Database Develop

Help Please, BlueAngel not booting up, not able to upgrade

I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?

Re: Help Please, BlueAngel not booting up, not able to upgra
todixy said:
I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?
Click to expand...
Click to collapse
Do you have activesync 4.1 installed?
And beware that windows firewall may cause some problems too.. so turn it off before you start upgrading just to be sure.

one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful

xykosomatik said:
one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful
Click to expand...
Click to collapse
I remember closing those processes when I made my first flash... but look at the wiki from TuMa 1.2 for example:
"Flash the ROM.
* If your device is not recognized, make sure you use a fresh Windows XP SP2 or Windows 2000 SP4 installation with Active Sync 4.1."
But it's also true that it may not apply in this case. Anyway.. just trying to help.

Noobs Definite Guide to Himalaya Updating [XP/VISTA]

Hello All, many of you just keep asking how to do that and this, you do not use search, so im making this Guide which will help you
Things You Should Know:
Things Which Will not work after Upgrading to WM5, WM 6 or WM 6.1 :
Htc Himalaya Backpack (read below)
STK will Not function
There is no SDHC Drivers for any Version of ROMS for HTC Himalaya Yet
To Have 30.53 MB of storage Go here
Upgrading:
Windows XP :
Requirements :
Windows XP
Microsoft ActiveSync 4.5
Minimum of 256 MB of RAM
and some patience
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release Reset Button, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
Place your device in the cradle/USB Cable, ensuring that the cradle/USB
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle/USB.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt_noID.exe and follow the instructions
Sit back and wait for the Congratulations screen to be displayed
on your PC.
Your device will still be displaying 'Upgrading radio stack, please wait' but as long as the PC says it is done, then its all OK.
Detach your device from the cradle/USB.
Now you have to hardreset your device :
Press Reset Button and hold down Camera Button + Record Button.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use Record Button, change values with Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad/Action Button and wait until OS starts.
Click to expand...
Click to collapse
Windows Vista 32-Bit :
Requirements :
Any Version of Windows Vista 32-Bit
Windows Mobile Device Center (Latest Version)
and a little computer knowledge
Before starting: Your device needs to be connected to the PC, and in BOOTLOADER mode.
Step 1 of 16: Extract the attached zip file to a memorable location on your machine (e.g. the desktop). This is the Activesync 4.5 RTM USB driver.
Step 2 of 16: Run 'Windows Mobile Device Center', and click 'Connection Settings'.
Step 3 of 16: Uncheck the 'Allow USB Connections' box, and select 'OK'.
Step 4 of 16: Run 'Services' by clicking the Start Orb and typing 'Services', and ensure the 'Windows Mobile-based connectivity' and Windows Mobile 2003-based connectivity' services are started. If they are not, click the service name and press the 'play' button on the top bar.
Step 5 of 16: Load 'Device Manager' by clicking the Start Orb and typing 'Device Manager'. Expand the 'Mobile devices' section and click the 'HTC USB Sync' (or similarly named) item.
Step 6 of 16: Click the 'Action' menu and select 'Update Driver Software'.
Step 7 of 16: Click 'Browse my computer for driver software'.
Step 8 of 16: Click 'Let me pick from a list of device drivers on my computer'.
Step 9 of 16: Click 'Have Disk'.
Step 10 of 16: Click 'Browse', and browse to the location where you extracted the ZIP file in Step 1.
Step 11 of 16: Double click 'wceusbsh.inf'.
Step 12 of 16: Select 'HTC USB Sync' from the list, and click 'Next'.
Step 13 of 16: Wait while your driver is installed.
Step 14 of 16: Run 'Task Manager' by clicking the Start Orb and typing 'taskmgr'. Then find the 'WMDC.EXE' item, and click 'End Process'
Step 15 of 16: Install your update! Everything should now run fine! You just need to bear in mind the final step when you want to start syncing normally again...
Step 16 of 16: In 'Windows Mobile Device Center', re-enable the 'allow USB connections' checkbox you disabled in Step 2.
Click to expand...
Click to collapse
If MODS find this Helpful, Please Sticky This
muckelmaus Wrote :
As I tested some ROMs with my himas. Only the CF-slot will not work, 'till someone will write a working driver for it.
There are no probs to use the backpack battery and the vga-video funktion, so far. Two out of three, thats not bad, I think.
Click to expand...
Click to collapse

Backpack problem
Things Which Will not work after Upgrading to WM5, WM 6 or WM 6.1 :
* Htc Himalaya Backpack
As I tested some ROMs with my himas. Only the CF-slot will not work, 'till someone will write a working driver for it.
There are no probs to use the backpack battery and the vga-video funktion, so far. Two out of three, thats not bad, I think.

