Database Develop

First hard drop...

So i just dropped my phone from head height onto a concrete floor
It slipped out of my hand while i was talking as i bumped into someone.
.
.
.
.
It survived! no marks, i'm not sure how it landed, but it was screen down on the floor when i found it.
Has anyone else dropped theirs and how has it managed? I'm sure we'd all like to know how much abuse it actually can handle.

same happens here...
and it dropped exactly the same way as yours did..haah
just like yours, no scratch and yet nth bad happened yet

Would have been even funnier if u were the one i bumped into lol
I think the cut off corners on the back really help. The back is heavier due to the battery and if it falls on a corner it seems to fall on the back cut off corner.

What a nightmare

i had 2 accidents. one of them "bent" the soft aluminum in the corner. still black and still working. the second one was so powerful that dissembled my diamond in 3 pieces: diamond (lol), cover and battery. i found the battery 2 meters from the disaster scene. this PDA seems to be a sturdy SOB..
any way, don't try this at home folks!!!1

Oh my preciousssss...

KukurikU said:
i had 2 accidents. one of them "bent" the soft aluminum in the corner. still black and still working. the second one was so powerful that dissembled my diamond in 3 pieces: diamond (lol), cover and battery. i found the battery 2 meters from the disaster scene. this PDA seems to be a sturdy SOB..
any way, don't try this at home folks!!!1
Click to expand...
Click to collapse
Sounds like it's dangerous there rehovot
Nadavi

pedmond said:
Oh my preciousssss...
Click to expand...
Click to collapse
hahaha ! smechere, vezi filme interzise....
Sounds like it's dangerous there rehovot
Click to expand...
Click to collapse
אולם מסוכן...

Nice to know it can survive a few knocks! It must have been one of those oh **** moments. Did the guy actually stop to apologise, I would have probably thumped him one, not that i advocate physically attacking someone LOL
So was it rough concrete, like paving stones, or something smooth like a tilled floor?

I sat in a recliner chair outside the other day and lay back. My diamond slipped out of my pocket onto a concrete floor from about a height of 30-40cm. There's now a small (very small) dent in the aluminium bit, bottom right, near the stylus slot.
It's hardly noticable, but I was gutted at the time!

imranbashir_uk said:
Nice to know it can survive a few knocks! It must have been one of those oh **** moments. Did the guy actually stop to apologise, I would have probably thumped him one, not that i advocate physically attacking someone LOL
So was it rough concrete, like paving stones, or something smooth like a tilled floor?
Click to expand...
Click to collapse
lol, it was my fault actually.. i was to busy talking on the phone and not paying atention. It was a smooth concrete floor thankfully!

not a diamond but...
Twice now I've had accidents with my Polaris on the running machine. The phone was resting in the slot on the machine while I was running. I must have knocked the headphone cable or something because the phone got yanked from the slot, dropped (about chest height) onto the treadmill and went flying back into the wall behind. Not even a scratch!

OUCH!!
<10 chars>

dropped mine from waist height....
my waist is probably higher than most of your ears lol JOKE lol again but anyways I got a little tiny scratch on the stylus....I guess thats why they give you 2 of those puppies....I love it. You know its a little heavier than most pdas from the metal frame but yes its a tough SOB and also I heard that the screen is made of some kind of really special plexiglass to prevent cracks. I heard you can drop it from a two story building and the glass will not crack!!! I would definately not try this at home but its what I heard....

I dropped it on the way back from the pub!!
The metal bezel now has three deep lines in it on the front side under the hardware buttons Fortunatly its still black
The top of the bezel on the front also has 3 scartches which have exposed the silver metal underneath.
what a disaster!

You remember that James Bond Movie with the evil guy having Diamonds in his face?
Well, my device slipped out of my hands , glided a meter or 2 on the parking ground and has now similar small dots (diamonds) on the lower part and casing.
But no worries, I gonna let "tune" paint & polish my Diamond.
They ask 150 NTD (5US) for refurbushing a PDA phone here

You guys gave me the creeeepssss.

