Database Develop

Stupid screen protectors and Air Bubbles

So I had my original Att screen protector on my tilt for over 3 months..then this week I went to the tmobile store and bought screen protectors cuz mine was old and wear and tear set in. Come to find out when I get home and unbox it...its the kind that's not alrdy fitted for the phone screen and you have to cut it out and size it yourself..theirs a reason why like 15 screen pro's come in the box...I nearly went through the whole box trying to use scissors and cutting and itting the stupid things myself...I shoulda went to ATT cuz I think their screen pro's come fitted for touchscreens. Anyway after finally fitting it to my tilts screen..I got another problem, Air f#*king bubbles!....anybody have this issue and figured out how to put on screen pro's without stupid air bubbles?

use a card (credit card, atm, license) and smooth it out little by little when applying
works perfectly for me

The screen protector that came with my Tilt isn't EXACTLY the same size of the screen. I managed to put it on as soon as I had it in my hand (still in-store before paying the guy). The bottom of the screen looks perfect, but at the top of the screen there is a gap of uncovered screen about the 1/16th of an inch. Doesn't bother me though...

The best thing you can do to avoid air bubbles is to buy a quality, reusable screen protector. I bought mine 9 months ago from DayDeal.com, and it still works great. Since it not that super thin plastic, it goes on without any air bubbles. Well worth the $15.

I have ordered the Invisible Shield from http://www.zagg.com/
Haven't got it yet, so I can't share any personal experience, but this was highly recommended on a norwegian PDA forum.

Wow, my screen protector is on it's 10th month and it looks as good as the day I put it on. And it's a $5 cheapy one from Pocket Solutions.

I have been using the JavoScreen Ultra Clear screen protectors for a few years no, and have been very happy. They are completely removable, washable, replaceable without leaving residue; and they do not trap bubbles. Once applied, you literally cannot tell that it's there! They are a few more dollars than some other similar brands, but they are IMHO the best.

I've just given up on them. The glass feels better without one.

squeeze the big ones out by just pushing them off to the side with your fingers. the smaller ones should go away after a few days use.
on a side note, my screen protector that came with the phone SHIFTED somehow, and i cant move it back (well i dont want to peel it off and restick it). odd.

tdusen said:
I've just given up on them. The glass feels better without one.
Click to expand...
Click to collapse
same here.

moegdaog said:
So I had my original Att screen protector on my tilt for over 3 months.. Come to find out when I get home and unbox it...its the kind that's not alrdy fitted for the phone screen and you have to cut it out and size it yourself..
Click to expand...
Click to collapse
You guys will probably think I'm nuts, but I swear by WriteShield product from PocketPCtechs. Expensive, but worth it. The plastic they use is superior, it's absolutely crystal clear, and it's cut perfectly to fit.
I've experimented with other cheaper products that didn't last or didn't fit right. I've tried the cut-them-yourself products (boxwave) and they didn't work out right for me either. I went right back to the WriteShield and no worries.
At one time, I thought to myself that spending so much on screen protectors was nuts, and what they charge for shipping added insult to injury, but then I put it into perspective. What's it worth to protect a $600 machine? What's it worth to not have to be without the machine while I have my screen serviced and what would the combined cost of the hardware labor and inconvenience be?
I've used them on every PDA I've owned and I'll never look back. I have yet to find a better product out there.
Link is here: CLICKY

Hi,
Someone can say me if WriteShield Screen Protector fit exactly the screen size of the Kaiser without leaving some screen surface unprotected ? Or which one fit exactly the screen's size ?
Thanks in advance
Moo

VTECaddict said:
squeeze the big ones out by just pushing them off to the side with your fingers. the smaller ones should go away after a few days use.
Click to expand...
Click to collapse
This
Plus, don't use a card to squeeze out the large bubbles -- I did this once and ended up with scratch marks. Just use your fingers, and the small ones should vanish with time.

Diamond Protection and anti finger print - invisibleSHIELD

invisibleSHIELD - Look it up for the Diamond my mate got it and it hardly shows any finger prints even after a days use and smudges whilst retaining the sheen of the device, also your back and front will be fully protected whilst keeping its form factor... if you have microscopic scratches like mine on screen that are obvious in well light conditions they will also disappear after application- ordered mine already...
Review and good pics... http://joeygadget.com/2007/08/15/on...-shield-screen-protector-for-iphone-and-treo/
They are available on ebay in most countries for Diamond - make sure you get the legit one as I am sure there are **** counterfits...

