just finished installing my new invisible shield on my HD2. during the process of installing the it, phone did seem to get a bit wet so im going to follow the advice to let it dry out for out 12 to 24 hours before turning it back on. the process of applying the shield is different compared to ones i have bought before. now a small package with a sponge is included and instead of a squeegee a installation card is used which i feel works much better to take out the small bubbles after. the shield fits just right covering the screen and a little extra beyond that. if anything i will update once i have let it dry out a bit and report back on how the screen reacts to the shield being on it and the screen sensitivity to touch.
What version did you buy? I have the Maximum Protection coming in the mail. I am just wondering what the difference between Full body and Maximum Protection is.
Not so good
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
I wanted to ask .. does the full Invisible shield of the HD2 ( screen and the back ) better or the just back only ??
I mean does the Invisible shield of the screen will reduce the sensitive of the touch on the screen ??
please because I want to buy it so which one I buy
just back or the both ??
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
I just bought one on ebay
Look at item, 180488642102 (can't post links since I rarely reply on the forum)
Installation was a breeze and much quicker than a zagg and in my opinion a cleaner look. My buddy wanted one, but didn't want to use their screen protector, so I asked if they would just sell the pieces for the housing. They said yes and all you have to do is buy the screen protector, item 170466295030 and put in the order notes that you want the housing pieces only. I would send them a note first.
This should save some $$$ and you could get the housing protector for around $6.
forelli said:
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
Click to expand...
Click to collapse
I believe that is why they have the New Maximum Protection for the T-mobile HD2. I cant confirm until I receive the one I purchased either Monday or Tuesday. According to the description I thought it said that the maximum protection is supposed to cover virtually everything you would wanna protect and is able to be stretched to cover the extra parts.
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
spoogedemon said:
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
Click to expand...
Click to collapse
thank you
so you advise me to buy it better than the normal Protector like in amazon (Premium Crystal Clear LCD Screen Protector for HTC HD2 ) and it is 5 Pack and 5$ ... but the Invisible shield HD2 24$
Go to zagg.com and see the difference between the two.. The invisibleshield material is stuff that they use on helicopter blades. You cannot scratch it... The cheap stuff on ebay will easily be scuffed and eventually tear..
I've seen some reviews on Zagg's stuff and the screen protector is usually too thick and 'grips' your finger as you try to slide on the screen. Don't know if that's still the case but I went with Bodyguardz again since it was decent on my TP2.
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
dtfast1 said:
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
Click to expand...
Click to collapse
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Pic
Is there somebody who can upload a picture of his HD2 with an Invisible shield on it? Especially the corners.
The HD2 screen is already quite scratch resistant, yes?
well been using the invisble shield on my hd2 for the past day or so and i must say, im not sure if its because of the way i applied it or because it just simply made this way but iv have enjoyed having it on. i dont see absoulutly any hazyness as mentioned before, on my screen. the screen still work great just barely have to touch the screen for it to register my touch. yes u can feel the shield on but, depending on wether u have ur fingers clean or dirty does it make a diffrence when ur using it and how it feels when sliding ur fingers on the screen. also i have noticed i clean the screen less often from dirt and the oil from ur hands, so u get to see less finger smudges on the screen to. also ever since i have the protection on i handle the phone a little more loosely and freely when pulling it out of my pocket. one more thing. for those who have a tmobile hd2 which i do. if u have noticed when u look at the screen mostly during the day in sunlight u can see just barely small dots and lines arranged all over the screen. i can tell they were made to be on the screen because there arranged in a specific order kinda like to register commands and i have noticed that i can just barely see them now with the shield on. makes the screen a lil clearer. i would highly recommended it. this isnt my first device i have applyed the shield on but it certanitly is the device i have been most satisfied with it being on because of its look feel and protection. hope this helps u guys decided on wether to get it or not. also as a last note i only have the screen cover on so i cant comment on the full protection or apparently the new "maximum coverage" shield
kcab87 said:
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Click to expand...