thanks for the info, i havent tested it my self thats why i didnt knew, edited the First post with this info

Im a noob
Hi I am a noob and followed this guide but it did nothing...
Basically I have a 02 XDA II - it is locked and I want to upgrade it to windows 6/6.1 - I have been reading through the forum for a couple of hours now covering the wiki for himalays and other things.
I followed the steps on this - but nothing has been upgraded. So I guess this isn't how to upgrade to wm6?
So frustrating cos I can't seem to find the instructions on how to do it.
I believe its a rom i need right?> how do i put it on?
Should I unlock the xda first? (havent worked that out yet) or upgrade to wm6 and then it will be unlocked anyway?
Please please help I have been reading loads and trying to not ask obvious thigns.

i donot know if its SIM locked or not...try givinf xda2unlock a try
second, to upgrade you need a ROM, there are MANY roms in this Himalaya WM6 Forum...many of them have detailed instructions
it wont be any harm if you upgrade first...try giving it a shot and tell me
Ather

I have also performed 'Unlock Wiz/Himalaya' but all I get is 'The phone seems unlocked already' - but it is not unlocked - any advice with this also?

try to upgrade the rom simply, if u get stuck, we all are here

I am struggling through trying to work out how to unlock my sim and then flash WM6 onto my 02 XDA ii which therefore is a himalya - says PH10b in model no.
Anyway Im following one of the guides (http://wiki.xda-developers.com/index...0for newbies) and it says I have to establish whether it is a G3 or G4 or else Ill brick it and probably throw myself out of my window.
So I performed a soft reset and got the following information in red letters when I do it.
R 1.10.00
G 1337. 18
1.60.00WWE
I just don't know if it is a G3 or G4 and can't afford to brick this phone - so please could someone help me so I know which intructions to follow?
I will send best reply a stick of rock from Blackpool (famous for rock - its like sugary concerete).

Sorry to be unclear - it is sim locked - it has horrible 02 logos all over it.
Bastards.
Anyway it is sim locked and wm 2003 i think.
Im not clear about how to install a rom - i did update the drivers putting it in boot and then updating driver from what i downloaded - which I think was to resolve and issue with vista/xp as i am using vista.
Right now im trying to work out G3/G4 because i found what seemed to be a good instrucitonal post

lol, the xda2 doesent has g3 or G4 ... so flash away

So how do i unlock it and then install WM6?
Is there a step by step guide?

It is sim locked and i want to unlock it and install wm6

the Branding has nothing to do with the Simlock, my Himalaya is from O2 too, and all it had was Branding, no simlock.
I'm currently using E-Plus as my Provider, and i did not have to circumvent any simlock before flashing WM6.1 onto the Device.
Also, if it DID have a Simlock, it has probably worn off by now, since the Device is already older than 2 years...

I have managed to unlock the sim now thanks to the wonderful people here but still have no clue how to install wm6?

congrats , just download any ROM and enjoy flashing it

do i just download a wm6 file and put it onto my pda and then execute it? double click it? is it that simple?

Can u spefically tell me how to implement a rom?
i assume i download it but then what?
I am thinking I'll just brick it - then spend months on here asking for help... Id rather just ask beforehand and find out how to do it.

it's exactly like ather said, you downloaded the ROM, now you can flash it to your XDA.
Just do it like it says in the Readme and you should have no Problems whatsoever

Strange
I had an old Qtek 2020 and flashed it successfully to WM6.1 No problems exept...... the phne does not conect to the correct provider. The SIM is for the Belgian BASE provider whereas it connects always to ORANGE. When I put the SIM in my new Diamond or in my very old Nokia phne it connects to BASE as intended. I reflashed to the original Qtek WM 2003 SE and same thing. Reflashed again to WM6.1 ans still it only wants to connect to ORANGE ??? What am I overlooking?
BTW if I donload the list of providers there isno BASE provider. If I download the list on my Diamond it appears whithout any problem.

it could be because of the Network Manager has old settings, try setting it up manually

Help...Can Not upgrade my O2 XDA IIs to either WM5 or WM6

Gentlemen
I am new here, in the past 1 week, I have read a lot documents here, thanks to you guys create such a wonderful forum and great articles, I also download a lot of file from here try to upgrade my XDA IIs to WM6, tried so many times on different version, but all failed.
Here is my XDA IIs info, hope someone here can give me a hint on what's the problem and how should I fix it... Thanks
Windows Mobile 2003 second edition, Version 4.21.1088 (Build 15045.2.6.0)
ROM Version: 1.40.00 WWE
ROM Date: 03/10/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: 1.40.923 WWE
CPU: Intel PXA263, speed 400 MHz
RAM SIZE: 128MB
Flash size: 32MB
Flash chip type: 28F128K3
Data bus: 32 bits
Storage size: 43.26 MB
Thanks a lot

i have the same problem too..can anyone please help us out..wanted to upgrade from WM2003 to either WM5 or WM6 so i can put some of those iPhone theme on my phone..thanks in advance..(my phone details below)