The ones for the iPhone are very hard to install and keep all of the little bubbles out, have plenty of patience when installing.

Although it is tough, the appearance after installation is extremely ugly.
Esp the screen.( no more grossy). I finally uninstalled it ( my wife said that my diamond is very ugly after the invisible shield, looks like an old PPC) and use other anti scratch screen protector and silicon case for body protection.

I have invisible shield for both 3g iphone and touch diamond...installation was easy actually but it doesnt look nice....u can tell theres something on the screen.
Would not recommend

I've already ordered one but couldn't installed it properly. It was very very hard and although I tried to be very carefully, still a lot of bubbles remained under the iShield. I put it off again and now I've got no screen protector anymore. Instead I use the original pocket case to wear the Diamond in my pocket. I think my fingers won't be able to scratch the display when touching it

Thanks for all the feedback
Interesting after install my friends one looked alright to me... hmmm I will post some pics after install and post my findings...
Anyone have a positive experience?

My friend's iPhone 3G looks MINT with it, literally can't tell it's there... But it was a ***** to install, especially around the corners.

I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.

shinobi_uk said:
I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.
Click to expand...
Click to collapse
Might make it look plastic, but I really can't say since my friend's iPhone IS plastic. Heh hopefully yours works out better, OP.

Mixed Views
Such mixed views - I have a feeling its down to having the patience to do the install properly - same my mates Diamond looks mint... hmmm

I had one of these for my Diamond and wasn't happy at all. I'm a very patient person but after a while it was just getting on my nerves. Trying to get it to bend around the case without leaving any air bubbles was just impossible. The parts that did stick down OK didn't look that nice either. It has a strange rubbery feel to it that I just don't like at all. I ended up ripping it off in frustration. Looked at their site and you can get your money back but you have to send it off to the states and I can't be bothered with the hassle or cost so I've just chalked it up as experience and will not recommend the product to anyone at all.

i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices

nuumuun said:
i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices
Click to expand...
Click to collapse
Would be great if you can post some pics front and back at a few angles in high light - not too much too ask surely lol oh and maybe put a cherry on top.
But seriously some pics would be great...

75% off any zagg invis shield!

Everyone go to zagg.com/theshack.
This is supposed to be expired but its still spitting out codes. Use any bogus employee code ( really put anything in), then just use an email that hasent been used yet. I've tested it out already so it works. Just use the code quick

frostrunner said:
Everyone go to zagg.com/theshack.
This is supposed to be expired but its still spitting out codes. Use any bogus employee code ( really put anything in), then just use an email that hasent been used yet. I've tested it out already so it works. Just use the code quick
Click to expand...
Click to collapse
Hey thanks! I just ordered the full body kit, came out to 9 bucks after shipping

are they any good?

i dint work on the custom invisible shields covers and other stuff i wanted to try ..neither the battery thing ...

So many people say its a PAIN IN THE ASS to get them on.

Well I will take mine to the mall where they have a kiosk for invisible shields they will put em on for ya for free and if they f up or you don't like the way they do it, they'll give. You a new one for free

I have always used bodyguardz.com. They cover the entire phone, and easy to put on. 2 full body sets 24 bones. Custom cut for each phone, and work great.

Heh, I've had a zagg full body for my Hero for probably about like 2 weeks probably longer. Its still sitting on my kitchen counter...

@jvz -
Sure, it's a PITA to get them on, but the alternatives aren't exactly much easier. Each brand is slightly different, but overall results are comperable.
ZAGG -- Most recent purchase (month ago) included a 'sponge' as a fluid applicator, plenty of fluid in the 'cup' that held it, and was a nearly perfect fit for the screen area on my Sprint Hero. Yes, the InvisibleShield feels a bit 'tacky' after first application, moreso than Bodyguardz, but most of the excess friction (and any remaining cloudiness under the cover -- minimal) seems to go away after a few days. Overall, ZAGG does exactly what it claims. Caveat: if you get particles between the screen and the cover during application, either live with them, or get a new cover and start over -- if you try to 'lift' it and re-apply you will end up making things worse. Apply it well the first time, and you are good to go.
Bodyguardz -- Most recent purchase (6 months ago) included a 'pump-spray bottle' as a fluid applicator, and perhaps not quite enough fluid for applying a full body set, although the bottle could be refilled from the tap a few times. (most applicator fluids are nothing more than water with a drop or so of a lubricant like baby shampoo). The screen piece fit my old Touch Pro just fine, but the body pieces were in many cases a few millimeters too long or too short, depending -- not perfect coverage. The pieces are easier to 'slide around' during application than say, the ZAGG shield, but you will still risk trapping particles if you feel the need to 'lift' and start again. Apply it right the first time -- no matter that brand. Overall, the 'feel' of the Bodyguardz was excellent beginning on day one -- visibility was initially marred by cloudiness that went away within a few days. The body pieces began to pickup dirt and peel within a few weeks, although the screen and button pieces stayed admirably affixed until removal.
ZAGG vs Bodyguardz -- No winner. Different, but similar, including performance under various lighting conditions. ZAGG might be slightly harder to install, but not by much. Bodyguardz might feel 'smoother' on day one, and ZAGG might look 'clearer' on day one, but by a week in they are practically indistinguishable to anyone who isn't used to the subtle differences.
/2cents

