All,
I was wondering if the built in WM6 Voip client can be activated or be put in if it does not yet exist in the WM6 builds.....
Currently I use Fring for my Voip calls, but I would really like to use the built in client for better native support.
Other WM Voip clients are also welcome....
Cheers,
HJ
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi Mrabie,
Are you still using VOIP? Please confirm if it used the standard dial pad and if it also uses the front speaker?
Cheers!
There's nothing for the Kaiser that uses the front speaker yet.
Do we know what this is? I assume you mean Voice Over IP (WM6 Built in) currently uses the loud speaker.
One would assume the normal phone speaker could be used (since my old Hermes could).
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Same here, works excellent!
has anyone managed to get the native voip client to work on the kaiser?
I can receive a call but not make one.
when trying to make a call ; I get the error "Network service is not available. Try again later."
sometimes it has worked....
Was working perfectly fine on my hermes (imate jasjam)
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Great!
I have loaded the 2 cabs and have made some minor progress.
If i reboot the Tytn II is says connected for a moment then it goes to 'searching'. This is over the home wifi network.
When i first loaded the cabs and tried to initiate a call, it did show my voip provider in the dial pad, but now i cant replicate that to test it actually works.
What should i do?
Cheers
Edit: it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
GLO said:
it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
Click to expand...
Click to collapse
tap on the name , it needs to show as "selected".
let us know if it works for you.
I can only receive calls.
interestingly, nothing ever arrive on the voip server when i try to make a call; i run my own voip server (asterisk) , and no packet ever make it to the server from the windows mobile device...
warning, numbers must be numeric only, no + or # etc...
Do you mean to select it from the 'Today screen'
If that is what you mean, then when i click on it it takes me to the phone settings tab for internet calling.
Mind you, in that tab it states:
Internet Calling
To set the calling network for your next call, select BBPglobal (my Voip account) on the Today screen.
options: whenever available
Only if cellular is not available
Never
I have it set to whenever available and have also enabled GRS/GSM calls as per SIP config 2.01.
Whilst it now always shows that it is available, i dont see how else i can select it.
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
jyavenard said:
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
Click to expand...
Click to collapse
I move the today screen curser to highlight the voip plugin, but nothing happens when i hit OK or press the big silver button in the middle.
Regarding the SIP server sip2.BBPglobal.com does support g711. Well i was thinking that the phone simply makes a connection to the wireless router (Asus WL500gP running DD-WRT v23sp2) and that would be it. I could be wrong but i think this way simply because i replicated the SIP settings from my ATA (Linksys SPA2102).
Plus i would imaging that when using the VOIP over 3G that it connects with the same settings from the SipConfigTool1.02
Have i missed the boat somehow?
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Would be also interresting for me.
I've tested 3 Types of VOIP software.
- Fring => Comes out of the loudspeaker
- Pocket Talk => Comes out of the loudspeaker
- Prop. WM6 => Could not connect.
Kind Regards
Seppl
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi,
the first link is about Hermes?! I tried it, but it creates two today plugin...why?!
Is it possible that on the latest Kaiser native ROM some parts of WM&VoIP.CAP is already installed even if there is no Internet Tab under Pgone Settings?
Second: I had universal befor and a cooked rom, and when I clicked on the today plugin I could select or unselect voip for calling. With this cab instead, if I click on the today plugin, I enter into Start->Settings->Phone->Internet.
Third: I looked at ftp://ftp.xda-developers.com/Kaiser/VoIP/ and there is a SleuthKaiserVoIP.cab...what is it?? Maybe the WM6VoIP.cab versio for Kaiser?
monakh said:
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
Click to expand...
Click to collapse
I get the same problem using PocketTalk!
Stefano
snyfer said:
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Click to expand...
Click to collapse
How many versions are there?
Codec ???
What codecs are supported by the built in VOIP? Maybe the issue of not able to make a call could be codec related like in any other VOIP softwares.