?
thats messed up nobody responds cuz i was thinking about update myself but was worried i'll mess up major

window mobile 6.1 for xda lls
vfan3388 said:
Gentlemen
I am new here, in the past 1 week, I have read a lot documents here, thanks to you guys create such a wonderful forum and great articles, I also download a lot of file from here try to upgrade my XDA IIs to WM6, tried so many times on different version, but all failed.
Here is my XDA IIs info, hope someone here can give me a hint on what's the problem and how should I fix it... Thanks
Windows Mobile 2003 second edition, Version 4.21.1088 (Build 15045.2.6.0)
ROM Version: 1.40.00 WWE
ROM Date: 03/10/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: 1.40.923 WWE
CPU: Intel PXA263, speed 400 MHz
RAM SIZE: 128MB
Flash size: 32MB
Flash chip type: 28F128K3
Data bus: 32 bits
Storage size: 43.26 MB
Thanks a lot
Click to expand...
Click to collapse
-------------------------------------------------------------
i already upgrade my xda lls to window mobile 6.1 and im very like this new roms..before this im planning to sale my xda.but since i use this new roms,i dont want to sale it anymore.thanks to master phoenix to pose the roms at him blog. You must have usb or cradle to do this.just follow the instruction there very2 carefully.
download here :
Go to http://pinoytopdownloads.blogspot.com
you can also go to this forum to see another review
http://www.gsmarena.com/o2_xda_iis-reviews-933.php
good luck
[email protected]

spyrgyro said:
i have the same problem too..can anyone please help us out..wanted to upgrade from WM2003 to either WM5 or WM6 so i can put some of those iPhone theme on my phone..thanks in advance..(my phone details below)
Click to expand...
Click to collapse
----------------------------------------------------------
i already upgrade my xda lls to window mobile 6.1 and im very like this new roms..before this im planning to sale my xda.but since i use this new roms,i dont want to sale it anymore.thanks to master phoenix to pose the roms at him blog. You must have usb or cradle to do this.just follow the instruction there very2 carefully.
download here :
Go to http://pinoytopdownloads.blogspot.com
you can also go to this forum to see another review
http://www.gsmarena.com/o2_xda_iis-reviews-933.php
good luck
[email protected]

I don't know if I toasted my XDA
I have an XDA IIs. The biggest problem I think that I made was to use Windows Mobile center since I am using a Windows Vista OS.
I was about to install the windows 6.1 from pinoytopdownloads when suddenly, it stopped and continuosly displayed Serial......version 2.07.
Did I toast my ROM or did it just become blank because Windows Mobile Center disconnects once the phone started changing it's OS?
I have not tried checking if activesync 3.7 on a Windows XP application can still recognize the O2 Xda IIs in that state.
If anyone can guide me or give help regarding this, I will greatly appreciate it. thanks.

try using XP with active sync 4.5 and start the process from the top, hard reset first your BA and put it in bootloader mode...that should work

