I've just purchased a diamond and am having a lot of different issues. The phone boots and starts ok but it reguarly locks up. Windows crashes reguarly and the touch screen stops working. You can control the phone from the bottom buttons but without turning it off and on again the screen wont work. The windows errors are to do with device.exe and gres.exe
Phone also wont connect to the network even though it is unlocked, have flashed it with 1.3 olli to see if that would fix it but i hasn't.
Phone randomly turns off and re-starts.
Does anyone have these kind of issues as the phone is unusable?
Send it back for a replacement, seems like the phone is faulty and i wouldnt try fixing it.
Related
So the phone (htc kaiser) is acting up. when the screen is slid and or tilted and then closed it sometimes shuts itself down. it just did it now while connected to the computer, then went into a reboot loop of going black, vibrating, showing the att splash screen, then going black, vibrating, showing the att splash screen in a loop about 6-8 times till i hit the soft reset button on the bottom.
whats been done to the phone:
updated to WM6.1
installed google maps
restored contacts which we backed up before update using sprite
installed slow ie scroll fix
installed kaiser tweak
installed youtube player (tubeplayer or something)
installed tmpc (tpmc?) (doesnt work for some reason)
i've checked all the power settings i could find, it should not be turning itself off automatically in any way. phone has NOT been dropped at all or handled rough.
suggestions? hardware or software problem? shes blaming me for this issue because i'm the one who updated her to 6.1 I don't think theyre related.
more information
only happens with the phone is running on its battery.
internal harware problem?
So I had some water damage to my tilt. At first it would only boot to the tri-color screen after I dried it. Now it fully boots but when winmo opens it says that the sim door is unlocked and it will turn off in 10 seconds. htc home is running in the background, and sometimes, for a few seconds it connects to activesync, then the phone turns off. I also noticed that it connects to winamp when the phone is off and just plugged into the usb.
I'd like to think that reloading the ROM would fix this. Is there a different way to load ROMS? Does anyone have any ideas on how to fix this? I would appreciate any advice. I wouldnt mind waiting for the FUZE but need a phone till then.
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
rmorera84 said:
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
Click to expand...
Click to collapse
what did you do *before* your diamond stopped turning on?? unless you had a completely unpredicted system meltdown of your diamond for injecting it with super high voltage. it is rare for it to not power off unless you did something ... so please elaborate so we can assist better.
Ok, yesterday i use the phone like anothe normal day, in the night i turn off the phone, and in the morning, when i tried to turn on, i have this problem, for example, when a tried to do a soft, hard reset, the screen is in black, when a conect the phone to the usb the screen is black, is, i left the phone alone, in 3 minutes the black screen again, i don´t know why.
any LED activity when plugged into USB?
I think it is a major manufacture problem
I had the same problem, taking out the battery waiting a while and inserting it back, will solve the problem for some time but it will happen again.
Finally I sent it to the HTC support center.
I don't understand why HTC didn't recall.
If you'll search this forum you'll see the same problem in different stages, some times it's a blank screen but the phone will ring and some are just freeze.
Hi, I've had my Diamond for about a month soon and it started earlier this week by not wanting to come on at all. Been taking out the battery for a few days but eventually got fed up and did a hardware reset tonight. Not long after that it just suddenly turned itself off and I couldn't get it back on again. I thought I'd pack it back into the box it came in and send it back tomorrow and took out the sim card. After that it came to life again.
Happened to get a call after that and that call was suddenly disconnected without any reason.
So I am not very happy with this phone at the moment. Would appreciate any advice or if you know for sure it can't be sorted maybe I should send it back and ask for another one?
Blazeitup123 said:
any LED activity when plugged into USB?
Click to expand...
Click to collapse
Nothing, but one time the pc detect the phone, but later nothing.
No Led activity either on mine when it went dead.
When the Phone goes dead, try cooling the phone down as much as possible, and try starting it up again.....
There is a problem with the HTC Diamond in that it can cook itself (excessive heat), due to the auto over temp function crashing and not switching off the phone..... (That's what I have been told at least...)
I know over around 5 Diamonds so far that have had this issue, where the symptoms slowly get worse...
Have a look at this thread....
http://forum.xda-developers.com/showthread.php?p=2905775#post2905775
PLEASE P.M. me if you have any of the symptoms described in the thread...
I have been TRYING to get my Diamond fixed under warranty now for 2 months with little success... And I kinda need to know how wide spread this problem is to proceed any further.
could not turn on after blank screen ...
Hello,
I've had the same issue as rmorera, and after I hard reseted the phone all went o.k.. BUT after I reinstalled part of the small apps I use, the phone started to go off again. So, the problem seems to be in the software ...
I believe the cause might be the SRS WOW which I use. I installed the .cab, then the .reg file provided (ufortunatelly I don't remember from which thread I got the files ...). And shortly after, the phone stopped working. I uninstalled the software, and now it works! Could it be that the SRS WoW did this?
I tried to reinstall the SRS WoW and I found that if enabled for "Internal (Stereo)" instead of "Headphones" it gets my phone shut when the WM blanks the screen. If I select the "Headphones" options the issue seems to disappear.
Still, the SRS WoW damages the volume buttons action, but I think this issue is on another thread ...
Few hours ago i unlock my phone, there was a problem with radio rom, and my friend recommend to install Kaiser HyperDragon III_WWE version of WM6.1.
I install it, play 5-6 minutes and after this check some delay problem. I make soft restart and after this phone touch screen don't work.
Touch don't response. Made hard restart ... and it's the last think that i did.
At startup i check this "tap the screen to setup your windows devices ....", but as touch screen don't response .. i don't have any progress.
Try to resintall the same WIN6.1 version, but no changes.
Any advice? what's the problem.
Is there any way to fix it ?
sounds like a hardware problem. Most likely the wiring is bad or corroded. You'll need a new screen or you might be able to fix the wiring. I kind've don't like the fact that our kaisers vibrate at startup because you think it would eventually rattle something loose which may have happened in your case. Before getting a new screen though, load a new ROM. To do it without activesync enter the bootloader mode by pressing down the camera and power button at the same time while the phone is off. Then connect your phone and it should say USB after a few minutes. Then flash
http://forum.xda-developers.com/showthread.php?t=485288
Please Read This Thread...
Because I had almost same problem like your's...
Try the install HardSPL...
Greetings,
I'm not experienced with android devices, so i thought i'd ask here first before trying to do anything.
Since a few months ago some weird things started happening to my X8 - random display glitches and blackouts at completely random intervals (sometimes one or even two a day, sometimes it can last two or more weeks w/o an incident, i haven't figured out any relation yet).
Glitches manifest in distorted view on screen - shifted up/down/sideways - or colored graphics artefacts - up to completely bizarre patterns of random-colored pixels covering the whole screen. Weirdly enough, pushing power button as if to lock the screen usually alleviates the issue, sometimes i need to do it few times to remove completely, but it works. Touchscreen works fine, but i need to tap the "right" spot on the screen, not where it's displayed on the screen ("right" as in where the element is when the screen is not glitching).
The other issue (may be related) i'm having with the phone is random screen "blackouts" - the screen goes completely black and the power button cycling doesn't help - but the phone still reacts to screen input (i.e. i can unlock the screen by dragging the slider, launch app, start/stop music playback and so on). I can see the backlight on, so it's definitely screen/gfx hardware issue, not backlight. If i try to reboot the phone, it hangs on either shutdown or boot up. Removing the battery, placing it back and booting the phone up doesn't help - it vibrates as usual, i see the backlight go up, but screen stays black and i can't interact with the phone even if i leave it there for a few minutes (which is more than enough for it to boot up - it usually takes ~30 seconds till full boot). Also the backlight won't go off. It usually helps to boot normally if i hit the phone with a palm on the back side and/or leave it alone for a while. This issue is much more rare (only had it three times), but it puts the phone out of service for a while, so it's an issue for me.
Now, the device info:
Sony Ericsson Xperia X8 E15i
015 baseband
10W44
Unlocked bootloader
Alfs8 kernel (2.6.29.6-Alfs v08a 24/03/2012)
GingerDX v026 ROM
No cpu tweaks done, cpu governor "ONDEMAND", cpu speeds 122-600.
The glitches started when i was still using the older version, GindgerDX v013 with locked bootloader, i have done factory reset and flashed a new version with new kernel (and unlocked the loader along the way), but apparently it did not help fix the issues.
I can't provide and screenshots/photos of the issue because the only camera i have access to at most times when it happens is my phone one and, obviously, i can't use that in this case
The question is: can i still try to fix it by myself (i can do it if it doesn't involve disassembling the phone completely - i don't have the screwdrivers required) by software tweaks or other techniques or should i reflash stock kernel/rom, apply for warranty and hope they find the defect and fix it? I really do like the phone. Or, maybe, you have encountered anything resembling these issues and may shed some light on what's happening.
Appreciate any input in trying to figure out and fix this.
Thank you if you have read all this even if you can't help me, cheers!
1st problem could be 'Screen Cut' issue which is solved using kernel without FPS Cap...
2nd problem usually happens on my phone with miniCM9 3.0.2 but shows splash and boot animation...
Can you see the splash screen and the bootanimation? Because my friends' Xperia Ray has the issue on official firmware... so it could be hardware damage...
Try unlocking the screen then press the power button then press it again...
and also try flashing the stock firmware... If it doesn't work... I think you should live with it...
Sounds like a hardware problem to me. Reflash stock kernel and ROM and full wipe and then flash a different ROM and see it it still happens. If it does I think it is advisable to send it to Sony for repair.
Sent from my E15i using Tapatalk 2
Thanks for your replies, i'll try reflashing the stock rom and see if it still happens.
@Lily48: no, no splashcreen or boot animation, just black screen and visible backlight.
I have the same problem and I checked it many times and my conclusion is....ITS A HARDWARE PROBLEM NOT SOFTWARE..
KASHYAP9 said:
I have the same problem and I checked it many times and my conclusion is....ITS A HARDWARE PROBLEM NOT SOFTWARE..
Click to expand...
Click to collapse
Well, notify me if you find a solution, thanks
Sorry for double post, but this is important update:
My phone died this morning with the permanent black screen syndrome. Until i rebooted i could use it to receive phone calls or even listen to music (i knew where to touch to activate the features). However it would not boot sompletely after restart, even if i leave it for ~hour. Connecting to flashtool showed that it does boot to a certain stage, but no GUI (for user interaction with haptic feedback) available - the flashtool does show that device connected with usb debugging enabled.
I reflashed the stock ROM, now it's apparently stuck in some sort of bootloop - it keeps on connecting and disconnecting. But the screen is still black, with backlight. If i remove the battery, replace it and just connect to pc w/o trying to boot on, it acts normally as if trying to charge - backlight activates for a few seconds if i touch a key and green led is lit, but still the screen is black.
I will RMA it tomorrow, thanks for help, hopefully i'll get a new one, or they'll repair this one so it does not glitch on me again. Anyway it was/is a good phone, i absolutely love it.
Wish me luck =]
Aessaya said:
Sorry for double post, but this is important update:
My phone died this morning with the permanent black screen syndrome. Until i rebooted i could use it to receive phone calls or even listen to music (i knew where to touch to activate the features). However it would not boot sompletely after restart, even if i leave it for ~hour. Connecting to flashtool showed that it does boot to a certain stage, but no GUI (for user interaction with haptic feedback) available - the flashtool does show that device connected with usb debugging enabled.
I reflashed the stock ROM, now it's apparently stuck in some sort of bootloop - it keeps on connecting and disconnecting. But the screen is still black, with backlight. If i remove the battery, replace it and just connect to pc w/o trying to boot on, it acts normally as if trying to charge - backlight activates for a few seconds if i touch a key and green led is lit, but still the screen is black.
I will RMA it tomorrow, thanks for help, hopefully i'll get a new one, or they'll repair this one so it does not glitch on me again. Anyway it was/is a good phone, i absolutely love it.
Wish me luck =]
Click to expand...
Click to collapse
It is a hardware problem and Sony Service Center is the last option you have.. if your X8 is in warranty period.
I did the same and they replaced its display with new one.
Hello, reporting back in:
Just got my X8 back, it really was a hardware problem. They changed the screen now it works as good as new =]
Thanks everyone for support