I personally use wrapsol. I tried both invisible shield and wrapsol. Invisible shield is a solid product but after a few months, it starts to turn yellow and it starts to feel rubbery. Application is a pain in the ass to install for invisible shield but rather easy on wrapsol. They stop selling the front screen protector for wrapsol, all they sell now is the full body protection kit.
Just my two cents

Regardless how well they work, you won't find anything like this for 6.25 (plus shipping and handling)
I just ordered 3 and it was 24 dollars and some change.
Thank you for this post!

great find, wanted to get one before just didnt want to pay full price,

I too ordered one !!
I just hope they will ship to india without any problems

I ordered 2, 15.49. Can't beat it.

thanks for this!

better yet guys -- you can get it for FREE!
zagg.com/blueshirt/index.php
The form only verifies that it has @bestbuy.com in it. So if you know how to wrangle DNS/email you can setup something like this:
[email protected]
and you'll get the coupon for a FREE one

wish i would of seen this last week when i bought my hero. oh well i only paid $22 for it at bestbuy.

I ordered two and they got here for $15.
I just opened the packages and am having a hard time with it. I haven't even started trying to apply them, I am just trying to decide if I even want to.
They feel really grippy. The whole point of the touch screen is that it is smooth as silk so your fingers slide across it easy. With this zagg stuff, I am not sure that they will.
Also, I have the sprint hero. It has that sort of charcoal brown finish on the back. It is really smooth and nice feeling. It is actually my favorite thing about the phone.
After applying this zagg stuff, the phone will now be glossy and not smooth anymore. There is no way around it. I was hoping these films might show up and when they harden, feel as hard and slick as glass. Instead, I am faced with the choice of taking away the properties of my phone that I am in love with, for the advantage of keeping it scratch resistant (two month and no scratches anyway...)
What do you guys think? Anyone feel the same way I do?

flexgrip said:
I ordered two and they got here for $15.
I just opened the packages and am having a hard time with it. I haven't even started trying to apply them, I am just trying to decide if I even want to.
They feel really grippy. The whole point of the touch screen is that it is smooth as silk so your fingers slide across it easy. With this zagg stuff, I am not sure that they will.
Also, I have the sprint hero. It has that sort of charcoal brown finish on the back. It is really smooth and nice feeling. It is actually my favorite thing about the phone.
After applying this zagg stuff, the phone will now be glossy and not smooth anymore. There is no way around it. I was hoping these films might show up and when they harden, feel as hard and slick as glass. Instead, I am faced with the choice of taking away the properties of my phone that I am in love with, for the advantage of keeping it scratch resistant (two month and no scratches anyway...)
What do you guys think? Anyone feel the same way I do?
Click to expand...
Click to collapse
i never buy the full body skins. i only buy the screen one, that's all you need. just be careful how wet the phone gets when applying, i killed a brand new palm pre once.
anyways it will feel a bit sticky for awhile, like a day. after that you won't notice a big difference in touch and feel. i do know when i first put mine on my hero, the screen acted funny for about an hour until it sorta dried, like the touch wasn't responsive. it's perfectly fine now.

Thank you thank you thank you. The website says 75% off a single item, so I didn't even bother trying to add more. Damn, paid extra $3 for another shipment. Still, I saved $37 off retail, so still not a bad deal at all. Have used these and recommend them all around; they do have a kinda weird texture, yeah, but they're almost bullet-proof.

