver for WIN 7 (Now is V 15.12.75.4.1930, 02 Oct. 2009), from Intel Web Site (As Administrator). Restart.
05. After is finished the Intel VGA installation, if you want you can enable again the Aero theme.
06. Go to Device Manager -> Monitors -> You will see something installed like Flat Panel Display (never mind, whatever you
will see installed from Win7, right click, update driver, browse my computer, let me pick of a list of device drivers, choose
Generic Non-PnP Monitor, Apply). Restart. Now, you will see some Resolution Choises that appeared.
07. Install HTC SHIFT ECD Device Driver for Vista (Compatibility Vista SP2, as Administrator).
08. Install HTC SHIFT Touch Screen Driver for Vista (Compatibility Vista SP2, as Administrator). Restart.
09. Install Synaptics Micropad Driver for WIN 7 (Now is V 14.0.3C for XP32/Vista32/Win7 32 Bit Signed Default), from Site
Synaptics (as Administrator). Restart.
10. Install Realtek High Definition Audio Driver for WIN 7 (Now is V R248 x86 Vista/Win7), from Realtek Web Site (As
Administrator). Restart.
11. Install HTC SHIFT Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0, for Vista (Compatibility Vista SP2, as
Administrator). First Driver, then the Program. Restart.
12. Install manually from Device Manager HTC SHIFT Extension Kit USBLanDriver(3[1].8.3.7).
13. Install HTC SHIFT Marvell Wifi driver 8[1].114.123.139 (Compatibility Vista SP2, as Administrator). Restart.
14. Install HTC SHIFT shagctrl_1[1].2.6.122-control center (Compatibility Vista SP2, as Administrator). Do not Restart yet.
Install also HTC SHIFT ClearSnapVUE (Compatibility Vista SP2, as Administrator).
Before Restart, go to msconfig and disable Shift Control Center to start on Windows 7 boot. Then Restart.
15. Right Click on Synaptics Pointing Device in the tray of Win7 -> Pointing Device Properties -> Device Settings ->
Synaptics Touchpad V 6.5 -> Settings -> Buttons -> Scroll Down Button Action -> Run a program of your choosing -> C:\Program
Files\HTC\ResolutionSwitchLauncher.exe -> Apply. Scroll Left Button Action -> Run a program of your choosing -> C:\Program
Files\HTC\ControlCenterLauncher.exe -> Apply.
16. Go to Device Manager -> Monitors -> Generic Non-PnP Monitor -> Disable (or Unistall, but the next time Shift Restarts,
Win7 Will install again the Driver).
17. Push the Buttons for Shift Control Center or Resolution Changer, they are working fine (at least on my Shift). Only the
Brightness Buttos don't Work, for now. Enable Wi-Fi.
Do not install the patch from HTC for the Sidebar. It works fine in Win7.
18. Go to WinMo Side, if you have Liberated them -> Usb Tool -> Attach to Vista -> Go to Win7 Side -> Let Win7 to Search for
the Driver Online. After Finishing, you can Control the Modem too, from Shift Control Center, like in Vista.
19. Go to Windows Update and choose to Update some of the Device Drivers of the Shift, with no fear.
20. If you want Origami Experience 2.0 for Windows Vista, you can download it from here (no www after the 2 //,
download.microsoft.com/download/1/c/e/1ce7294b-fd7a-4159-bc11-7595070bffd8/OrigamiExperiencePackv2.msi). Install
(Compatibility Vista SP2, as Administrator). It works fine, but it does not make update in the weather option, at least to
me.
From my testings with no results, as i was reading several posts on the forum (Do not install C++ Redistributable 2005,
change language to Chinese etc.) for Shift Control Center in Win7, by accident i went on the folder Program Files\HTC and i
pushed manually to run ResolutionSwitchLauncher.exe. Then i had a message that the driver has changed. From this point i
started to look something about monitor settings.
If someone else from now on, find a solution for the monitor driver, so we can again make functional and the Brightness
Buttons, please inform me.
Greetings from Greece and thank you for your helping site.
P.S1 : I have not yet made WinMo side full Functional (GPS, Real VGA etc), because i do not understand exactly how to first
backup my original ROM. I only have liberated it with MoDaCo way. If someone can, please give me instructions to backup for
sure my original ROM first.
P.S2 : I Tested another thing too, on my Shift (see post 155 on forum.xda-developers.com/showthread.php?p=5450784).
