US Diamond Question - Touch Diamond, MDA Compact IV General

When the US Diamond comes out will you be able to user the 850/1800/1900 MHz to user 3G in the US by ROM update, or is it hardware change.
New to this, thank you in advance.

Related

2.26 ROM + Dutch MDA Vario Problem

Hi People,
I'm having some problems with my MDA Vario with upgraded 2.26 US ROM. Before my upgrade I never had this problem. With the new ROM I have.
My problem is that sometimes my phone losses connectivity with the GSM network. This would not be unusual if coverage in the area was bad or something like that.
But the matter of fact is that nowadays sometimes when someone call me the directly are forwarded to my voicemail. My phone doesn't respond at all, no missed calls or even the network coverage icon in the top of the Vario that usually gives dots if it looking for reception and network coverage. It's like it gets stuck or something, but only the GSM part. Because the PDA functionalities are working ok.
So in short MY MDA VARIO has good reception but still sometimes my phone doesn't ring at all and forwards every call to my voicemail and after some time I might get a sms/txt about a voicemail is some has left one behind.
I hope people who also have this issue might also have found out a solution for it. I have tried to search this forum but without any luck on this specific matter.
People who are in Holland and have also upgraded to 2.26 ROM are you having the same problem?? please let me know.
I might have to consider to downgrade my Vario to the UK ROM 2.23 I believe if this matter is unsolvable.
Thanks in advance everyone who will reply.
Cheers,
Shah
Shah2 said:
Hi People,
I'm having some problems with my MDA Vario with upgraded 2.26 US ROM. Before my upgrade I never had this problem. With the new ROM I have.
My problem is that sometimes my phone losses connectivity with the GSM network. This would not be unusual if coverage in the area was bad or something like that.
But the matter of fact is that nowadays sometimes when someone call me the directly are forwarded to my voicemail. My phone doesn't respond at all, no missed calls or even the network coverage icon in the top of the Vario that usually gives dots if it looking for reception and network coverage. It's like it gets stuck or something, but only the GSM part. Because the PDA functionalities are working ok.
So in short MY MDA VARIO has good reception but still sometimes my phone doesn't ring at all and forwards every call to my voicemail and after some time I might get a sms/txt about a voicemail is some has left one behind.
I hope people who also have this issue might also have found out a solution for it. I have tried to search this forum but without any luck on this specific matter.
People who are in Holland and have also upgraded to 2.26 ROM are you having the same problem?? please let me know.
I might have to consider to downgrade my Vario to the UK ROM 2.23 I believe if this matter is unsolvable.
Thanks in advance everyone who will reply.
Cheers,
Shah
Click to expand...
Click to collapse
Same here
I have the exact same problem, coincidentally (?) also with T-Mobile NL... See Explanation and Help - Please [2 Parts]
Some people blame it on GPRS: AKU2.3: GSM connection dropped while making voice calls
But I'm not buying that theory (yet), because I'm not running any GPRS apps, and to the best of my knowledge my phone will not automatically start GPRS connections if there's no app asking for it.... :?
Upto yesterday I was running this:
Operator: T-Mobile NL
Qtek 9100 G4
ROM: 2.24.10.1 WWE
Radio: 2.25.11
ExtROM: 2.24a Mr.Clean
In a desperate attempt (can you imagine the flaming you receive when your wife has tried to call you twice and only gets your voicemail :shock: ) I have now downgraded the Radio part only to the Qtek version 2.07.10 (which is the latest one they included with the Dutch version) taken from AKU 2 ROM 2.18.7.6 ExtROM 2.18.7.106 Radio 2.07.10 (you probably need to register to download this)
I have really no idea yet if this helps. The coming days will tell...
If anyone's interested to try this I can post the Radio ROM only (2.1 MB).
Cheers,
Marc
Hey Marc,
Did the Radio Rom update work for you? pls let me know. otherwise I'm going to downgrade to the UK version of the ROM for my vario.
Thanks,
Cheers,
Shah
Shah,
It's not conclusive yet. I haven't heard from anyone yet that I was unreachable, but then again: maybe they don't even bother to leave a voicemail anymore... :wink:
Marc
hey Marc,
I have downgraded my phone to the T-mobile UK official ROM as u might have seen in my signature. There is also a topic on radio only updates. http://forum.xda-developers.com/viewtopic.php?t=52952&highlight=
I'm not sure if I'm going to try this out on the US T-mobile 2.26 ROM just yet. Just to let u know I'm not having any problems with the UK rom. very strange. I might try to change the rom again in a couple of days. but will let u know what happens.
Cheers.
Shah
Shah,
so far I didn't have any problems after the downgrade of the radio. Maybe I'll try other ones later on, but for now I'll stick to this one.
Marc

