Comm Manager hangs (turning off wifi) - Touch Diamond, MDA Compact IV General

When turning off wifi through Comm Manager, it hangs sometimes (not often), device stuck @ Comm Manager with the Windows hourglass rotating, device does not respond to any hard buttons. Have to soft reset.
Anyone experienced similar problem?

same problem here with the same rom..

Hi,
probably there are some missing files (I already had this problem).
check \windows for these files in the attachment (from gullum)... if no present, copy them to windows folder, and soft reset.
This solve my problem with comm manager.

xkaiser said:
Hi,
probably there are some missing files (I already had this problem).
check \windows for these files in the attachment (from gullum)... if no present, copy them to windows folder, and soft reset.
This solve my problem with comm manager.
Click to expand...
Click to collapse
Same problem here, I'll try your suggestion. I hope it helps, it gets very annoying sometimes

Harnec said:
Same problem here, I'll try your suggestion. I hope it helps, it gets very annoying sometimes
Click to expand...
Click to collapse
I have copied the files xkaiser has suggested to my device and it seems it solved my problem, too.
Thank you very much I was starting to suspect about a hardware problem.

Related

Wifi not working on any HTC Comm Manager!

I have tested a few HTC Comm Managers(new black theme. Kaiser style) and low and behold non of them have the wifi working right. I cannot enable/disable it from the comm manager. Anybody find a real working one that does this? Even some that were claimed to be "FIXED" didn't work...
Anyone have a dump of the original also? (stock WM6)
I've got the same problem since the upgrade to WM6. Nothing works: soft-hard reset, upgrade... WLAN doesn't works (since comm manager).
me too...any solution mods?
Same problem here... The default WM6 HTC comm manager is working corectly.
anyone have a cab file of the original? incase i want to revert back to it?
You might find the fix here:
http://forum.xda-developers.com/showthread.php?t=326655&highlight=wing+10+button
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
When I try to do the change in registry, a new surprise: in the registry tree, after CommManager doesn't exist "WLAN", but numbers (0,1,2,3... and in 3 there's WLAN). The change in registry: NOT WORK YET!
I've found the problem (maybe...). In folder "Connections" there's not Wi-Fi icon... what it means?
pichetinhas said:
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
(
Click to expand...
Click to collapse
SAME THING HERE! No permission to do this! I hope this does not result in a hard reset.
OK, I finally got anew one installed. Even though I tried a fresh install after a reboot, I still couldnt get it installed. So, what I did was start commmanager, Bthen stop it in Settings > Memory > Active programs
REALLY A GENIE!!! I'll try it...
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
grizzley said:
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
Click to expand...
Click to collapse
hi, can you please point me to where you downloaded this??
hello
i have the same problem. wifi card not run.
the problem? http://forum.xda-developers.com/showthread.php?t=322225
i d´nt know.
anyone a idea? thanks
Do a search. You will find that you have to edit the settings in the registry for the comm manager.
I have this same problem. If anybody has a cab file of the stock tmo com manager, please post it!
Thanks in advance!
You guys...
Go into the registry and find out what the name is for the wireless adapter is. Take that information and change the adapter that is shown in the comm manager.
Thats really all there is to it.
If youre going to screw with the software, youre going to need to blood on your hands. You cant just throw stuff on the phones and expect it to work.
All right...
On my wing
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<DeviceName>
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETTWLN1
That is the adapter for my phone, might be the same for you.
If youre using the changable comm manager you will have to change the settings for the wlan setup.
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<Default>
\Windows\WrlsMgr.exe
Once again might be different for you.
Im using TouchIT 2.3 my stuff might be different.
I GOT IT
pichetinhas said:
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
Click to expand...
Click to collapse
If u wanna know your adapter go to
HKLM\comm\tcpip\linkage
mine is SDIO86861 and in linkage folder it is shown ppp SDIO86861
Hope this info helps u

Comm Manager Font Changed!

