Related
I just got the javoedge no-glare screen protector and it is the best I have used.
I think that the zagg invisiblesheild is amazing and bulletproof, but has a terrible glare. The one from javoedge makes this phone usable during the day outside.
http://www.javoedge.com/reflexeshop/productCatalog/getProduct.do?poid=985&pbmId=4737
Outside Use
If it was mid-day, brightest sun you can get directly over head...when I try to use my phone, I jack up the brightness to 100%.
Then I would usually have to cover it with my hand, and still get very little ability to see the screen.
I'm using, and have been for about 6 months:
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
It's like impossible to scratch and the screen is perfect.
The main problem is glare / daytime usability. I'm ready to buy the one you suggested almost ASAP just for that.
How many do you get, just the one, I still might have to try this out it sounds better than my walmart ones.Wow might have to try them both.
I used the zagg one you have and love it for durability (I had the whole phone protector and loved it until it got gunky around the edges). The issue was glare; I couldn't see anything with it on.
With this you get one screen protector, but it is all you need. With the regular phone with no screen protector I could see about 40%, zagg 30%, this one somewhere around 75% or better (a noticeable increase, not perfect, but much much improved).
The problem with the walmart ones (and most others) is that you don't have the durability that zagg and this one does; with this one you can abuse the screen and still wipe them off with your finger for a perfect view.
I recently purchased the JAVOScreen anti-glare screen protector and enjoy the durability and fitment. However, I find it very hard to use in daylight.
Are you sure you purchased the anti-glare one?
Martin Overlay
Expensive but the best screen protector I've ever used. I use them on all my mobile devices.
My .02
I have been using Pocket PC Techs WriteShields for a long time now all the way back to my Ipaq 3650 days... long before my i700.
They are anti-glare and so dang durable that it is one of those products you just love to recommend. I have been given some other brands here and there along the years and those REALLY cemented my appreciation for the WriteShields. I play a LOT OF SOLITAIRE... like every time I go to the reading room (if you get my drift) and I always my fingernails... along with all my other PDA/phone use. I get around two years out of one of these and that includes just a ridiculous amount of abuse.
I have the same thing on my Tablet PC... it has been there since 2004 and I kid u not... it looks like brand new (obviously not as abused as the phones )
FWIW
Veloslave......Would you please advise on your visibilty outside during the day.
Can't believe it's not mentioned here.
The best screen protector hands down for any device are the Anti Glare ones from www.Boxwave.com
they'll last forever, are washable, easy to apply, make the touch surface feel more paperlike which makes writing on it nicer, eliminates glare, doesn't show fingerprints... it's just awesome.
I have the on my Sony TG50, my Nintendo DS, and my xv6800. All are perfect.
Well, I have the Zagg invisibleSHIELD, and I like it, it just sucks in the sunlight. I'd like a better one for viewing outdoors, but after reading this post, I dont know what to get. Three to choose from...
Boxwave
Pocket PC Techs
JAVOedge
Choices... choices...
You won't be dissapointed with Boxwave antiglare, trust me. I got my TG50 5 years ago now, and it was a great choice then, still is.
Just ordered the anti-glare from boxwave. we'll see how I like it when it gets here.
veloslave said:
My .02
I have been using Pocket PC Techs WriteShields for a long time now all the way back to my Ipaq 3650 days... long before my i700.
They are anti-glare and so dang durable that it is one of those products you just love to recommend. I have been given some other brands here and there along the years and those REALLY cemented my appreciation for the WriteShields. I play a LOT OF SOLITAIRE... like every time I go to the reading room (if you get my drift) and I always my fingernails... along with all my other PDA/phone use. I get around two years out of one of these and that includes just a ridiculous amount of abuse.
I have the same thing on my Tablet PC... it has been there since 2004 and I kid u not... it looks like brand new (obviously not as abused as the phones )
FWIW
Click to expand...
Click to collapse
How is it in the sunlight?
meccadon123 said:
Veloslave......Would you please advise on your visibilty outside during the day.
Click to expand...
Click to collapse
+1
I would like to know as a few talk about this one. I use my phone outside and the sun and my screen don't mix with visibility.
Got the anti glare one from boxwave. It's got a lot of pros and not many cons.
Pros:
A dream to write on w/ the stylus.
Very easy to install, not one of those flimsy "rubbery" screen protectors, actually plastic and stiff.
