All,
I was wondering if the built in WM6 Voip client can be activated or be put in if it does not yet exist in the WM6 builds.....
Currently I use Fring for my Voip calls, but I would really like to use the built in client for better native support.
Other WM Voip clients are also welcome....
Cheers,
HJ
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi Mrabie,
Are you still using VOIP? Please confirm if it used the standard dial pad and if it also uses the front speaker?
Cheers!
There's nothing for the Kaiser that uses the front speaker yet.
Do we know what this is? I assume you mean Voice Over IP (WM6 Built in) currently uses the loud speaker.
One would assume the normal phone speaker could be used (since my old Hermes could).
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Same here, works excellent!
has anyone managed to get the native voip client to work on the kaiser?
I can receive a call but not make one.
when trying to make a call ; I get the error "Network service is not available. Try again later."
sometimes it has worked....
Was working perfectly fine on my hermes (imate jasjam)
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Great!
I have loaded the 2 cabs and have made some minor progress.
If i reboot the Tytn II is says connected for a moment then it goes to 'searching'. This is over the home wifi network.
When i first loaded the cabs and tried to initiate a call, it did show my voip provider in the dial pad, but now i cant replicate that to test it actually works.
What should i do?
Cheers
Edit: it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
GLO said:
it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
Click to expand...
Click to collapse
tap on the name , it needs to show as "selected".
let us know if it works for you.
I can only receive calls.
interestingly, nothing ever arrive on the voip server when i try to make a call; i run my own voip server (asterisk) , and no packet ever make it to the server from the windows mobile device...
warning, numbers must be numeric only, no + or # etc...
Do you mean to select it from the 'Today screen'
If that is what you mean, then when i click on it it takes me to the phone settings tab for internet calling.
Mind you, in that tab it states:
Internet Calling
To set the calling network for your next call, select BBPglobal (my Voip account) on the Today screen.
options: whenever available
Only if cellular is not available
Never
I have it set to whenever available and have also enabled GRS/GSM calls as per SIP config 2.01.
Whilst it now always shows that it is available, i dont see how else i can select it.
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
jyavenard said:
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
Click to expand...
Click to collapse
I move the today screen curser to highlight the voip plugin, but nothing happens when i hit OK or press the big silver button in the middle.
Regarding the SIP server sip2.BBPglobal.com does support g711. Well i was thinking that the phone simply makes a connection to the wireless router (Asus WL500gP running DD-WRT v23sp2) and that would be it. I could be wrong but i think this way simply because i replicated the SIP settings from my ATA (Linksys SPA2102).
Plus i would imaging that when using the VOIP over 3G that it connects with the same settings from the SipConfigTool1.02
Have i missed the boat somehow?
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Would be also interresting for me.
I've tested 3 Types of VOIP software.
- Fring => Comes out of the loudspeaker
- Pocket Talk => Comes out of the loudspeaker
- Prop. WM6 => Could not connect.
Kind Regards
Seppl
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi,
the first link is about Hermes?! I tried it, but it creates two today plugin...why?!
Is it possible that on the latest Kaiser native ROM some parts of WM&VoIP.CAP is already installed even if there is no Internet Tab under Pgone Settings?
Second: I had universal befor and a cooked rom, and when I clicked on the today plugin I could select or unselect voip for calling. With this cab instead, if I click on the today plugin, I enter into Start->Settings->Phone->Internet.
Third: I looked at ftp://ftp.xda-developers.com/Kaiser/VoIP/ and there is a SleuthKaiserVoIP.cab...what is it?? Maybe the WM6VoIP.cab versio for Kaiser?
monakh said:
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
Click to expand...
Click to collapse
I get the same problem using PocketTalk!
Stefano
snyfer said:
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Click to expand...
Click to collapse
How many versions are there?
Codec ???
What codecs are supported by the built in VOIP? Maybe the issue of not able to make a call could be codec related like in any other VOIP softwares.
- TKN
Hi guys!
Is there a working H.323 client that works with Kaiser?
I would like to connect to company's PBX, and damn /// still support only H.323, not SIP in this sw version.
Netmeeting is working fine on my laptop, so I hope to find something for the Kaiser as well.
Thanks,
T.
Bumping the post
Anyone?
T.
thomek said:
Anyone?
T.
Click to expand...
Click to collapse
Not really seen anything specific but this may whet your whistle!!!
http://www.engadget.com/2007/11/12/windows-ce-6-0-r2-to-support-videoconferencing/
Windows CE is the base core of our system so it all filters down.
