All,
I was wondering if the built in WM6 Voip client can be activated or be put in if it does not yet exist in the WM6 builds.....
Currently I use Fring for my Voip calls, but I would really like to use the built in client for better native support.
Other WM Voip clients are also welcome....
Cheers,
HJ
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi Mrabie,
Are you still using VOIP? Please confirm if it used the standard dial pad and if it also uses the front speaker?
Cheers!
There's nothing for the Kaiser that uses the front speaker yet.
Do we know what this is? I assume you mean Voice Over IP (WM6 Built in) currently uses the loud speaker.
One would assume the normal phone speaker could be used (since my old Hermes could).
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Same here, works excellent!
has anyone managed to get the native voip client to work on the kaiser?
I can receive a call but not make one.
when trying to make a call ; I get the error "Network service is not available. Try again later."
sometimes it has worked....
Was working perfectly fine on my hermes (imate jasjam)
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Great!
I have loaded the 2 cabs and have made some minor progress.
If i reboot the Tytn II is says connected for a moment then it goes to 'searching'. This is over the home wifi network.
When i first loaded the cabs and tried to initiate a call, it did show my voip provider in the dial pad, but now i cant replicate that to test it actually works.
What should i do?
Cheers
Edit: it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
GLO said:
it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
Click to expand...
Click to collapse
tap on the name , it needs to show as "selected".
let us know if it works for you.
I can only receive calls.
interestingly, nothing ever arrive on the voip server when i try to make a call; i run my own voip server (asterisk) , and no packet ever make it to the server from the windows mobile device...
warning, numbers must be numeric only, no + or # etc...
Do you mean to select it from the 'Today screen'
If that is what you mean, then when i click on it it takes me to the phone settings tab for internet calling.
Mind you, in that tab it states:
Internet Calling
To set the calling network for your next call, select BBPglobal (my Voip account) on the Today screen.
options: whenever available
Only if cellular is not available
Never
I have it set to whenever available and have also enabled GRS/GSM calls as per SIP config 2.01.
Whilst it now always shows that it is available, i dont see how else i can select it.
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
jyavenard said:
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
Click to expand...
Click to collapse
I move the today screen curser to highlight the voip plugin, but nothing happens when i hit OK or press the big silver button in the middle.
Regarding the SIP server sip2.BBPglobal.com does support g711. Well i was thinking that the phone simply makes a connection to the wireless router (Asus WL500gP running DD-WRT v23sp2) and that would be it. I could be wrong but i think this way simply because i replicated the SIP settings from my ATA (Linksys SPA2102).
Plus i would imaging that when using the VOIP over 3G that it connects with the same settings from the SipConfigTool1.02
Have i missed the boat somehow?
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Would be also interresting for me.
I've tested 3 Types of VOIP software.
- Fring => Comes out of the loudspeaker
- Pocket Talk => Comes out of the loudspeaker
- Prop. WM6 => Could not connect.
Kind Regards
Seppl
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi,
the first link is about Hermes?! I tried it, but it creates two today plugin...why?!
Is it possible that on the latest Kaiser native ROM some parts of WM&VoIP.CAP is already installed even if there is no Internet Tab under Pgone Settings?
Second: I had universal befor and a cooked rom, and when I clicked on the today plugin I could select or unselect voip for calling. With this cab instead, if I click on the today plugin, I enter into Start->Settings->Phone->Internet.
Third: I looked at ftp://ftp.xda-developers.com/Kaiser/VoIP/ and there is a SleuthKaiserVoIP.cab...what is it?? Maybe the WM6VoIP.cab versio for Kaiser?
monakh said:
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
Click to expand...
Click to collapse
I get the same problem using PocketTalk!
Stefano
snyfer said:
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Click to expand...
Click to collapse
How many versions are there?
Codec ???
What codecs are supported by the built in VOIP? Maybe the issue of not able to make a call could be codec related like in any other VOIP softwares.
- TKN
Hi guys!
Is there a working H.323 client that works with Kaiser?
I would like to connect to company's PBX, and damn /// still support only H.323, not SIP in this sw version.
Netmeeting is working fine on my laptop, so I hope to find something for the Kaiser as well.
Thanks,
T.
Bumping the post
Anyone?
T.
thomek said:
Anyone?
T.
Click to expand...
