Phone reboots when screen slid - Tilt, TyTN II, MDA Vario III General

So the phone (htc kaiser) is acting up. when the screen is slid and or tilted and then closed it sometimes shuts itself down. it just did it now while connected to the computer, then went into a reboot loop of going black, vibrating, showing the att splash screen, then going black, vibrating, showing the att splash screen in a loop about 6-8 times till i hit the soft reset button on the bottom.
whats been done to the phone:
updated to WM6.1
installed google maps
restored contacts which we backed up before update using sprite
installed slow ie scroll fix
installed kaiser tweak
installed youtube player (tubeplayer or something)
installed tmpc (tpmc?) (doesnt work for some reason)
i've checked all the power settings i could find, it should not be turning itself off automatically in any way. phone has NOT been dropped at all or handled rough.
suggestions? hardware or software problem? shes blaming me for this issue because i'm the one who updated her to 6.1 I don't think theyre related.

more information
only happens with the phone is running on its battery.
internal harware problem?

Related

problem with diamond

I've just purchased a diamond and am having a lot of different issues. The phone boots and starts ok but it reguarly locks up. Windows crashes reguarly and the touch screen stops working. You can control the phone from the bottom buttons but without turning it off and on again the screen wont work. The windows errors are to do with device.exe and gres.exe
Phone also wont connect to the network even though it is unlocked, have flashed it with 1.3 olli to see if that would fix it but i hasn't.
Phone randomly turns off and re-starts.
Does anyone have these kind of issues as the phone is unusable?
Send it back for a replacement, seems like the phone is faulty and i wouldnt try fixing it.

HELP! Tilt is STUCK

So I had some water damage to my tilt. At first it would only boot to the tri-color screen after I dried it. Now it fully boots but when winmo opens it says that the sim door is unlocked and it will turn off in 10 seconds. htc home is running in the background, and sometimes, for a few seconds it connects to activesync, then the phone turns off. I also noticed that it connects to winamp when the phone is off and just plugged into the usb.
I'd like to think that reloading the ROM would fix this. Is there a different way to load ROMS? Does anyone have any ideas on how to fix this? I would appreciate any advice. I wouldnt mind waiting for the FUZE but need a phone till then.

Problem with phone on standby

So I Wiped Then Flashed from CyangenMod 3.6.8.1 to 3.9.7 And went fast and smooth boot slow but expected due to flash .... apps still fully functioned except for power manager full it was force closed at start so uninstalled app and re-installed app ran perfectly fine..... all other process that I had done seem to be working flawlessly ....my main issue as of this moment is something I havent seen before....its when my phone is on standby at this point if my phone is closed and I hit home or menu my screen does not turn on but I can here my selections and my buttons light up so I have to slide my phone open then place it back into standby using power button to then hit home or menu so that my screen turns on .... this is the same to turn on phone if its closed screen is just a black light screen so it must be slid open to see anything on the screen such as the T-mobile G1 bootloader etc.......
anyone know what maybe the problem here?
I can provide a device log to anyone that maybe able to assit me
bump so no one has anyclue as to away to attempt to fix this issue? The problem is that the screen only comes on if I slide the phone open but when slid closed hiting menu or home the display does not come on but you can tell that the phone thinks its on due to the fact and can here my desktop shortcuts click as if I was switching from 1 to another ......... anyone?

Diamond does not Power On

Hi i have a few issues on my diamond. I hope you guys could help..
1st issue: lately my diamond keeps on resetting by itself.
2nd issue: later I've learned that when I record my voice using the software within the ROM, I don't hear anything but when I record my voice using my htc headset/earphones there is a sound.
What I did was:
This day I've flashed a new rom (Energy Rom) into my Diamond. It works ok then I flashed the Radio (Radio_1.13.25.24). I was able to use my diamond for a few hours.
Now..
3rd issue: My diamond is not powering on..
What i did before this happened was...
I pressed and hold the power button for about a few seconds so the ShutXP would pop up and I could soft reset my diamond.Before I clicked the soft reset button, I was checking out all the functions of it. then i clicked, a little icon,which is the Setup Timer Action. Here's the setup:
Action: Turn Off Pocket PC
In: (i don't exactly have seen the time indicated)
As curious as i am, I Clicked the Set Action button. It did shut my diamond off. Then I tried turning it on, but all it was doing was vibrate and the screen was black. At first I was hearing the start up sound a few times but later it didn't hear it anymore. I plugged in the charger but there's no white light on the circle button which used to have a light on the borders of the circle button when plugged in the usb cable. I tried pressing the power button plus the Volume down so the bootloader would appear but it did not. What shall I do?
Are you sure that the screen working because the phone vibrate and play the startup sound so if think its the screen that have som serious problem !!
HELP
I also flashed a new rom (Energy Rom) into my Diamond before.
It cannot run window mobile6.5.........how can I do???
I cannot connect to PC .......
I recently also had a similiar problem, after attempting a flash of the Rom, the ROM update stopped halfway through and reported that it had lost connection to the device....
The whole phone would not vibrate/power on, nothing - no glowing ring around the middle button to indicate it charging at all.
I had to return to the repair centre and somehow they didn't notice that I had modified the firmware and replaced the whole phone for free citing a hardware issue ...
Doesnt sound good if you cannot hard reset the device

Strange (and a little worriesome) behavior on my G1

Tonight my G1 displayed some very odd behavior. It was running normally and I pressed the power button to make it sleep and I set it aside. About half an hour later I picked it up and tried to turn it on by pressing menu. The phone gave no response other than lighting up the five buttons on the bottom. I tried sliding the keyboard out and the keyboard lit up as well, but the display remained black. Plugging it in via USB to my computer did absolutely nothing (no sounds, no notification light, etc.), and I got the same result when I plugged it into the charger. I finally decided to take the battery out in order to turn the phone off, and then put it back in and pressed the power button. The phone booted up normally, and now everything seems to be working in proper order. I am slightly concerned, however, as I have never had this behavior in the year that I have owned my G1. I am running Cyanogen 4.1.999 with the Hard SPL boot loader. I am unsure whether this behavior has anything to do with the mod and I am wondering if anyone else has experienced anything similar. I do realize that if my phone is bricked it is my fault, and I want to determine if this was simply a freak accident or if I need to do something differently with the phone.
first of all if your phone was bricked you wouldn't be able to use it. as for your problem it doesnt sound too serious so if i were you i wouldn't worry about it. but if it does happen again reflash your phone and if it happens after that, pitch it to cyanogen to see if there is a problem with the rom.
I do realize that it isn't bricked now, but I am worried that this behavior could mean that I am pushing the phone too hard. I am mostly curious as to whether or not anyone else has experienced similar behavior from their G1.
Turn off compatibility mode in spare parts.
don't worry this is a common problen It happens to me all the time any hero I flash plays nice for about a day. and then boom no problems with cyan!
I had the same problem, but unfortunately my G1 is still not working properly.
In the morning, turning off the alarm I left the phone for 5 minutes. An attempt to turn it on did not work: there was no reaction on display, although the buttons were lighting up. I restarted phone taking the battery out and now I have following:
- keyboard fully closed: no reaction/black display, buttons are lighted up
- keyboard open: I can do everything: change ROM/make call/write messages/Internet/GPS/... - everything what is possible to do with rooted G1
- keyboard partially open (visible only lowest row with such buttons as ALT, SHIFT, SPACE): similar to 'open' but with changed orientation
Can anyone help/advise? Did almost everything: ROM changed, full wipe, recovery

Categories

Resources