After updating HTC Home. The Font of my Comm Manager changed.
Does some1 know how to bring the original back??
I also tried to instal the 10 button comm manager but the font is still the same.
xmoo said:
After updating HTC Home. The Font of my Comm Manager changed.
Does some1 know how to bring the original back??
I also tried to instal the 10 button comm manager but the font is still the same.
Click to expand...
Click to collapse
Have you installed any SlovoEd dictionary? If yes... remove it because it causes problem to the fonts.
I had the same issue after starting Kaisertweak ... worked the second time after my next hard-reset
athanaso77 said:
Have you installed any SlovoEd dictionary? If yes... remove it because it causes problem to the fonts.
Click to expand...
Click to collapse
Nope, Don't know that program.
pencilcase said:
I had the same issue after starting Kaisertweak ... worked the second time after my next hard-reset
Click to expand...
Click to collapse
Hard reset :O
SPB Shell always changes the font on comm manager and kaisertweak on my kaiser. looked hard but could not find a solution on how to get it back. let me know if you find anything. tnx.
Hard Reset
Called the helpdesk and they didn't know as wel. So I made a hard reset. Now it works again.
Had the same problem when i installed a bible reader called e-sword. Found a solution:
In the Windows/Schriftarten (german) or Windows/fonts (should be the folder in WWE) there are normally no files in there. After installing the app there were three files in. I deleted the 3 files in the Windows/Fonts folder, closed the CommManager once (REAL close, don't forget) and started it again and voilà! Everything back to normal. No Hardrest needed
This happened to me the other day, after installing SPB Pocket Plus 4. It also managed to kill Tom Tom as well as screw with my fonts. I reinstalled TomTom though, and everything was OK again.
Same problem here.
I only see it in KaiserTweak, and SBSH Clock on the time console.
crawltochina said:
Had the same problem when i installed a bible reader called e-sword. Found a solution:
In the Windows/Schriftarten (german) or Windows/fonts (should be the folder in WWE) there are normally no files in there. After installing the app there were three files in. I deleted the 3 files in the Windows/Fonts folder, closed the CommManager once (REAL close, don't forget) and started it again and voilà! Everything back to normal. No Hardrest needed
Click to expand...
Click to collapse
Well my /Fonts folder was empty. So I had nothing to delete. The font change was in Comm manager + KaiserTweak.
Same thing over here
I am sure it is SPB Shell / SPB Tools 4 in my case. They both have a today plug-in that screws the font in comm manager and kaisertweak.
xmoo said:
Well my /Fonts folder was empty. So I had nothing to delete. The font change was in Comm manager + KaiserTweak.
Click to expand...
Click to collapse
Here's an easy fix if that happens, open up the fonts folder on your computer in the windows directory and copy the font called verdana in to the fonts folder in the windows directory on your phone, soft reset and after that you should be good again.
xeno1 said:
Here's an easy fix if that happens, open up the fonts folder on your computer in the windows directory and copy the font called verdana in to the fonts folder in the windows directory on your phone, soft reset and after that you should be good again.
Click to expand...
Click to collapse
Looool why coudn't you respone faster
Already hard-reseted it
danprodan said:
I am sure it is SPB Shell / SPB Tools 4 in my case. They both have a today plug-in that screws the font in comm manager and kaisertweak.
Click to expand...
Click to collapse
As I Already Said. I HAD NOTHING FROM SPB INSTALLED!
Tried copying the Veranda font as suggested ... but no go.
Same problem
Here is what KaiserTweak looks like ... see attached.
Any other suggestions would be most appreciated ... I only see this issue in a couple pieces of software. KaiserTweak, SBSH Clock ...
Same thing after installing WeatherPanel.
I experienced this after installing WeatherPanel. Went into \Program Files\Marsware\WeatherPanel\Themes\Default\
and deleted or renamed all *.ttf files. After a reboot everything went back to normal.
Hope this helps...
Proto732 said:
Tried copying the Veranda font as suggested ... but no go.
Same problem
Here is what KaiserTweak looks like ... see attached.
Any other suggestions would be most appreciated ... I only see this issue in a couple pieces of software. KaiserTweak, SBSH Clock ...
Click to expand...
Click to collapse
Damn that's very messedup. My font was cool and readable. Yours is fu up and not readable. I only think a Hard-reset would do the trick. Cause also installing other comm managers won't help you.
Also have the Comm Manager Font problem
I have the same problem. I installed a foreign language calendar, which put a font it needed into windows/font folder. Messed up Comm Mananger. The moment I removed the font, all was well.
Problem is that I need to use the foreign language calendar, which depends on the font!
Anyone know of a registry tweak to fix Comm Manager or otherwise allow the two to co-exist.
I don't think Comm Manager is using Verdana, so that doesn't seem to be the answer (although I haven't tried it yet).
Help from all the wise gurus out there would be appreciated.
bml5631 said:
I experienced this after installing WeatherPanel. Went into \Program Files\Marsware\WeatherPanel\Themes\Default\
and deleted or renamed all *.ttf files. After a reboot everything went back to normal.
Hope this helps...
Click to expand...
Click to collapse
AHHHHHHH! Thank you, thank you, thank you.
That was exactly the problem. I deleted the two TTF files and soft reset.
Thanks for the help!