Upgrading Blue Angel using Vista (without Mail Button)
Hy everyone,
Yesterday I had a bit of a struggle trying to upgrade my SPV M2000 (aka Blue Angel) but in the end it worked.
As you guys are having some trouble too, I'm going to post the way I did it and hope that it works for you as well..
Note I: This steps worked for me but there is no guarantee that they will do so for you too and everything you try is at your own risk. However I am sure, you are all aware of this and really hope that this is going to help you.
Note II: My Laptop runs Vista Business, my BA WM2003 non-SE. I modified the installation process as the mail button on my BA is not working anymore, preventing me from following the normal instructions found in the wiki.
First of all (Prerequisites):
- Ensure Windows Mobile Device Center (WMDC) is installed and updated to the most recent version. The latest version is 6.1 which worked fine for me.
- Get the drivers for the BA, to be found in the wiki
- Get MTTY 1.4.2, attached to this post
- Get the ROM you want to install, I used Sun Dream's WM6.1 which can be found in the wiki as well
Now, to the task:
To begin with we can follow the instructions given in the wiki for ugrading to wm6 using vista, so I'll just copy&paste those steps from there:
4. Put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button.
5. Connect the phone to the sync cable/cradle USB. (Now you can see "USB" at the top of your display and numbers (2.06 or 2.07 at the bottom) You may need to remove SD/MMC (memory) card
6. Now navigate into the WMDC (Start -> All Programs -> Windows Mobile Device Center)
* Click on the "connection settings" menu icon
* In the connection settings menu uncheck "allow USB connections" then press OK.
* Now exit the WMDC and return to the desktop
7. Go into the start menu and type "Services", this will take you into the local services dialogue and show a list of all services either running or registered with your pc.
* Scroll down the list and make sure these services are present:
* Windows Mobile-based connectivity
* Windows Mobile 2003-based connectivity
* If these services are not started then double click each one and set them to Automatic start by clicking the "startup-type" drop-down menu and selecting automatic then click the start button in the same window, apply the setting by pressing OK.
* Return back to the desktop again
8. Go into the start menu and type "Device Manager" then run, this will take you into the device manager.
* Click the "+" symbol next to "Mobile Devices" and double click on "HTC USB Sync". (Note: In my case this was labelled "Microsoft USB Sync")
* This will bring up the properties of the currently connected device.
* Go to the "Driver" tab and click "Update Driver".
* Click "Browse My Computer for Driver Software".
* Select "Let me pick from a list...."
* Click the "Have Disk" button.
* Click "Browse" and navigate to the AS_DRIVERS folder we created earlier.
* Now select your file
o Vista 32bit users select the file "wceusbsh.inf"
o Vista 64bit users select the file "wceusbshx64.inf"
* Then click Open.
* Click next and the driver will be installed (wait a moment).
* Press close and escape back to the desktop now.
Click to expand...
Click to collapse
Next Steps, different from those described in the wiki:
9. Go to the task manager and kill the wmdc.exe process
10. Run MTTY; select the USB option from the dropdown list
- There is also a USB button but the instructions I found said NOT to use it, so I did not test it
- Apparently, the option could also be called something like WCEUSBSH001, but always has to contain USB. In my case it just said USB
- If you do not get a USB option something is not connected correctly, ie it will not work with the stock drivers Vista uses
crabiorc said:
(Leave default parameters: 8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No)
Click OK
Run following commands:
- [press enter first to get USB> prompt]
USB>
- Type "set 14 0" without the quotes to tell bootloader to boot the OS after reset. (then hit Enter)
USB>set 14 0
HTCST ÚÈHTCEUSB>
- Type "task 28" to get your device formatted (hit Enter and wait for a little)
USB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
- Type "task 0" to ask your device reboot (hit Enter)
USB>task 0
USB>
Click to expand...
Click to collapse
Next Steps:
11. Take the phone off the cradle. I am not absloutely sure anymore, but I think it still was in bootloader mode at that point. If that is the case just soft reset the device.
- When the device has rebooted it will ask you whether to flash some settings (can't remember which..) about 3 times. Just answer no to all of them.
12. Restart WMDC and re-allow USB connections (under connection settings)
13. Reconnect your device to the cradle and start Active Sync on the Blue Angel
- Make sure your device is shown as "connected" in WMDC
14. Start the ROM installation.
Note: Using "BaUpgradeUT.exe" resulted in a Device ID error. In this case you have to use a version which does not check the ID codes. I used the version attached to this post
15. When the installation is finished, the dialogue on the computer says to cold boot (hard reset) the device.
- If your mail button is not working, just soft reset the device (what I did)
- If your mail button is working you may attempt this. (Please report back!)
I have not yet gotten through really testing the device and I never had a WM6.1 device before, thus no basis for comparison. From the first impressions the soft-reset at the end did not cause any problems and everything seems to be working fine.
16. You're done
Whew, this has gotten rather long. If this instructions work for you, please let me know!
As there seem to be several BAs out there where the mail button doesn't work this might be a useful addition to the wiki.
However, I will not post it there without some feedback whether it works for others as well..
(I hope there aren't to many mistakes in the text; I am not a native speaker)
Final Note:
This is not my work, all the steps described above were found on this forum and on the wiki pages. I just did the job of combining them in a way that worked for me.
My biggest thanks to:
- crabiorc
- ramram
- sp3dev
- all the people who contributed to the wiki pages
Best wishes,
Dipak

is it ok downgrade from wm6.5 to wm6.1?

blueangelkoe said:
is it ok downgrade from wm6.5 to wm6.1?
Click to expand...
Click to collapse
Yes. If you feel more comfortable on a specific ROM it is always ok to downgrade or upgrade.