Hmm i thought it was just me at first, but i've been checking all day, and my touch screen has become ALOT more sensative since the drop.
I actually had a phone call and while trying to fumble to pick up the call i dropped the phone. When i picked it up the touchscreen wouldnt work. After a reboot it was fine again. Now the lightest touch registers on the screen. Very wierd, but the scartches almost seem worth it to have it working so well.
I hope it doesnt die on my now :s

someone1234 said:
Hmm i thought it was just me at first, but i've been checking all day, and my touch screen has become ALOT more sensative since the drop.
I actually had a phone call and while trying to fumble to pick up the call i dropped the phone. When i picked it up the touchscreen wouldnt work. After a reboot it was fine again. Now the lightest touch registers on the screen. Very wierd, but the scartches almost seem worth it to have it working so well.
I hope it doesnt die on my now :s
Click to expand...
Click to collapse
Probably your fall activaded the Threshold tweak!

someone1234 said:
I actually had a phone call and while trying to fumble to pick up the call i dropped the phone. When i picked it up the touchscreen wouldnt work. After a reboot it was fine again. Now the lightest touch registers on the screen. Very wierd, but the scartches almost seem worth it to have it working so well.
Click to expand...
Click to collapse
LOL, thats another undocumented mod that can be added to the sticky!

Mysterious stains under the display glass

Hi everyone,
I've had a display protector on my 4X (~7 months old now) from day one. Lately, I discovered some stains on the display and got a new protector. When I removed the old one, I discovered that those mysterious stains were actually on the display glass. After trying to remove them with a microfibre cloth and finally glass cleaner, I realized they are actually on the downside of the display glass.
I have no clue why they turned out now or even where they come from. The display itself still works perfect.
Did anybody of you experience the same problem? Is it a manufacturing error? Living bacteria colony inside my phone? I have absolutely no idea.
Would an error of this kind be covered by the warranty?
I've attached two pictures, the stains are kind of hard to capture with a camera, but I think you can see them.
Regards,
pint

possibly the outcome of going on XXX sites ,lol only joking, could it be caused by possible condensation or possible that the screen has got so hot sometime due to it having the protector on and staining that way

My computer screen is so dirty, i can't see what you mean

AW: Mysterious stains under the display glass
Mikey94 said:
My computer screen is so dirty, i can't see what you mean
Click to expand...
Click to collapse
Haha, same problem with me
@pitness: it seems like you're german, so check out the P880-Thread on the "android-hilfe"-forum, there is a large thread about your problem...

Well, thanks for the answers, guys.
@friartuckme:
I have an Iconia A500 for a mans special needs jk
@black-duty
Thanks for the tip, i checked the forum, but the only thread I found was "dust particles under the display"... The pics there actualy looked like dust particles, unlike the "stains" on my phone. I guess I'll just trust try to get a fee warranty repair... After all, the only thing I can imagine is actually a condensed fluid (It never got wet, so... Sweat from my pockets?! but wouldn't that more likely kill the electronics?).
edit: btw what the hell guys, clean your computer screens! totally worth it.

pintness said:
Well, thanks for the answers, guys.
@friartuckme:
I have an Iconia A500 for a mans special needs jk
@black-duty
Thanks for the tip, i checked the forum, but the only thread I found was "dust particles under the display"... The pics there actualy looked like dust particles, unlike the "stains" on my phone. I guess I'll just trust try to get a fee warranty repair... After all, the only thing I can imagine is actually a condensed fluid (It never got wet, so... Sweat from my pockets?! but wouldn't that more likely kill the electronics?).
edit: btw what the hell guys, clean your computer screens! totally worth it.
Click to expand...
Click to collapse
I got almost the same stain as you got looking from the picture and im confident that it is dust or some dirt that got in. Thats because when it first started to get under my screen it looked more like dust particles but know it more looks like a dirty stain like your pictures.
Also when i first noticed the stain forming it came in from the angle where the front camera is top right corner. I also see some slight gap there between the display and the cover at my phone.
Im going to send it back soon since it really annoys me.

I have the same problem. It's definitely no dust. The stain was small but became bigger and bigger. Have you found a solution yet? I found this post:
snekler said:
hello you ,i had the same thing with dust ,so i used this video can't post link, search youtube for 'disassembling lg p880 and i cleaned but was no dust its some sort of oxidation it was really hard to clean i used spirit ,but now its ok my screen is ok:victory:
Click to expand...
Click to collapse
Hope it helps.

Anyone else have tiny nicks in the aluminium

A tiny gripe for the perfectionists. But I noticed after a day, that I had a couple of tiny little nicks in the aluminium. As the phone had just been lying on my desk and hadn't been taken outside it must have come that way. I didn't see them at first because they are on the edges and not on the back surface. It is very tiny and it was because it caught the light that I noticed it. I remember when the iPhone 5 came out there were scores of people with chips on the black iPhones that showed silver underneath. This is nowhere near as bad as that....just the light catching the fact that the surface is not quite flat. I had the same with an iPhone 4 a few years ago as well. Seems to me that aluminium is very dingable, even in the factory.
Anyone else notice this?

