Related
Current Update:Feb 1st 2008 12:58AM
Wing for NOOBS like me.
All information in this thread was copied from other peopled, all I have done is put it in one place.. I will update this from time to time
DISCLAIMER:
I am in no way responsible the content listed below, most of this should work as the people of the community do help each other. Please be careful. And report any errors to me.
Adding Information, If you wish to add information to this post, please private message me it, I will add the info, please provide me a link to the data if you have it, and the original writer of said info, I will give the credit to the writing and the provider of said info.
please send it with the general area for it to go
ie: part 2:tweaks or part 4: random stuff.
so i can add it to the proper area fast, and if it doesnt fit into anything - i will add it to random stuff or new area. but we have the random stuff
Part 1: useful thread Post.
[*]Part 2: Random tweaks.
[*]Part 3: Rom’s Touch it/Open Touch Wing.
[*]Part 4: Random Info: random stuff that is unsorted
[*]Part 5: T-Mo Wing RUU for USA [the original tmobile install]
Updated on December 17 2007
Part 1: Useful Threads
Cab install for the Wing
The Following is from zcink @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=341867
Great Wing Info Thread
The following is from Nyer78 @ XDA
Original Thread @ http://forum.xda-developers.com/showthread.php?t=326655
General HTC Cabs
The Following is from patr!k @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=344533
All WM6 Roms
The following is from papamopps @ XDA
http://forum.xda-developers.com/showthread.php?t=358030
Part 2 tweaks.
The Following is from – Tater_Tot24 @ Howard forums
Original thread @ http://www.howardforums.com/showthread.php?t=1215155
Please Note that some of these entries only apply to the WING.
Add Side Button Functionality:
1. Using a registry editor go to HKLM\Software\Microsoft\Shell\Keys
2. In Keys, create a new Key named "40C7".
3. Copy the contents of 40C5 to to 40C7.
4. Edit the "Name" value replacing the "4" with a "5" (5 is Voice command button).
5. Close the registry editor.
6. In Settings\Buttons you should see the new "Button 5(Hold)" entry. If not, soft reset.
Note: I had to make voice command the hold function and screentoggle the non hold function for it to work correctly.
Camera Settings:
1. Open the camera, so you can see images thru the camera lens.
2. Go to bottom of screen & click on the "Y" at far left side.
3. Now move to the 4th icon at the bottom, and set the resolution on "L" and the quality on Super Fine (not Basic).
4. Move to the next icon on the right, and set the Capture Mode on either "Burst" or "Sports"
5. Next, click the icon at far left and set your Capture Speed to either Moderate or Fast, and "Snapshots" to at least 3.
6. Click on the next icon on the right and set it on Storage Card.
7. Finally, click the "Sun" and set the White Balance on Auto.
8. Click OK in the upper right, and you're almost set. Just go now to far left of camera screen and click either of the tiny > arrows until you come to 1/3 (or 1/5 or 1/7 or 1/10, depending on how you set "Snapshots.")
9. Now you're set to take some really great pictures. They will be sharp & clear all the way from about 12 inches to infinity.
10. For sharper pictures, leave the setting at 1x. Anything else is a "Zoom" shot.
Enhanced File System Performance:
Registry: HKLM\System\StorageManager\FATFS
Key: CacheSize (dWord)
Default: 0 (I am not sure what this equates to, the valid values I know about are 4096, 8192, 16384)
New Value: 8192
Hide SIM Contacts:
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Default: 1 (show)
New Value: 0 (hide)
Active Sync Running in the Background Fix:
1. Create a “Fake Server”
Configure Server Menu Activesync Programs 2.Go to Start
3. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
4. Server Address: fake / User name: fake / Password: fake / Domain: fake. Then you are finished creating the fake server
5. Finally, UNCHECK the box in the time zones tab in the phone settings (This may sound silly, but it works! I promise!!)