Click to collapse
Not really seen anything specific but this may whet your whistle!!!
http://www.engadget.com/2007/11/12/windows-ce-6-0-r2-to-support-videoconferencing/
Windows CE is the base core of our system so it all filters down.
Thanks mate, but I hope of finding something sooner than the new M$ release of operating system and video conferencing. All I would really like to see is plain VoIP client that supports H.323 beside SIP.
I do know that Ericsson has developed clients that work with their PBXs using H.323 protocol, but they are developed for their smartphones using Symbian (P990, P1...)
T.
Not exactly sure what functionality you're after... but I thought Skype has conferencing features.. and it's free.
I don't know if you already looked on the internet for software, but I found this app: SJ Phone
More info is to be found on their site:
SJphone® is a VOIP softphone that allows you to speak with any other softphone running on a PC/PDA, any stand-alone IP-phone, or using Internet Telephony Service Provider (ITSP) with any traditional wired or mobile phone. It supports both SIP and H.323 standards and is fully inter-operable with most major VOIP vendors and ITSPs.
Click to expand...
Click to collapse
http://www.sjlabs.com/sjp.html
I haven't used it, so I can't confirm it works on the Kaiser. But I suggest you give it a try.
Good luck!
In case you are using Fring for VoIP call and want to use the BT Handfree handset, it does not work. I have logged a ticket to the Fring and here is the reply from them:
-------------------------------
Thank you for contacting our support team.
An option to route the calls to the earpiece or speakerphone is currently unavailable for WM handsets.
We are working hard on new versions for our application so please make sure you check our website regularly for updates.
Please feel free to contact us again, should you have any further queries.
Thank you,
Tom
fring Support
---------------------------------
Let's hope Fring can find a solution. Or if you have other program that can work with the handfree, please post it here.
Use BTAudio Toggle it should do the trick
I found the zip from this link:
http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1
It seeems to be pretty old. Does it work on WM6.1 on Diamond?
Hi,
I have just installed the latest skype on my kaiser and it is all working well, but can you not have video calls (through wifi) with the front camera i cant even see the other persons picture am i missing something or does it not support video?
Thanks
Jason
Correct, not supported.
Cheers
Does someone have an old .cab version of skype for my htc tytn II (2.2.0.38 or something like that I think)? Unfortunately I didn't keep the cab file...
The new version (2.5) is pretty much useless for me because it crashes instantly when making a phone call over wifi.
Thanks!
hi can you give me a skype download link?
www.skype.com ?
ye got 2 very old cabs here
SkypeForPocketPC.CAB
07/28/2008
and
SkypeForPocketPC_LowCPU.CAB
05/14/2006
I found a cab of the 2.2.0.18 version which works fine with my tytn. Thanks!
Inspector-Gadget said:
Does someone have an old .cab version of skype for my htc tytn II (2.2.0.38 or something like that I think)? Unfortunately I didn't keep the cab file...
The new version (2.5) is pretty much useless for me because it crashes instantly when making a phone call over wifi.
Thanks!
Click to expand...
Click to collapse
have you tried skype 3.0???? It works well with me without crashing, try it and maybe it would be better
www.skype.com would be good except that site is blocked here in UAE
anyone got a link or cab somewhere that works on tytn II (thats not on skype)
gazzacbr said:
www.skype.com would be good except that site is blocked here in UAE
anyone got a link or cab somewhere that works on tytn II (thats not on skype)
Click to expand...
Click to collapse
http://rapidshare.com/files/349576424/SkypeMobile.exe
But I'm not sure if it even works in UAE. Afaik they block the ports over there
Hi there.
I need some help in finding a reliable client for VOIP supporting any SIP provider and also G.729(a)(b)audio codecs.
A good app is SipDroid but does not have G.729 integrated.
Another alternative is VoIP SIP(Vippie) that have G.729 but the interface is featureless and you never know when your calls are through Sip or not. I tried and after 30 min I get my pay back because is an awful app.
I think the best approach is to buy the G.729 codec and to use it in any Sip application you might have it installed. Unfortunately I cannot not find how can an audio codec like G.729 can be bought under Android.
Is everybody that made already some steps in this direction ?
Thank you for the help.
Hope this will somehow help you
csipsimple has g729, should be better than sipdroid
http://code.google.com/p/csipsimple/downloads/list
Thank you for your useful post ! This is what I am looking for !!!
Awesome !!
ronlkh said:
Hope this will somehow help you
Click to expand...
Click to collapse
What can i use this??
Thanks