Upgrade XDA IIs to WM6.5
My XDA IIs just froze when resetted earlier and it was running on WM6.1 so I started to wonder if it had totally died. As I mainly leave it in the car and use it for satnav I was considering now buying a tomtom.
Then thought if its dead trying to revive it cant hurt so I found the following link (http://pinoytopdownloads.blogspot.com) to download a zipped file claiming to be WM6.5.
Opened the file and did a hard reset on devicethen sync with PC. Ran the programe which looked farmiliar from previous updates I had used so thought it might work. Half hour later, my XDA IIs came back to life running WM6.5 and none of my data such as text and contacts were lost at all.
It lives again.
Waiting for the HTC Touch Pro2 to see if it lives up to its hype and then can use my PDA as a phone again too cos lets face it... the XDA IIs is a bit of a lump now!
http://pinoytopdownloads.blogspot.com

Nice to hear that your BA is kicking again

Billy B said:
My XDA IIs just froze when resetted earlier and it was running on WM6.1 so I started to wonder if it had totally died. As I mainly leave it in the car and use it for satnav I was considering now buying a tomtom.
Then thought if its dead trying to revive it cant hurt so I found the following link (http://pinoytopdownloads.blogspot.com) to download a zipped file claiming to be WM6.5.
Opened the file and did a hard reset on devicethen sync with PC. Ran the programe which looked farmiliar from previous updates I had used so thought it might work. Half hour later, my XDA IIs came back to life running WM6.5 and none of my data such as text and contacts were lost at all.
It lives again.
Waiting for the HTC Touch Pro2 to see if it lives up to its hype and then can use my PDA as a phone again too cos lets face it... the XDA IIs is a bit of a lump now!
http://pinoytopdownloads.blogspot.com
Click to expand...
Click to collapse
Billy B:
I just bought an 02 XDA IIs. I love it but the bluetooth doesn't work with my Motorola S9 stereo headset unless it's 6 inches from my head. Does your XDA IIs work with stereo bluetooth? Have you tried it with WM6.1? I'd like to know.

Upgrading to WM6.1, Etc.
For all you upgrading Blue Angels to WM6 and high, you need to read the Wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel. Read Blue Angel for beginners and also the upgrading to WM5 and WM6. You'll learn that you can free up some memory being used for the Extended ROM among other things.

I am new here, and this is my first rom flash. I have an O2 XDA lls that was given to me by a friend on WM2003. On XP, following the instructions on the wiki, I have tried with several roms. The flash seems to work, but then as soon as I reset the phone I am back in WM2003. Instead of a striped boot screen, I simply see an O2 logo, and when using the key combinations, I get no debug options.
Anyone have any ideas?

well did you flash a proper rom or maybe just a radio rom, meaning just an upgrade on wireless tech, because that process would "feel" like flashing a rom but actually doesn't change the OS

I don't really know. But I used the roms on this page:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4
if that helps. I also used one off the helmi_c to check it wasn't a dodgy rom. DO you have any specific one to recommend? When I downloaded and unziped the rar, I simply ran the upgrade file within which started a wizard which said it would upgrade my pda. Strangely, the wizard did not display any information about the pda on the screen which tells you the rom info. Is it possible that it is not being detected? Do I need to install some extra drivers on XP?

it is perfectly normal that this upgrade tool does not show all the information like an official upgrade would, first of all, that is because these are cooked roms, meaning you only upgrade the OS, not the protocol, radio and extrom. that would be baked roms. but anyway, also, that the device's current information is not fully shown or not shown at all is normal, as you are probably using the MAupgradeut_noID.exe in contrast to the original BAupgradeut.exe, just by the first two letters (and the giant picture in the wizard) you can tell that this upgrade tool is actually for the magician, but works best for BA.
for recommendation:
http://forum.xda-developers.com/showthread.php?t=482997
the R6.1 release on that site is the newest real release, meaning you can get full further support, the download links work...
Don't get fooled by the R6.1, we are still talking about wm6.5, it is just the xplode release number.
P.S. no extra drivers needed, just use the wiki wizard word by word and it will work

The same thing happens again. Using the ROM upgrade file, it all seemed to work, and then when I attempt to do a hard reset, I get no stripes, just an O2 logo, and no boot options. I am then returned to Wm2003. Maybe I will try on another computer.

it's nice, but there is some application lost.
i've upgrade my xda 2s to WM6 cooked by HELMI, i download from http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista and look powerfull, its nice, but there is some application lost that i need. there is'nt auto config and xBackup...some one can help me to get that application??....thank's.....

Updated guide to installing win7 on your shift.

