Once finished you will have:
IPL-0.20
SPL-0.24.0000
* Requires MiniSD card
On your PC
---
1. Copy the files in "jumpspl-urt.zip" to the root of your device. The detailed steps for this are:
i. Connect to your PC via ActiveSync
ii. Click "Explore" in ActiveSync
iii. Open "My Windows Mobile-based Device". You should see a dozen or so files.
iv. Drag-and-drop the files inside "jumpspl-urt.zip" into the "My Windows Mobile-based device" window, which is the root of your device.
2. Prepare a FAT32-formatted SD card with CHEEIMG.nbh (tested using 81Mb image extracted from Treo750_2_30_VF_NZ_DesktopUpdater)
i. CHEEIMG.nbh has to include the bootloader to be flashed
ii. This particular bootloader ONLY accepts SD cards or Serial, no USB connection, until you've flashed, then it supports USB.
On your device
---
1. Open "File Explorer". Browse to the root of your device.
2. Insert your SD card with CHEEIMG.nbh
3. You will need to press the bootloader key (side convenience key) while clicking on "jump-urt". Press the bootloader key 1 second BEFORE you click on "jump-urt". Keep holding the side convenience for at least 5 seconds until the bootloader screen actually appears.
4. Upgrade starts (let go of convenience key now). My device rebooted after 10 seconds and continued upgrading again. I assume this was due to the bootloader needing to be restarted.
Q&A:
Q: Can I now get rid of hermes radio from hell (1.54.30.10)?
A: No, as the radio bootloader itself won't talk to this bootloader (or any other Cheetah bootloader known to man at the moment ). Damn thing. I only downgraded bootloader to try and get rid of it.
According to summiter, someone would have to convert a Hermes bootloader to Cheetah (similar code, but different memory locations) before we can get rid of the 1.54.30.10 radio rom. Using an older bootloader like this doesn't help.
Q: Does task 2a work?
A: When tested with radio rom 1.54.30.10: No, same as hard-spl. I would've thought it would work actually, but no.
Q: How do you know this has really worked?
A: You can't flash anything other than factory roms
Q: Why would you want to load this?
A: Selling the device, sending in for warranty etc.
Thanks for the suggestion. I tried your procedure but it did not restore the original SPL.
re
When you ran the jump-urt program from File Explorer on the device, what happened?
- Were you prompted to "Run this program"? (You won't be if you've already removed the security requirements from the phone by unlocking it)
- Did it reboot to the tri-color bootloader screen?
- What did the IPL/SPL versions show? They should show already the 0.20/0.24 versions at this point.
Was the jump-urt program in the root of the device - not in "my documents"?
Hi,
My 750 is an unlocked 750 from the start. When I clicked the jump-urt program (all in root directory) from Explorer it started I was prompted to run jump-spl. I said yes then the I was booted to the tri-color screen. Bootloader update from the sdcard was immediatelt started after I press the red poweroff button. After the successful update still the bootloader showed olipro 1.4.
re
Try do the same process, but leave out the SD card. This way it will stay on the bootloader screen - can you let me know what ipl/spl versions are shown?
Still it did not work. Still showed Olipro 1.4. Anyway I gave the Treo to my sister as a gift. She does not care nor understand this bootloader problem.
awojtas said:
Once finished you will have:
2. Prepare a FAT32-formatted SD card with CHEEIMG.nbh (tested using 81Mb image extracted from Treo750_2_30_VF_NZ_DesktopUpdater)
i. CHEEIMG.nbh has to include the bootloader to be flashed
Click to expand...
Click to collapse
Hi, Can you please confirm something. I looked at the files in the desktopupdater.zip (voafone Australia 2.18)
CHEEIMG.nbh is ony 258KB not 81MB. However, the CHEEIMG_FW.nbh file is 81MB
Do I put both CHEEIMG.nbh and CHEEIMG_FW.nbh on the SD card? or do I rename CHEEIMG_FW.nbh to CHEEIMG.nbh and put that on the SD card?
rename cheeimg_fw to cheeimg.
Finally go around to trying this. does not work for me either.
ok... but if the phone dosen't boot/start... how can i remove it?