Problem Text Messaging outside of my home!

Hello guys, i'm about to pull my hair out from frustration! I have an unlocked Tilt, on T-Mobile running on the HTC windows 6.1 Rom and for some reason i cannot send or receive text messages if i leave a good distance from my house!
Once i'm near my house by a block or so i'll receive and send text messages no problem, but there are patches around my town where i can't send or receive it. I tried switching my Sim card to an older phone and texting where i couldn't text on my Tilt, and the texts went through no problem, i just need to know if it's my phone or the carrier's fault. I plan on testing my Tilt and Wing in the same area's to see if that can shed some light, but i need help!
True2TheGame said:
Hello guys, i'm about to pull my hair out from frustration! I have an unlocked Tilt, on T-Mobile running on the HTC windows 6.1 Rom and for some reason i cannot send or receive text messages if i leave a good distance from my house!
Once i'm near my house by a block or so i'll receive and send text messages no problem, but there are patches around my town where i can't send or receive it. I tried switching my Sim card to an older phone and texting where i couldn't text on my Tilt, and the texts went through no problem, i just need to know if it's my phone or the carrier's fault. I plan on testing my Tilt and Wing in the same area's to see if that can shed some light, but i need help!
Click to expand...
Click to collapse
What's the reception like? You might try flashing a new radio, might give you better reception in some patches. What wm6.1 rom/radio are you using?
Currently my Rom Version is 3.03.405.0 WWE
Radio Version 1.64.06.04
I've tried countless rom's at first i thought it was because of windows 6.1 so i tried the HTC Windows 6.0 rom which didn't work either.
If you think i could use a better rom would you please let me know, i'm willing to do anything to fix this problem!
Thanks
i think it has nothing to do with a better rom...its just if the radio is fitting for the location u are at
True2TheGame said:
Currently my Rom Version is 3.03.405.0 WWE
Radio Version 1.64.06.04
I've tried countless rom's at first i thought it was because of windows 6.1 so i tried the HTC Windows 6.0 rom which didn't work either.
If you think i could use a better rom would you please let me know, i'm willing to do anything to fix this problem!
Thanks
Click to expand...
Click to collapse
I have several wm6.1 radios in the link in my signature. try them and see what you get. i am using the niki 1.58.16.27 radio. i like it the best, but it really depends on your location
thank you for your reply's i will try different radio's and see which one works best for me, thanks once again.
True2TheGame said:
thank you for your reply's i will try different radio's and see which one works best for me, thanks once again.
Click to expand...
Click to collapse
no problem man, that's what we're all here for.
One quick question about Radio's, are they just for signal strength? because i can make and receive calls just fine in areas, but no matter how strong my signal is i still can't send/receive text messages.
True2TheGame said:
One quick question about Radio's, are they just for signal strength? because i can make and receive calls just fine in areas, but no matter how strong my signal is i still can't send/receive text messages.
Click to expand...
Click to collapse
well i don't know for sure that changing the radio will make any difference but it might help. you're having that trouble just with the sms huh? and always only in those areas?
Yeah it seems touch and go, in some places it refuses to work, but in others, such as my home it works flawlessly. It even worked on the freeway on the way to Canada, and even in Canada on Roger's network. I tried calling T-Mobile and they thought it was weird how it works in some areas but not others.
True2TheGame said:
Yeah it seems touch and go, in some places it refuses to work, but in others, such as my home it works flawlessly. It even worked on the freeway on the way to Canada, and even in Canada on Roger's network. I tried calling T-Mobile and they thought it was weird how it works in some areas but not others.
Click to expand...
Click to collapse
that does seem very odd. hopefully the radio change helps, otherwise you'll have to find someone wiser than me to help you, or just chalk it up to a network glitch. good luck
True2TheGame said:
thank you for your reply's i will try different radio's and see which one works best for me, thanks once again.
Click to expand...
Click to collapse
Please make a follow-up post to let us know what your findings are. It's an interesting problem you're having, and your data could be very useful for this and other issues!
So far tried a number of different radios and still haven't fixed the problem, but i've singled out the problem as the Phone, as i tried texting in places where i couldn't with my Tilt, on 2 different phones, one being the Tmobile Wing and they went through with no problems.
I'm gonna try Dutty's 6.1 rom and see if that changes anything, i'm pretty much trying anything that works now.
True2TheGame said:
So far tried a number of different radios and still haven't fixed the problem, but i've singled out the problem as the Phone, as i tried texting in places where i couldn't with my Tilt, on 2 different phones, one being the Tmobile Wing and they went through with no problems.
I'm gonna try Dutty's 6.1 rom and see if that changes anything, i'm pretty much trying anything that works now.
Click to expand...
Click to collapse
So just to be clear, when you use an unlocked Tilt on T-Mobile's network, you have difficulty receiving text messages. But when you put your SIM into a T-Mobile phone (Wing), text messages come through fine? If I understood your posts correctly, and my summarization is accurate, then it sound to me as if the Tilt is having problems accessing data services when its roaming off T-Mobile's network.
I would make a note of 3-5 specific areas where you have problems with SMS (ie 300 Block of N Maple Ave), and then call T-Mobile and ask them where their closest cell tower(s) is/are to those areas.
If my memory serves correct, T-Mobile uses GSM 1800/1900 in the US, but AT&T is still mostly 850/1900, and the Tilt may have issues receiving SMS messages while on a GSM 850 tower. You mentioned that the phone worked in Canada on the Rogers network, maybe they are on 1800/1900. Can someone from Canada confirm this last part??
These are just some thoughts of mine as I mindlessly watch TV, so who knows, I could be entirely wrong...
NotATreoFan said:
So just to be clear, when you use an unlocked Tilt on T-Mobile's network, you have difficulty receiving text messages. But when you put your SIM into a T-Mobile phone (Wing), text messages come through fine? If I understood your posts correctly, and my summarization is accurate, then it sound to me as if the Tilt is having problems accessing data services when its roaming off T-Mobile's network.
I would make a note of 3-5 specific areas where you have problems with SMS (ie 300 Block of N Maple Ave), and then call T-Mobile and ask them where their closest cell tower(s) is/are to those areas.
If my memory serves correct, T-Mobile uses GSM 1800/1900 in the US, but AT&T is still mostly 850/1900, and the Tilt may have issues receiving SMS messages while on a GSM 850 tower. You mentioned that the phone worked in Canada on the Rogers network, maybe they are on 1800/1900. Can someone from Canada confirm this last part??
These are just some thoughts of mine as I mindlessly watch TV, so who knows, I could be entirely wrong...
Click to expand...
Click to collapse
Hmmm interesting, now if i informed T-Mobile of this problem is there any way to remedy it without having to go back on a Tmobile phone?
is your tilt set to text through gprs or gsm? that might make the difference..
True2TheGame said:
Hmmm interesting, now if i informed T-Mobile of this problem is there any way to remedy it without having to go back on a Tmobile phone?
Click to expand...
Click to collapse
If it is an issue with GSM 850, then you may be stuck with running cooked ROMs based off of AT&T originals since their network still supports this frequency. To my knowledge there are no WM 6.1 ROMs with an AT&T base currently available.
It could also be a hardware issue... The section of flash memory on your device that stores the radio could have bad sectors (GSLEON3 would be someone who may be able to help you check this).
How did you come to get the Tilt? If you know someone with AT&T service, you can have them put their SIM in and then call AT&T Warranty and get the phone replaced under the 1 year warranty.
EDIT-
Second thought... Have you tried to force the phone into 1800/1900 GSM through the Band Settings tab under Settings --> Personal --> Phone --> Band ?
Currently it's set as GSM, do you think i should change it to GPRS?
NotATreoFan said:
If it is an issue with GSM 850, then you may be stuck with running cooked ROMs based off of AT&T originals since their network still supports this frequency. To my knowledge there are no WM 6.1 ROMs with an AT&T base currently available.
It could also be a hardware issue... The section of flash memory on your device that stores the radio could have bad sectors (GSLEON3 would be someone who may be able to help you check this).
How did you come to get the Tilt? If you know someone with AT&T service, you can have them put their SIM in and then call AT&T Warranty and get the phone replaced under the 1 year warranty.
Second thought... Have you tried to force the phone into 1800/1900 GSM through the Band Settings tab under Settings --> Personal --> Phone --> Band ?
Click to expand...
Click to collapse
Hmm i didn't even think to check their, i'm going to try it right now and report back.
EDIT- So should i be setting it at GSM(900+1800)+UMTS(2100) or GSM(1900+850)+UTMS(1900+850)?
WOW, Finally, thanks everyone for help but forcing the phone into the GSM 1800 band worked now i can finally fully enjoy my Tilt, Thanks once again!

did anybody make 3g att work for a euro touch pro

with all the new software that keeps coming out, i was wondering if anybody found out if they made some kind of software for a euro touch pro to work on att 3g yet?
I think you are out of luck. The AT&T FUZE is the only version of this phone to contain the hardware responsible for receiving the US 3G bands.
Yah, seems like you will be out of luck, as its a hardware issue, not a software issue. You will be able to get edge, but thats about it....

Reflash a T8285 Aussie Telstra

I know there are probably many posts on here, but I really dont have the time to compile them into one answer. So here's my questions:
Has anyone reflashed the Aussie TELSTRA T8285 with Dutty's or Miri's and still been able to the keep the 850mhz 3G opertional in the USA for AT&T?
I ask this as 2 fold: I want to unbrand the Telstra and also install the enhancements of these ROMS.
yes.. you can get back 850mhz 3G
tacginc said:
I know there are probably many posts on here, but I really dont have the time to compile them into one answer. So here's my questions:
Has anyone reflashed the Aussie TELSTRA T8285 with Dutty's or Miri's and still been able to the keep the 850mhz 3G opertional in the USA for AT&T?
I ask this as 2 fold: I want to unbrand the Telstra and also install the enhancements of these ROMS.
Click to expand...
Click to collapse
when i had a telstra i would put the stock telstra HD_Blackstone_Radio_1.10.25.25 on it after flashing a new rom, however i'm pretty sure any of the new radios on dutty's/miri's will work fine.
Works fine on my T8285.
tacginc said:
I know there are probably many posts on here, but I really dont have the time to compile them into one answer. So here's my questions:
Has anyone reflashed the Aussie TELSTRA T8285 with Dutty's or Miri's and still been able to the keep the 850mhz 3G opertional in the USA for AT&T?
I ask this as 2 fold: I want to unbrand the Telstra and also install the enhancements of these ROMS.
Click to expand...
Click to collapse
I have a T8285 in the US and I have tried all thr romes and they do work on the 850. At least in my area that has 850. Not all ares in the us have this available
Well, thanks to all for the quick replies. I'm in Phoenix and have no worries about the coverage, as it is a popular AT&T Market. Just wanted to make sure I didn't kill the 850mhz/3G functionality.
Who's ROM (versions) do you perfer for the reflash of the T8285, Dutty's or Miri's?
My T8285 works perfectly on the UMTS/HSDPA Rogers network in Montreal (850 Mhz)
I'm currently using Dutty 3.8 without any issue.
I also tried Miri's one, but my preference goes to Dutty's ROM with latest Manilla.
I changed several time the radio ROM, but never lost the 3G.
tacginc said:
I know there are probably many posts on here, but I really dont have the time to compile them into one answer. So here's my questions:
Has anyone reflashed the Aussie TELSTRA T8285 with Dutty's or Miri's and still been able to the keep the 850mhz 3G opertional in the USA for AT&T?
I ask this as 2 fold: I want to unbrand the Telstra and also install the enhancements of these ROMS.
Click to expand...
Click to collapse
all the above replies are correct: you'll be fine flashing other ROMS and you'll still have 3G access... but, there are 2 things you may notice after flashing your TELSTRA T8285 with a European T8282 rom (which is what most cooks are using as a base):
(1) you will have to turn 3G access on via Settings-->Comm Manager. for some reason, it's turned off by default.
(2) the 850 3G Band settings in the Phone App may be missing. in pic 1 below you see my Telstra HD without the settings and you can see at the top that i'm still getting a 3G/HSDPA signal with at&t. pic 2 shows my phone after adding the settings via a registry edit, and you can also see that i'm still getting a 3G/HSPDA signal with at&t.
my point, don't be alarmed, YOU WILL still have 3G access without the 850 3G band settings. FYI, i'm using the 1.14 Radio (not the original Telstra version) and have no problems with 3G access
cortez.i said:
(2) the 850 3G Band settings in the Phone App may be missing. in pic 1 below you see my Telstra HD without the settings and you can see at the top that i'm still getting a 3G/HSDPA signal with at&t. pic 2 shows my phone after adding the settings via a registry edit, and you can also see that i'm still getting a 3G/HSPDA signal with at&t.
Click to expand...
Click to collapse
Awesome, Thanks! These replies have really pulled the Aussie option all together.
With regards to your point 2, do you have to re-do the register entries or just let it be and Auto take care of it?
tacginc said:
Awesome, Thanks! These replies have really pulled the Aussie option all together.
With regards to your point 2, do you have to re-do the register entries or just let it be and Auto take care of it?
Click to expand...
Click to collapse
it's been my experience that you don't have to re-do the registry entries. i did not put them back on my phone until now (so i could create the screenshots). it's personal preference.
I also have a T8285 that I got from Aus.
I'm running it fine here in the California Bay area on ATT 3G
Just follow the steps to get to a 1.56 SPL then use USPL to upgrade to whatever ROM you like. I am using Duttys 3.9XT ROM which also has the latest Radio, all works fine. I love it!
-jonathan

[Q] Branded device, can't connect to 4G

DISCLAIMER:
I'm from Belgium and English is not my native language, I am aware that my English is not great so please forgive me.
Hello,
I recieved my HTC One two weeks ago after waiting 2 months. It was a pain in the ass to get the phone.
Here in Belgium the phone is still not for sale so I had to buy the phone on a site from the Netherlands (algebeld.nl).
Now, here is the problem:
I wasn't aware that I was able to recieve 4G LTE in my region until a few days ago, I didn't know this because I never recieved 4G on my phone. Aparently I should recieve 4G and looked into the settings and everything is set to recieve 4G, so my settings are not the problem.
Another thing I noticed was that I am still on older software and didn't recieve the latest update, I'm still on 1.29.111.11.
This concerned me so I did some research and it turns out (not 100% sure though) that my device is branded to T-mobile, even though it is an unlocked device.
So the reason I can't connect to 4G is (I think) the radio module is clocked at a different frequency so I can't recieve 4G.
I was under the impression that I was buying an unbranded device so this kinda blows...
No 4G isn't the only problem, I will also have to wait for OTA's a lot longer.
So my question is:
Is there a way to solve this? I could root my phone in order to get the latest software but still if there comes an update which updates the hboot, it will check my cid and there will be a chance I won't be able to update my hboot and install the update.
If I could just solve the cid problem it would be awesome because 4G isn't THAT big of a deal, but it would be even better if there was a way to recieve 4G or totally debrand my device. I don't know if there is a way to solve this through software since it's the radio module that has a different frequency and that's a hardware problem :s
Anyway, thanks in advance!
Misterthomas32.

Categories

Resources