Yesterday I took my battery out of my phone to remove the dust from inside the phone. When i replaced the battery back into the phone, it booted up into the tri-color screen and has been there ever since. I haven't modified the phone since receiving it from AT&T at all. When i actually noticed the problem I tried to reset the phone through the hole on the bottom of the phone. At first, it booted up normally but was out of batteries since it had been running on a bright screen for a couple of hours. Thus it turned off immediately. I have tried to reset it again but it seems to do nothing. Since then when I put the battery back in and I turn the phone on it returns to the tri-colored screen and it says SERIAL in the bottom white area. When plugged into my computer it says USB in the white area. On the top of the tri colored screen, in the red area, it says:
KAIS1*0
SPL-1.56.0000
CPLD-8
I thought about downloading the newest ROM update from HTC but my phone wont sync with my computer, and the tutorial says it needs to in order to install properly. If anyone could help, please let me know!
Update!
I put the battery back into the phone and it booted up just fine....it was a little slow and worked normally for a couple of minutes. Soon it started to act up. When i plugged the phone into my computer it automatically started to freeze, when i unplugged it from the computer it would work just fine! I then turned my phone off again and now it is back to the tri-color screen again!
try hard-resetting the phone.
To do this, hold down the two soft keys at the front while pushing the stylus into the reset hole. Just make sure to back up any data you want, as it will delete it all (files, contacts, etc.)
Tried a Hard Reset
When I finished it, it just went back to that tri-colored screen. Now the phone will turn on every 10th time i try and work for a couple of minutes. When the screen turns off it wont turn back on when i push the power button. The green light still blinks though.
I have been having this exact same problem for a little while now, any help would be more than appreciated.
EDIT: Everything about the phone was AT&T stock ROM from Oct. '07.
i think it replacement time
hi all once again.i was using my kaiser yesterday then my phone went into tri screen.tried hard reset soft reset.phone reboots in tri screen.im using Duttys Official WM6.1 Rom 5.2.19716 UC.
ihave kais130 mfg /spl 1-0.0lipof /cpld-8 on screen.
if there is a solution to this i would appreciate help in resolving.thanks in advance
Another sad update!
Well as of this second my phone works okay...slower than usual....but in an hour or so the screen will turn off and the phone will stop working, i will take the battery out.....wait about 45 minutes and hope that it boots up normally. No one has any idea why this is happening to multiple people? I have had this phone for maybe 3-4 months. Is the failure rate that broad and fast on these phones???
WTF
This phone is ridiculous. Now if I keep the phone plugged into my computer so the screen wont time off, the phone works just as normal. The moment I unplug the phone from charging it decides to die on me after an hour or so!
this happened to me last nite.
spent hours and hours trying to fix.
ended up reflashing orig att rom..
everything is fine..
proceeded on to a cooked rom and all is well..
added some apps ..
so far -- awesome
Good News!
Magically my phone started syncing with my computer randomly. Thus it allowed me to flash the rom with the original ATT rom and so far my phone is back to normal working great!
tri screen sorted
i bought my kaiser off ebay..i couldnt sort tri screen.i had various roms on at various times .i had no warranty. on pay as you go.decided to take to local o2 shop.got it back today fully working for free.took them 8 days.
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
You better take a look here for a solution : http://forum.xda-developers.com/showthread.php?t=423486
jezzaflyboy said:
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
Click to expand...
Click to collapse
I've just purchased a diamond and am having a lot of different issues. The phone boots and starts ok but it reguarly locks up. Windows crashes reguarly and the touch screen stops working. You can control the phone from the bottom buttons but without turning it off and on again the screen wont work. The windows errors are to do with device.exe and gres.exe
Phone also wont connect to the network even though it is unlocked, have flashed it with 1.3 olli to see if that would fix it but i hasn't.
Phone randomly turns off and re-starts.
Does anyone have these kind of issues as the phone is unusable?
Send it back for a replacement, seems like the phone is faulty and i wouldnt try fixing it.
Hey, folks! Been awhile since I've been in the forum. I've got a Tilt running Dutty's 5.2.19209.
At some point yesterday my phone starting shutting off randomly at the second splash screen (after the animated one).
If I leave the SIM card door unlocked, I can go past this screen, but I soon get an error message saying to lock the door, and the phone shuts down.
I can enter the HardSPL tri-color screen and I can reflash to different ROMs. I'll get through the screen alignment and time setting and my device will start to customize, and then I get that darned message saying my SIM card door is unlocked (even though it isn't) and the device shuts down.
I've done this several times and now the phone shuts off immediately when I power on. I can still get into HardSPL, but I just can't get the phone to power on and boot normally.
Does this sound like a hardware problem?
I've read a few other similar problems on here, none of which seemed to get resolved. I bought my Tilt from a private seller, so I have no warranty.
Thanks!
Ben in Dallas
Oh, and I haven't uploaded anything or switched ROMs or anything in months. This was a spontaneous occurance.
hello, i have got a problem with my kaiser, it is tuning off (entering in standby) in 10 s no matter the config than i make
thanks a lot
Oddly enough, I'm having exactly the same problem.
No matter what is running, even apps that are supposed to keep the device from entering sleep (like TomTom, etc.), it always enters sleep after about 10 seconds. What's weird too, is that if I press any physical button on the phone, it resumes from "Sleep" instead of having to push only the power button like you would normally do.
Any suggestions would be appreciated, I have a "AT&T Tilt" Kaiser, and am running a 6.5 rom w/ the eMobile radio.
Hello bro
i found a semi-solution hehehe
starting de audio manager and let it play a part of a music, after that it dont solve all problem but reduce it, some times the kaiser turn off after 2 min as the setting, some times it turn off in 10s
the most strange thing is than the pda never have this problem until today in morning
my rom is a pda-corner wm6,1
thanks
Don't know if it the same problem...
Hi guys got a kaiser bout a month ago and i love the phone haven't done any modifications to it all stock at&t stuff. Having a pretty unpleasant problem... when i go to turn on the phone the at&t logo pops up and then after a couple of seconds turns off, the battery is charged! I seem to be able to turn it on if i open the sim card door and leave it open till the WM6.1 logo appears, but then when i turn it off to put in sim card it turns off in seconds and does not come on. Now when it does happen to stay on for me after its been asleep for a while the touch screen stops working...
all stock kaiser
have done may hard and soft resets nothing seems to be working
don't have sync software
willing to do anything
HELP!!!
maybe you can put a modificated rom, my sotck phone come with wi-fi, internet and e-mail blocked. i put a modificated rom and it unlock all features. its just a try, but dont forget to read all the wiki about the replacement of the rom or you can brick you phone
good luck
i'm also looking for how to change this as tomtom on the move in the car is useless when the phone locks
Hey.
My Diamond seems to be dead. Yesterday and this morning it seemed to be working just fine. Then it begin taking a lot of time to get the screen on and now the phone won't turn on at all.
When I plug in the charger, now, there is no light going around the d-pad, as usual.. The computer didn't even detect any new hardware when I connected it..
When I press the soft reset button nothing happens. I tried booting it to the tricolour screen, but as it doesn't even want to turn on it was to no avail..
Is there any way to repair it without having to send it to an HTC repair centre? 'Cause I'm afraid that is not option..
Or am I ****ed?
Have you tried pulling out the battery and leaving it for about 30 seconds then put it back in?
Yes. It still doesn't turn on.. ):