Thanks mate, but I hope of finding something sooner than the new M$ release of operating system and video conferencing. All I would really like to see is plain VoIP client that supports H.323 beside SIP.
I do know that Ericsson has developed clients that work with their PBXs using H.323 protocol, but they are developed for their smartphones using Symbian (P990, P1...)
T.
Not exactly sure what functionality you're after... but I thought Skype has conferencing features.. and it's free.
I don't know if you already looked on the internet for software, but I found this app: SJ Phone
More info is to be found on their site:
SJphone® is a VOIP softphone that allows you to speak with any other softphone running on a PC/PDA, any stand-alone IP-phone, or using Internet Telephony Service Provider (ITSP) with any traditional wired or mobile phone. It supports both SIP and H.323 standards and is fully inter-operable with most major VOIP vendors and ITSPs.
Click to expand...
Click to collapse
http://www.sjlabs.com/sjp.html
I haven't used it, so I can't confirm it works on the Kaiser. But I suggest you give it a try.
Good luck!
All being well I should be getting a HTC touch Diamond tomorrow.
Is there any support for SIP or do you know of a decent SIP Client ?
Ideally I'd like to link to sipgate and/or a SIP astrix server
Thanks
Try fring (www.fring.com). Works on my Diamond. Easy to install. Quality of sound is not to good though.
sjphone mybe better..
Thanks..
Can you point me to the coreect download for sjphone ??
Will this work with the earpeice ??
Here's Jonny said:
Thanks..
Can you point me to the coreect download for sjphone ??
Will this work with the earpeice ??
Click to expand...
Click to collapse
Try is there
_http://www.sjphone.org/preview/SJphone-1.60-WindowsCE(preview)/
On my Artemis, fring sounded better than sjphone
Is the sound still coming out of the speaker or is it working on the ear piece for fring... i really hope it is solved...
On my Diamond and polish provider SpeaQ works great - it opens and login to the sip network within 1-2 seconds Try search, cab is somewhere in the forum - I have downloaded it from reqall company site, but now it is no longer there
In case you are using Fring for VoIP call and want to use the BT Handfree handset, it does not work. I have logged a ticket to the Fring and here is the reply from them:
-------------------------------
Thank you for contacting our support team.
An option to route the calls to the earpiece or speakerphone is currently unavailable for WM handsets.
We are working hard on new versions for our application so please make sure you check our website regularly for updates.
Please feel free to contact us again, should you have any further queries.
Thank you,
Tom
fring Support
---------------------------------
Let's hope Fring can find a solution. Or if you have other program that can work with the handfree, please post it here.
Use BTAudio Toggle it should do the trick
I found the zip from this link:
http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1
It seeems to be pretty old. Does it work on WM6.1 on Diamond?
I am in need of a skype cab that would work with my tilt. I tried searching for it but couldnt find one that would install on the device. I would need one that supports the skype out function.
I would appreciate a link since i am only able to search and download from my phone in the curent location I am in.
Thanks
beeglej said:
I am in need of a skype cab that would work with my tilt. I tried searching for it but couldnt find one that would install on the device. I would need one that supports the skype out function.
I would appreciate a link since i am only able to search and download from my phone in the curent location I am in.
Thanks
Click to expand...
Click to collapse
As you may know skype will not longer support Windows Mobile and Windows Phone. I'm a heavy skype user and the service will be only supported to actual windows users just for the rest of this 2010.
FYI - here's the latest cab that skype released some months ago (this is the version that I personally use).
http://www.4shared.com/file/AJ1zu_TV/SkypeMobile.html
I hope that helps
I used fring on my Kaiser for skype support, might be worth looking at (link in my signature)
I use it on my Touch Pro as routes sound to telephone ear speaker.
Kaiser fring download: http://www.fring.com/download/proce...=HTC&mhandset_type=Tytn+2&email=Email+address
Happy I bumped into this, I am a fan of fring also, occasionally though I need to add a contact to skype or authorize a new contact. I haven't found a way to that with fring.
Thanks
Thanks for posting these replies.
I could not download the skype application with my phone. Rapid share wouldn't let me download it from my phone. And now has been downloaded too many times to try from a computer.
Fring worked great with skype the first day. But now has been blocked.
Any other ideas.
Jason
If I have an old Skype.cab file will it solve this problem?
Hello,
Please help, i'm looking for skype cab for my xda IIi.
Thanks
Caljay said:
Hello,
Please help, i'm looking for skype cab for my xda IIi.
Thanks
Click to expand...
Click to collapse
Have you read the posts above? There is a link for the cab and also there is one cab posted.
why even take the time to help people?