Here's the way to remove SPL-1.40.Olinex:
1- Download the attachment from this post:
http://forum.xda-developers.com/showpost.php?p=1562747&postcount=1 and put the file JumpSPL.exe in "\My Documents" (on the Palm).
2- Download the attachment from awojtas and put the file urtspl.nb also in "\My Documents".
3- Run (from the Palm) the file JumpSPL.exe and replace 0x0000000 for 0x30080000 when asked. Then it will ask for a .nb file, select "All folders" and click on urtspl.nb and quickly press the camera button. If the device reboots, try again and be faster this time.
After this you should now see:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
Do it all again with a SD card in and whatever .nbh you want inside it and wait for flash process to finish.
That's all.
Cheers!
mabe the wrong post...but how do you UN-remove Hard SPL (aka... put it on your phone)?!
LOL
is that possible for me to use this method for my panther(treo pro) since similar system configuration for both 750 & 850
OMG it finally does work
Thanks !!!
I used CHEEIMG_FW.nbh (renamed to CHEEIMG.nbh) from 2.27 ROW Updater
And this fixed the programs folder/menu lag in factory ROM
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw an earlier post that suggest to place the original 6.0 on a freshly formatted SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Someone please help.... I'm sure someone has some suggestions.
By the way, I've tried RUUwrapper and that didn't help either.
Thanks in advance
I've got the same problem and finally I can solve my problem.
The procedure :
1. Open mtty and by connection via usb, just do :
Command mtty:
- task 2a
- flash:
[1- press enter
2 - type "set 14 0"
3 - type "task 28 55aa"]
you shoul see now the program runing a lot of things that I don`t remember what...
then when it ends try the SD instal...
If It still doesn`t work then:
[1- press enter
2- "erase"
3- "checksum"
4- "checkimage"
5- "task 0"]
then reflash your radio & OS by SDCARD...
- set 16 0 0
- info 7
- info 8
2. It means your PDA has no ROM OS and Radio.
3. Copy CHEEIMG.nbh (ROM OS) to formatted SD Card.
4. Insert the SD Card to PDA and just install by push the 3rd side button together with soft reset (by stylus).
5. Replace file CHEEIMG.nbh (ROM OS) with CHEEIMG.nbh of Radio.
6. Do same procedure as number 4.
First your phone must be CID unlocked to make a backup image
Programs you will need
MTTY
USB Image Tool "Developer’s web site"
Instructions:
1. Open ActiveSync go to Connection Settings and uncheck “Allow USB connections”.
2. Put the phone in boot loader mode.
Turn the phone off press and hold the Camera key, now insert the USB cable, Keep holding the “Camera” key until you get the boot loader screen.
3. Insert formatted SD card, 128mb or larger.
4. Start MTTY select Port: = USB click the “OK” button, you don’t need to change anything else.
5. Type “set 32”
“CMD55 failed” = SD card not properly inserted.
“g_cKeyCardSecurityLevel = 0” = CID unlocked, if not you didn’t read the first line of this post.
6. Type “r2sd all” this will create a full backup, don’t interrupt the process, wait for it to finish.
7. Type “ResetDevice”
8. Remove SD from phone, insert SD to computer.
9. Open USB Image Tool, select “Device Mode” from the drop down list, select the SD card and click “Backup”.
To write the SD image to an SD card select the SD card you want to write to and click “Restore”.
Now we move on to restoring the image to the phone.
With the phone on, insert the SD card in the phone, press and hold the “Camera” key and soft reset, keep holding the “Camera” key.
When asked, “Download SD Image?” release “Camera” key and press the “Voice Dial” key.
Hopefully that covers it.
This could be a viable way for people who have broken USB ports to restore/upgrade their phones.
Current images:
These are official stock ROMs
Cingular 8125 G3
T-Mobile MDA G3
T-Mobile MDA G4
I will list more as I make them
Reserved For Future Post
Tried image on my phone and it did not work. So I opened MTTY and ran ( set 32 ) and got
Code:
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
I believe FF means it is locked.
So I tried info 1 which gave 2.21.Olipro.