I write there : I have the same Transcend External HDD from last summer, but only yesterday I had the time to make the
change. But I have the same problem that was mentioned in some posts before, the Bios recognizes the disk as 120GB, but when
you try to boot, it says "Primary Master Hard Disk Error". I boot from an Acronis Bootable Flash Disk 16GB, where I Have my
image od Vista with all my progs, but either the Acronis SWs do not Recognize the HDD (Toshiba MK1231GAL). The message is
"Failed to read from the sector 0 of hard disk 0". I had understood that something was wrong from the summer, because all the
Acronis SWs on my Notebook did not recognized the External Transcend HDD, eventhouth you see it in Windows (format, make
partitions, copy, delete things). Have you managed to boot any Operating System from that HDD (after you put it inside HTC
Shift) ??
See something interesting, on some sites as i was searching on Google, it says that MK1231GAL but with Part Number HDD1813
(like mine) is ATA7.
But here (02) : It says that MK1231GAL but with Part Number HDD1811 (not like mine) is ATA3-ATA4 compatible.
Does anyone know what is going on to inform me, please ??
Thanks you very much POWERSER !!!
thanks alot,
maybe you can write in bold, that the synaptics driver is from their side.
i was searching on htcs support side but there is just vers: 10[1].0.11.1
I followed all steps and now i have a fully functional SCC (except the brightness control of course). I am very pleased now with the shift.
Thanks for the instructions !
right now i am downloading all the stuff ..... hehe .
Hope Win 7 is going to do the trick . kinda tired of Vista
i think better is use us the synaptics from HTC vista download drivers,because work the boutons in the right side of the tablet
i work perfect with another instructions
thank you
Brightness control is active in win7 adjust? or not is possible up or down brightness?
PD: Edit to say to all that after update windows with all updates, brightness funtion is full in control center. All funtions of HTC Shif are OK with this guide, only change synaptics, i install HTC driver. My probes are with windows 7 starter and windows 7 ultimate x86.
Best Regards.
be-careful updates installation because make lot of problems
like to not work htc control center again or touch screen
maybe do not install optional update is solution !!
but the BIG problem is limited access with WI-FI connection to Internet
esykas said:
be-careful updates installation because make lot of problems
like to not work htc control center again or touch screen
maybe do not install optional update is solution !!
but the BIG problem is limited access with WI-FI connection to Internet
Click to expand...
Click to collapse
beware especially for the updates for .NET ... I think these cause the problem with Control Center [not working]
I backed up after each update installation...
problem with ssd
I had several problem with my SSD runecore. Couldnt install win 7, win 8. Installer gives me error to not format disk. It solved puppy linux http://www.puppylinux.com for me. I boot up in from usb, run gparted. Now i have win 8 on it and cant open Shift for ssd
POWERSER said:
01. Make a Clear Installation (Format, Boot from DVD, Install WIN 7).
02. Disable Aero Theme.
03. Install Chipset Driver for WIN 7 (Now is V 9.1.1.1025), from Intel Web Site (As Administrator). Restart.
04. Install VGA Driver for WIN 7 (Now is V 15.12.75.4.1930, 02 Oct. 2009), from Intel Web Site (As Administrator). Restart.
05. After is finished the Intel VGA installation, if you want you can enable again the Aero theme.
06. Go to Device Manager -> Monitors -> You will see something installed like Flat Panel Display (never mind, whatever you
will see installed from Win7, right click, update driver, browse my computer, let me pick of a list of device drivers, choose
Generic Non-PnP Monitor, Apply). Restart. Now, you will see some Resolution Choises that appeared.
07. Install HTC SHIFT ECD Device Driver for Vista (Compatibility Vista SP2, as Administrator).
08. Install HTC SHIFT Touch Screen Driver for Vista (Compatibility Vista SP2, as Administrator). Restart.
09. Install Synaptics Micropad Driver for WIN 7 (Now is V 14.0.3C for XP32/Vista32/Win7 32 Bit Signed Default), from Site
Synaptics (as Administrator). Restart.
10. Install Realtek High Definition Audio Driver for WIN 7 (Now is V R248 x86 Vista/Win7), from Realtek Web Site (As
Administrator). Restart.
11. Install HTC SHIFT Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0, for Vista (Compatibility Vista SP2, as
Administrator). First Driver, then the Program. Restart.
12. Install manually from Device Manager HTC SHIFT Extension Kit USBLanDriver(3[1].8.3.7).
13. Install HTC SHIFT Marvell Wifi driver 8[1].114.123.139 (Compatibility Vista SP2, as Administrator). Restart.
14. Install HTC SHIFT shagctrl_1[1].2.6.122-control center (Compatibility Vista SP2, as Administrator). Do not Restart yet.
Install also HTC SHIFT ClearSnapVUE (Compatibility Vista SP2, as Administrator).
Before Restart, go to msconfig and disable Shift Control Center to start on Windows 7 boot. Then Restart.