Click to collapse
I ordered my Maximum Protection on Wednesday and I am hoping to get it on Monday or Tuesday (and I paid for 2 day Air), I am going to most likely only apply the body pieces and not use the screen protection itself since the glass is really durable if you look at this http://www.youtube.com/watch?v=NcEaehKWr2s and I love the sensitivity of my screen and I know on my Mom's Pre and now her Droid eris as well as my brothers Droid eris, the screen is far from as sensitive once you apply the invisible shield. I will however stick with the product because I love there protection and how it gives you a tacky feeling that make me feel allot more secure with my phone in hand. I will also be taking some pictures and possible a quick video of the Invisible Shield on my device after it is applied (I am still debating if I want to pay Best Buy $7 to apply it for me lol)
This shield is perfect!
Hi,
My husband and I use the invisible shield from ZAGG. And not the full body, because it isn't really full. We have to protect and to see from the outside whos device it is. Skins from ZAGG... this is great. Easy to stick it on and it stays perfectly on. No sticky edges or something. I post some photos in this reply. The skins from ZAGG are perfect...
And we can separate the devices and won't take the wrong device to our work. (at 7.00a.m.)
The invisibleSHIELD is easy installed, but you need a lot of patience and a soft piece of fabric (don't know the right word! Doekje in dutch )
And keep your fingers wet! (oops! 1 picture of our cats!!! ) The pictures are made by the HTC HD2 (european version)
alvinmathew88 said:
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
Click to expand...
Click to collapse
+1 for phantomskinz...I have been using them for awhile on all of my phones.
I have tried zagg and BSE as well and I think the phantomskinz have the least amount of "orange peel" effect and I have noticed zero reduced sensitivity from having it on there.
If you check around on sites like www.retailmenot.com...you can usually find some good coupon codes to save even more money.
...still trying to figure out why they give you two complete sets...not that im complaining, but I upgrade so often...I have never used the 2nd skin for any of the phones I have
On the package, they recommend dipping the skin in a bowl of warm soapy water to apply...I have always had better results using a small spray bottle with the warm soapy water to spray the skin, and using a small bowl to just dip my fingers in.
As an application tip...I have learned that applying them in the bathroom after someone has taken a shower dramatically reduced the chance of airborn dust settling on the phone while you are applying them...just remember to use warm soapy water, keep your fingers nice and wet, lots of clean paper towels or a lint free cloth, and a spare phone to use while drying.
Also...the edges that you have to fold over can be tricky to get down if the skin is still wet. After you get the large flat areas secured down...use a hair dryer and blow dry the adhesive side of the skin to dry it out a bit. the heat also makes the skin much more flexable and easier to shape to the contours of the phone.
Cheers
I have used the 'full-body' protection Invisible Shield, and must say that I am not very pleased with it. The salesperson asked for about 40% of the price to help me apply it. And I figured I could do a job as well as some aunty, and so I did !
And found myself looking at Not-So-Invisible-Shield. There're 3 specks of dust that wouldn't come out even after I unpeeled it and used the sponge provided to scrub it. ANYWAY, the IS doesn't seem to change the sensitivity of the screen much, but it certainly does increase the friction, so swpye-ing might feel a little odd. But I am overall pleased with the product and protection.
Related
What do you guys use / recommend for screen protectors and cleaners?
I use the protectors from ShieldZone. Nothing comes close.
I bought mine through a deal I found on Slickdeals (it's about to expire!)
Check here for info: http://forums.slickdeals.net/showthread.php?sduid=184771&t=712921&highlight=shield
My favorites are the "crystal clear" type from ppcTechs:
http://www.pocketpctechs.com/main~u...0~area~accessories-WriteSHIELD%AE+crystal.htm
have you tried the front and side protector from shieldzone?
j3oomerang said:
have you tried the front and side protector from shieldzone?
Click to expand...
Click to collapse
i too would be interested in what you use, i.e. just the screen protector or the front and side protectors.
If you have used the front and side protectors could you describe what the coverage is like?
and i have heard that that brand makes it hard to use the stylis, have you had that experience as well?
hmm might have to post pictures of this one...
ordered today 2/2/08 with 50% off via slickdeals. I got them for my mogul and my Panasonic Toughbook cf-19. [bad ass they had one for it.] Cant wait to see if this product stands up to it's advertised quality.
goalkeepr said:
I use the protectors from ShieldZone. Nothing comes close.
I bought mine through a deal I found on Slickdeals (it's about to expire!)
Check here for info: http://forums.slickdeals.net/showthread.php?sduid=184771&t=712921&highlight=shield
Click to expand...
Click to collapse
Are those shield zone one's like clearview? are they hard to the touch like screen material itself? i dont like the ones that are soft and sort of compress when you hit with the stylus
morganlowe said:
hmm might have to post pictures of this one...
ordered today 2/2/08 with 50% off via slickdeals. I got them for my mogul and my Panasonic Toughbook cf-19. [bad ass they had one for it.] Cant wait to see if this product stands up to it's advertised quality.
Click to expand...
Click to collapse
so did you get just the screen protectors or the front and side covers as well? I would love to see close ups of the front and side protector. cant seem to find any info or pics of them anywhere.
i got just the screen protector... it is nice, but tricky to get on at first. i don't really notice it when using the stylus. in some light i see a orange peal like affect. since it took me about three tries to get it in position and all the air bubles out there it isn't perfectly clean on the unexposed side. but it works.
Just order it at brando. To my opinion the best there are. Ultra clear is the one I like the most.
Link
Search for exim spuc or exim spoc on ebay. They're hard screen protectors that are residue free, and almost scratch-proof, stylus and pocket-wise thinking. (I don't think its as scratch proof as the invisible shield protectors, but isn't soft like a cushioning effect as with invisible shield) They also block out UV rays, making it easier on the eyes in direct sunlight. I've been using it ever since the first of my phone days (Sony Ericsson S700i, Nokia E60i, Nokia E61i, AT&T Tilt, HTC Tytn II, 2x Moguls)
One tip is to put it on in a dust free room...if dust gets on the application side of the protector, use some scotch tape to remove it. Works wonders.
tcolling said:
My favorites are the "crystal clear" type from ppcTechs:
http://www.pocketpctechs.com/main~u...0~area~accessories-WriteSHIELD%AE+crystal.htm
Click to expand...
Click to collapse
How is the anti-glare in the sun? I am curious as I am looking for a new one.
Debating the clear vs anti-glare as I use my phone a good bit outside...
Any updates on any other screen protectors?
JavoScreen claims to be quite effective.
Here's a recent video shootout of leading screen protectors.
I don't recall which brand of antiglare screen I use; it was one of the most expensive ones, and comes with a camel's hair brush. In any event, it does the job EXCEPT in bright sunlight, when it's helpless. I'm thinking that a slip-on polarizer would be welcomed for bright sun.
best ive used
i think this is the same one i last bought, and its the best yet.
http://cgi.ebay.com/H009-3-Screen-P...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
i have tried many, and this one is the best.
no bubbles, perfect fit, and dosnt screw up the screen when removed. i attached a scan of the packaging mine came in below
tought id chime in..
i have had the oem crappy flimsy one for a while now..
was going to buy 3 from ebay for $7 free shipping..
kept on forgetting to go and buy them.. so I walked into verizon... no sprint stores on my walk through philly.... and bought the blackberry universal kit... $10.66 with tax... tell you what.. they are nice and thick....
you can hold it at the corner and it will not bend!!!!
also has a grid for you to cut...
went on super easy.. 0 bubbles... none... and im loving it...
verizon sku UNIV3PKSP
So I had my original Att screen protector on my tilt for over 3 months..then this week I went to the tmobile store and bought screen protectors cuz mine was old and wear and tear set in. Come to find out when I get home and unbox it...its the kind that's not alrdy fitted for the phone screen and you have to cut it out and size it yourself..theirs a reason why like 15 screen pro's come in the box...I nearly went through the whole box trying to use scissors and cutting and itting the stupid things myself...I shoulda went to ATT cuz I think their screen pro's come fitted for touchscreens. Anyway after finally fitting it to my tilts screen..I got another problem, Air f#*king bubbles!....anybody have this issue and figured out how to put on screen pro's without stupid air bubbles?
use a card (credit card, atm, license) and smooth it out little by little when applying
works perfectly for me
The screen protector that came with my Tilt isn't EXACTLY the same size of the screen. I managed to put it on as soon as I had it in my hand (still in-store before paying the guy). The bottom of the screen looks perfect, but at the top of the screen there is a gap of uncovered screen about the 1/16th of an inch. Doesn't bother me though...
The best thing you can do to avoid air bubbles is to buy a quality, reusable screen protector. I bought mine 9 months ago from DayDeal.com, and it still works great. Since it not that super thin plastic, it goes on without any air bubbles. Well worth the $15.
I have ordered the Invisible Shield from http://www.zagg.com/
Haven't got it yet, so I can't share any personal experience, but this was highly recommended on a norwegian PDA forum.
Wow, my screen protector is on it's 10th month and it looks as good as the day I put it on. And it's a $5 cheapy one from Pocket Solutions.
I have been using the JavoScreen Ultra Clear screen protectors for a few years no, and have been very happy. They are completely removable, washable, replaceable without leaving residue; and they do not trap bubbles. Once applied, you literally cannot tell that it's there! They are a few more dollars than some other similar brands, but they are IMHO the best.
I've just given up on them. The glass feels better without one.
squeeze the big ones out by just pushing them off to the side with your fingers. the smaller ones should go away after a few days use.
on a side note, my screen protector that came with the phone SHIFTED somehow, and i cant move it back (well i dont want to peel it off and restick it). odd.
tdusen said:
I've just given up on them. The glass feels better without one.
Click to expand...
Click to collapse
same here.
moegdaog said:
So I had my original Att screen protector on my tilt for over 3 months.. Come to find out when I get home and unbox it...its the kind that's not alrdy fitted for the phone screen and you have to cut it out and size it yourself..
Click to expand...
Click to collapse
You guys will probably think I'm nuts, but I swear by WriteShield product from PocketPCtechs. Expensive, but worth it. The plastic they use is superior, it's absolutely crystal clear, and it's cut perfectly to fit.
I've experimented with other cheaper products that didn't last or didn't fit right. I've tried the cut-them-yourself products (boxwave) and they didn't work out right for me either. I went right back to the WriteShield and no worries.
At one time, I thought to myself that spending so much on screen protectors was nuts, and what they charge for shipping added insult to injury, but then I put it into perspective. What's it worth to protect a $600 machine? What's it worth to not have to be without the machine while I have my screen serviced and what would the combined cost of the hardware labor and inconvenience be?
I've used them on every PDA I've owned and I'll never look back. I have yet to find a better product out there.
Link is here: CLICKY
Hi,
Someone can say me if WriteShield Screen Protector fit exactly the screen size of the Kaiser without leaving some screen surface unprotected ? Or which one fit exactly the screen's size ?
Thanks in advance
Moo
VTECaddict said:
squeeze the big ones out by just pushing them off to the side with your fingers. the smaller ones should go away after a few days use.
Click to expand...
Click to collapse
This
Plus, don't use a card to squeeze out the large bubbles -- I did this once and ended up with scratch marks. Just use your fingers, and the small ones should vanish with time.
invisibleSHIELD - Look it up for the Diamond my mate got it and it hardly shows any finger prints even after a days use and smudges whilst retaining the sheen of the device, also your back and front will be fully protected whilst keeping its form factor... if you have microscopic scratches like mine on screen that are obvious in well light conditions they will also disappear after application- ordered mine already...
Review and good pics... http://joeygadget.com/2007/08/15/on...-shield-screen-protector-for-iphone-and-treo/
They are available on ebay in most countries for Diamond - make sure you get the legit one as I am sure there are **** counterfits...
The ones for the iPhone are very hard to install and keep all of the little bubbles out, have plenty of patience when installing.
Although it is tough, the appearance after installation is extremely ugly.
Esp the screen.( no more grossy). I finally uninstalled it ( my wife said that my diamond is very ugly after the invisible shield, looks like an old PPC) and use other anti scratch screen protector and silicon case for body protection.
I have invisible shield for both 3g iphone and touch diamond...installation was easy actually but it doesnt look nice....u can tell theres something on the screen.
Would not recommend
I've already ordered one but couldn't installed it properly. It was very very hard and although I tried to be very carefully, still a lot of bubbles remained under the iShield. I put it off again and now I've got no screen protector anymore. Instead I use the original pocket case to wear the Diamond in my pocket. I think my fingers won't be able to scratch the display when touching it
Thanks for all the feedback
Interesting after install my friends one looked alright to me... hmmm I will post some pics after install and post my findings...
Anyone have a positive experience?
My friend's iPhone 3G looks MINT with it, literally can't tell it's there... But it was a ***** to install, especially around the corners.
I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.
shinobi_uk said:
I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.
Click to expand...
Click to collapse
Might make it look plastic, but I really can't say since my friend's iPhone IS plastic. Heh hopefully yours works out better, OP.
Mixed Views
Such mixed views - I have a feeling its down to having the patience to do the install properly - same my mates Diamond looks mint... hmmm
I had one of these for my Diamond and wasn't happy at all. I'm a very patient person but after a while it was just getting on my nerves. Trying to get it to bend around the case without leaving any air bubbles was just impossible. The parts that did stick down OK didn't look that nice either. It has a strange rubbery feel to it that I just don't like at all. I ended up ripping it off in frustration. Looked at their site and you can get your money back but you have to send it off to the states and I can't be bothered with the hassle or cost so I've just chalked it up as experience and will not recommend the product to anyone at all.
i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices
nuumuun said:
i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices
Click to expand...
Click to collapse
Would be great if you can post some pics front and back at a few angles in high light - not too much too ask surely lol oh and maybe put a cherry on top.
But seriously some pics would be great...
First off, hi guys - new HD2 (Leo) owner here and have to say I love it!!
Anyway, thought I'd just say something about this product. It's rubbish...
Poor fit, didn't stick properly and bubbles galore - stay well clear of it IMO
Anyway, will be lingering about as still getting my head about WinMo and the various ROMs about - still running stock 1.48 ROM out the box but it's an awesome phone and definitely glad I got it...
Well my friend, for a first post it's a good point well made. The HTC screen protectors are ****e! I managed to lay mine without bubbles, but at the bottom where it fits over the buttons it keeps lifting up and just doesn't settle properly. It's now starting to get crap underneath it, completely defeating it's intended purpose.
Final verdict... EPIC FAIL!
Oh and Welcome to XDA Developers EddyOS. I'm sure you'll be a flashaholic in no time.
ClownShoes said:
Well my friend, for a first post it's a good point well made. The HTC screen protectors are ****e! I managed to lay mine without bubbles, but at the bottom where it fits over the buttons it keeps lifting up and just doesn't settle properly. It's now starting to get crap underneath it, completely defeating it's intended purpose.
Final verdict... EPIC FAIL!
Oh and Welcome to XDA Developers EddyOS. I'm sure you'll be a flashaholic in no time.
Click to expand...
Click to collapse
Did yours come with a screen protector in the box? I didn't see one in mine but I may have overlooked it, or different packaging in Asia. So tomorrow I'm on a hunt to find one.
I dont recal there being one in mine either. Hmm maybe i should look alittle harder.
Maybe they ordered the original OEM ones from HTC as a side-order!?
I did, and mine are in the mail.
Should arrive tomorrow...
Hope they are not as bad as stated in this post...
Will be sure to comment on it here when I get them
Yeah, bought mine from the HTC Shop - didn't get any in the box...
Ordered mine too... complete waste of money
I got the official ones too, I thought it was me just fitting it badly as it didn't seem to fit the screen and had bubbles. I couldn't get it to sick below the buttons either. It had to come off. I got another one from Amazon and it now fits as I would expect it to.
I would not recommend the official protector from HTC, sorry.
What ones did you get in the end? Might be tempted to get one to be on the safe side but my phone does stay in it's pouch when not in use...
Why would you need to have a screen protector......
If you guys have been hiding under your bed sheets then its time to wake up.
Leo, AKA HD2 had a scratch resistant glass and not a cheap plastic face.
Just have a look at the following link and you will agree....
http://www.youtube.com/watch?v=NcEaehKWr2s
you need guts to do it, but i didnt have the guts to do that.
But atleast the screen protector is not needed.
Of course a screen protector is needed. It may be made of glass, but it's not bullet proof glass!
EddyOS said:
What ones did you get in the end? Might be tempted to get one to be on the safe side but my phone does stay in it's pouch when not in use...
Click to expand...
Click to collapse
http://www.amazon.co.uk/exec/obidos/ASIN/B002Y33M4W/ref=ox_ya_oh_product
This is the one I went for from Amazon. Fits much better than the official HTC one as it sits just slightly within the screen profile rather than exactly the same size. I have a 100% fix now.
But as one of the posts above points out, we shouldn't really need a protector on it because it is scratch resistant, but I go for peace of mind.
GUYS!
Please stay away from HTC screen protector. It is the worst screen protector I have ever had. First of all it is almost impossible to apply correctly, I had 4 and scrapped every single one! (just to say it is not the first device with big screen I tried to apply screen protector and I never had troubles before). Second thing is that it gets very smudgy.... for me complete waste of money.
petexx said:
GUYS!
Please stay away from HTC screen protector. It is the worst screen protector I have ever had. First of all it is almost impossible to apply correctly, I had 4 and scrapped every single one! (just to say it is not the first device with big screen I tried to apply screen protector and I never had troubles before). Second thing is that it gets very smudgy.... for me complete waste of money.
Click to expand...
Click to collapse
Completely aggree with you. I also waste 3 of them. finally a give up!
Not recomended!
My HTC screen-protectors arrived today...
And I have to admit, I didn't really believe the people writing about how bad they were.
But I have to aggree, what a piece of s***!
I got 2 in the pack, and the first one messed up on a biblical level for me.
The second one actually seemed to fit as intended, but I just couldn't get the corner to fit right...
I got away with no bubbles underneath, but the damn corner just couldn't fit.
We're talking a matter of milimeters here...
Stay away from them, like everyone else is saying
I'll join the chorus.
I ordered a pack of 2, and quickly noticed that they're very different from the (actually quite OK) HTC HD protectors.
The adhesive side seems to attract small particles from the air within seconds. Just one such small particle produces an ugly bubble. I don't want to be seen with such bubbles. My wife would call be "Bubble Boy".
Since the adhesive is quite strong, it's impossible to make minute adjustments the moment a part of the protector touches the glass. This is compounded by the exact measurements - even when I thought it fit wonderfully on one end of the screen, the other end collided with the screen bezel, making it a bust.
The protector is also very thin and flexible, so it is almost impossible to hold without bending and getting fingerprints underneath, further ruining its appearance.
This product should be retracted from the market. I completely understand why the HD2 doesn't come bundled with these protectors:
1. they're practically impossible to fit
2. the HD2's glass doesn't really need it
I'll live hard and fast, without protection.
What for?
My HD2 is rocking along very nicely without a screen protector... with this scratch resistant glass, I really didn't see the point.
I avoid putting my phone in the same pocket as my loose change or my keys - but that was a pretty easy adjustment to make.
... Just don't see what I'd want to use a screen protector for other than to take a beautifully slim piece of art look like something it's not.
skippinshanghai said:
My HD2 is rocking along very nicely without a screen protector... with this scratch resistant glass, I really didn't see the point.
I avoid putting my phone in the same pocket as my loose change or my keys - but that was a pretty easy adjustment to make.
... Just don't see what I'd want to use a screen protector for other than to take a beautifully slim piece of art look like something it's not.
