Related
Hi Guys,
I just got my T Mobile MDA3 2 days ago and am very impressed with it. Unfortunately this afternoon activesync stopped working and I cannot get it to connect to my MDA 3 no matter what I try.
I ve tried re installing activesync, soft reset, Hard reset, re installing again, usb port change, Different connection settings you name it but nothing seems to get it to connect to my desk top.
It was working fine all day and then it just gave up. can anyone suggest a fix.
Thanks
Oh I should also mention that when I put the MDA3 in the cradle both the MDA and activesync lightup as if they are trying to connect and then nothing happens.
activesync
Hi i had the same problem .Did all the things you did en then thought maybe the problem is on the PC.
did a System Restore to the day that everything worked fine and guess what : Activesync works fine know.
Hi. Did that already but still the same thing. Activesync just stays on connecting. The MDA actually says on the screen Host authenticated and then connected but a second after that it disconnects.
Really dont know whats next.
Have you tried restarting your computer that is running AS? FYI, you can google "Kill ActiveSync". First delete existing partnerships then use it to shut down AS. Then plug the unit in the cradle.
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440
I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.
calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck
dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!
Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas
I have a G3 wizard. I was stupid and trying to go from button's ROM to Crossbow reloaded. The flash ended up crashing somewhere in the 80% range. Now my wizard will rarely get into bootloader mode. I'm leaving the battery out for 5 minutes at a time. When I put it back in it will go into bootloader mode until I plug the USB cable in it and try to flash it the screen comes goes grey and I get a 260 update error..
I really hope I didn't brick this thing, It's my only connection and I have some important new job related calls to make!
mine is stuck on the flash screen
i have a g3 wizard and today it would not get past the windows mobile 6 professional splash screen (tnt rom). is there anything i can do. i tried reflash it but could not establish a connection. please help
tarusdg said:
i have a g3 wizard and today it would not get past the windows mobile 6 professional splash screen (tnt rom). is there anything i can do. i tried reflash it but could not establish a connection. please help
Click to expand...
Click to collapse
Try holding the camera button while powering it on. Then put in the usb cable and flash away.
tarusdg said:
i have a g3 wizard and today it would not get past the windows mobile 6 professional splash screen (tnt rom). is there anything i can do. i tried reflash it but could not establish a connection. please help
Click to expand...
Click to collapse
Do a Soft reset of the phone,if it works out,fine,otherwise do the Hard reset,although you might lose your personal data but phone will work out.
If both do nothing and it still gets stuck,then there's no other way except to reflash.
Which connectivity your not getting,If you are saying about Activesync connectivity,then you don't need Activesync connectivity to flash,get your phone into Bootloaders(multicolor screen) connect it to your pc via usb cable,when usb appears at the bottom of the bootloadermode,flash the Rom.
But if you cannot establish connectivity through usb cable,then either your usb cable is faulty or the mini usb port of the phone is damaged.
Looks like i've been threadjacked...can anyone help?
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
ActiveSync
Moved message
Needs a little bump here
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Sounds like something has changed on your PC, perhaps via a Windows Update. Have you checked to see if your firewall is the culprit?
You may also want to do a clean uninstall and then reinstall Activeswync 4.5 and create a new partnership with your device.
You can also try restoring your PC back to a date that you were able to use Activesync....
This happens to me rather frequently (I am looking for an ActiveSync replacement because of it).
However, I fix it by either soft reset of the device, PC, or sometimes both. If that doesn't work, you need to delete the partnership with the PC and reconnect.
RK
...any solutions yet?
I just got my kaiser 3 weeks ago after using a wizard for almost 2 years. what a great phone the wizard was... I kinda miss using it! Anyhow, i just experienced the sudden activesync failure. I now get random activesync openings on my kaiser with the message "To synchronize your device with a desktop computer... yada yada".
I have already setup a bogus server and set the scheduling to manual.
I have compared the wizard registry to the kaiser registry by searching every instance of 'activesync' and couldnt find anything.
I also deleted all instances of activesync in the notification queue and had memmaid rebuild it.
The device will connect to activesync but pops an error message that it could not synchronize and goes into a guest account setting. So for now I am having to use pimbackup to backup my data on the kaiser, bluetooth it to my wizard, then sync the wizard with my laptop to get the data into outlook. I am considering a hard reset but kind of want to wait until the at&t 6.1 official Rom comes out. I am also considering Chapura Pocketmirror Professional which worked well on an old Ipaq i had (wm2k3) that had sync issues. I also want to get this resolved so i can practice loading a new rom on the wizard. So....
Anyone have a fix yet? I hope so!!!
Oh, and for reference (to answer questions from other threads), my kaiser battery drains 4 to 5 times faster than the wizard in side by side use, and the kaiser definitely does not have a transflective screen while the wizard does... bummer. but the kaiser is tremednously faster!
1. Disconnect the device from your computer.
2. Try going to your device and select:
start->settings->connections->USB to PC.
3. Uncheck "enable advanced network functionality"
4. Reconnect the device.
Active Sync....
Hi,
You can try "PocketMirror® Professional 2.2.4 for Windows Mobile", its a pretty good syncronization tool, but it costs a few bucks...
I've been using the trial version of PocketMirror and must say its pretty good with my TYTN 2.
Regs,
The Reaper.
... my thoughts exactly
yeah, i tried the usb to pc option as well. even downloaded a cab from another thread that allowed me to choose rndis or usb mode. neither worked. I will probably use pocketmirror pro as well...
Hi, I just flashed a new ROM on my Orbit that works brilliantly, no issues at all, apart from the fact that the computer now doesn't see the device at all. Not even the blo-blong sound when you connect any USB device. The only thing I get connecting the cable is charging the battery. And if I start Active Sync on my Orbit I get the same message as mystic_nacho:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC"
I just tried an hard reset to try to fix the issue - no success..
Before flashing everything was fine..
Btw, my wife Diamond doesn't connect either, and it never did it: something related to the TouchFlo thing?
Any idea?
The ROM I flashed is
gullums TouchFlo2D beta 4
update
I found the Diamond 'Getting started disc' and installed the Windows Mobile resources tool...
The disc I have from the Orbit box is for Windows Mobile 5, I guess it's not worth to find it out and try...
Nothing changed, anyway.
update 2
Yesterday night out of the blue - while the Orbit was still connected to the pc - ActiveSync started to work... F. knows....
i had the same problem - sync was working fine and then stopped. what worked for me was to go to USB to PC under settings and uncheck "enable faster data syncronization".
hi,
i also had sync. problems in the past.
searched for months.. since i figured out that some registry entries on my PC where missing!
imported the mayor setting from my brothers PC and TADAAAAAA. problem solved.
search my threads and maybe you 've luck with my soloution!
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Have you recently used a memory cleaning Application like memmaid, Clear Temp, or SKTools? You might have cleaned out some important notification files, like repllog,exe that is used for activesync.
I had the same thing happen to me when I first used these cleaners. I had to do a hard reset on the phone to make it work again found out about the remedies listed below after the reset.
I have heard others were successful repairing these notification Queue's with MemMaid. You can hold your stylus on the repllog,exe notification, and a popup up will appear, asking you to Recreate ActiveSync, or rebuild notification Queue. I don't know if this feature is available in Clear Temp, or SK tools.
I've also heard of restoring activesync by unchecking all of the folders, syncing, and then adding each folder back to the list, one by one, until all is restored.
I too have just developed the same problem.
I have 2 TYTN II' one will sync fine the other wont.
It all went horribly wrong after I tried to install Wisbar and an Ipod theme, after I uninstalled it, cos it didn't work I found I could no longer sync with USB to PC and the sync option is greyed out on my phone. The phone will charge with some of my usb cables, but now even seems fussy about which cable will charge and some now won't.
I am given to wondering whether the usb connection on my Phone is the problem...everything else seems to be working fine.
I have even installed different ROMS via the memory card still the problem persists.
I would love someone to come up with a fix
**UPDATE**
Well I now have got it working, in my case I was right, the usb connection on the phone was to blame. I took it to a mobile repair shop, I told the guy that I thought it was faulty he took one look at it and said that I had a bent pin, he got a little tool out and teased it back into position, sure enough when I got home it worked fine so now I am able to sync again. Not sure how long it will last though.
**Update 2**
Failed again, at least I know what's wrong now.
Hi All,
I've been running the Orange (UK) WM6.1 ROM for months/years without problems and was messing around with some texts and somewhere along the line I have ended up with the standard 4 stripes down the screen and some text top left.
I have scanned the forums here and the wiki and they suggest connecting using USB and running Mtty.exe, however whilst I can connect the phone using USB Activesync won't recognise it and then I get an error from Mtty.exe because it won't recognise the phone.
I have also tried re-intalling the Orange ROM as well as newer roms, but none of them seem to be able to connect to the phone.
Active sync doesn't seem to be able to connect on Win 7 or Win XP despite them syncing fine this morning.
So, any suggestions out there?
I'll do some more searching, but any pointers would be appreciated.
Thanks.
Try a new USB cable, I went through 5 in one year, or try flashing via SD card.
Well I tried a couple of different leads and no luck.
I did manage to get some info from mtty.exe, but didn't make sense.
I took my SIM out to use in another phone and having left the battery out for a while, put it back in to try again at getting it to start and it booted fine without any problems.
After a bit of messing around it seems like that the boot problem is either down to a problem with the SD card, SIM or a foreign object in phones casing.
I keep the phone in a pocket of my overals that I use a workshop and occasionally iron filings from a grinder can get into it's working, which is what I think has happened.
ANyway, it's back and working again, only need to keep it going until Orange can get some Desire HDs in
Hi!
Read those threads again,the solution is there.
1.Disable USB connections in Activesync menu (right click on green icon on the tray)-->connection settings-->untick "Allow USB connections"
2.Put your device in bootloader mode (yours is in it)
3.Start to connect it with MTTY to do what you want or just run an official Orange UK ROM update
If everything is fine,your device will be alive again.
After that install Hard-SPL to avoid problems like this.
BR
Scootie
P.S.:Sorry,I didn't read post #3,but it can be useful later.
One more tip:check the camera button.
Thanks Scootie,
I'll try the Hard-SPL thing - the jumping into boot loader seems pretty random, has happened a couple more times and I find I have to pull the battery for several minutes and then try a restart.
The camera button doesn't seem to do much other than what it is supposed to.
Pretty annoying since I have had the phone for 3 years, but have not had signal at home so hardly use it, and now we have signal due to Orange/T-Mobile merger from the beginning of the month the phone fails me :-(