Sounds like I broke the HardSPL but did not change the SPL from 2.21.Olipro.
Sounds like truly a brick now.
You are correct.
g_cKeyCardSecurityLevel = FF
Means CID locked.
I noticed a few downloads have been made but no comments.
What I want to know:
1. Did the ROM images work?
2. Do you have a broken USB port?
3. Did you have another reason for downloading the image?
What im trying to get from these questions:
1. Has anybody been able to use these images?
2. Should I continue to upload images?
3. Was this thread pointless?
-MyHTC- said:
I noticed a few downloads have been made but no comments.
What I want to know:
1. Did the ROM images work?
2. Do you have a broken USB port?
3. Did you have another reason for downloading the image?
What im trying to get from these questions:
1. Has anybody been able to use these images?
2. Should I continue to upload images?
3. Was this thread pointless?
Click to expand...
Click to collapse
Well, i'm about to try to use the T-Mobile G4 image on my WWE QTEK9100 G4. Its stuck in the screen right after bootloader (that shows the versions) and i can't get it to boot or flash anything. I just want to get a ROM in it that boots so i'll see if that works.
Thank you for responding.
I noticed from your other thread that your using the hard SPL and your having problems installing ROMs.
With the hard SPL installed im not sure this method could help you, please let me know if it does.
If your still having problems let me know I will try to help.
Ok after many many hours of frustration I finally got the phoone rooted, have the superuserapp so it must have been done right!?
Had Windows 7 64bit version, so this is how I did for all others trying.
* Downloaded Android SDK, extracted it contains to c:
* Started the SDK Setup and closed the first update-asking-program
* Checked out “Force https:// … using http://” under Settings
* Selected “SDK Platform for Android 2.1″ and “Usb Driver package in "avalible packages" and installed them.
* Closed the program.
* Downloaded this files: http://depositfiles.com/en/files/yz4rg8u3i
* Started phone in normal mode and plugged in to the PC
* Go in to device manager, choose "update driver" for the ADB.
* Select “Browse my computer for driver software”
* Choose “Let me pick from a list of device drivers on my computer”
* Choose “Mobile devices” (NOT the ADB Device that comes out first on the list)
* Locate the driver to the downloaded 64bits driver and it will install the adb.
* Start the unrevoke-program and VOILA!! IT worked!! After hours and hours of frustration!
Click to expand...
Click to collapse
The ADB changes to HTC something, dont know if it supposed to be like that? Havent really checked if the ADB is working. Is that neccessary if I want to install WildPuzzleRom? Or is Busybox an alternative then?
OKAY after explaining how I did, my question then:
* Is it okay now to try installing WildPuzzleRom
* Do I have to do a nandroid backup BEFORE that?
* Do I need to make an goldcard for this?
* Do I need a USB card-reader-adapter for this? (If I must connect the SD to the computer for putting files on to it o format it or something?)
* Is 2gb enough for that? Considering that I want have mp3s, movies etc on the card, just for flashing roms and downloading fun apps.
Akerhage said:
Ok after many many hours of frustration I finally got the phoone rooted, have the superuserapp so it must have been done right!?
Had Windows 7 64bit version, so this is how I did for all others trying.
The ADB changes to HTC something, dont know if it supposed to be like that? Havent really checked if the ADB is working. Is that neccessary if I want to install WildPuzzleRom? Or is Busybox an alternative then?
OKAY after explaining how I did, my question then:
* Is it okay now to try installing WildPuzzleRom
* Do I have to do a nandroid backup BEFORE that?
* Do I need to make an goldcard for this?
* Do I need a USB card-reader-adapter for this? (If I must connect the SD to the computer for putting files on to it o format it or something?)
* Is 2gb enough for that? Considering that I want have mp3s, movies etc on the card, just for flashing roms and downloading fun apps.
Click to expand...
Click to collapse
Is it okay now to try installing WildPuzzleRom--Should be fine
* Do I have to do a nandroid backup BEFORE that?---Definatley
* Do I need to make an goldcard for this?---nope,copy files to sdcard then boot into clockwork recovery, select install file from sdcard.
* Do I need a USB card-reader-adapter for this?---nope, i just plug my WF into usb and copy files onto it.
* Is 2gb enough for that?---You may want to get a bigger card, i use a 8gb.
Lastly do a nandroid backup, reboot phone, plug into usb and copy whole clockworkmod folder off sdcard onto your pc. In case you accidently format the card and lose the backup.
tigger69 said:
Is it okay now to try installing WildPuzzleRom--Should be fine
* Do I have to do a nandroid backup BEFORE that?---Definatley
* Do I need to make an goldcard for this?---nope,copy files to sdcard then boot into clockwork recovery, select install file from sdcard.
* Do I need a USB card-reader-adapter for this?---nope, i just plug my WF into usb and copy files onto it.
* Is 2gb enough for that?---You may want to get a bigger card, i use a 8gb.
Lastly do a nandroid backup, reboot phone, plug into usb and copy whole clockworkmod folder off sdcard onto your pc. In case you accidently format the card and lose the backup.
Click to expand...
Click to collapse
* Thanks! A quick answer! Okay, so to put the files on the SD-card via USB, do I have to use adb then? Or can I just put the phone as a usb-device and drag the files to the sd-card?
* Is there an easy guide to do the nandroid backup? It says something about installing new SPL before and stuff I really dont understand.
Akerhage said:
* Thanks! A quick answer! Okay, so to put the files on the SD-card via USB, do I have to use adb then? Or can I just put the phone as a usb-device and drag the files to the sd-card?
Click to expand...
Click to collapse
You Can Perform File Transactions normally , don't worry. You don't need ADB for that.
Akerhage said:
* Is there an easy guide to do the nandroid backup? It says something about installing new SPL before and stuff I really dont understand.
Click to expand...
Click to collapse
Pree the Volume Down key along with the Power Key
Wait for a few moments after HBoot gets loaded
Press Voume Down until it Highlights 'Recovery'
Press the Power Key once
You Should be into Recovery now
Go to nandroid
Backup
Confirm Backing up
Process should get started
After a Moment Backup should be completed , make sure you have 170~300MB Left in your Memory Card
You should be done by now
Also to get BusyBox working you will need to Have a ext3 Partition on your SD Card , Do it via ROM Manager.
ext3 Partition can also be utilized if you use the Dalvik2SD Patch
cybercool10 said:
You Can Perform File Transactions normally , don't worry. You don't need ADB for that.
Click to expand...
Click to collapse
Okay, thanks, but then I dont set the phone to "just charge", Im going to put it as "disk drive"?
For the nandroid, I did that directly after rooted with unrevoked, but got an error-message when it was done, something said about the sdcard.
And, with busybox, is that neccessary than? Ceybercool10 said I could use only USB, and that sounds easyer. I dont know what ex3partition is.
To Mount it as Disk Drive do this :
> Go to Home Screen -> Menu -> Settings -> Connect To PC -> Check "Ask me" ->
Or
Go to Default Connection Type and Change it.
In 'Ask Me' Phone will ask you everytime , what to do with the USB Connection to PC , Mount as Disk Drive , Network Sharing , Charge Only or Sync.
Tryed again, maybe it worked, but got this errormessage:
"No sd-ext found.
Skippin
g Backup of Sd-ext.
Generating md5sum...
!Backup complete"
Is this what you mentioned I have to fix with the ext3 partition?
cybercool10 said:
To Mount it as Disk Drive do this :
> Go to Home Screen -> Menu -> Settings -> Connect To PC -> Check "Ask me" ->
Or
Go to Default Connection Type and Change it.
In 'Ask Me' Phone will ask you everytime , what to do with the USB Connection to PC , Mount as Disk Drive , Network Sharing , Charge Only or Sync.
Click to expand...
Click to collapse
Yes, I do now how to change that, but only want to be certain that the option should be "Mount as disk drive" when using the phone to put files on the SD-card for flashing etc?
Akerhage said:
Tryed again, maybe it worked, but got this errormessage:
"No sd-ext found.
Skippin
g Backup of Sd-ext.
Generating md5sum...
!Backup complete"
Is this what you mentioned I have to fix with the ext3 partition?
Click to expand...