My thoughts about the lack of good glass screen protectors on S6 Edge and solution

Hello XDA!
First of all, I'd like to wish a Happy New Year to everyone on this board! May 2016 be a fenomenal year to you guys!
I'm opening this conversation because I wanted to share my thoughts with you regarding this problem that owners of the Edge/Edge+ variant are facing: the lack of good glass screen protectors.
I've been looking for this device for a couple of days now (I still don't own it) to replace my current smartphone, and after doing a little bit of research and also for curiosity (to know if a curved glass would have a glass SP), I encountered this problem across the internet, and I don't know how long it will take to be solved.
What I'd like to share with you guys, is the current question: what if you don't use a Screen Protector? I mean, after looking around I encountered some problems regarding it:
Sensitivity is heavily impacted by these SP
The majority of these Glass Screen Protectors aren't cheap, with many ranging between $30 to $40
Man, they're ugly. I mean, to acomodate part of the adhesive or glue that will keep the SP on the device, the majority of the units have the top and bottom parts colored, which acomodate these adhesives. And here we have some problems: sometimes they don't match the device color or even fit the holes properly for the home button and others.
They don't stay on the device for long period of times. In my view, are easily disposable
And my solution to this is pretty simple: if you end up getting the screen badly scratched, or even cracked, you can just replace it with another front glass. And in my opinion, it is totally worth it, from a user experience and also economical view (I'll show the values below).
A device like the S6 Edge is not cheap, and what I think is that you end up losing a great part of the experience of the device by putting these kind of SP on. I tried the smartphone on a couple of stores yesterday and the touch and feel of the edge of the screen is just too nice to be impacted by a poorly-made SP.
Funny thing is that I never thought about that until today. I actually have a Moto G (2013), and initially I wanted to be so careful with it that I bought a couple of cases. But over the time I noticed that it completely destroys all the design and feeling of it in the hand. After a couple of months, I quitted using these cases and have never been happier.
With the screen I am still very careful, using a glass screen protector on it, but after thinking about it today I don't know if it is worth it. There are plenty of very good glass screen protectors out there, but you can't beat the sensitivity and feeling of the screen without any SP.
A lot of people (including me) tend to be very careful with it's devices, and it is completely normal, but I think sometimes we tend to give a lot of attention and concern to it and we end up not experiencing everything the gadget has to offer.
In the future we are going to have even more technologies that depend exclusively on the screen, such as the 3D Touch, perhaps more curved smartphones and even a fingerprint scanner built inside the screen, which will make sensitivity even more important, and so the need of really good screen protectors. Thinking about the possibility of replacing the screen gives us another choice if we don't want to use these SP's or pay for costly ones.
Well, about the possibility of replacing the Edge's front glass, I did a fast research on Ebay and found an item that the seller claim is original, for just $19.99:
http://www.ebay.com/itm/Original-Fr...hash=item35f722b753:m:m_MYRYEwbj9-1tKN3fQP5MA
And also another one, unbranded, for $15.70:
http://www.ebay.com/itm/Front-Glass...373893?hash=item3cfb40ecc5:g:XB0AAOSwrklVbrar
I'm sure that with a lot more research and time we can find many other items.
Of course, the procedure to replace it requires a lot of effort and is kinda risky, but we can find some tutorials on Youtube, like this one:
https://www.youtube.com/watch?v=S_OPjGnaIy0
What do you guys think? I just wanted to post this as I saw many users concerned over the protection of their screens, and with it bring some sort of second option for you.
I'm really looking forward to your opinions around this and some sort of feedback from my thoughts would be really nice.

As a user of screen protectors (not necessarily tempered glass, I've always has plastic protectors), I feel that the trade offs from aesthetics (a little misaligned cutout here, etc.) to cost are nowhere near as much as the repair costs for replacing screen parts. It gives me peace of mind knowing that I have at least /some/ protection on the screen. I'm very careful with my devices but there are just times where a protector would come in handy for things that are beyond my control (like getting your phone knocked off your hand by some random passerby, kids running, those kinds of things.) I think I'd also rather have the trade offs than endure the struggle of trying to replace the screen by myself. Plus, if you're planning on reselling the phone in the future, phones with the original parts tend to be valued higher.
Now while replacement screens are readily available, as with the case of some third-party supplies, quality problems such as color casts, etc. are problems for meticulous users. From personal experience, I've had phones break and had fixed elsewhere aside from the manufacturer's service center only to regret it by getting darker screens, lesser color vibrance, etc. compared to the original. Often times, when the glass breaks, it takes the screen and other parts down with it; thus costing you well more than just the 15 USD for the glass replacement, so I guess that's also another way to look at it.