This is just an updated version of deadnex's original guide, with a few things thrown in from various people who have found what works and what doesn't.
This guide has been used and tested as effective with the windows 7 rc 7100 build.
Step 1 - Go here http://www.microsoft.com/windows/windows-7/download.aspx and download Windows 7. You can get a key from the same place, so don't worry about not having a key.
In the event that the servers aren't offering the download {due to server issues} you can download a current version through a torrent site. I recommend mininova as it's the most legitimate of the bunch.
To get a key for windows 7 (32bit) (if you downloaded it through a torrent site), go to this address https://www.microsoft.com/betaexperience/productkeys/win7-32/enus/default.aspx
(64bit)
https://www.microsoft.com/betaexperience/productkeys/win7-64/enus/default.aspx
To clarify this part, you're setting up a usb flash drive or usb card reader and sd card to work as an installation drive for windows 7. I've followed these steps exactly, and found them to be completely accurate. They work, so do each step, and make sure to keep track of your steps so as not to miss one.
Thanks to deadnex for all of this information.
USB-install:
User feedback suggests that doing this next part should be done on a computer running windows vista. In winXP, your usb drive might not show up during the process.
edit (before step 1, create a folder on your main computer called windows7. Don't do this on your shift, and it's recommended to use c:\windows7\ to make the process easier. If you use another location to extract the files to, make sure to remember which directory it is, and adjust the steps of this tutorial to your own location.)
1 - Open the windows7 Iso file with winrar, and extract all the files into C:\WINDOWS7\ (or the folder you created as mentioned above)
2 - Open command prompt in administrator mode (start - all programs - accessories - (right click) Command Prompt and select run as administrator.
3 - Then type these commands without the - and press enter after each :
- CD\
- DISKPART
- LIST DISK
- SELECT DISK X ( X is the memory stick disk number you got from LIST DISK)
- CLEAN (CAUTION; THIS WILL ERASE ALL THE CONTENTS OF THE SELECTED DISK)
- CREATE PARTITION PRIMARY
- SELECT PARTITION 1
- ACTIVE
- FORMAT FS=FAT32 QUICK
- ASSIGN
- EXIT
- XCOPY C:\WINDOWS7\*.* /S /E /F U:\ (U:\ is the name of usb drive you are using for your install, if your drive has another letter, which is most likely, of course put in your own) (after *.* and after each letter preceded by / there's a space!)
OPTIONAL- Include an extra folder on your windows7 usb drive called drivers, and put all the drivers in there that you'll need to get windows 7 running smooth. Drivers are listed just a little further down on the page, so before completing the next step, go there and get the drivers.
WARNING- THIS WILL ERASE YOUR VISTA AND REPLACE IT WITH WINDOWS 7. THIS IS IT!!! Don't worry, win7 rc 7100 is far better anyway. Just to be safe though, backup your personal data before continuing to the next step.
[edit] With a little use and time, I've come to find that windows 7 has a great amount of compatibility issues with certain games. Although I've only had the chance to try a few, there seems to be a trend with win7 being unable to run a lot of older, but still 3d, games. Warcraft 3, and Dungeon Keeper 2, to be more specific. If you're not a gamer, it shouldn't matter, and Windows 7 is still the best choice for you. If you do like to play games, you might want to reconsider changing to windows 7. [edit]
Restart your computer, at startup push FN+F10, and choose your usb drive.
This will take you to the installer, select your language, timezone, and keyboard layout. Next.
In summary, you're going to select Custon (advanced) in the windows 7 installation process, and some card readers (sd to usb) don't work.
This will not affect your HTC SHIFT Vista recovery partition but it will remove Vista itself from your shift. Your settings from Vista will not be carried over to Windows 7.
_________________________________________________________________
DRIVER DOWNLOADS AND INSTALLATION.
Well, once you're through all that, you should be looking at your new windows 7 shift. Now's the fun part! Driver installation!
Go to this link, and download all of the drivers. (10 in total)
http://www.htc.com/www/SupportDownload.aspx?p_id=60&cat=1&dl_id=82
Putting these files on the same flash drive as your windows 7 install makes matters much easier for this time and next time should you need to try again. I also recommend copying and pasting the installation order from the htc site in a notepad or wordpad file and putting that in the same folder as your drivers. That way, when it's time to install your drivers, you can open that file, and use it as a reference to ensure you have the order correct. Chances are that your shift won't connect to the net, right after the win7 installation.
IMPORTANT IMPORTANT IMPORTANT
INSTALL EACH DRIVER IN THE ORDER THAT HTC HAS LISTED ON THEIR DRIVER DOWNLOADS PAGE. DO THIS OR FACE TOTAL DEATHKILL!!! actually, you'll just have driver issues, but that SUCKS!
After many people have responded, I wish to remind everyone. Install all the drivers. INSTALL ALL THE DRIVERS. Install all the drivers. Yes, I said that three times. Although your shift seems to work, when only installing a few, the fact is, drivers like the synaptics touchpad driver also control other parts of your shift, like the two face bottons above the touch pad. If you install one driver, and skip one in between, you mess up the order of installation that is so important, and then force yourself to need an entire wipe and reinstallation of win 7. So, one more time, INSTALL ALL THE DRIVERS FROM HTC.
One more important thing to know about the drivers is, DON'T LET WINDOWS RESET AFTER INSTALLING EACH DRIVER, select RESTART LATER AFTER INSTALLING EACH DRIVER. I REPEAT, INSTALL ALL DRIVERS (IN ORDER) BEFORE RESTARTING WINDOWS.
IMPORTANT When you've finished installing your drivers but still need to restart to take effect, go to your display settings (right click the desktop) and select a non aero theme. save settings after that. Windows 7 Basic is a non aero theme and it looks good. If you leave Aero enabled, your shift will blue screen of death crash when it boots into high res mode.
Windows 7 can not run Aero in high res on the shift. (for now, at least)
When you install the drivers – beware that you have to install them with Vista Compatibility mode enabled and run as Administrator. Right-click the driver setup file – click the Compatibility tab – select Windows Vista and mark “run this file as Administrator”
To save yourself a headache, copy and paste the following list into a wordpad file and place it in the same directory as your driver downloads. Putting this list in the same directory on your win7 flash card means that you can open it on your shift after installing win7 and use it as a reference when installing your drivers. Keep it all together.
EACH DRIVER IS 100% IMPORTANT AND NEEDED, DO NOT SKIP DRIVERS, EVEN IF THAT DEVICE SEEMS TO BE WORKING ALREADY. SKIPPING THE TOUCHPAD DRIVER MEANS THAT THE RESOLUTION AND COMM CENTER BUTTONS DON'T WORK. SKIPPING THE SOUND DRIVER MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN. SKIPPING THE VIDEO DRIVERS MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN.
DON'T SKIP DRIVERS.
Here's the order.
a. VISTA_INTEL Chipset Driver v8[1].3.0.1014
b. Intel VGA driver(7[1].14.10.1461)
c. VistaECDrvV1[1].0.1.10
d. TouchScreen(1[1].1.0.2)
e. Synaptics MicroPad(10[1].0.11.1)
f. Realtek Audio Driver R197(6[1].0.1.5653)
g. Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0 *
h. Extension Kit USBLanDriver(3[1].8.3.7)
i. Shagctrl_1[1].2.6.122-control center
j. Marvell WiFi driver(8[1].114.123.139)
This next part was contributed by Thaihugo. Thank you a ton for this contribution Thaihugo .
To connect the Windows Mobile (your Shift's other OS) side to the PC side of your Shift, run USB Tools in the windows mobile side. If nothing happens, go to your settings (still in mobile)- Connections, then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools first). Another note, some roms, for the wm side of shift, don't include the internet sharing app. If you can't find it, you've got a crap rom, and you should follow a guide which will allow you to put a real rom on it.
Make sure you are connected to the internet on win7 side (using wifi for example) to download WMDC (Windows Mobile Device Center).
If WMDC doesn't load, plug another pocket pc into the shift's usb port while running windows7 and it will download , or if you don't have another pocket pc lying around, download it manually from Microsoft.
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective.
Again, a big huge thanks to deadnex for originally posting the steps to this process. And thanks to everyone else who contributed to a better running shift via windows 7.
Caid.
444

