Had Newbie 1221's WM 6.1 on my G3 Wizard (IPL/SPL 2.26) and it was working somewhat intermittently (random reboots and crashing), then the mini-USB port fell off the bottom which I duly fixed, the USB port now works as I can sometimes get into the bootloader and get it to display "USB" at the bottom.
But at the moment it seems to sometimes not even turn on, then when it does after about 15 seconds there will be lines across the screen and it will just reboot. When it's in bootloader mode you can sometimes get it to display USB but other times it'll display USB then give you lines and just crash out.
Is my Wizard just royally naffed or is this a common problem (with a fix?)
Any help is appreciated,
Ruan
Related
Yesterday I took my battery out of my phone to remove the dust from inside the phone. When i replaced the battery back into the phone, it booted up into the tri-color screen and has been there ever since. I haven't modified the phone since receiving it from AT&T at all. When i actually noticed the problem I tried to reset the phone through the hole on the bottom of the phone. At first, it booted up normally but was out of batteries since it had been running on a bright screen for a couple of hours. Thus it turned off immediately. I have tried to reset it again but it seems to do nothing. Since then when I put the battery back in and I turn the phone on it returns to the tri-colored screen and it says SERIAL in the bottom white area. When plugged into my computer it says USB in the white area. On the top of the tri colored screen, in the red area, it says:
KAIS1*0
SPL-1.56.0000
CPLD-8
I thought about downloading the newest ROM update from HTC but my phone wont sync with my computer, and the tutorial says it needs to in order to install properly. If anyone could help, please let me know!
Update!
I put the battery back into the phone and it booted up just fine....it was a little slow and worked normally for a couple of minutes. Soon it started to act up. When i plugged the phone into my computer it automatically started to freeze, when i unplugged it from the computer it would work just fine! I then turned my phone off again and now it is back to the tri-color screen again!
try hard-resetting the phone.
To do this, hold down the two soft keys at the front while pushing the stylus into the reset hole. Just make sure to back up any data you want, as it will delete it all (files, contacts, etc.)
Tried a Hard Reset
When I finished it, it just went back to that tri-colored screen. Now the phone will turn on every 10th time i try and work for a couple of minutes. When the screen turns off it wont turn back on when i push the power button. The green light still blinks though.
I have been having this exact same problem for a little while now, any help would be more than appreciated.
EDIT: Everything about the phone was AT&T stock ROM from Oct. '07.
i think it replacement time
hi all once again.i was using my kaiser yesterday then my phone went into tri screen.tried hard reset soft reset.phone reboots in tri screen.im using Duttys Official WM6.1 Rom 5.2.19716 UC.
ihave kais130 mfg /spl 1-0.0lipof /cpld-8 on screen.
if there is a solution to this i would appreciate help in resolving.thanks in advance
Another sad update!
Well as of this second my phone works okay...slower than usual....but in an hour or so the screen will turn off and the phone will stop working, i will take the battery out.....wait about 45 minutes and hope that it boots up normally. No one has any idea why this is happening to multiple people? I have had this phone for maybe 3-4 months. Is the failure rate that broad and fast on these phones???
WTF
This phone is ridiculous. Now if I keep the phone plugged into my computer so the screen wont time off, the phone works just as normal. The moment I unplug the phone from charging it decides to die on me after an hour or so!
this happened to me last nite.
spent hours and hours trying to fix.
ended up reflashing orig att rom..
everything is fine..
proceeded on to a cooked rom and all is well..
added some apps ..
so far -- awesome
Good News!
Magically my phone started syncing with my computer randomly. Thus it allowed me to flash the rom with the original ATT rom and so far my phone is back to normal working great!
tri screen sorted
i bought my kaiser off ebay..i couldnt sort tri screen.i had various roms on at various times .i had no warranty. on pay as you go.decided to take to local o2 shop.got it back today fully working for free.took them 8 days.
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
You better take a look here for a solution : http://forum.xda-developers.com/showthread.php?t=423486
jezzaflyboy said:
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
Click to expand...
Click to collapse
So I had some water damage to my tilt. At first it would only boot to the tri-color screen after I dried it. Now it fully boots but when winmo opens it says that the sim door is unlocked and it will turn off in 10 seconds. htc home is running in the background, and sometimes, for a few seconds it connects to activesync, then the phone turns off. I also noticed that it connects to winamp when the phone is off and just plugged into the usb.
I'd like to think that reloading the ROM would fix this. Is there a different way to load ROMS? Does anyone have any ideas on how to fix this? I would appreciate any advice. I wouldnt mind waiting for the FUZE but need a phone till then.
Few hours ago i unlock my phone, there was a problem with radio rom, and my friend recommend to install Kaiser HyperDragon III_WWE version of WM6.1.
I install it, play 5-6 minutes and after this check some delay problem. I make soft restart and after this phone touch screen don't work.
Touch don't response. Made hard restart ... and it's the last think that i did.
At startup i check this "tap the screen to setup your windows devices ....", but as touch screen don't response .. i don't have any progress.
Try to resintall the same WIN6.1 version, but no changes.
Any advice? what's the problem.
Is there any way to fix it ?
sounds like a hardware problem. Most likely the wiring is bad or corroded. You'll need a new screen or you might be able to fix the wiring. I kind've don't like the fact that our kaisers vibrate at startup because you think it would eventually rattle something loose which may have happened in your case. Before getting a new screen though, load a new ROM. To do it without activesync enter the bootloader mode by pressing down the camera and power button at the same time while the phone is off. Then connect your phone and it should say USB after a few minutes. Then flash
http://forum.xda-developers.com/showthread.php?t=485288
Please Read This Thread...
Because I had almost same problem like your's...
Try the install HardSPL...
Hello, I know there are many posts about dead Diamonds but I think my situation is different. I went to sleep one night and left my HTC to charge from my PC's USB. It was charging correctly because I noticed the light around the center button. All good. When I woke up, the charging light was still present and I unplugged the phone from the USB and the light was still surrounding the center button. The screen wouldn't turn on so I had to remove the battery. After I removed the battery and place it again in my HTC, it didn't want to turn on... I have tried to recharge it but the light doesn't flash anymore.. Not on my 220 socket, not on USB... I have a ROM found on this forum and been using it for 8 months with no problem... I just found my HTC froze at the charging step and removed the battery. After that it just won't start... I have managed two times to power on the device by it's normal power button but when it gets to the home screen, it freezes and I have to remove the battery again. It's been 7 days now and I can't power on once... Do you have any idea what happened ?
Thank you
If it keeps freezing at the home screen you are going to have to do a hard
re-set to unlock it. My Diamond froze at the home screen once when it was
new. I did a hard reset and it was fine after that. You will lose your data.
jbh00jh said:
If it keeps freezing at the home screen you are going to have to do a hard
re-set to unlock it. My Diamond froze at the home screen once when it was
new. I did a hard reset and it was fine after that. You will lose your data.
Click to expand...
Click to collapse
Yes, the problem is that it won't turn on now... I can't do anything...
namo77
Hi
I have got more less same problem , when i try to turn it on ; show touch diamond in the middle of black screen and 3 line digit on the right bottom corner in red ( R , G and D ) , and that is it nothing else , when i tried to connect it PC it's not establishing conection as well so i am really stuck don't know what to do , please any help advise how to fix it .
thanks of any tip or advise thank you very much
am having the same problem
i've got the same issue here, i can't recharge my htc diamond, the charging light won't show up or it shows up twice and then nothing..i managed to start the device a couple of times but it's really strange beacuse the battery level is signe always at zero and then the device restarts itself ...
so, resuming:
i can't recharge the device
it freezes sometimes
how can i fix this problem?...
Hi i have a few issues on my diamond. I hope you guys could help..
1st issue: lately my diamond keeps on resetting by itself.
2nd issue: later I've learned that when I record my voice using the software within the ROM, I don't hear anything but when I record my voice using my htc headset/earphones there is a sound.
What I did was:
This day I've flashed a new rom (Energy Rom) into my Diamond. It works ok then I flashed the Radio (Radio_1.13.25.24). I was able to use my diamond for a few hours.
Now..
3rd issue: My diamond is not powering on..
What i did before this happened was...
I pressed and hold the power button for about a few seconds so the ShutXP would pop up and I could soft reset my diamond.Before I clicked the soft reset button, I was checking out all the functions of it. then i clicked, a little icon,which is the Setup Timer Action. Here's the setup:
Action: Turn Off Pocket PC
In: (i don't exactly have seen the time indicated)
As curious as i am, I Clicked the Set Action button. It did shut my diamond off. Then I tried turning it on, but all it was doing was vibrate and the screen was black. At first I was hearing the start up sound a few times but later it didn't hear it anymore. I plugged in the charger but there's no white light on the circle button which used to have a light on the borders of the circle button when plugged in the usb cable. I tried pressing the power button plus the Volume down so the bootloader would appear but it did not. What shall I do?
Are you sure that the screen working because the phone vibrate and play the startup sound so if think its the screen that have som serious problem !!
HELP
I also flashed a new rom (Energy Rom) into my Diamond before.
It cannot run window mobile6.5.........how can I do???
I cannot connect to PC .......
I recently also had a similiar problem, after attempting a flash of the Rom, the ROM update stopped halfway through and reported that it had lost connection to the device....
The whole phone would not vibrate/power on, nothing - no glowing ring around the middle button to indicate it charging at all.
I had to return to the repair centre and somehow they didn't notice that I had modified the firmware and replaced the whole phone for free citing a hardware issue ...
Doesnt sound good if you cannot hard reset the device