VOIPWM6 and GPS

I've been trying to install Internet calling on my diamond, while I managed to get the VOIP working using the WM6VOIP (ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB) cab file and SIP Config, another problem showed up. I have tried even the last WMVOIP+SipConfig CAB package with the same results
The moment I install the WM6VOIP cab, the internal GPS function goes dead - it does not work anymore. Soft reset will not fix the problem.
It took me 3 hard resets to figure what exactly was causing the trouble
I guess the WM6VOIP cab overwrites some system files and/or registry settings vital to the GPS Receiver
Is there anyone who had the same problem or anyone who tried to enable Internet Calling on HTC DIAMOND. Any solution to this?
Same here
I had the same problem. Hard reset to fix it.
Something in the VOIP installation makes the GPS invisible to any app which tries to use it. Even the QuickGPS app would not work.
Too bad...I would love to have the VOIP option..but not over GPS.
same problem here
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
adamz said:
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
Click to expand...
Click to collapse
Nevermind. That one breaks GPS too and can't be uninstalled. *sigh*
same here... did you installed it manually or by a pack (containing sip config tool, gsm codec, bass fix and internet calling) ?
I installed the pack... and my gps died... but not on my HTC trinity.
Someone should install all the packages manually, one by one , and see how it goes.
Please post your findings.
Unfortunately I'm in the same boat :-(
daren1 said:
I had the same problem. Hard reset to fix it.
Click to expand...
Click to collapse
But I found solution:
Rename in windows directory following files:
\Windows\dnsapi.dll
\Windows\ipdialplan.xml
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
\Windows\ringback.wma
Delete all registry changes made by instalation which is described by author in post #66 in http://forum.xda-developers.com/showthread.php?t=401608&page=7, reset diamond and if you want you can delete now files which was renamed in previus step.
After that go to settings->System->External GPS->Access and remove tick from "Manage GPS automatically". After that confirm with OK and go one more time in the same place and turn it on "Manage GPS automatically". I'm not sure that this change are nessesary, but now I have working GPS whitout hard reset.
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
http://forum.xda-developers.com/showthread.php?t=415262
tof42 said:
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
Click to expand...
Click to collapse
I'd like to rename that files but I can't ! I use totalcommander but when i change name, nothinghappens and the ile get its name back !
Please help !!
Thx !
how to rename dll files
hi guys, like wanabo, i cannot rename any ROM file under \windows. i tried to use the default file explorer, total commander and resco explorer...no luck. every time i try to rename the dnsapi.dll file i get the error 'access denied'.
please can someone help?
thank you

Installation

Hi,
Im quite new on this HTC phones.
I have a problem, I dont know how to install software on the diamond.
It opens the files in Opera but it will not start the installation.
Do I have to have any program to install programs on the phone?
I have been trying to install tomtom 7 but it will not work.
Best regards,
Martin
Look on the internet for a cab file of TT7 copy and paste this in your internall storage in the map programmables. Disconnect phone from usb go to the place where you put it and run it from there.
This should work probably.
Grtzzz
I have the same problem too, but only happened while installing .cab file.
Anyone can help? Thanks a lot.
It dosent work.
I found the file here on the forum, I did active sync with my computer, I took the file, moved it the the 4g internal storage of the phone.
I tryed to start it but nothing happens.
Thats the problem i have, it seems that my phone dont want to start the cab files.
Should I just click the file or should I do something else?
Normaly just clicking is enough.
Sorry but are you shure its a cab file its not rarred or zipped.
Have you allready installed other programs this way?
For cab files i do not use activesync to put them on the device i simply do it in storage mode.
Grtzzzz
I found the way, I had to make a soft reset. Then it worked!