Mines fine so far, no complaints.
Sent from my HTC One using xda app-developers app

None really had a small black mark but managed to get rid of it quite easily

jonstatt said:
A tiny gripe for the perfectionists. But I noticed after a day, that I had a couple of tiny little nicks in the aluminium. As the phone had just been lying on my desk and hadn't been taken outside it must have come that way. I didn't see them at first because they are on the edges and not on the back surface. It is very tiny and it was because it caught the light that I noticed it. I remember when the iPhone 5 came out there were scores of people with chips on the black iPhones that showed silver underneath. This is nowhere near as bad as that....just the light catching the fact that the surface is not quite flat. I had the same with an iPhone 4 a few years ago as well. Seems to me that aluminium is very dingable, even in the factory.
Anyone else notice this?
Click to expand...
Click to collapse
What colour and is it possible that you post some pictures? I would like to follow this as would a lot of potential buyers Thanks, I have run out of thanks for the day
Please keep us posted about this

markj338 said:
What colour and is it possible that you post some pictures? I would like to follow this as would a lot of potential buyers Thanks, I have run out of thanks for the day
Please keep us posted about this
Click to expand...
Click to collapse
I tried to take a photo of it, but I am going to need someone at home to help me take the picture as its all about getting the light angled correctly so that its clear in the picture. So I will need someone to hold the phone at the right angle so I can get a picture to show. I will try and see if I can get a picture shortly. It is a silver phone, the only colour available right now.

It's not possible to make it 'perfect' so there will be slight defects.
Mine has a tiny little mark on the top that unless you really look for it in certain light its not possible to really see.

Unless there's a real dent or chip on the casing, it shouldn't be a problem. I know it can annoy perfectionists but man, that is aluminium, it is understandable (to an extent, of course)

yep, my silver came with tiny nicks..could feel them when i ran my fingers down the side.not there now [3 days later], maybe 'ironed' out lol

lezduur said:
yep, my silver came with tiny nicks..could feel them when i ran my fingers down the side.not there now [3 days later], maybe 'ironed' out lol
Click to expand...
Click to collapse
Haha...I hope the metal is not SO soft such that it would be possible!
I have wondered if a fingernail is able to nick the edges of the metal. The anodising is only on the back surface. So the bevelled edges will be more suceptible. It is the edge where I noticed a couple of tiny nicks.
I was reading that a fingernal has a hardness of 2.5 (on some scale that I forget the name of). And aluminium is 2.5-3. This would suggest a fingernail striking the edge of the phone could put a nick it. But I am not willing to try intentionally to do so!

jonstatt said:
Haha...I hope the metal is not SO soft such that it would be possible!
I have wondered if a fingernail is able to nick the edges of the metal. The anodising is only on the back surface. So the bevelled edges will be more suceptible. It is the edge where I noticed a couple of tiny nicks.
I was reading that a fingernal has a hardness of 2.5 (on some scale that I forget the name of). And aluminium is 2.5-3. This would suggest a fingernail striking the edge of the phone could put a nick it. But I am not willing to try intentionally to do so!
Click to expand...
Click to collapse
Mohs scale! Yeah, they do overlap on the hardness scale, and nails have a history of being able to scratch aluminum (take Macbooks, for instance).

Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the silver lightly. looks like someones drawn a line with a lead pencil by the power button now. might try to buff it out but afraid if i wear the area down it will all go a dull grey.

jcb1985 said:
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the silver lightly. looks like someones drawn a line with a lead pencil by the power button now. might try to buff it out but afraid if i wear the area down it will all go a dull grey.
Click to expand...
Click to collapse
Note to self: Don't be lazy about cutting your nails once you get this phone.
Good call! :good:

jcb1985 said:
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the
Click to expand...
Click to collapse
My wife has damaged three buttons on 2 DAB radios and one remote control by that method.
Not even necessary to use a fingernail to operate the buttons, either.

jcb1985 said:
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the silver lightly. looks like someones drawn a line with a lead pencil by the power button now. might try to buff it out but afraid if i wear the area down it will all go a dull grey.
Click to expand...
Click to collapse
Rule number 1: never let your wife come anywhere near your phone :silly:

compact_bijou said:
My wife has damaged three buttons on 2 DAB radios and one remote control by that method.
Not even necessary to use a fingernail to operate the buttons, either.
Click to expand...
Click to collapse
Have you ever tried growing your nails out super long? The pads of your fingers begin to cease to exist. :laugh:

This is weird. And yes aluminum does indeed has a weak mohs scale and that's the main reason why they anodize it. Now when anodized the mohs scale increases to 9 so how would a fingernail even scratch that?

i can assure you that it does scratch with false fingernails regardless of any specifications.