Click to expand...
Click to collapse
I don't see how applying a screen protector that's probably less than 0.5mm thick will ruin the look of the device.
Its about personal choice
Screen protector or no screen protector? Condom or no condom? Safety glasses or no safety glasses? Its a matter of choice linked to a a personal assessment of risk, cost and benefit.
I always use one........
WB
fz9999 said:
Of course a screen protector is needed.
Click to expand...
Click to collapse
It's not "needed". It's scratch resistant glass - we have discussed this here before. It's the same type of glass you get with better watches. Do you use them with a protector? If you "want" damage the glass you can do this with force, but then a screen protector wouldn't help neither.
Hi to all,
Wanted to ask if someone has this case.
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty
I ordered it ( 26 July) and still waiting.
How it looks, and if its comfortable to use it daily at office
Thanks
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
thedavefitzy said:
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
Click to expand...
Click to collapse
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
I found this one
But would like to hear more, from someone hier
Hier some comments :
vivek 8 said:
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
Click to expand...
Click to collapse
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Sakisgre said:
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Click to expand...
Click to collapse
no problems typing. very slick. case double thickness of phone. front is thin film. sharp knock on phone by edge of the table will crack the screen. but brilliant piece of engineering. love it.
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
tsiglas said:
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
Click to expand...
Click to collapse
No problem with sensitivity.
Sent from my SM-G935V using XDA-Developers mobile app
https://smile.amazon.com/s/ref=nb_s...mic+2.0,aps,196&rh=i:aps,k:ghostek+atomic+2.0
not many good reviews on Amazon regarding this brand and case. It does look awesome though.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Sakisgre said:
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Click to expand...
Click to collapse
Ordered through mobilefun.com and took about 1 week when they had stock available.
Sent from my SM-G935V using XDA-Developers mobile app
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Uodate #2
Seems I forgot I still had the AT TGSP and for now no sensitivity issues at all and not like the Proglass has occurred. Will update if it does but for now this would be my combination of screen protector and case.
Sent from my SM-G935V using XDA-Developers mobile app
s.lanso said:
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Click to expand...
Click to collapse
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Sakisgre said:
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Click to expand...
Click to collapse
No it is not really necessary but as others mentioned this is plastic. But I feel that phone is safer if screen is protected by Tempered glass than films or plastic films. As there's no big lip on front and only thing protecting front the the plastic film I just rather be protected than not be.
Sent from my SM-G935V using XDA-Developers mobile app
Hello, Want to update on the case as you read my other post mentioning some openings on the home and earpiece, seems that was a faulty case as was missing films for the waterproofing that it supposed to protect.
Seems my first one was missing the films that go in the earpiece and home button so wasn't fully waterproof but had no sensitivity issues, the next one had high sensitivity issues on the top area where the first one didn't. Ghostek has been nice and quick in sending replacements and honoring their warranties. Right now I have the first one installed until I received the third case. As there is no sensitivity issues.
I did drop the phone from about 4.2 ft high with no damage. The phone fell front side. I do have a tempered Glass installed and no difference with or without on sensitivity. There does not seem to be any damage on the phone or case. The drop was accidental and kind of scary as well when it fell face front. Even though it was on a case. But glad I had the setup I had.
The only drawback I see is that with fingerprints I don't have a problem with the one with no films(1st case) but with the films on(2nd Case) the best way for it to read is putting your finger side ways. Which works all the time when you put your finger sideways but when upwards is a small chance that it would detect or not.
Just received mine today. Spotty fingerprint scanner, the screen has the little dots all over when you shine lights on it or are out in the sun, definitely a loss in touch sensitivity due to the front film not touching the screen unless you press down on it.
Hello friends, my question is, is that possible to call someone while using this case?
dyba83 said:
Hello friends, my question is, is that possible to call someone while using this case?
Click to expand...
Click to collapse
I've had no problems when I have good reception. The only times I have problems is when I have 1x when outside in small areas plus work truck kind of blocks signals.
But regular use with not problems on signal, I haven't had any complaints.