Click to collapse
Thats not an Error , Backup was done Successfully
Akerhage said:
Yes, I do now how to change that, but only want to be certain that the option should be "Mount as disk drive" when using the phone to put files on the SD-card for flashing etc?
Click to expand...
Click to collapse
No , Just Put the Files for Flashing normally on the card , You will be able to later browse and select which file to flash via ClockWorkMod , So literally you can put the files anywhere on your sdcard !
cybercool10 said:
Thats not an Error , Backup was done Successfully
Click to expand...
Click to collapse
Sweet! thanks! So I would now store this on my computer then? And now I am clear to explore my phone and can try to install WildPuzzleRom, and if something is F_cked up, I can just do a restore with this backup later on?
cybercool10 said:
No , Just Put the Files for Flashing normally on the card , You will be able to later browse and select which file to flash via ClockWorkMod , So literally you can put the files anywhere on your sdcard !
Click to expand...
Click to collapse
Its just this I dont understand, if I cant see my device in "my computer", how do I put files on to it? Using Cmd and some commands?
Akerhage said:
Its just this I dont understand, if I cant see my device in "my computer", how do I put files on to it? Using Cmd and some commands?
Click to expand...
Click to collapse
Why exactly you cant see your device ?
Warlord711 said:
Why exactly you cant see your device ?
Click to expand...
Click to collapse
Havent tested yet, but if I have the phone as "charge only" is it still coming up as a device, etc "g:"
Akerhage said:
Havent tested yet, but if I have the phone as "charge only" is it still coming up as a device, etc "g:"
Click to expand...
Click to collapse
No it doesnt. You have to connect as device. This will unmount the sdcard for the phone itself but mount as a device for your computer.
Another way is to use adb.
You can use
Code:
adb push <pathtoyourzipfile> /sdcard/
Since you not common with linux and/or command line, i suggest you use the default way and mount your phone's sdcard as a devce to your windows pc.
Warlord711 said:
No it doesnt. You have to connect as device. This will unmount the sdcard for the phone itself but mount as a device for your computer.
Click to expand...
Click to collapse
Yes, thats was exactly what I was wondering about, but got another answer before wich made me wondering again. , so now its just as simple as to put the WildPuzzleRom files on the SD-card and flash via ClockWorkMod? - starting in the orders that the author has placed them in the "download list"?
After backing up the Files and putting the flash files on SD , Just follow up the Instructions on WPR Installation , All will be fine if you go by the Instructions
Yes that should work - i never used PuzzleRom but self-cooked Updates and others.
Copy the files on sd, then flash+boot/reboot.
The How-To should cover that point.
cybercool10 said:
After backing up the Files and putting the flash files on SD , Just follow up the Instructions on WPR Installation , All will be fine if you go by the Instructions
Click to expand...
Click to collapse
Thanks! Going to try this when I come home!
Do I start every file the same way later?
Its not the simplest instructions to follow...etc
3.Insert a new formated sdcard with NO ext-partition, did a full WIPE (Should I formate a SDcard on the computer and then put it on the phone? - sais nothing on were to put the flashfiles etc, because the 001 WPR should now be here, right?)
5.Started Rom Manager and choosed Partition SDcard (Is Rom manager a program on the phone? Or something I have to install on the computer?)
6.Had to install clockwork recovery and choosed model wildfire when asked (do you install this via Rom manager? Or is it something I have to download by myself?)
11.Unmount SDcard and start Rom Manager, choose similar to "reboot into recovery" for manual installation (unmount from computer and put in to wildfire again? And now put ALL THIS ON THE CARD?? NOT RENAMING ANYONE TO "Update.zip"???
* 0050_htc_froyo_2.2_orginal_kernel_v1.zip
* 0400_mods_disable_keypad_changes_v2.zip
* 0401_mods_enable_trackpad-to_wake_up_disable_power-v2.zip
* 0900_orginal_framework_stock_battery_icon_v5.zip
* 0903_7steps_circlemod_colorful_v4.zip
* Radio_13.53.55.24H_3.35.19.25.zip OR/AND Radio_13.45.55.24_3.35.15.31.zip
And here install in the order that they are now? with radio last?