Camera suddenly disappeared. Help?

Today I found that my camera is not present in the programs. I did some power saving tweaks. I am not sure whether that has caused my camera to disappear or un installed or something unknown has caused it un installed.
How can I re install. Please help.
Thanks in advance.
mirchichamu said:
Today I found that my camera is not present in the programs. I did some power saving tweaks. I am not sure whether that has caused my camera to disappear or un installed or something unknown has caused it un installed.
How can I re install. Please help.
Thanks in advance.
Click to expand...
Click to collapse
The "Camera" exe file should be there in the Windows Folder. copy that, paste a shortcut in the start menu in the Windows folder itself. that should fix things. (if things havent gone too wrong).
karthiksk said:
The "Camera" exe file should be there in the Windows Folder. copy that, paste a shortcut in the start menu in the Windows folder itself. that should fix things. (if things havent gone too wrong).
Click to expand...
Click to collapse
Thanks karthiksk for reply.
I found two files. One HTC_camera and other Camera. Both I copied to start menu BUT still my camera not working. The icons are now present in programs menu but when I click on them nothing happens.
Further help will be appreciated.
mirchichamu said:
Thanks karthiksk for reply.
I found two files. One HTC_camera and other Camera. Both I copied to start menu BUT still my camera not working. The icons are now present in programs menu but when I click on them nothing happens.
Further help will be appreciated.
Click to expand...
Click to collapse
Here have this file downloaded on ur opal.
http://www.mediafire.com/?xfj3971uvy4pr8p
OR better reflash ur current ROM.
shreyas18 said:
Here have this file downloaded on ur opal.
http://www.mediafire.com/?xfj3971uvy4pr8p
OR better reflash ur current ROM.
Click to expand...
Click to collapse
Thanks shreyas18.
I installed the file but it didn't work.
Sorry.
mirchichamu said:
Thanks shreyas18.
I installed the file but it didn't work.
Click to expand...
Click to collapse
Try reflashing the rom...cant help much then.
I know this is gonna sound a little weird, but it happened to me, and this is how u can solve it, the problem its on the hardware of the phone not the software, so reflashing the rom wont do anything, since the problem is inside, firste turn off the phone, then remove the back lit, then lightly press with both of your finger the area surrounding the camera, (like trying to push on the opposite direction of the camera) then turn on your phone and go directly to the photo tab, on the touch flo, and that should do it
Lsagara said:
I know this is gonna sound a little weird, but it happened to me, and this is how u can solve it, the problem its on the hardware of the phone not the software, so reflashing the rom wont do anything, since the problem is inside, firste turn off the phone, then remove the back lit, then lightly press with both of your finger the area surrounding the camera, (like trying to push on the opposite direction of the camera) then turn on your phone and go directly to the photo tab, on the touch flo, and that should do it
Click to expand...
Click to collapse
no offence Lsagara, but i doubt its a hardware issue, even if it were a hardware issue there is no reason for the files to disappear
@mirchichamu:
1)What happens when you run the "Camera" file from the windows folder itself?
2)You could use M2DC to customize your softkey to access camera. What happens when you do that?
Same problem - File deleted
Hello,
The file you have provided above has been deleted from the Mediafire.
Were you able to locate any solution? Even I am facing the same problem.
karthiksk said:
no offence Lsagara, but i doubt its a hardware issue, even if it were a hardware issue there is no reason for the files to disappear
@mirchichamu:
1)What happens when you run the "Camera" file from the windows folder itself?
2)You could use M2DC to customize your softkey to access camera. What happens when you do that?
Click to expand...
Click to collapse

Categories

Resources