Even if you do get a little dust under it, you cannot see it at all once it's installed.
No air bubbles whatsoever.
Very easy to wipe fingerprints off of.
They say it's removable and washable? I dunno about that, but if I ever have to do it, it's worth a shot I guess.
Cons:
Easier to read in the sunlight, but not near what the website hypes it up to be.
More pros than cons, overall I am very happy with it. I like it a lot better than the Zagg invisibleSHIELD.
-Randy
Glad you liked it. I know I do. They are definetly removeable, and washable, but they are a bit tricky to remove. You must do so very carefully or you can risk bending them, or worse, removiing some of the adhesive which will be noticeable when it's reapplied. I've found to remove them, get them warm first with like a hairdryer to make it easier to remove, and then try to lift a corner with somethign very thin like a razor blade. To wash just rub it with mild dishsoap and water, and then flick it off like a poloroid. You can reapply it evenn with some water still on it.
In my expirence, not much reason to ever remove it. Just clean it while it's still on there.
I'll second the Boxwave screen protectors. I've had the same one on my phone since I got the phone at launch. I've taken it off once to clean it, and I have one very small scratch on it. Pretty impressive compared to other protectors I've used.
I have been meaning to get a screen protector. I am leaning towards Boxwave but last time I had an anti-glare, it made the screen a tad fuzzy. Hmmm....
I'm using the Boxwave Anti-Glare as well. The only issue I ran into is that I had to trim mine just a slight amount for my Mogul, the stock size actually fit under the case edges of the screen and caused my screen to not respond to touch. It does a great job of resisting fingerprints, and the paper feel when writing is definately a plus.
I swear by the Zagg products. It is true they are not that great in the sunlight. I usually crank my brightness but I have used the WriteShields before and they scratch after continue use. Play solitaire for a while and you will see the drag line from the deck to the stacks. Kind of annoying. Zagg will not scratch at all, guaranteed. Check out the Zagg videos on wrapping an iPod and then using a weed wacker on it.
So I had my original Att screen protector on my tilt for over 3 months..then this week I went to the tmobile store and bought screen protectors cuz mine was old and wear and tear set in. Come to find out when I get home and unbox it...its the kind that's not alrdy fitted for the phone screen and you have to cut it out and size it yourself..theirs a reason why like 15 screen pro's come in the box...I nearly went through the whole box trying to use scissors and cutting and itting the stupid things myself...I shoulda went to ATT cuz I think their screen pro's come fitted for touchscreens. Anyway after finally fitting it to my tilts screen..I got another problem, Air f#*king bubbles!....anybody have this issue and figured out how to put on screen pro's without stupid air bubbles?
use a card (credit card, atm, license) and smooth it out little by little when applying
works perfectly for me
The screen protector that came with my Tilt isn't EXACTLY the same size of the screen. I managed to put it on as soon as I had it in my hand (still in-store before paying the guy). The bottom of the screen looks perfect, but at the top of the screen there is a gap of uncovered screen about the 1/16th of an inch. Doesn't bother me though...
The best thing you can do to avoid air bubbles is to buy a quality, reusable screen protector. I bought mine 9 months ago from DayDeal.com, and it still works great. Since it not that super thin plastic, it goes on without any air bubbles. Well worth the $15.
I have ordered the Invisible Shield from http://www.zagg.com/
Haven't got it yet, so I can't share any personal experience, but this was highly recommended on a norwegian PDA forum.
Wow, my screen protector is on it's 10th month and it looks as good as the day I put it on. And it's a $5 cheapy one from Pocket Solutions.
I have been using the JavoScreen Ultra Clear screen protectors for a few years no, and have been very happy. They are completely removable, washable, replaceable without leaving residue; and they do not trap bubbles. Once applied, you literally cannot tell that it's there! They are a few more dollars than some other similar brands, but they are IMHO the best.
I've just given up on them. The glass feels better without one.
squeeze the big ones out by just pushing them off to the side with your fingers. the smaller ones should go away after a few days use.
on a side note, my screen protector that came with the phone SHIFTED somehow, and i cant move it back (well i dont want to peel it off and restick it). odd.
tdusen said:
I've just given up on them. The glass feels better without one.
Click to expand...
Click to collapse
same here.
moegdaog said:
So I had my original Att screen protector on my tilt for over 3 months.. Come to find out when I get home and unbox it...its the kind that's not alrdy fitted for the phone screen and you have to cut it out and size it yourself..
Click to expand...
Click to collapse
You guys will probably think I'm nuts, but I swear by WriteShield product from PocketPCtechs. Expensive, but worth it. The plastic they use is superior, it's absolutely crystal clear, and it's cut perfectly to fit.
I've experimented with other cheaper products that didn't last or didn't fit right. I've tried the cut-them-yourself products (boxwave) and they didn't work out right for me either. I went right back to the WriteShield and no worries.
At one time, I thought to myself that spending so much on screen protectors was nuts, and what they charge for shipping added insult to injury, but then I put it into perspective. What's it worth to protect a $600 machine? What's it worth to not have to be without the machine while I have my screen serviced and what would the combined cost of the hardware labor and inconvenience be?
I've used them on every PDA I've owned and I'll never look back. I have yet to find a better product out there.
Link is here: CLICKY
Hi,
Someone can say me if WriteShield Screen Protector fit exactly the screen size of the Kaiser without leaving some screen surface unprotected ? Or which one fit exactly the screen's size ?
Thanks in advance
Moo
VTECaddict said:
squeeze the big ones out by just pushing them off to the side with your fingers. the smaller ones should go away after a few days use.
Click to expand...
Click to collapse
This
Plus, don't use a card to squeeze out the large bubbles -- I did this once and ended up with scratch marks. Just use your fingers, and the small ones should vanish with time.
First off, hi guys - new HD2 (Leo) owner here and have to say I love it!!
Anyway, thought I'd just say something about this product. It's rubbish...
Poor fit, didn't stick properly and bubbles galore - stay well clear of it IMO
Anyway, will be lingering about as still getting my head about WinMo and the various ROMs about - still running stock 1.48 ROM out the box but it's an awesome phone and definitely glad I got it...
Well my friend, for a first post it's a good point well made. The HTC screen protectors are ****e! I managed to lay mine without bubbles, but at the bottom where it fits over the buttons it keeps lifting up and just doesn't settle properly. It's now starting to get crap underneath it, completely defeating it's intended purpose.
Final verdict... EPIC FAIL!
Oh and Welcome to XDA Developers EddyOS. I'm sure you'll be a flashaholic in no time.
ClownShoes said:
Well my friend, for a first post it's a good point well made. The HTC screen protectors are ****e! I managed to lay mine without bubbles, but at the bottom where it fits over the buttons it keeps lifting up and just doesn't settle properly. It's now starting to get crap underneath it, completely defeating it's intended purpose.
Final verdict... EPIC FAIL!
Oh and Welcome to XDA Developers EddyOS. I'm sure you'll be a flashaholic in no time.
Click to expand...
Click to collapse
Did yours come with a screen protector in the box? I didn't see one in mine but I may have overlooked it, or different packaging in Asia. So tomorrow I'm on a hunt to find one.
I dont recal there being one in mine either. Hmm maybe i should look alittle harder.
Maybe they ordered the original OEM ones from HTC as a side-order!?
I did, and mine are in the mail.
Should arrive tomorrow...
Hope they are not as bad as stated in this post...
Will be sure to comment on it here when I get them
Yeah, bought mine from the HTC Shop - didn't get any in the box...
Ordered mine too... complete waste of money
I got the official ones too, I thought it was me just fitting it badly as it didn't seem to fit the screen and had bubbles. I couldn't get it to sick below the buttons either. It had to come off. I got another one from Amazon and it now fits as I would expect it to.
I would not recommend the official protector from HTC, sorry.
What ones did you get in the end? Might be tempted to get one to be on the safe side but my phone does stay in it's pouch when not in use...
Why would you need to have a screen protector......
If you guys have been hiding under your bed sheets then its time to wake up.
Leo, AKA HD2 had a scratch resistant glass and not a cheap plastic face.
Just have a look at the following link and you will agree....
http://www.youtube.com/watch?v=NcEaehKWr2s
you need guts to do it, but i didnt have the guts to do that.
But atleast the screen protector is not needed.
Of course a screen protector is needed. It may be made of glass, but it's not bullet proof glass!
EddyOS said:
What ones did you get in the end? Might be tempted to get one to be on the safe side but my phone does stay in it's pouch when not in use...
Click to expand...
Click to collapse
http://www.amazon.co.uk/exec/obidos/ASIN/B002Y33M4W/ref=ox_ya_oh_product
This is the one I went for from Amazon. Fits much better than the official HTC one as it sits just slightly within the screen profile rather than exactly the same size. I have a 100% fix now.
But as one of the posts above points out, we shouldn't really need a protector on it because it is scratch resistant, but I go for peace of mind.
GUYS!
Please stay away from HTC screen protector. It is the worst screen protector I have ever had. First of all it is almost impossible to apply correctly, I had 4 and scrapped every single one! (just to say it is not the first device with big screen I tried to apply screen protector and I never had troubles before). Second thing is that it gets very smudgy.... for me complete waste of money.
petexx said:
GUYS!
Please stay away from HTC screen protector. It is the worst screen protector I have ever had. First of all it is almost impossible to apply correctly, I had 4 and scrapped every single one! (just to say it is not the first device with big screen I tried to apply screen protector and I never had troubles before). Second thing is that it gets very smudgy.... for me complete waste of money.
Click to expand...
Click to collapse
Completely aggree with you. I also waste 3 of them. finally a give up!
Not recomended!
My HTC screen-protectors arrived today...
And I have to admit, I didn't really believe the people writing about how bad they were.
But I have to aggree, what a piece of s***!
I got 2 in the pack, and the first one messed up on a biblical level for me.
The second one actually seemed to fit as intended, but I just couldn't get the corner to fit right...
I got away with no bubbles underneath, but the damn corner just couldn't fit.
We're talking a matter of milimeters here...
Stay away from them, like everyone else is saying
I'll join the chorus.
I ordered a pack of 2, and quickly noticed that they're very different from the (actually quite OK) HTC HD protectors.
The adhesive side seems to attract small particles from the air within seconds. Just one such small particle produces an ugly bubble. I don't want to be seen with such bubbles. My wife would call be "Bubble Boy".
Since the adhesive is quite strong, it's impossible to make minute adjustments the moment a part of the protector touches the glass. This is compounded by the exact measurements - even when I thought it fit wonderfully on one end of the screen, the other end collided with the screen bezel, making it a bust.
The protector is also very thin and flexible, so it is almost impossible to hold without bending and getting fingerprints underneath, further ruining its appearance.
This product should be retracted from the market. I completely understand why the HD2 doesn't come bundled with these protectors:
1. they're practically impossible to fit
2. the HD2's glass doesn't really need it
I'll live hard and fast, without protection.
What for?
My HD2 is rocking along very nicely without a screen protector... with this scratch resistant glass, I really didn't see the point.
I avoid putting my phone in the same pocket as my loose change or my keys - but that was a pretty easy adjustment to make.
... Just don't see what I'd want to use a screen protector for other than to take a beautifully slim piece of art look like something it's not.
skippinshanghai said:
My HD2 is rocking along very nicely without a screen protector... with this scratch resistant glass, I really didn't see the point.
I avoid putting my phone in the same pocket as my loose change or my keys - but that was a pretty easy adjustment to make.
... Just don't see what I'd want to use a screen protector for other than to take a beautifully slim piece of art look like something it's not.
Click to expand...
Click to collapse
I don't see how applying a screen protector that's probably less than 0.5mm thick will ruin the look of the device.
Its about personal choice
Screen protector or no screen protector? Condom or no condom? Safety glasses or no safety glasses? Its a matter of choice linked to a a personal assessment of risk, cost and benefit.
I always use one........
WB
fz9999 said:
Of course a screen protector is needed.
Click to expand...
Click to collapse
It's not "needed". It's scratch resistant glass - we have discussed this here before. It's the same type of glass you get with better watches. Do you use them with a protector? If you "want" damage the glass you can do this with force, but then a screen protector wouldn't help neither.
Everyone go to zagg.com/theshack.
This is supposed to be expired but its still spitting out codes. Use any bogus employee code ( really put anything in), then just use an email that hasent been used yet. I've tested it out already so it works. Just use the code quick
frostrunner said:
Everyone go to zagg.com/theshack.
This is supposed to be expired but its still spitting out codes. Use any bogus employee code ( really put anything in), then just use an email that hasent been used yet. I've tested it out already so it works. Just use the code quick
Click to expand...
Click to collapse
Hey thanks! I just ordered the full body kit, came out to 9 bucks after shipping
are they any good?
i dint work on the custom invisible shields covers and other stuff i wanted to try ..neither the battery thing ...
So many people say its a PAIN IN THE ASS to get them on.
Well I will take mine to the mall where they have a kiosk for invisible shields they will put em on for ya for free and if they f up or you don't like the way they do it, they'll give. You a new one for free
I have always used bodyguardz.com. They cover the entire phone, and easy to put on. 2 full body sets 24 bones. Custom cut for each phone, and work great.
Heh, I've had a zagg full body for my Hero for probably about like 2 weeks probably longer. Its still sitting on my kitchen counter...
@jvz -
Sure, it's a PITA to get them on, but the alternatives aren't exactly much easier. Each brand is slightly different, but overall results are comperable.
ZAGG -- Most recent purchase (month ago) included a 'sponge' as a fluid applicator, plenty of fluid in the 'cup' that held it, and was a nearly perfect fit for the screen area on my Sprint Hero. Yes, the InvisibleShield feels a bit 'tacky' after first application, moreso than Bodyguardz, but most of the excess friction (and any remaining cloudiness under the cover -- minimal) seems to go away after a few days. Overall, ZAGG does exactly what it claims. Caveat: if you get particles between the screen and the cover during application, either live with them, or get a new cover and start over -- if you try to 'lift' it and re-apply you will end up making things worse. Apply it well the first time, and you are good to go.
Bodyguardz -- Most recent purchase (6 months ago) included a 'pump-spray bottle' as a fluid applicator, and perhaps not quite enough fluid for applying a full body set, although the bottle could be refilled from the tap a few times. (most applicator fluids are nothing more than water with a drop or so of a lubricant like baby shampoo). The screen piece fit my old Touch Pro just fine, but the body pieces were in many cases a few millimeters too long or too short, depending -- not perfect coverage. The pieces are easier to 'slide around' during application than say, the ZAGG shield, but you will still risk trapping particles if you feel the need to 'lift' and start again. Apply it right the first time -- no matter that brand. Overall, the 'feel' of the Bodyguardz was excellent beginning on day one -- visibility was initially marred by cloudiness that went away within a few days. The body pieces began to pickup dirt and peel within a few weeks, although the screen and button pieces stayed admirably affixed until removal.
ZAGG vs Bodyguardz -- No winner. Different, but similar, including performance under various lighting conditions. ZAGG might be slightly harder to install, but not by much. Bodyguardz might feel 'smoother' on day one, and ZAGG might look 'clearer' on day one, but by a week in they are practically indistinguishable to anyone who isn't used to the subtle differences.
/2cents
I personally use wrapsol. I tried both invisible shield and wrapsol. Invisible shield is a solid product but after a few months, it starts to turn yellow and it starts to feel rubbery. Application is a pain in the ass to install for invisible shield but rather easy on wrapsol. They stop selling the front screen protector for wrapsol, all they sell now is the full body protection kit.
Just my two cents
Regardless how well they work, you won't find anything like this for 6.25 (plus shipping and handling)
I just ordered 3 and it was 24 dollars and some change.
Thank you for this post!
great find, wanted to get one before just didnt want to pay full price,
I too ordered one !!
I just hope they will ship to india without any problems
I ordered 2, 15.49. Can't beat it.
thanks for this!
better yet guys -- you can get it for FREE!
zagg.com/blueshirt/index.php
The form only verifies that it has @bestbuy.com in it. So if you know how to wrangle DNS/email you can setup something like this:
[email protected]
and you'll get the coupon for a FREE one
wish i would of seen this last week when i bought my hero. oh well i only paid $22 for it at bestbuy.
I ordered two and they got here for $15.
I just opened the packages and am having a hard time with it. I haven't even started trying to apply them, I am just trying to decide if I even want to.
They feel really grippy. The whole point of the touch screen is that it is smooth as silk so your fingers slide across it easy. With this zagg stuff, I am not sure that they will.
Also, I have the sprint hero. It has that sort of charcoal brown finish on the back. It is really smooth and nice feeling. It is actually my favorite thing about the phone.
After applying this zagg stuff, the phone will now be glossy and not smooth anymore. There is no way around it. I was hoping these films might show up and when they harden, feel as hard and slick as glass. Instead, I am faced with the choice of taking away the properties of my phone that I am in love with, for the advantage of keeping it scratch resistant (two month and no scratches anyway...)
What do you guys think? Anyone feel the same way I do?
flexgrip said:
I ordered two and they got here for $15.
I just opened the packages and am having a hard time with it. I haven't even started trying to apply them, I am just trying to decide if I even want to.
They feel really grippy. The whole point of the touch screen is that it is smooth as silk so your fingers slide across it easy. With this zagg stuff, I am not sure that they will.
Also, I have the sprint hero. It has that sort of charcoal brown finish on the back. It is really smooth and nice feeling. It is actually my favorite thing about the phone.
After applying this zagg stuff, the phone will now be glossy and not smooth anymore. There is no way around it. I was hoping these films might show up and when they harden, feel as hard and slick as glass. Instead, I am faced with the choice of taking away the properties of my phone that I am in love with, for the advantage of keeping it scratch resistant (two month and no scratches anyway...)
What do you guys think? Anyone feel the same way I do?
Click to expand...
Click to collapse
i never buy the full body skins. i only buy the screen one, that's all you need. just be careful how wet the phone gets when applying, i killed a brand new palm pre once.
anyways it will feel a bit sticky for awhile, like a day. after that you won't notice a big difference in touch and feel. i do know when i first put mine on my hero, the screen acted funny for about an hour until it sorta dried, like the touch wasn't responsive. it's perfectly fine now.
Thank you thank you thank you. The website says 75% off a single item, so I didn't even bother trying to add more. Damn, paid extra $3 for another shipment. Still, I saved $37 off retail, so still not a bad deal at all. Have used these and recommend them all around; they do have a kinda weird texture, yeah, but they're almost bullet-proof.
just finished installing my new invisible shield on my HD2. during the process of installing the it, phone did seem to get a bit wet so im going to follow the advice to let it dry out for out 12 to 24 hours before turning it back on. the process of applying the shield is different compared to ones i have bought before. now a small package with a sponge is included and instead of a squeegee a installation card is used which i feel works much better to take out the small bubbles after. the shield fits just right covering the screen and a little extra beyond that. if anything i will update once i have let it dry out a bit and report back on how the screen reacts to the shield being on it and the screen sensitivity to touch.
What version did you buy? I have the Maximum Protection coming in the mail. I am just wondering what the difference between Full body and Maximum Protection is.
Not so good
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
I wanted to ask .. does the full Invisible shield of the HD2 ( screen and the back ) better or the just back only ??
I mean does the Invisible shield of the screen will reduce the sensitive of the touch on the screen ??
please because I want to buy it so which one I buy
just back or the both ??
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
I just bought one on ebay
Look at item, 180488642102 (can't post links since I rarely reply on the forum)
Installation was a breeze and much quicker than a zagg and in my opinion a cleaner look. My buddy wanted one, but didn't want to use their screen protector, so I asked if they would just sell the pieces for the housing. They said yes and all you have to do is buy the screen protector, item 170466295030 and put in the order notes that you want the housing pieces only. I would send them a note first.
This should save some $$$ and you could get the housing protector for around $6.
forelli said:
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
Click to expand...
Click to collapse
I believe that is why they have the New Maximum Protection for the T-mobile HD2. I cant confirm until I receive the one I purchased either Monday or Tuesday. According to the description I thought it said that the maximum protection is supposed to cover virtually everything you would wanna protect and is able to be stretched to cover the extra parts.
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
spoogedemon said:
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
Click to expand...
Click to collapse
thank you
so you advise me to buy it better than the normal Protector like in amazon (Premium Crystal Clear LCD Screen Protector for HTC HD2 ) and it is 5 Pack and 5$ ... but the Invisible shield HD2 24$
Go to zagg.com and see the difference between the two.. The invisibleshield material is stuff that they use on helicopter blades. You cannot scratch it... The cheap stuff on ebay will easily be scuffed and eventually tear..
I've seen some reviews on Zagg's stuff and the screen protector is usually too thick and 'grips' your finger as you try to slide on the screen. Don't know if that's still the case but I went with Bodyguardz again since it was decent on my TP2.
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
dtfast1 said:
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
Click to expand...
Click to collapse
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Pic
Is there somebody who can upload a picture of his HD2 with an Invisible shield on it? Especially the corners.