15. Right Click on Synaptics Pointing Device in the tray of Win7 -> Pointing Device Properties -> Device Settings ->
Synaptics Touchpad V 6.5 -> Settings -> Buttons -> Scroll Down Button Action -> Run a program of your choosing -> C:\Program
Files\HTC\ResolutionSwitchLauncher.exe -> Apply. Scroll Left Button Action -> Run a program of your choosing -> C:\Program
Files\HTC\ControlCenterLauncher.exe -> Apply.
16. Go to Device Manager -> Monitors -> Generic Non-PnP Monitor -> Disable (or Unistall, but the next time Shift Restarts,
Win7 Will install again the Driver).
17. Push the Buttons for Shift Control Center or Resolution Changer, they are working fine (at least on my Shift). Only the
Brightness Buttos don't Work, for now. Enable Wi-Fi.
Do not install the patch from HTC for the Sidebar. It works fine in Win7.
18. Go to WinMo Side, if you have Liberated them -> Usb Tool -> Attach to Vista -> Go to Win7 Side -> Let Win7 to Search for
the Driver Online. After Finishing, you can Control the Modem too, from Shift Control Center, like in Vista.
19. Go to Windows Update and choose to Update some of the Device Drivers of the Shift, with no fear.
20. If you want Origami Experience 2.0 for Windows Vista, you can download it from here (no www after the 2 //,
download.microsoft.com/download/1/c/e/1ce7294b-fd7a-4159-bc11-7595070bffd8/OrigamiExperiencePackv2.msi). Install
(Compatibility Vista SP2, as Administrator). It works fine, but it does not make update in the weather option, at least to
me.
From my testings with no results, as i was reading several posts on the forum (Do not install C++ Redistributable 2005,
change language to Chinese etc.) for Shift Control Center in Win7, by accident i went on the folder Program Files\HTC and i
pushed manually to run ResolutionSwitchLauncher.exe. Then i had a message that the driver has changed. From this point i
started to look something about monitor settings.
If someone else from now on, find a solution for the monitor driver, so we can again make functional and the Brightness
Buttons, please inform me.
Greetings from Greece and thank you for your helping site.
P.S1 : I have not yet made WinMo side full Functional (GPS, Real VGA etc), because i do not understand exactly how to first
backup my original ROM. I only have liberated it with MoDaCo way. If someone can, please give me instructions to backup for
sure my original ROM first.
P.S2 : I Tested another thing too, on my Shift (see post 155 on forum.xda-developers.com/showthread.php?p=5450784).
I write there : I have the same Transcend External HDD from last summer, but only yesterday I had the time to make the
change. But I have the same problem that was mentioned in some posts before, the Bios recognizes the disk as 120GB, but when
you try to boot, it says "Primary Master Hard Disk Error". I boot from an Acronis Bootable Flash Disk 16GB, where I Have my
image od Vista with all my progs, but either the Acronis SWs do not Recognize the HDD (Toshiba MK1231GAL). The message is
"Failed to read from the sector 0 of hard disk 0". I had understood that something was wrong from the summer, because all the
Acronis SWs on my Notebook did not recognized the External Transcend HDD, eventhouth you see it in Windows (format, make
partitions, copy, delete things). Have you managed to boot any Operating System from that HDD (after you put it inside HTC
Shift) ??
See something interesting, on some sites as i was searching on Google, it says that MK1231GAL but with Part Number HDD1813
(like mine) is ATA7.
But here (02) : It says that MK1231GAL but with Part Number HDD1811 (not like mine) is ATA3-ATA4 compatible.
Does anyone know what is going on to inform me, please ??
Click to expand...
Click to collapse
Mine is under update mode now approximate 145 updates including .net frameworks.
I am using Windows 7 Ultimate. Lets wait for the windows update wizard to get completed
Sent from my GT-N7000 using xda app-developers app
All looks good even after complete updates
Sent from my GT-N7000 using xda app-developers app
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Sounds like you're running a 64bit Win7. That won't work! (unless mabee virtual)
basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)
d-two said:
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)
Click to expand...
Click to collapse
Oh, yes. I remember reading it. OK, I'm getting old!
where factory apps come from - ms_.nbf -
basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
you will need the stuff from this post -
http://forum.xda-developers.com/showthread.php?t=648067
install - ER2003Edit_1_4_26.msi on pc
it will enable you to be able to open the ms_.nbf
the ms_.nbf needs to be put in the same folder as
HimaUpgradeUt_noID.exe
nk.nbf
ms_.nbf
when upgrading.
the ms_.nbf is where all the old factory programs are coming from its known as the EXTROM.
it houses programs that the factory thinks that should always be installed but not uninstalled by the public, thats why they do not appear in remove programs tab.but we do not need a lot of this stuff as we are now running WM 6.5.
the ms_.nbf that is here -
http://forum.xda-developers.com/showthread.php?t=648067
has already been cleaned of any factory placed program .cabs so you can use that one straight off,it does contain 2 splash images that you could change?
its best not too have any .cabs in ms_.nbf as you will then be able to do this -
http://forum.xda-developers.com/showthread.php?t=332215
hope helps,let us know how u got on....
still having problems with update
hi advanced'
thanks for the help' what ive done was downloaded all thos programes you advised me to.
extracted them to my desktop' installed the one that opens the rom image.
opend the rom image had a look it said i was on o2 but ive unlocked it to my network orange, but i didnt change anything just save the image and came out of the programe.
then i opened windows mobile connected my xdall to it and created a new folder in games called smart, i then copy the ms file and the himaupgrade to this folder.
which ever way i try to run this ie from my windows mobile sysc, i get the same message first it says about update and delete my old software, goes through the checking stage then says update has a problem please take out usb and soft reset device and try again.
and if i try to run it from my mobile it says there is no application associated with ms_ run the application first then openthis file from within the application.
this is driving me up the wall, also i am using windows 7 might that be a problem.
many thanks
basicbri
the HimaUpgradeUt_noID.exe was never made to run on win7 that why we have too tweek.
follow this its for xp/vista but also applies for win 7 -
http://forum.xda-developers.com/showthread.php?t=428469
when all hooked up ie. device in bootloader (you cannot update in win mobile it needs to be in bootloader mode)and all ready to run, make sure u have all 3 files in same folder on desktop pc not win mobile device...
3 files are -
HimaUpgradeUt_noID.exe - update app
nk.nbf - actual win mo 6.5 rom image
ms_.nbf - extrom image
the ms_.nbf can be opened with ER2003Edit_1_4_26.msi and just delete the o2 option from the 2 drop down and type in ORANGE then go - file - save ROM image - exit
after update app has finished make sure you do this before you start up device for first time -
Select the options as follows:
(for selecting use Record Button, change values with Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad/Action Button and wait until OS starts.
follow the update instructions for xp on here -
http://forum.xda-developers.com/showthread.php?t=428469
even though you are running win 7 its the same,where it differs is the actual driver install,follow the guide for vista for that..
post how ya got on
thanks for your help but
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri
or use the xda dev search function ???
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...
basicbri said:
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri
Click to expand...
Click to collapse
And i say again look in my HowTo!!!
advanced15 said:
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...
Click to expand...
Click to collapse
thanks for using my version!
flyboyovyick said:
thanks for using my version!
Click to expand...
Click to collapse
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
It should not sync, to be clear.
aeroflyluby said:
It should not sync, to be clear.
Click to expand...
Click to collapse
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
If you have 32 bit windows 7 download attachment from this post http://forum.xda-developers.com/showthread.php?t=428469
unpack it anywhere but remember where it's unpacked, desktop for example.
Then put hima into bootloader mode and into crandle.
Then click on PC :
Start > Right Mouse Click on Computer > in the left you should see Device Manager link, click on this > Go to Portable Devices or something like that, there should me USB Sync or something like this > Click right mouse on it and tap Update driver > Select Browse my computer blabla > click on Let me choose someting blabla, this second option > Click DISC button > Navigate to folder where you opened this and open wceusbsh blabla > select Microsoft USB Sync or something on the list and click next > install driver > Run update and flash, lol
basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
And again look in my howto's there is an description for Vista/Win7 32/64Bit
basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
there will be NO icon or message in win 7 that device is connected as long as you have USB at the top of device screen that lets you know it is connected....
hi advanced'
this himalaya xdall is still giving me problems'
ive done all of these' links and downloads to up date this mo fo' but without any luck.
this has been slowly driving me up the wall, even though i have followed to the letter everything page by page.
i dont think this is going to work on windows 7'
my usb icon bottom right of my screen is showing a green and white tick that indicates that my pda is conected but not in the my computer screen, even after i followed the information.
im also getting error 101 on the himalaya ungrader, as i said before what about flashing from my sd card thats got to be worth a try.
also i would like to hear from another members that have upgraded the xdall himalaya with windows 7.
but i do think this alas is not ment to be' my destiny is drawn towards my daughters god awlfull pink mobile.
SAVE ME FROM THIS IT IS NEARLY CHRISTMAS
cheers basic
p/s anyone have any ideas you can email me on
[email protected]
it does work on win 7...done it this end load of times
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....
advanced15 said:
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....
Click to expand...
Click to collapse
It's ok to update without windows mobile center, you need just driver.
basicbri, if you followed my guide, you can't fail. It's really impossible to con't get it work with my manual. Try again, even if you didn't yet