Riyal said:
This is weird. And yes aluminum does indeed has a weak mohs scale and that's the main reason why they anodize it. Now when anodized the mohs scale increases to 9 so how would a fingernail even scratch that?
Click to expand...
Click to collapse
I dont believe all of the aluminium is anodised though. The back surface certainly is. But there is a bevelled edge which is almost shiny like a mirror, and I think that area is not treated and is also where I found a couple of tiny nicks (seen when angled under a spotlight) out of the box. It is unfortunately also the most likely bit to be hit knocked, swiped with a fingernail etc.

jonstatt said:
I dont believe all of the aluminium is anodised though. The back surface certainly is. But there is a bevelled edge which is almost shiny like a mirror, and I think that area is not treated and is also where I found a couple of tiny nicks (seen when angled under a spotlight) out of the box. It is unfortunately also the most likely bit to be hit knocked, swiped with a fingernail etc.
Click to expand...
Click to collapse
Could you post a picture of that bevelled edge? I'm not sure what you're saying but HTC One is unibody. And when you anodize aluminum you submerge the whole body into a solution. So it's quite impossible that some parts get's anodized and some aren't.

I guess I have to cut all my nails b4 buying it lmao
Sent from my GT-I9300 using Tapatalk 2

[Q] Xperia Z plastic scratched/dented help needed.

Hello guys
to sum it up i have the Xperia Z in black. I have a sticker on it covering everything except the black lines on the sides of the phone on each side of the flaps. So the bits where it is black rubbery plastic. So i had the phone in my jacket like an idiot and normally i have a pocket i keep the phone in ususally. However yestarday i had forgotten the pocket and was carrying the phone in my jacket when i decided to take off my headset and by doing that forgot to zip up the jacket and the phone fell off top first onto concrete.
Phone works perfectly screen or any glass is not damaged at all the only damage were 2 small dents on both sides of the top of the phone. So the rubbery plastic top righ. One is near the music jack and the other one above the USB port.
So my question is since i screwed it up warranty is obviously bull****. My q is would there be any way to repair this. As in paint marker or anything that might cover it up? (except for a backplate protector or snap in ) hate all of those.
Obviously goes without saying all help would greaty be appreciated and used to reinstate my inner tranquility.
Best Regards
Shallowmist

Shallowmist said:
Hello guys
to sum it up i have the Xperia Z in black. I have a sticker on it covering everything except the black lines on the sides of the phone on each side of the flaps. So the bits where it is black rubbery plastic. So i had the phone in my jacket like an idiot and normally i have a pocket i keep the phone in ususally. However yestarday i had forgotten the pocket and was carrying the phone in my jacket when i decided to take off my headset and by doing that forgot to zip up the jacket and the phone fell off top first onto concrete.
Phone works perfectly screen or any glass is not damaged at all the only damage were 2 small dents on both sides of the top of the phone. So the rubbery plastic top righ. One is near the music jack and the other one above the USB port.
So my question is since i screwed it up warranty is obviously bull****. My q is would there be any way to repair this. As in paint marker or anything that might cover it up? (except for a backplate protector or snap in ) hate all of those.
Obviously goes without saying all help would greaty be appreciated and used to reinstate my inner tranquility.
Best Regards
Shallowmist
Click to expand...
Click to collapse
It's good and all, but pictures would help us A LOT! Based on your picture we can't really give you any advice.

Good point
Dsteppa said:
It's good and all, but pictures would help us A LOT! Based on your picture we can't really give you any advice.
Click to expand...
Click to collapse
Excellent point my friend, i shall aquire the afore mentioned pictures later today with my trusty Xperia Play. At any rate i tried to explain it as best as possible but like you said without pictures it's just horrible....

Pictures Update!
Dsteppa said:
It's good and all, but pictures would help us A LOT! Based on your picture we can't really give you any advice.
Click to expand...
Click to collapse
Here are the PIC updates.

Shallowmist said:
Here are the PIC updates.
Click to expand...
Click to collapse
I have a ding jus like that on my phone next to the microphone port...I dont even know where it came from!! I havent dropped it...I even rest it on a napkin on my desk and its always in my left pocket which is solely dedicated to my XZ ...lolz...nooo idea....

I feel your pain bro i too have a couple of nicks on the phone and it's bugging me lol

Is there any feasible action to undertake here.
Teknohtc said:
I feel your pain bro i too have a couple of nicks on the phone and it's bugging me lol
Click to expand...
Click to collapse
It is incredibly annoying to have these nicks and scrapes on it. Obviously it beats not having the phone or having broken glass, but everyone has their own problems i guess. Is there seriously nothing that can be done about this?.