MyFavs Missed Call Fix:
Registry: \HKLM\Security\Phone\NoLog
Key: List
Action: REMOVE
Hard Reset Instructions:
1. Hold down both of the “soft buttons”
2. Perform a soft reset with the stylus while still holding down the buttons
3. Push the green phone button to confirm that you do want to do a hard reset
DeBrand the Phone:
1. Perform a Hard Reset (instructions listed below)
2. Phone cycles through format, installs WM6, then prompts you to config touch screen
3. Install finishes and loads WM6
4. Then a prompt appears warning that EXT ROM will install extra contents (don't install! poke the soft reset button before EXT ROM install)
5. Hit soft reset button when EXT ROM prompt appears, you have 3 seconds!
6. Power on like normal
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
MMS Sending Issue Fix:
1. Due to incorrect Port setting for the MMS server, the phone may not be able to send MMS messages all the time.
2. Go to Text/Multimedia --> Menue --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
3. Make sure the settings are set to: Gateway: 216.155.165.50 / Port Number: 8080 / Server: http://216.155.174.84/servlets/mms
Remap Soft Buttons:
For Calendar
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Default
Default: Calendar
New Value: Internet (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Open
Default: HTCCalendar.exe
New Value: \Windows\iexplore.exe (again, anything you want goes here)
For Contacts
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Default
Default: Contacts
New Value: (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Open
Default: \Windows\RSK\Contacts.lnk
New Value: (again, anything you want goes here)
Remove / Modify Startup Sound:
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Enable (dWord)
Default: 1 (jingle on)
New Value: 0 (jingle off)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Volume (dWord)
Default: 127
New Values: 16 - 200
You can also modify the sound and animation by changing the WAV and GIF files in these two keys.
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: WAVFile (SZ String Value)
Default: \Windows\T-Mobile startup.wav
New Value: (whatever you want)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: GIFFile (SZ String Value)
Default: \Windows\TMO_Startup.gif
New Value: (whatever you want)
Remove the Tray Icon from Today Screen:
Registry: \HKLM\init\
Key: Launch92
Action: DELETE
Note: If you want to keep some but not all of the icons:
Registry: HKLM\Software\HTC\TrayApplet
There you'll find listings for each icon (the folders are for the WinWap, MyFaves, and CommManager tray icons). Remove the ones you don't want and soft reset. If you remove the music player settings, you will then have to uncheck the plug-in from Today items.
Adding Slide Sounds:
1. First you are going to need two .wav files.
2. Once you have the two sounds that you want to use, Rename them to Slider3_in.wav and Slider3_out.wav and place them in the \Windows Folder on your phone.
3. Go to the Registry: HKLM\Software\HTC\SlidingSound\.
4. Once your there you should see 3 Folders (keys) that are labeled 0-2, and 2 Dword Files (ActiveSlidingSound and SlidingSoundEffect).
5. In that same directory, you need to make a new folder (key) and label it "3". Once that is made, you need to go inside that "3" which should be empty and have nothing inside.
6. Now you need to make a new String.Label the String "in" without quotes, and then set the string to "Slider3_in.wav". Now you should have one string inside folder (key) 3.
7. Now you need to make another String inside of folder (key) 3. Just follow step 5, but instead of using "in" use "out". So it should be labeled "out" and should be set to "Slider3_out.wav".
8. Next, create another String inside of folder and call it “Default” (no quotes). Now set that sting to whatever you want the new schema to be called (i.e. wind chimes, customer, etc).
9. Now head back to the registry: HKLM\Software\HTC\SlidingSound\, where you should now see folders (keys) 0-3 now and two Dwords files.
10. Now change Dword ActiveSlidingSound to 3, which is the new sound you created.
Disable the SMS Sent notification
Regisrty: HKLM\Software\Microsoft\Inbox\Settings\
Key: SMSNoSentMs (decimal)
Default: 0 (on)
New Value: 1 (off)
Note: Please note that the 'Settings' key may not exist in your device, and thus may have to be created first.
Storage Card Settings:
Mail Attachments
1. Go to Text/Multimedia --> Menu --> Tools --> Options --> Storage
2. Then check the box!
IE Storage
Registry: HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\Shell Folders
Key: Cache (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\Temporary Internet Files
Key: Cookies (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\Cookies
part 2a
Key: History (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\History
Note: Please see the “camera settings” to store pictures and video to the storage card.
Video from Portrait to Landscape:
Registry: HKLM\System\GDI\
Add key "Rotation"
Add Dword "LandscapeMode"=0
Move / Remove Startup Files:
1. make directory "\Windows\StartUpDisabled"
2. If you don't use MyFav5 Plan then copy "\Windows\StartUp\My5MsgCenter.lnk" to "\Windows\StartUpDisabled\My5MsgCenter.lnk"
3. If you don't use Voice Commands often (you can still manually start app) then copy "\Windows\StartUp\Voice Command.lnk" to "\Windows\StartUpDisabled\Voice Command.lnk"
Remove Services:
4. Go to "HKEY_LOCAL_MACHINE\Services"
5. If you don't use MyFav5 Plan (SMSCSend links to my5client.dll, I don't have My Fav plan, so I don't need this service)
a) save SMSCSend reg export somewhere for backup
b) delete "HKEY_LOCAL_MACHINE\Services\SMSCSend" from registry
6. Go to "HKEY_LOCAL_MACHINE\Services"
7. If you don't use Windows Live
a) save Windows Live reg export somewhere for backup
. b) delete "HKEY_LOCAL_MACHINE\Services\Windows Live" from registry
Other Services:
Other Services
"HKEY_LOCAL_MACHINE\Services\BTHIDSVC"
loads the Bluetooth Human Interface Device drivers and service
"HKEY_LOCAL_MACHINE\Services\BTAGSVC"
loads the Bluetooth Audio Gateway drivers and service
"HKEY_LOCAL_MACHINE\Services\BthAsPlugin"
loads Active Sync over BlueTooth service
"HKEY_LOCAL_MACHINE\Services\Trusted"
loads WSP Push, Push Router, SIM tool kit, SIM Init
"HKEY_LOCAL_MACHINE\Services\OBEX"
object exchange - protocol for data exchange between devices or syncing
"HKEY_LOCAL_MACHINE\Services\NOTIFY"
pop up notifications for events
"HKEY_LOCAL_MACHINE\Services\credsvc"
Credentials Manager
"HKEY_LOCAL_MACHINE\Services\CERTENROLL"
performs enrollment and renewal of certificates
"HKEY_LOCAL_MACHINE\Services\WirelessService"
Wireless Monitor Service
Increase voiceVolume:
Regisrty: HKCU\Control Panel\SoundCategories\InCall
Key: AttenuationCategory
Default: 2
New Value: 1
Regisrty: HKCU\Control Panel\SoundCategories\InCall
Key: InitVol
Default: 3
New Value: 10
Increase Voice Command Volume:
Registry: HKCU\Control Panel\SoundCategories\VoiceCommand1
Key: AttenuationCategory
Default: 3
New Value: 1
Registry: HKCU\Control Panel\SoundCategories\VoiceCommand1
Key: InitVol
Default: 5
New Value: 20
Better sound over A2DP
Registry: HKLM\Software\Microsoft\Bluetooth \A2DP\Settings
Key: MaxSupportedBitPool
Default: 30
New Value: 58
Registry: HKLM\Software\Microsoft\Bluetooth \A2DP\Settings
Key: BitPool
Default: 30
New Value: 58
Note: If not good enough, then delete: "MaxSupportedBitPool"=XXX &
"BitPool"=XXX.
Unlocks & Unhide the Extended Rom in Explorer:
Registry: HKLM\System\StorageManager\AutoLoad\TRUEFFS_DOC1
Key: bootphase
Default: 1
New Value: 2
Registry: HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
Key: mounthidden
Default: 1
New Value: 0
Registry: HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
Key: folder
Default: ?
New Value: Extended_ROM
GMail Settings:
You can access your Gmail messages from the Wing in three ways:
Set up Gmail as a POP3 account
Automatically forward Gmail
Access Gmail from the Internet
Set up Gmail as a POP3 Account
1. Log in to your Gmail account from your PC.
2. Select Settings at the top of any Gmail page.
3. Select the Forwarding and POP tab in the orange Mail Settings box.
4. Under POP Download, choose to Enable POP for all mail or Enable POP only for mail that arrives from now on.
5. Specify whether you want Gmail to keep a copy of messages in the Inbox when you access messages through POP.
6. Select Save Changes.
I. Auto-configure Gmail from your Pocket PC phone
1. Press Start --> Messaging.
2. Select New Email Account.
3. Enter your e-mail address and make sure the box is checked for getting the settings automatically
4. In the Auto configuration screen, wait until the Status changes from Connecting to Completed and then select Next.
5. Enter your name, user name, and password (DO NOT REMOVE the recent: from in front of the username that it automatically provides) and select Next.
6. Ensure Account type is set to POP3 and select Next.
7. Make sure that Incoming Mail is set to pop.gmail.com:995
8. Make sure that Outgoing Mail is set to smtp.gmail.com:465 and select Finish.
9. Select Yes to confirm that you would like to download mail for this new account now.
II. Automatically Forward Gmail to Another Account
1. Log in to your Gmail account from your PC.
2. Select Settings at the top of any Gmail page
3. Select Forwarding and POP in the orange Mail Settings box.
4. Select Forward a copy of incoming mail and enter the e-mail address to which you'd like your e-mail forwarded.
Now your Gmail will automatically be forwarded to this account.
III. Access Gmail from the Internet
If you don't subscribe to an unlimited data plan or need only occasional access to your Gmail account you may prefer to access your Gmail from your Pocket PC phone using Internet Explorer. To access your account through Internet Explorer, go to http://m.gmail.com.
alternate Gmail Settings
IMAP4 style
provided from Google!
http://mail.google.com/support/bin/answer.py?answer=78886&topic=12814
Part 3 Roms
Part 3 Roms...
Touch it and Open Touch are the popular Roms
as well as CleanROM
The roms are basicly rebuilds of the operationg system on the phone, and whats preinstalled. These roms are much faster and have more prog mem then the stock rom.
All WM6 Roms
The following is from papamopps @ XDA
http://forum.xda-developers.com/showthread.php?t=358030
Keyboard Fix For Roms
Thanks to duprade
http://forum.xda-developers.com/showthread.php?t=359696
I will not give advice to which is better. Use em and figure that out on your own
Part 4: Random Stuff
Part 4 : Random Stuff
Wing as a Webcam
Found at XDA
http://forum.xda-developers.com/showthread.php?t=348187&highlight=WING+AS+A+WEBCAM
Modifying and/or Removing Tray Icons
Remove the Tray Icon from Today Screen:
Registry: \HKLM\init\
Key: Launch92
Action: DELETE
Note: If you want to keep some but not all of the icons:
Registry: HKLM\Software\HTC\TrayApplet
There you'll find listings for each icon (the folders are for the WinWap, MyFaves, and CommManager tray icons). Remove the ones you don't want and soft reset. If you remove the music player settings, you will then have to uncheck the plug-in from Today items.
Part 5: T-mo Wing RUU - USA
Part 5 : T-mo Wing RUU - USA
From At XDA xavier6303
Found http://forum.xda-developers.com/showthread.php?t=321717
This will reset your phone, basically reinstall windows and all the phone, heard it works as a decent unbricker,
How to enter boot mode
Restart the phone and hold the voice and camera button
Please don´t post in this thread. All important things are mentioned. If something is missing please PM nyitalian - so he can isnert.
After all is in - the thread will be closed.
Thanks for this great thread!!!
updated with IMAP4 settings for gmail account connection
Feb 1st 2008
Hello !
I Installed this ROM:
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
and tried to deactivate the SMS Message Sent Notification with using the Registry Tweak:
HKLM/Software/Microsoft/Inbox/Settings -> SMSNoSentMsg = 1
But if i enter this new DWORD Value or Change anything else in the registry, every time i soft reset the Tweak works, but if push the button for standby and reactivate the device again, the Backlight Setting is Switched to 0 (no light). If i manually set it back to a brighter value and Go to Standby and Back again the light is off again.
Does someone know what went wrong here? Deleting the changes i made in the registry does not help. I used both Total commander and Resco Registry Editor for this. Only a Reset to Factory Settings discarded this error for me.
I Would very much appreciate it, if someone could help me out here. No One else could )
Thanx in Advance!