I've had various mobiles for many many years (I'm 64) and have always used a case and a protector for the screen, and never had a damaged phone. I order all three at the same time and don't use the phone until everything has been delivered.
The edge presented a problem that we're all familiar with so I went for this one despite the £18+ cost. http://www.amazon.co.uk/gp/product/B014CE6CL0?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00
Everything was great, easy to apply, no bubbles and looked great..... then I fitted the Otterbox case! Disaster, cracked protector and £18+ down the drain.
Currently, and for the first time ever, I'm using the phone with no screen cover. I feel naked, but don't feel like risking another glass one.
Any answers welcome?

Zagg just confirmed a tempered glass by February; the problem is that it may have to be installed at the kiosk.

I just use cheap TPU screen protectors from ebay, they require soapy water to be mounted so you get them in the exact place, then you squeegee the water out and let the edges to dry up so you can stick them down, they settle fully after a few hours and look great. they can be a nightmare to put on and I would say they have around slightly less clarity than glass but they cover the whole screen and do they're job just fine.
TPU has very good shock absorbing properties so I think they will help resist screen cracks like tempered glass.
http://pages.ebay.com/link/?nav=item.view&id=221893323852&alt=web

no matter how careful you are , the phone will still hit the ground somehow , always happen when you just woke up , glue to the screen and some dude bang onto you , off the phone flys , fyi most shops dont replace the glass alone , its comes as a set (much easier and fuss free ) , also direct impact drops can crack the lcd internally without glass cracking .

An Ongoing Chronical Of The Whitestone Dome

I have read many mixed reviews of this glass screen protector here, on other forums, and on Amazon.
Amazon's the best, IMO, because you're reading product reviews from real everyday normal folks from all different walks, so the compilation of reviews includes the whole range of skill level.
Inarguably, the Whitestone Dome Glass protector is probably THE MOST difficult to install, save the fact that the kit includes an allignment jig that helps installation inmeasurably. I recently did this (this evening) and can't imagine attempting this without such a jig, though I understand similar UV activated glue is available to use with separately sold glass protectors.
So I'll start with some background info to set the scene for accuracy...
I'm a landscaper by day, but a jeweler part time. That means I chunk heavy crap around all day long like a farmer, but on the weekends I show off my dexterity like a watchmaker.
That's important, because this installation requires steady, confident hands, much forethought, patience, and it ain't cheap!
Sooooo...
Let me say that I was really nervous. I already accepted the idea that I might have to decide whether to purchase another one or go a different route and just choke on losing 45 dollars.
I watched 8 YouTube videos on installation, including one completely failed installation, and a demonstration on the removal of one.
The package arrived today but was outside the house in the cold. Of course I wanted to pop it on immediately, but figured that it should warm up to temperature first.
During that time I prepped my table. I used a marble to see if it was level. During preparation, i also prepared myself for the possibility of failure. LOL!
I layed out all of the items like I was about to perform surgery.
CLEAN, CLEAN, CLEAN!
Use those dust removal stickers! Even after you let the glue fall and remove the "bridge", check again for dust.
Don't flail about to much. That simply stirs up dust.
"Relax", is the best advice I can give. Peeling the backing off the glass from underneath it so dust that's in the air doesn't land on the inside surface sounds like a logical idea, and you should, but static from peeling it can become a pain.
If you're calm enough, you can do this just like the videos.
I wiped the edges after the first and second curing with the UV light. I did end up with excess flow out one side, and on the other side during the second wipe down, I had an ever so tiny bubble (if you'd even call it that) on the edge. The bubble was from wiping away the partially curred glue, which pulled a tiny, TINY bit out. (Literally one third the size of the exposed part of the SPen tip.)
I remedied this OCD-killer by using a toothpick dabbed in what remained at the top of the glue tube and simply touched it to the edge, which sucked it right in to fill the tiny void.
I used the UV light several times with the idea that it simply couldn't hurt to do it as often as I could.
My screen literally looks like a perfect install. Absolutely fantastic, as Sakitech would say!
I would say the skill level required for this is about average, but you really have only one chance to get it right, and there are a few steps that need to be followed perfectly or else they can trip you up.
Watch those videos. Many show people doing an imperfect installation with decent or good results, but after watching several you'll see just how to avoid mishaps.
On a different note, I did notice something very strange while utilizing the UV light; there is a weird shape in the center of the screen that shows up under the light. I have no idea what it is, but it shows as a slightly different color in the center third of the screen, nearly full length with rounded corners and perfectly symmetrical. I'm assuming it's an adhesive beneath the screen for the interactive SPen screen? I dunno. Kinda neat.
Anyway, after reading reviews stating problems with lifting of the edges of the Whitestone Dome, I figured I would contribute here by checking in and giving updates as to the longevity of this very beautiful, but slightly expensive and fiddly (to say the least) installing screen protector.
Feel free to ask any questions.

