Database Develop

My charmer is Bricked, please help

I have a T-Mobile Compact II which has turned into a brick.
I Flashed the ROM with the HTC Touch ROM which run perfectly, no problems at all. Then i found a newer version of the same software, which Flashed the ROM (no problems encountered on the PC Screen) but when i come to hard reset the device it sticks at boot screen with the following
IPL 2.06
SPL 2.06.0000
GSM 02.19.21
OS 6.0.0.0
and will not go any further
I have tried the boot load (powering up with camera button pressed)
and get the following
IPL 2.06
SPL 2.06
USB
On the 3 colour screen.
i know the PC sees the device but cant get any communication to or from the device with active sync
Any ideas how to restore this fault.
Thanks Steve

Sorted
i have sorted my problem out. It turns out that i could not repair through a PC running Vista. Sorted on a XP machine

Bricked My Mda Compact 2
Last night I flashed my MDA Compact II with a ROM in this forum. It's from the thread: Tuning ROM 2.6.2.27 MDA CHARMER(MDA COMPACT II). The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 1.12
SPL 1.12.0000
OS 2.6.2.27
the i was told by a senior menber to flash it with BUTTON 1.05 (which i did)
and now BATTERY IS NOT CHARGING
and now i have
ipl 1.01
spl 1.12.000
gsm 01.12.10
os 1.5.4.2
NOW I HAVE REALISED THAT I HAVE USED ALL WIZARD FILES ON CHARMER WHICH IS THE ROOT CAUSE OF ABOVE MESS.
i have checked usb cable , main power charger with other pda and it was working ok , i have charged my battery on external charger.
MDA compact is not recognizes if battery
can it be a problem with registry ?
PLZ HELP

Please Help Me to Fix O2 Wizard

I have tried to upgade my O2 XDA Mini S (WIZARD) with Faria Crossbow 6 Rom.
It was loading fine till it hit 99% and got stuck there.
Now all i get after i soft reset it is three color screen and i have tried several times to run faria's rom it gets stuck at 99%.
How can I fix this. Can someone please help me
Please note: IPL & SPL are as follows
IPL 2.21.0001
SPL 2.21.0001
when I connect USB Cable it shows "USB" at the bottom of 3 color striped screen.
As I have tried to upgrade it to Faria Crossbow Mobile 6. I have tried to load Xda_MiniS_LaunchROM_v154102 but it gives me an error. I guess i have to down grade it to windows mobile 5 to run Xda_MiniS_LaunchROM_v154102. Which I dont know how can i do that with it being Stuck at 3 Striped color screen.
Your help is urgently needed.
Thx
Aamer Sheikh

Put it in the cradle, if activesync pops up, just cancel. Install an original rom to get it working first.

Charmer Help please!!!!!!!

Hi All, tried to updrade charmer to touch flo ver2.1 but had error that host disconnected, now will only boot to tmobile splash screen with this info (noticed os has changed but cant remember original) also tried soft and hard resets to no avail
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
I can also boot to the three colour screen and it recognises when the usb is plugged in but i cant seem to flash anything, i have tried a number of RUU but get different error messages, mostly that i need a newer upgrade tool or invalid vendor etc.
any help greatly appreciated

UPDATE: managed to flash this rom, (charmer_wm6_vlono_004.4) says all was ok but still stuck in tmobile boot screen??? info still the same
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
HELP!!!

UPDATE: Managed to load latest tmobile charmer rom RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship.exe
Will i be able to load touchflo 2.1 now?
cheers

i got the same problem and i fixed it^^
1. i started charmer in bootloader mode (press and hold power button while you reset with stylus)
2. i installed T-Mobile AKU 3.3 from handy-faq.de
3. i installed [vlodeck TouchFLO WM6 ver. 2.1]
works perfect^^

http://www.handy-faq.de/forum/htc_charmer_download_157/

Nokia 3650 said:
http://www.handy-faq.de/forum/htc_charmer_download_157/
Click to expand...
Click to collapse
oh yeah.. i forgot

I used a crude method of fully charging the battery. I downgraded to the default T-mobile ROM that came with the unit. After the flashing process, was complete, the unit rebooted (as it was supposed to), then switched itself off after showing the SPL/IPL data for about 3 seconds.
The battery, was fully charged in a universal charger. To get it to turn on again, I have to remove the battery for a few seconds. A hard reset, doesn't fix the problem. I can still enter the boot-loader though
I've tried all the various ROM files on this site, with no success. Any suggestions?

I've PMed you saying that you can try flashing WM5 prophet rom. It should work.

Thanks for the PM. Unfortunately, the propht ROM produces the same result.

Hi!
Help please!
My MDA compact II was died!
IPL 1.13
SPL 2.06.0000
GSM 01.15.20
OS 2.6.2.27
This is incorrect!
I don't know what is that?
I am in a mess!!!
Help please!

mine died too
when I try to install AKU 3.3 always at 80 % i get a 302 connection error

80 % ROM UPDATE connection-error

I tried to update the ROM of my T-Mobile MDA Compact II to the official T-Mobile AKU 3.3 but at 80% the loading indicator turnes red and a connection error (-302) occures.
The Device only shows the color screen with the IPL (3.08) and SPL (3.08)
HELP ME PLEASE

roflkatofl said:
I tried to update the ROM of my T-Mobile MDA Compact II to the official T-Mobile AKU 3.3 but at 80% the loading indicator turnes red and a connection error (-302) occures.
The Device only shows the color screen with the IPL (3.08) and SPL (3.08)
HELP ME PLEASE
Click to expand...
Click to collapse
I was facing same problem in my Dopod Solution 4 this is
1. Charge the Battery Full
2. Use original ROM to Flash the Phone
3. Check the Below Picture ..4 me this worked ...Hope it helps u

Charge your battery 100%

kaiser stuck on android no sound

hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets

RVerverda said:
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
Click to expand...
Click to collapse
You must SPL, do you have? 3.29 at least
you must have a radio newer than 1.70.X (use 1.70.18.02), didn't you read the thread "how to replace windows mobile with android" ?
If you can't update radio through the SD, use KaiserCustomRUU.exe: put it on a file wherever you want and put the radio you want also on the file and name it "RUU_signed.nbh". It's all on the threads man!
here's the SPL thread...http://forum.xda-developers.com/showthread.php?t=498320 USE THE SEARCH MAN!
no sound is because of no radio updated...