The HD2 screen is already quite scratch resistant, yes?
well been using the invisble shield on my hd2 for the past day or so and i must say, im not sure if its because of the way i applied it or because it just simply made this way but iv have enjoyed having it on. i dont see absoulutly any hazyness as mentioned before, on my screen. the screen still work great just barely have to touch the screen for it to register my touch. yes u can feel the shield on but, depending on wether u have ur fingers clean or dirty does it make a diffrence when ur using it and how it feels when sliding ur fingers on the screen. also i have noticed i clean the screen less often from dirt and the oil from ur hands, so u get to see less finger smudges on the screen to. also ever since i have the protection on i handle the phone a little more loosely and freely when pulling it out of my pocket. one more thing. for those who have a tmobile hd2 which i do. if u have noticed when u look at the screen mostly during the day in sunlight u can see just barely small dots and lines arranged all over the screen. i can tell they were made to be on the screen because there arranged in a specific order kinda like to register commands and i have noticed that i can just barely see them now with the shield on. makes the screen a lil clearer. i would highly recommended it. this isnt my first device i have applyed the shield on but it certanitly is the device i have been most satisfied with it being on because of its look feel and protection. hope this helps u guys decided on wether to get it or not. also as a last note i only have the screen cover on so i cant comment on the full protection or apparently the new "maximum coverage" shield
kcab87 said:
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Click to expand...
Click to collapse
I ordered my Maximum Protection on Wednesday and I am hoping to get it on Monday or Tuesday (and I paid for 2 day Air), I am going to most likely only apply the body pieces and not use the screen protection itself since the glass is really durable if you look at this http://www.youtube.com/watch?v=NcEaehKWr2s and I love the sensitivity of my screen and I know on my Mom's Pre and now her Droid eris as well as my brothers Droid eris, the screen is far from as sensitive once you apply the invisible shield. I will however stick with the product because I love there protection and how it gives you a tacky feeling that make me feel allot more secure with my phone in hand. I will also be taking some pictures and possible a quick video of the Invisible Shield on my device after it is applied (I am still debating if I want to pay Best Buy $7 to apply it for me lol)
This shield is perfect!
Hi,
My husband and I use the invisible shield from ZAGG. And not the full body, because it isn't really full. We have to protect and to see from the outside whos device it is. Skins from ZAGG... this is great. Easy to stick it on and it stays perfectly on. No sticky edges or something. I post some photos in this reply. The skins from ZAGG are perfect...
And we can separate the devices and won't take the wrong device to our work. (at 7.00a.m.)
The invisibleSHIELD is easy installed, but you need a lot of patience and a soft piece of fabric (don't know the right word! Doekje in dutch )
And keep your fingers wet! (oops! 1 picture of our cats!!! ) The pictures are made by the HTC HD2 (european version)
alvinmathew88 said:
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
Click to expand...
Click to collapse
+1 for phantomskinz...I have been using them for awhile on all of my phones.
I have tried zagg and BSE as well and I think the phantomskinz have the least amount of "orange peel" effect and I have noticed zero reduced sensitivity from having it on there.
If you check around on sites like www.retailmenot.com...you can usually find some good coupon codes to save even more money.
...still trying to figure out why they give you two complete sets...not that im complaining, but I upgrade so often...I have never used the 2nd skin for any of the phones I have
On the package, they recommend dipping the skin in a bowl of warm soapy water to apply...I have always had better results using a small spray bottle with the warm soapy water to spray the skin, and using a small bowl to just dip my fingers in.
As an application tip...I have learned that applying them in the bathroom after someone has taken a shower dramatically reduced the chance of airborn dust settling on the phone while you are applying them...just remember to use warm soapy water, keep your fingers nice and wet, lots of clean paper towels or a lint free cloth, and a spare phone to use while drying.
Also...the edges that you have to fold over can be tricky to get down if the skin is still wet. After you get the large flat areas secured down...use a hair dryer and blow dry the adhesive side of the skin to dry it out a bit. the heat also makes the skin much more flexable and easier to shape to the contours of the phone.
Cheers
I have used the 'full-body' protection Invisible Shield, and must say that I am not very pleased with it. The salesperson asked for about 40% of the price to help me apply it. And I figured I could do a job as well as some aunty, and so I did !
And found myself looking at Not-So-Invisible-Shield. There're 3 specks of dust that wouldn't come out even after I unpeeled it and used the sponge provided to scrub it. ANYWAY, the IS doesn't seem to change the sensitivity of the screen much, but it certainly does increase the friction, so swpye-ing might feel a little odd. But I am overall pleased with the product and protection.