O.K., so not a month, but 3 weeks later:
Bear in mind that I do NOT abuse my phones. I do tend to coddle a nearly $1000 phone.
So far the screen saver has been great. No lifting at the corners like others have experienced.
I have my Note 8 in an Amovo wallet case- Good stuff; check it out on Amazon.
I remain thrilled with my Whitestone screen protector.
I certainly cannot say that I don't notice that it's on there, but it's only the edges that I can see. While I'm immersed in actually using the phone, I notice nothing at all.
I'm now considering getting one for my S8+, which currently sports a cheap edge adhesive glass screen saver that feels like there's room to slide a business card under.

AddictedToGlass said:
O.K., so not a month, but 3 weeks later:
Bear in mind that I do NOT abuse my phones. I do tend to coddle a nearly $1000 phone.
So far the screen saver has been great. No lifting at the corners like others have experienced.
I have my Note 8 in an Amovo wallet case- Good stuff; check it out on Amazon.
I remain thrilled with my Whitestone screen protector.
I certainly cannot say that I don't notice that it's on there, but it's only the edges that I can see. While I'm immersed in actually using the phone, I notice nothing at all.
I'm now considering getting one for my S8+, which currently sports a cheap edge adhesive glass screen saver that feels like there's room to slide a business card under.
Click to expand...
Click to collapse
Same here with mine. Very satisfied. Nearly 3 months now and it's been rock solid for me.

Same here, great bit of kit.

Agreed - I love my Whitestone. It picked up a scratch, and I used the new warranty facility to replace it. It's not exactly cheap (around £20) to get the replacement, but it's better than having to buy one at full price.
This one ended up being a little more fiddly to install, but that was my fault - I allowed the LOCA to flow too far towards the bottom of the device before dropping the glass. I had tiny cluster of bubbles near the power switch which I worked out with some patience, and I also ended up sticking the jig together because I cured it for too long before removing the phone. However, the overall result is better than my original install, and I haven't had the touch up the edges of this one at all.

As much as I want to use the whitestone, I have some pretty big issues with it right now. For one, the glass is unnecessarily big. If the flaps that went up around the top were just a little smaller, it'd be compatible with so many more cases. The other issue is the type of glass their using. I don't know what it is, but it collects oil and gunk REALLY well on the surface of the glass (not the edges). I especially notice it on colder days (which we have plenty of in minnesota), but it's like the oil builds up into a thick layer that I have to wipe off with a cloth. All my whitestones have been like this. I ended up ordering a cheap full adhesive protector from amazon, and even though it has that STUPID black border and doesn't stick at the edges properly, it's sized way better than the whitestone and the glass feels of a much higher quality.

jooniloh said:
As much as I want to use the whitestone, I have some pretty big issues with it right now. For one, the glass is unnecessarily big. If the flaps that went up around the top were just a little smaller, it'd be compatible with so many more cases. The other issue is the type of glass their using. I don't know what it is, but it collects oil and gunk REALLY well on the surface of the glass (not the edges). I especially notice it on colder days (which we have plenty of in minnesota), but it's like the oil builds up into a thick layer that I have to wipe off with a cloth. All my whitestones have been like this. I ended up ordering a cheap full adhesive protector from amazon, and even though it has that STUPID black border and doesn't stick at the edges properly, it's sized way better than the whitestone and the glass feels of a much higher quality.
Click to expand...
Click to collapse
Strange, no oil/grease issues like that with mine and it's plenty cold here too (unfortunately!). I haven't even had to wipe often for fingerprints and stuff. Not sure what would be causing that type of problem.

sefrcoko said:
Strange, no oil/grease issues like that with mine and it's plenty cold here too (unfortunately!). I haven't even had to wipe often for fingerprints and stuff. Not sure what would be causing that type of problem.
Click to expand...
Click to collapse
Agreed - I would say it has one of the better oleophobic coatings.