Update: Seems like every change i make concerning Systemfiles makes the above mentioned happen. I tried to copy a file to the windows folder, softreset -> backlight off after standby.
This is a summary of Diamond tweaks collected from various threads on XDA and from people's contributions. Thanks to all who discovered the Tweaks (not mentioning by name because there's too many to mention and all I did is aggregate). This is a collective effort so let's keep the list growing!
thread. Let's keep the comments in the Warning: Be sure you know what you're doing and read around the Diamond forums to see where others have run into trouble and with which tweaks on which ROMs. Many people have had to Hard Reset their devices while others have had no problems so read up!
1. Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
2. Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
3. Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "1" (FIXED: thanks KuKuRiKu and everyone)
5. Change CallWaiting Tone --> HKLM\Software\HTC\PHONE : by default set to \windows\waitingtone.wav by default. change to anything else
6. Boost TFL3D Scrolling Speed --> - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 or 32768 (DWORD decimal)
- To change it back to the default: - HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
7. To do a Hard Reset, with the phone ON, hold down the Volume Down and Enter (round navigation) keys and press soft reset while they are pressed
8. Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall to 0 (Note: does not work on all ROMs)
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
9. Downlod original CONTENT folder (Wallpaper, VIDEO, MUSIC) here http://rapidshare.com/files/121271047/CONTENT_Internal_storage.rar.html
10. Set HTC Album X button to close not minimize:ok_minimize change value to 0
11. Disable Enlarged Title bar (when you click on a notification) to the default WM behavior: HKLM->Software->HTC->EnlargeTitleBar - and change "Enable" from 1 to 0.
12. Turn off startup aninmation and sound: HKEY_Local_Machine\Software\HTC\HTCAnimation\ -> rename both "StartupGif" and "StartupWav" to other names
13. Enable GPS photo: HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P10 -> change the value "enabled" from 0 to 1
15. Another supposed TFL3D tweak for better performance: HKLM\Software\OEM\TFLOSettings:
SpeedHigh: default value (25) <-- Change to (5) / SpeedLow : default value (70) <-- Chnge to (14) save and soft reset
16. Adjust screen sensitivity: HKEY_LOCAL_MACHINE\Drivers\TouchPanel
Value = PressureThreshold
Change from the default dword:00000027 or 34 to dword:000000f0 or 240 in decimal
17. Lightsensor Switching the Screen off- realised by yelitterulez, confirmed by pietrucci and tested by myself. When making a call the screen stays on if you leave the phone lying flat on a table. If you wait 10 seconds into the call, you can pick it up to your ear and the screen stays on.
BUT if you make a call with the phone slightly tilted/ slanted (you get the idea), the screen turns off as soon as the call gets connected!
The moment you hold the phone to your head the blacklight turns off. In fact: the moment you hide the screen with anything it turns off! (try your hand...).
This might be the reason why everybody's complaining about the screen turning off during a call: you hold the phone to your head! When you turn the screen back on manually, it stays on no matter if you hold your hand or head...
18. Automatically lock your Diamond --> HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
19. More Camera Modes:
To Enable 'Burst': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P6 -> change the value "enabled" from 0 to 1
To Enable 'Sport': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P8 -> change the value "enabled" from 0 to 1
To Enable 'Video Share': HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P9 -> change the value "enabled" from 0 to 1
20. Delay device autolock: HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLockTimeout -> Change the Dword value (30 = 30 seconds, etc)
21. Enable Manual Screen Rotation (Portrait/Landscape): HKLM - System - GDI - Rotation - HideOrientationUI (change from 1 to 0)
22. Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
23. Show Weekday in TFL3D (thanks to pulp) - download and install http://rapidshare.com/files/127174792/weekday.cab
24. Enable HSUPA:
HKLM\Software\HTC\AdvancedNetwork\SupportHSUPA =change it to 1
25. Enable Audio Booster without headset-->HKLM/System/State/Hardware/Headset set the value to 1 (soft reset will bring it back to 0)
26. Add a Call History tab to TF3D (discovered by sushilange, spread by Fabliv) --> http://forum.xda-developers.com/showthread.php?t=410180
27. Add new Cities to TF3D http://forum.xda-developers.com/showthread.php?t=408918 - thanks to R. DevilR
28. Remove orphan icons and shortcuts - http://forum.xda-developers.com/showpost.php?p=2461697&postcount=3
29. Four icons in a row in WM Programs/Settings screens - http://forum.xda-developers.com/showpost.php?p=2462244&postcount=16
30. Remove Vertical and Horizontal Scrollbars
For the horizontal (bottom) scrollbar:
HKLM\System\GWE\cyHScr = 0 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxVScr = 0 (DWORD decimal)
31. Remap Manila softkeys:
HKLM/Software/HTC/manila/
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
HKEY_LOCAL_MACHINE\Software\HTC\HTCAlbum :
32. Change system and context menu font size:
HKEY_LOCAL_MACHINE\system\gwe\menu\popfnt
and change the value for the "Ht" entry to "1000" decimal (from 1200)
33. Increase maximum picture size when shooting in Burst and Sports mode:When activating "burst" and "sport" the max size of the pictures is "L" but if you change:
HKLM\SOFTWARE\HTC\Camera\P8\MainCamCaptSize value to 1024
and
HKLM\SOFTWARE\HTC\Camera\P8\MainCamSupportCaptSize to 1744Do the same for P6 and you can now shoot in these modes up to 3M and not just L - thanks to nnevynn for
34. Get Blackberry Connect working on your Diamond!! (thanks to cybertech99)
http://rapidshare.com/files/114522380/BBConnect_WM6_Profession.cab
35. Disable Diamond Phonepad Skin
HKLM -> Security -> Phone -> Skin -> Enable (set 1 to 0), then reset.
36. Enable Better Power Management
HKLM\Drivers\SDCARD\ClientDrivers\Class\SIM_Class
Set DisablePowerManagement = 0 (default=1)
HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class
Set DisablePowerManagement = 0 (default=1)
HKLM\Drivers\SDCARD\ClientDrivers\Class\NAND_Class
Set DisablePowerManagement = 0 (default=1)
nice one on the sms wake. We should expand the list! THanks!
Update:
Thanks for updating the list!
Since I don't see a tweak for Disabling SMS Conversation (The costly SMS Chat) I will post it here!
Disable SMS Conversation in WM 6.X
In Registry Editor: Create a folder named "OEM" in "HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings"
In the new "OEM" folder, make a new DWORD key called "SMSInboxThreadingDisabled" and give it a value of "1"
That will disable the SMS conversation. When you click on the messages on the SMS tab on TF3D, it will take you to the normal SMS inbox instead.
Hope it helps
thanks a lot, keep going please
Great!
This is very useful and it helps solve a lot of problem. Will the cache size change make the D unstable?
For some they say it has...but for me, my device is running great!
mkhattab said:
This is a summary of the proven tweaks taken from the Diamond Tweaks thread. Let's keep the comments in the Diamond Tweaks thread and keep this one as a list of the actual tweaks only to be an easily accessible summary. Thanks to all who discovered the Tweaks
1. Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
2. Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
3. Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
4. Switch Mute Call on phone flipped face down: HKLM\Software\HTC\PHONE : FaceDownMuteRing: change value to "0"
5. Change CallWaiting Tone --> HKLM\Software\HTC\PHONE : by default set to \windows\waitingtone.wav by default. change to anything else
Click to expand...
Click to collapse
I have had a real issue with number 2, I had to do a hard reset after changing the Cachesize to 32768. During startup the device hanged and wouldn't load up the touch flow, nothing worked.
saveferris said:
I have had a real issue with number 2, I had to do a hard reset after changing the Cachesize to 32768. During startup the device hanged and wouldn't load up the touch flow, nothing worked.
Click to expand...
Click to collapse
I had the exact same problem, wouldn't recommend this one.
saveferris said:
I have had a real issue with number 2, I had to do a hard reset after changing the Cachesize to 32768. During startup the device hanged and wouldn't load up the touch flow, nothing worked.
Click to expand...
Click to collapse
Yes, I had same problem.
Hmm afaik 'File system cache' in 1) is the same as the key HKLM\System\Storagemanager\Fatfs\cachsize in 2).
So tip 1 sets it to 8mb, and tip 2 changes it from 16mb to 32mb. So that suggests its 16m to start with?
Sounds like the file system filter cache is whats making the main difference. Thats this key:
HKLM\System\StorageManager\Filters\fsreplxfilt\Rep lStoreCacheSize
Can someone maybe post the original values of these two keys?
someone1234 said:
Hmm afaik 'File system cache' in 1) is the same as the key HKLM\System\Storagemanager\Fatfs\cachsize in 2).
So tip 1 sets it to 8mb, and tip 2 changes it from 16mb to 32mb. So that suggests its 16m to start with?
Sounds like the file system filter cache is whats making the main difference. Thats this key:
HKLM\System\StorageManager\Filters\fsreplxfilt\Rep lStoreCacheSize
Can someone maybe post the original values of these two keys?
Click to expand...
Click to collapse
There are 3 values to be changed.
1. The Icon Cache which is suggested to be changed to 131072. The registry setting is:
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00020000
The value is shown as hexadecimal, which is equivalent to 131072 in decimal.
2. The second value is to be changed in FAT File System cache.
3. The third value is to be changed is Filters File System cache.
The cache sizes in #2 and #3 are usually kept same, for example 32768 decimal (32MB). Though, this eats up a lot of memory, but makes the system very fast. Lately, I have seen in KaiSer and Universal that these values are set as dynamic values.
Hope this is helpful.
KOR!
anyone know which registry key can make the phone not blank the screen when answering call?
lwclam said:
anyone know which registry key can make the phone not blank the screen when answering call?
Click to expand...
Click to collapse
Yeah, people do know. Search for it.
Just read about a 'tweak' in another thread. It seems disabling "GPRS auto attach" in Advanced Configuration Tool helps in preserving battery live.
Read about it here: http://forum.xda-developers.com/showthread.php?t=395301
For me turning that option to off would be best solution as well. Even more so if it really helps save the battery.
Since I don't have a Diamond yet I havent gotten a chance to actually test this tweak.
Another thing I've found eats up a lot of battery life is the schedule to check email. I have my Direct Push set to an Exchange account and a second Internet Email account. Changing the frequency of checking the second account really makes a difference.
mkhattab said:
Another thing I've found eats up a lot of battery life is the schedule to check email. I have my Direct Push set to an Exchange account and a second Internet Email account. Changing the frequency of checking the second account really makes a difference.
Click to expand...
Click to collapse
agree. my setup is similar to you. i was using 10 mins to check my second IMAP account, i have only around 9-10 hrs standby time. Now, i changed that IMAP account to check in every 60 mins, now, standby time is extended to more than 12 hrs.
what was the previous default File system cache and file system filter cache setting, cause my phone has slowed down since i have changed it. please reply back to me as soon as possible. thank you
http://forum.xda-developers.com/showthread.php?t=397935&page=8
posts 75 and 76
Thanks alot for the fast reply, and just one other question did any one arabize the diamond cause i have tried but it says installation not done. Thanks again man
sorry guys...noob question
to get the SMS to wake up the phone,
where is the HKLM folder in registry?
wishmaker738 said:
sorry guys...noob question
to get the SMS to wake up the phone,
where is the HKLM folder in registry?
Click to expand...
Click to collapse
Read the first post in this thread!
I've been trying to find the registry setting for the start button. I know you can do this with the settings but thing is with TF3D it reverts after a power-off to the setting of 'Today' So I'm trying to change it with the registry instead. Somebody know of the registry setting?
Hello,
Can someone please let me know what the reg settings are to restore the "Programs" right softkey?
The keys are in HKLM\Software\HTC\Manila:
HomeRSKArguments = ?
HomeRSKPath = ?
HomeRSKText = "Programs"
Cheers
Registry settings...
Hi...
I've checked the settings you're asking for on my device, and they're all empty! The keys are there as you've stated, but the values are nil... and my device has the Manila default softkeys
You could try Advanced Config tool to set it up?
Hmmm, I've tried setting the keys to blank but it doesn't work. Looks like a soft reset is needed...