Shallowmist said:
It is incredibly annoying to have these nicks and scrapes on it. Obviously it beats not having the phone or having broken glass, but everyone has their own problems i guess. Is there seriously nothing that can be done about this?.
Click to expand...
Click to collapse
I think the only thing you can do is replace the whole skeleton :crying:

Shallowmist said:
Here are the PIC updates.
Click to expand...
Click to collapse
May i know where you get your back screen protector/picture ?

I was afraid fo the skeleton thing and skin is from!!!!
joejoe23 said:
May i know where you get your back screen protector/picture ?
Click to expand...
Click to collapse
I was afraid that the skeleton might have to be changed, but the skin is front and back the only visible parts left on the phone are the little black sides i got my bumps on and the front glass. I purchased mine from http://www.ebay.co.uk/itm/ws/eBayIS...9&ssPageName=ADME:L:PMR:NL:1123#ht_6096wt_907
They have many different models i just got this one. These guys are amazing in bringing out good things i had one of those on ipod 4 used it 8 months than sold the ipod never had problems with the skin.

xperia z
is there a factory screen protector on the back of xperia z, as there is on the front. I scratched the back of the Xperia z. And if there is no screen protector back, is there a possibility of polishing

I did the same thing. I was so in love with the screen I didn't think to check out how scratch resistive the rear panel was until I had let it get sl gouged to all hell

Mines missing both the USB and heaphone flaps, front and back are cracked, there is virtually nothing left of the plastic around the outside and the bottom face is missing the sticker that has the barcode and such on...
Makes me laugh when people worry about little marks

[Q] Jeans stain!

Heya.
I've had my nexus 6 for a week, totally loving it. But I recently noticed a mark, or stain on the back cover. I tried cleaning it away with some alcohol but it didn't fade. From the position of the mark I've figured out it's the jeans! I'll be washing those. However I don't know how to remove the stain, I heard chloride solutions might do the trick, but I'm afraid that'll bleach the cover. Fyi, I have the midnight blue version.
Does anyone have any advice? :s

I cannot see how jeans colour could run enough to stain a phone yet be persistent enough to withstand alcohol :/

rootSU said:
I cannot see how jeans colour could run enough to stain a phone yet be persistent enough to withstand alcohol :/
Click to expand...
Click to collapse
Well now, I assure you it's happended :s, sadly. The stain isn't too noticedable though thanks to the already blue color of my cover, but the stain is darker. When most noticable is when holding the phone in an angle so the light reflects on it.

Wiggy boy said:
Well now, I assure you it's happended :s, sadly. The stain isn't too noticedable though thanks to the already blue color of my cover, but the stain is darker. When most noticable is when holding the phone in an angle so the light reflects on it.
Click to expand...
Click to collapse
What I meant was perhaps the stain is from something else.

rootSU said:
What I meant was perhaps the stain is from something else.
Click to expand...
Click to collapse
Aha, Well I don't know if it's a jeans stain, but from the evidence, that's my conclusion. The phone is abit big for my pocket, so a bit of it sticks out. The stain looks like a line, which fits perfect to the edge of my pocket.

Hmm. That could even be a "polish" where its rubbed it and buffed it up a bit.

rootSU said:
Hmm. That could even be a "polish" where its rubbed it and buffed it up a bit.
Click to expand...
Click to collapse
Friction ain't science-fiction

So?, any ideas or clues on what could remove it? or is it suck forever?

If it's rubbed away from friction/rubbing, you might be stuck with it. If you're really worried about it, I believe replacement backs are cheap on eBay. However, for now, you can probably invest in a Slickwraps or dbrand skin and hope that the vinyl can withstand the the issue causing the markings on your phone.

Stop wasting your time, here you go. The are many more sellers that sell this back cover, they are all OEM.
http://www.ebay.com/itm/Battery-Doo...794?pt=LH_DefaultDomain_0&hash=item3cedb2ad92
Here is also a video how to do the installation, enjoy.
https://youtu.be/NaTkQ0JPyS8
Sent from my Nexus 7 using XDA Free mobile app

Just get one of these! Stylish, easy, awesome! BAM! done.
https://slickwraps.com/devices/phones/android/google-nexus-6.html

Diocat said:
If it's rubbed away from friction/rubbing, you might be stuck with it. If you're really worried about it, I believe replacement backs are cheap on eBay. However, for now, you can probably invest in a Slickwraps or dbrand skin and hope that the vinyl can withstand the the issue causing the markings on your phone.
Click to expand...
Click to collapse
You can also buy a $10 skin for the back. Pretty nice options: https://dbrand.com/shop/nexus-6
That's what I'm headed for.