- TKN
I installed skype and it runs fine, but i can't figure out why it uses my speakphone when i am talkin to someone using skype, is it a way that i can change it ??? THANKS!
Do a search!
There is no way for Skype to play through the headset. WM5/6 issue.
Well at least that is how the OS was designed. There is a piece of software called BTAudio I believe that will let you do it.
Try this thread:
http://forum.xda-developers.com/showthread.php?t=330074&page=3&highlight=btaudio
This might also work:
http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
All being well I should be getting a HTC touch Diamond tomorrow.
Is there any support for SIP or do you know of a decent SIP Client ?
Ideally I'd like to link to sipgate and/or a SIP astrix server
Thanks
Try fring (www.fring.com). Works on my Diamond. Easy to install. Quality of sound is not to good though.
sjphone mybe better..
Thanks..
Can you point me to the coreect download for sjphone ??
Will this work with the earpeice ??
Here's Jonny said:
Thanks..
Can you point me to the coreect download for sjphone ??
Will this work with the earpeice ??
Click to expand...
Click to collapse
Try is there
_http://www.sjphone.org/preview/SJphone-1.60-WindowsCE(preview)/
On my Artemis, fring sounded better than sjphone
Is the sound still coming out of the speaker or is it working on the ear piece for fring... i really hope it is solved...
On my Diamond and polish provider SpeaQ works great - it opens and login to the sip network within 1-2 seconds Try search, cab is somewhere in the forum - I have downloaded it from reqall company site, but now it is no longer there
So lots of chefs are cooking skype into their roms these days, and I was wondering if I could point out something that might help all of us.
See the big problem with skype for windows mobile, as noted by many other people on XDA, is that when in a call it plays the other person over the speakerphone as opposed to the earpiece. For other phones they have a workaround called audioroute, but for the xperia we get a nicer solution: Sony's Skype panel.
The Skype panel works perfectly without any modification as opposed to the annoying speakerphone junk of the regular skype app.
So unless there is something i'm missing, if the rom you are cooking is panel enabled, how about the skype panel instead of the skype mobile app
The skype panel version is simply a Skype app (with earpiece output support) + panel. So, you can still use the panel version without panel by calling the app directly.
jackleung said:
The skype panel version is simply a Skype app (with earpiece output support) + panel. So, you can still use the panel version without panel by calling the app directly.
Click to expand...
Click to collapse
I was hoping that was possible, but a few of the last roms I used that had skype installed skype still used the speaker. Is there a .cab that exists anywhere with the special xperia earpiece fixed version of skype that doesnt install the panel?
narcotichobo said:
I was hoping that was possible, but a few of the last roms I used that had skype installed skype still used the speaker. Is there a .cab that exists anywhere with the special xperia earpiece fixed version of skype that doesnt install the panel?
Click to expand...
Click to collapse
skype panel app fixed all things
but u can search a patch from xda forum for generic skype ...
Does Skype Mobile for Xperia have file transfer? (Skype 3.0 got it, tho).
But the Skype Mobile for Xperia version is just so much better with the correct audiorouting. I really wonder, why people are cooking ROMs for Xperia without the special Skype Xperia app.
Hey,
Just put the newest version of xdandriod TOPAZ on my HTC pure and it works perfectly except that if someone calls me it won't have a ringtone (vibrate works fine however).
Is there a way to fix this problem?
The only alteration I've made is changing CDMA='1' to CDMA='0' in the Startup.txt
Cheers
there is no way to fix it yet
lets wait
Try RingoPro app...it may fix this
Tried ringopro 1.2.28 and it didn't help.
zooster said:
Tried ringopro 1.2.28 and it didn't help.
Click to expand...
Click to collapse
this was soooo clear, as this tool doesn't do anything about the "broken" sounddriver.
I hope you didn't spend money on it
Hehehe
I tried the free ringo and it did nothing.
Looks like it's a matter of waiting until it gets resolved!
There is no app that will enable sound ( ext. speaker ) because its a primary kernel issue.