You forgot to specify that drivers must be installed with Vista Compatibility mode enabled and run as Administrator

Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..

thanks for the reminder.

weird, list disk doesn't list my usb flash drive but lists all my other hard drives. what am i doing wrong?

You are probably under Windows XP. Try a vista computer or another computer for this operation.

Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".

Thanks for your description. It looks good. Only onr thing let me bluescreen
my Shift. Whenever I install Synaptics MicroPad(10[1].0.11.1) my Device ended with a bluescreen. I tried a newer Version from the website, but no way, same result. Does anybody understand why? Does someone found out same?
Greets
Androgyn

thaihugo said:
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Click to expand...
Click to collapse
I've added this part, thanks again Thaihugo.
Caid
444

thaihugo said:
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Click to expand...
Click to collapse
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?

Greenarcher707™ said:
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Click to expand...
Click to collapse
It's like driving a race car compared to vista.

apoparis said:
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
Click to expand...
Click to collapse
Please, is there anybody who can help me resolve my problem? I tried lots of times by nothing works..I'm reading all these positive comments about win7 and I can't wait to have them on my shift.. I can see the usb, I browse there to the folder I have the drivers but can't install them.
Thank you in advance

This is for those who've encountered problems.
Start the whole process over again. I didn't make the guide clear enough when I first posted this thread. It's clearer now. The symantec drivers are probably fine, you're probably crashing because windows aero is still enabled, and it is crashing your shift whenever it tries to switch to high res mode. Disable aero.
As for apop, you need to install via the second option, not the first. I got the same error when I selected the first install option when I booted into the windows 7 installer. This method will completely remove vista as the main os and put it in another folder. As a precaution, I recommend backing up personal documents that are stored in any windows sub directory. *word documents and the likes.
Anything outside of your windows directory, or on the main hard drive itself should remain after the install, but I only did this process once with extra stuff on the drive (it stayed).
Back it up, and do a fresh install.
Caid.
444

Thanks for your anser Caid. I just don't have an external DVD.. Is it impossible to go through 1st way? I have read that some people managed to do it this way..