StevePritchard said:
Agreed - I would say it has one of the better oleophobic coatings.
Click to expand...
Click to collapse
Maybe I've just been getting bad batches? idk.

I've had no problems with mine. Looks and works great! My wife's has started to come up on a corner. It's because she was mishandling it and not realizing what she was doing. All the warnings that we are aware of she is basically unaware of because... I don't know. It's still working for her and doesn't bother her. I don't plan on using another brand when I have to replace hers.

After 3 months the glue went bad on mine and started peeling on a top corner, then it went down both sides over night. Frankly at £40, it needs to last a lot longer for that money.

So;
It's mid August, 6½ months after the installation and it still looks great.
To be fair I have to mention that I do have two phones I use on a daily basis, but the Note is used for many more hours a week as a tablet as compared to my naked S8+, which I really only use to make and take calls.
In other words, the Note sees a lot of touch screen activity.
The Whitestone is holding up much better than I expected, given all the problems I've read about it. I do have a very subtle problem spot on the right side edge right in the middle where it has started to bubble. Though it's really only visible at certain angles, and quite small, my OCD magnifies this visual defect a great deal for me! When I hand over my phone to someone (always reluctantly...LOL) to view a picture or an app, I still get compliments on the screen protector, and no one has ever pointed it out to me. (It is very small.)
IT HAS DONE IT'S JOB...
-At least once, because there's a small scratch in the surface of the glass. Again, another thing hardly noticable, but if it were in the screen itself of my Note, I would be very upset. (Give me 6 more months to get to the point where it's perfectly acceptable for this handheld device to show signs of use.)
A CORNER DID START TO LIFT...
Last month, the upper right hand corner developed a very small bubble. I knew right away from what I've read that this might be the start of the end of this screen's life. But I continually massaged the screen down many times, and it actually worked and resealed.
My take on this is that firstly, it's been ridiculously hot in my region. That might've helped with resealing. But secondly and most importantly, I never allow dust to get near my phone.
Dust is the enemy. A single microfiber particle between the screen and glass cover might've made resealing impossible. People pop their phones in their pocket all the time, and because the phones are dust proof now, it's even easier to take for granted what they are exposed to. As soft and protective as pockets are, they expose phones to a lot of dust. (Look at the lint trap in a clothes dryer!)
IN CONCLUSION...
I'll keep monitoring this thread to answer any questions, but I'll probably only post an update of when the Whitestone finally needs to be replaced. At that point I'll probably throw some photos up before I remove the old one.
As far as I'm concerned it has already exceeded my expectations of longevity, and I'll gladly be getting a replacement when the time comes. But I will continue to try to get the most life out of this one despite the small lift on the edge.
BTW...
The "problem" side of my screen is where it had less of the LOCA bleeding out of the edge during installation. Even though the puddle of adhesive was dead center when I dropped the glass on, when I wiped the excess from the edges, the right side had less run-off. Right now I'm wondering if I wiped the excess off of the edges too soon. During the next installation, I'll be sure to give more time for the glue to stay where it needs to.
COMPARED TO NO SCREEN PROTECTOR...
Well, I never, ever, ever have used any of my smart phones without a screen protector. But I finally grew weary of the cheap crappy edge-adhesive glass protector I had on my S8+, and threw it out! The screen would often not register touches, etc, and was an under-screen dust catcher. I havn't bought a Whitestone for it yet because I spend so little time using it that I keep forgetting. So for about 4 months, I've been using my S8+ with no protection save a case that does have a screen flap (like a wallet).
I have a small rub mark on the screen, hardly noticable, but it's there.
If and when I purchase a Whitestone for that phone, I'll post here as to whether or not the LOCA actually hides that mark, as I've read in other threads that it can hide existing scratches presumably because it fills them in (makes sense).
A FINAL PLUG FOR THE NOTE 8...
I doubt the NOTE 10/X will wow me enough to drop my 8 like a wet sock and bolt to the store. I do figure that it'll be feature-packed since the advances of the 9 weren't anything crazy special. But I'm far from tired of this phone and given what I paid for it, I expect I'll have it long enough to have to perform the inevitable battery replacement surgery before I finally upgrade.
I believe the Whitestone protection will help me stay that course. :good: