Related
Hello again, another problem with the official HTC 6.1 Rom update ... IGO 8 does not work anymore ... I re-installed the whole software but the problem is the same : when I launch IGO 8, nothing happens ...
Does anyone else had this problem ?
i had this before with previous wm6.1 roms. you need to use kaisertweak to disable assisted gps.
http://forum.xda-developers.com/showthread.php?t=370884
Thanks a lot for your answers ...
I had to disable A-GPS and the "HTC Home" on the today screen.
But it only works if after having disabled the "HTC Home" I soft reset my device.
That means I will not use IGO 8 anymore, and this is a big issue for me because that was my favorite GPS application.
use Ultimate Launcher...and activate HTC Home in the today plugin of UL...
Works fine...
arnoo said:
use Ultimate Launcher...and activate HTC Home in the today plugin of UL...
Works fine...
Click to expand...
Click to collapse
Thanks for your answer. I will try it but I don't really like this kind of applications. I tried one of these "cube" applications, and I noticed that it was slowing down some other applications using the touch screen like "pencil box" for exemple.
arnoo said:
use Ultimate Launcher...and activate HTC Home in the today plugin of UL...
Works fine...
Click to expand...
Click to collapse
OK, I tried : Ultimate Launcher does not affect the performances of the other applications, very good point.
IGO 8 works fine. But when I try to display the HTC HOME inside UL, IGO 8 does not work anymore ... So your solution does not work for me.
bizarre bizarre...
perhaps you have taskmanager bigbuttons installed?
perhaps you have sync kaiser and launch igo just after? try to perform softrestet before launch igo
I tried all of that, but still unsuccessfully ...
Try disabling the HTC Home music tab. That worked for me.
I had the same problem. Here are the fixes, choose which one suits you best (no need to use them all):
Disable HTC Home. Sometimes it's enoughto disable only some of its plugins (weather, music etc.). I like HTC home, though. This works, but i prefer other solutions.
Put a shortcut to iGo8 in your /Windows/StartUp folder. Pro: After you reset once - yuou can work with iGo8, close it, restart it etc. - no probs at all. Con: Every time you reset, iGo8 starts (so you lose a few seconds in life). This is what I use, and it works gr8.
Just heard that the June 2008 version of iGo8 works well with WM6.1 and HTC Home. My version is older. Didn't try this one yet.
Good luck!
latest patch of igo8 (24 june) version fixes the problem with htc 6.1 / home editions...
But i have 6.1 and TF2D Manila installed and iGO 8.3.2.xxxx and it works fine.
How come?
Hi there
Does anyone else use SPB Pocket Plus (latest version V4.0.2 - Dec 07) and WM6.1 and suffer the annoying problem where the today plugin icons don't pickup correctly after a reset?
It's easily fixed by clicking to refresh all tabs, but surely it shouldn't do it???
I'm also suffering a problem whereby not all text messages are received by my phone. (I posted in the General section with no joy - am hoping that you software guys may know if something conflicts?!) It's very strange as the phone lights up as if a text is coming through, then nothing happens. I've tried a Hard Reset and restore to no avail.
Wierd thing is, my mate has a Kaiser on Vodafone UK (V1615) running WM6.0 and he has the same problem - I'm on O2-UK so it's not a carrier problem.
I set his Kaiser up for him with much the same software as mine, including SPB PocketPlus V4.0.2...
I also (I know, I'm sorry!) have a problem with the today screen if I change things... For example, if I change the backdrop via Pictures and Video's, more often than not the phone will hang requiring a stylus reset. Am wondering if this is SPB PocketPlus related???
Any idea's? (Sorry about the multi questions!!)
Cheers
sorry about the double post!
p.dixon0 said:
Hi there
Does anyone else use SPB Pocket Plus (latest version V4.0.2 - Dec 07) and WM6.1 and suffer the annoying problem where the today plugin icons don't pickup correctly after a reset?
It's easily fixed by clicking to refresh all tabs, but surely it shouldn't do it???
I'm also suffering a problem whereby not all text messages are received by my phone. (I posted in the General section with no joy - am hoping that you software guys may know if something conflicts?!) It's very strange as the phone lights up as if a text is coming through, then nothing happens. I've tried a Hard Reset and restore to no avail.
Wierd thing is, my mate has a Kaiser on Vodafone UK (V1615) running WM6.0 and he has the same problem - I'm on O2-UK so it's not a carrier problem.
I set his Kaiser up for him with much the same software as mine, including SPB PocketPlus V4.0.2...
I also (I know, I'm sorry!) have a problem with the today screen if I change things... For example, if I change the backdrop via Pictures and Video's, more often than not the phone will hang requiring a stylus reset. Am wondering if this is SPB PocketPlus related???
Any idea's? (Sorry about the multi questions!!)
Cheers
Click to expand...
Click to collapse
As far as the PocketPlus, I am using it and I haven't had a problem at all with the icons or anything else for that matter. I haven't had any problems with the txt msgs either. You may need to reset the mms server?? I don't know about that, I just remember reading about it in another thread somewhere... As for the backdrop change, that's not a pocket plus related conflict. I am not sure what else you have installed, but I have changed mine multiple times in the past 2 days and haven't had a single problem or anything that told me I had reset or that I needed to soft reset the phone. I would suggest unistalling the Pocket Plus and reinstalling it. I know that I have had to do that before because of one of the other SPB proggies i used had changed some values in the registry for it. Otherwise, I would contact SPB, they would know how to fix it. Unless you didn't purchase it...
Hi Killerbeans!
I'v tried uninstalling and re-installing a couple of times to no avail unfortunately
The only other things I have installed (all bought and paid for!) that startup with the phone are SKTools (set to performance optimisation) and Kasperski AntiVirus...
I might try uninstalling those and SPB and reinstalling them one by one...
Cheers for the response though!
I have been havng the spb problems since 6.1 installation as well (I am with AT&T in the US, original Kaiser).
Thanks for pointing out the "Refresh All Tabs" option...I have to stupidly admit that I was not aware of it and I have been fixing the icons one at at a time....very boring...However, I have no solution to offer to the problem, other than to verify that it is a real one.
Hmm running fine on my kaiser with the hyperdragon roms...
Are you using the "close button" plugin? if so, did you enter tmail.exe and poutlook.exe as exceptions? don;t doing this could lead to problems
for the icons, I have the same problems too sometimes, did you install it on main memory? are the missing icons from programs installed on storagecard?
there is an option under today plugins->advanced, "refresh icons in today plug-in when storage card is inserted." try enabling that and see if it helps
Bartus
Hi guys!
Thanks for the responses! It's 'good' to know it's not just me having the SPB problem, although not good that it's happening at all!
I've installed it on Storage Card (as I have since my Wizard days). Using SKTools I've set the SDDeamon to startup 1st so was hoping that'd sort it... it didn't
I'm glad the refresh all tabs helped!
I've added those exceptions Bartus so I'll report back! I have the refresh icons when storage card inserted already which doesn't seem to work. It is the apps located on the storage card that don't load though so it has do be something to do with that.
Go back to 4.0.1 it doesn't have the problem.
Hi Sirooga
I'll give that a try, if I still have it on my HDD!
Cheers!
p.dixon0 said:
Hi Sirooga
I'll give that a try, if I still have it on my HDD!
Cheers!
Click to expand...
Click to collapse
did it work
Today Plugin Problems
I also use pocket plus on my Tilt, and it is apparently version 4.0.2 build 6227. What really annoys me is that the today plugin worked perfectly on wm 6.0, but after that &[email protected]#! 6.1 upgrade, it works fine for a few hours after I installed a lot of programs and soft resetted a bunch, until I backed up my phone. After using sprite Backup 5 ONCE, it deletes all my tabs and icons in the plugin and doesn't remember them no matter what I do. It still is checked in the today plugins menu, but it isn't there as there is nothing for it to show. SPB's got some serious work to do.
Dave
p.dixon0 said:
Hi guys!
Thanks for the responses! It's 'good' to know it's not just me having the SPB problem, although not good that it's happening at all!
I've installed it on Storage Card (as I have since my Wizard days). Using SKTools I've set the SDDeamon to startup 1st so was hoping that'd sort it... it didn't
I'm glad the refresh all tabs helped!
I've added those exceptions Bartus so I'll report back! I have the refresh icons when storage card inserted already which doesn't seem to work. It is the apps located on the storage card that don't load though so it has do be something to do with that.
Click to expand...
Click to collapse
Today plug-ins shoud be installed to Main Memory.
Spb 4.01 works far better than 4.02 IMO.
Hi My friends,
I need help. I changed my rom yesterday official at&t 6.1 Rom and today I changed with HyperDragon III OMNIA WM6.1 WWE ROM Full Version.
I tried to install IGO 8 and IGO2006 on both Roms but it doens't respond.
Any problem on IGO with WM6.1 Roms?
Please help me to fix.
It is running but no positioning
Now I have fixed the problem, I installed Dutty's rom.
Program is running. But now it is not positioning... The weather is a little cloudy, any problem with weather?
Please help me
Igo versions before June 2008 dont work with WM6.1
Duttys Rom is based on WM6.0 thats why iGo8 works on there.
Any iGo v8.0.0.44898 or later will work fine on any New WM6.1 based Rom.
Hope this helped.
mskip said:
Igo versions before June 2008 dont work with WM6.1
Duttys Rom is based on WM6.0 thats why iGo8 works on there.
Any iGo v8.0.0.44898 or later will work fine on any New WM6.1 based Rom.
Hope this helped.
Click to expand...
Click to collapse
I am running at&t's 6.1 sans bloat on my tilt and ig0 8.0.0.49545 july edition and it locks up on me..
any other suggestions or known conflicts? i have manilla2d installed and the random stuff that is needed for it to work right
Dr4g0n75 said:
I am running at&t's 6.1 sans bloat on my tilt and ig0 8.0.0.49545 july edition and it locks up on me..
any other suggestions or known conflicts? i have manilla2d installed and the random stuff that is needed for it to work right
Click to expand...
Click to collapse
Is it getting as far as the menu screen and then freezing? The first time u run it it goes through your contacts list and checks for postcodes to add to its database so give it a few minutes because if u have alot of contacts it will take a while to compile everything. Im running the same configuration and everything is working fine.
Today I have just tried. It is working.
I tried many GPS programs, I think VisualGPSce is very fast for locking. Just for 8-10 sec for locking. GPSgate hasn't locked.
Thanks...
I've got wm6.1 and iGo from jan/febr was working ok,
now i tried to run it after half year and just window's pending symbol appears for half sec and nothing.
Tried to DL new iGo, new install. still not working.
no ROM change/no hard reset meantime.
but gave it up quickly, i don't need it now. just was curious.
here is a solution I found on the net ...
1. Turn off the HTC Home on the Today screen and change Appearance from HTC to WM6.1 (or default)
2. Softreset.
Also turn off AssistedGPS (AGPS) using KaiserTweak. I tried that & it worked for me (& on my wife's Tilt).
I have also found that Microsoft Voice Command can intefere with iGo8 it took me ages to figure that out in the end i had to turn off all the options apart from the phone settings which are the only ones i used anyway and that fixed it.
mskip said:
Is it getting as far as the menu screen and then freezing? The first time u run it it goes through your contacts list and checks for postcodes to add to its database so give it a few minutes because if u have alot of contacts it will take a while to compile everything. Im running the same configuration and everything is working fine.
Click to expand...
Click to collapse
i have gotten to the menu screen and yes it has done the contact thing too
its when i hit the map icon or select a favorite to search... anything that actually has to do with navigating... i can browse teh menus fine... its actually when i try to use the program it locks up
p.s. agps is turned off...
Dr4g0n75 said:
i have gotten to the menu screen and yes it has done the contact thing too
its when i hit the map icon or select a favorite to search... anything that actually has to do with navigating... i can browse teh menus fine... its actually when i try to use the program it locks up
p.s. agps is turned off...
Click to expand...
Click to collapse
Which version are you running?
Dr4g0n75 said:
I am running at&t's 6.1 sans bloat on my tilt and ig0 8.0.0.49545 july edition and it locks up on me..
any other suggestions or known conflicts? i have manilla2d installed and the random stuff that is needed for it to work right
Click to expand...
Click to collapse
do you need any other info?
disabling HTC home worked in my case.
all versions I have work now. just no maps for me still there
tomtom garmin xt and google maps all work fine... just igo isnt working properly... this program is my favorite gps tool any help would be greatly appreciated... thanks guys
I have the Manilla 2d Touchflo installed on my Tilt, & in order to get Igo working I have to restart my Tilt & then open up Igo8 before starting Touchflo. It won't open when Touchflo is open...
DJayRage said:
I have the Manilla 2d Touchflo installed on my Tilt, & in order to get Igo working I have to restart my Tilt & then open up Igo8 before starting Touchflo. It won't open when Touchflo is open...
Click to expand...
Click to collapse
tried that... no go for me
Thats really wierd I have a kaiser with manila2D running with all my other crap installed and igo8 works perfect for me. Just the wait the first time it ran to gather contact info but then no problems at all. Im running 8.0.0.49545 (july 30 3008) with tts voices and the ultra skin v5
Try disabling MSVC if you have it and see if that makes a difference.
I have had the same problem. I ended up getting the Sept 1 update of Igo8 on it works perfect on mine using hyperdragonIII and NATF v3. Im sure you can find it.
DJayRage said:
I have the Manilla 2d Touchflo installed on my Tilt, & in order to get Igo working I have to restart my Tilt & then open up Igo8 before starting Touchflo. It won't open when Touchflo is open...
Click to expand...
Click to collapse
what version of wm are you running? it looks like only hyperdragon III is working...
Hi,
I installed Spb Mobile Shell 3 yesterday.
And damn, it looks really cool and everything is fine except one thing.
When I'm starting S2P the loading-circel rolls and nothing happens.
When I switch to the circle-menue of Spb Mobile Shell 3 (I don't know how wo call it, I hope you know what I mean ^^) My screen freezes and I have to do a soft reset.
It's the same with the new Opera mobile. It also wont start, but if I'm switching to the circle-menue Opera starts. It's also a bug but anyhow it starts.
I like S2P so pls help me if you know any solutions.
Yes I also made a reinstall
Same problem here with s2p.
S2p starts only if i have done a memory cleanup or close (exit) spb mobile shell.
Any help please...
_____________________________________
HTC Touch HD Official rom.
I don't know a solution but maybe it helps:
I use the german 6.5 Rom by bauner, the combination Mobile Shell 3 - S2U2 works great.
Miwu
i use spb ms 3 with energy rom 3 and s2u2 with s2p and it works pretty good, maybe u should change rom
the solution is disable 3D on spb mobile shell, only then start the S2P.
I try to find another solution, because I want to enable 3D. Something in the registry or other version of S2P....
Does anyone know anything?
Thanks for all, and sorry for my poor english.
yamagata9th said:
the solution is disable 3D on spb mobile shell, only then start the S2P.
I try to find another solution, because I want to enable 3D. Something in the registry or other version of S2P....
Does anyone know anything?
Thanks for all, and sorry for my poor english.
Click to expand...
Click to collapse
Hi,
I have the same problem, and I tried disabling 3D on SPB MS, but S2P still bugging.
Can anyone help me please?
Hi guys, I'm interested in flashing my X1 with a clean WM 6.5 ROM, without any additional, modified stuff.
1. Does 6.5 run smoothly on the X1 ? What about the memory usage?
2. Has the screen problem (I cannot recall it exatly but AFAIK it concerned either the landscape mode or the dialer) ?
3. Are there any SERIOUS BUGS in 6.5 which would be a reason for you to resignate from flashing to 6.5 ?
4. Which ROM would you recommend, if there are several ?
I want to stress once more that I'm interested only in the clean version, no fancy stuff.
If you have any suggestions concerning an upgrade to 6.5 please feel free to share them with me.
Thanks in advance !!!
just try
I find windows 6.5 smooth enough on the X1. I have not encountered any problems with the screen. I can't say which ROM you should choose, it's a matter of personal taste. I prefer Christian's (clean) ROM. Just take a look at ROM development and try a ROM. Read the tutorials before flashing in order to avoid bricking your phone.
Good luck
thanks for the quick reply. I now recalled the display problem I was talking about: someone reported display corruption concerning the dialer when you use scrolling with the keypad hidden, is this still a problem or has it already been fixed ?
I'm also using Christians clean rom without any major issues.
Just tried the scrolling with the keypad hidden (on the latest 3.904) and you do get graphics corruption, but it's only minor, if you tap on the show keyboard again it rerenders ok again.
Not really an issue for me anyway as I just type the start of the name in on the keyboard and it filters.
I did it screen corruption in the dialer is minor, I think I can handle my phone with that little bug runs smoothly, everything's fine. Can anyone tell me if there's a possibility to customize the "favorites" menu on the today screen ? i tap it and a list of links opens, but I cannot add my own programs.
im using gtrab Pure 6.5 ... very fast and clean.. still didn't happened any problem from over 1 month...
here...
http://forum.xda-developers.com/showthread.php?t=588882
DaFatB said:
I did it screen corruption in the dialer is minor, I think I can handle my phone with that little bug runs smoothly, everything's fine. Can anyone tell me if there's a possibility to customize the "favorites" menu on the today screen ? i tap it and a list of links opens, but I cannot add my own programs.
Click to expand...
Click to collapse
Try CLauncher plugin for launching programs and atcontacts for contacts ... these work fine on mine.
Just be aware that not all plgins are compatible with the latest wm builds and not all are compatible with thw wvga screens.
thanks for the tip, but:
when I install and tap on "applications" in order to add a program I get the following message: the file App3 cannot be opened. Either it is not signed with a trusted certificate, ore one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
what shall I do ?
EDIT:
had to reinstall mortscript, the plugin works fine ! thanks man !
DaFatB said:
thanks for the quick reply. I now recalled the display problem I was talking about: someone reported display corruption concerning the dialer when you use scrolling with the keypad hidden, is this still a problem or has it already been fixed ?
Click to expand...
Click to collapse
There is still graphic corruption on the listbox on HTC dialpads but if you install the X2 dialpad it works completely fine
I prefer Spikegotti...its the best so far..its smooth and ur asking for the same thing i did a while back...clean and nice..i tried on my X1 the first time a Spikegotti's unofficial ROM..WinMo 6.5.its gr8...go for it
circleofomega said:
I prefer Spikegotti...its the best so far..its smooth and ur asking for the same thing i did a while back...clean and nice..i tried on my X1 the first time a Spikegotti's unofficial ROM..WinMo 6.5.its gr8...go for it
Click to expand...
Click to collapse
Question to those who have tried unOff, gtrab, and Christian's: what other differences have you noticed? (other than Christian's running 6.5.3)
anyone knows a weather wiget working with european cities ? tried the titanium weather plugin, but it seems to work with US cities only
DaFatB said:
anyone knows a weather wiget working with european cities ? tried the titanium weather plugin, but it seems to work with US cities only
Click to expand...
Click to collapse
the titanium weather plugin works fine in europe as far as i know.
You just need to find your city code n Accuweather.
Should look something like this EUR|UK|UK186|LEEDS
sillysquid said:
the titanium weather plugin works fine in europe as far as i know.
You just need to find your city code n Accuweather.
Should look something like this EUR|UK|UK186|LEEDS
Click to expand...
Click to collapse
thanks for the tip mate !