You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid

thaihugo said:
It's like driving a race car compared to vista.
Click to expand...
Click to collapse
wow, that got me convinced. installing windows 7 right now. gonna probably stay up late ha ha

Caid444 said:
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
Click to expand...
Click to collapse
Yes, I'm using a usb card reader and sd card. I don't have two options (custom/express). Just one "install now"..
P.S. Thanks for your interest in my case.

ok
After you select "install now" there'll be a license agreement. After that there'll be a choice between two install options. You need to choose the second one.
Caid.

Can someone explain to me how to set up a cellular internet connection through windows 7? I've got the sim card inside, the phone recognizes it, but I don't know how to get it working through win7, I used control center to enable modem, but still no luck. This is really annoying.
Caid.
444

SnapView Turn's and WM7 too ... the screen goes off
Hi, I completed the W7 installation successfully. I even got to conect SnapView with W7 this time. I say this time because with the previous Wm7 guide I wasn't able to do it.
Anyway, now my screen is blank for WM and W7. In fact I have to press the on switch to get the W7 screen back. Once I have W7 working I need to reset Snapview throught the Shift Control Centre to get it going. Finally Snapview / WM comes on. However it lasts on for a few minutes and then the screen is off again. W7 will last for a few minutes more and the same will happen. I then need to press the sliding switch again. The W7 screen will turn on back to normal (the OS doesn't actually turn off but just the screen); however, WM doesn't turn on (in this case it's the screen and WM itself). I then need to repeat the resetting process again.
I did do this:
"
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective"
I did it at W7. Am I missing something? Any hints from the experts? Needless to say, everything was working fine with Vista.
Thanks

flash tells me it isn't a BA, when I know it is

I have definitely got the blue angel. It is an O2 Xda 11s.
I have downloaded the how to flash your BA pdf by D-Two, and followed the instructions. It gets through to the stage where it's about load the software onto the phone, and then it quits saying that he phone is not the appropriate model.
device information
Operator version: PDAViet.net
ROM version: 6.01.10 VH
ROM date: 07/08/08
Radio version: 1.06.00
ExtROM: diamond (01)
RAM size: 128 MB
Flashing eyes: 32 MB
Storage size: 60.3 MB
At present I have windows mobile 6.1.
And suggestions please?

for upgrading, you use the MAupgradeut_noID.
that program avoids country id errors but it was originally made for the magician, hence MA, whereas the original BA upgrade utility is called BAupgradeut.
that is why you get that error. you have to put the device into bootloader mode before connecting it to the pc and before starting maupgradeut_noid, that way, you avoid the device id check.
make sure to follow the correct upgrade procedure, found here: http://forum.xda-developers.com/showthread.php?t=630416

These are the instructions I used;
Temporarily remove your SD Card (it may work for you with the SD card still in your BA, but you may not be able to enter USB mode when cradled).
Put your device into Bootloader mode by pressing and holding the "Power" & "Record" buttons, and then press the Reset Button. Help me with this step
Connect the phone to the sync cable/cradle. sarcasm ahead Note: Did you see a sign out in front of this point that said: "You can flash using BlueTooth connection?" You know why you didn't see that sign? Because you can NOT FLASH using BlueTooth!
Now you can execute the installer file. (something like "MaUpgradeUt_noID")<--------------- Used This
Here is the screen just before boarding the software.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba1.png
And here is the error message.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba2.png

nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.

Chef_Tony said:
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Click to expand...
Click to collapse
yep, you were right,,,,,,, BUT same error message;
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/xda4.png

you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is

Chef_Tony said:
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Click to expand...
Click to collapse
Okay yes, I should have said this. I am using windows seven on a Lenovo N500 4233 32g. The problem is, trying to get hold of an XP machine. Have you tried running this programme in compatibility mode? I will have a look at your instructions and see where I get to.
Thanks for your help,

Is d-two's manual, the HTC service manual in you sig?

no, it is to be found here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
compatibility has nothing to do with it, neither has the xp mode or any virtual machine, because there must be suitable windows 7 drivers present. but i cannot help you with his tutorial, since i use windows xp for flashing and have never successfully used windows 7 for flashing.
the htc service manual in my sig is the official htc manual for hardware repairs, you can learn to disassemble the device there and have a list of spare parts