Database Develop

qtek 2020i ph10c screen will not align after hard reset

Hi i am new to this site so hello peeps...
Anyway i have had my qtek 2020i for about 3 months now and apart from the odd reset (that i have done) its been a useful tool.
Now the other morning it decided to have a freak out and the start menus locked up. I tried to do another reset but nothinge changed..
Now my dilemma is....i performed a hard reset and now the screen will not align...it asks me to tap to set up my device and i start tapping the little crosses but it will not work..i seem to be tapping the crosses for ever with no luck. Can anybody help?
thanks in advance.

Sounds like "Take it back to the shop" time to me.
Something far wrong mate.

Danny-B- said:
Sounds like "Take it back to the shop" time to me.
Something far wrong mate.
Click to expand...
Click to collapse
spot on simple logic i suppose cheers geez

hehe, you could try a rom update or reflash, might be a problem with the rom

I got the new unit it was working fine......then i restored the backup that my last phone took before it went away and guess what....the problem returned :evil: .
Anyway i reflashed the rom with the qtek one and its sorted. :lol:
What is the best rom in your eyes for the alpine device?

The last O2 ROM with Pugs adaption, the 1.3 radio included.
Search for Pug it should come up with a link to his rom.
The newest O2 rom has an older radio version(1.0) because it has Blackberry support (which i will never use)

I am hardly recommend 1.04 radio version. It solved 3 issues for me and made my phone recieve signal better! This is "must have" version of radio!

Unstable functioning of touch screen

I have HyperDragon III ROM (the 1st rom I installed after buying MDA Vario III), radio 1.71.09.01. Sometimes touch screen works perfectly, no matter if I use stylus or finger. However, sometimes it reacts too slow (2-10 seconds delay) and needs harder pressure.
Above is valid for keyboard, sometimes it reacts light fast, but sometimes I had to keep button pushed for 1-2 seconds to make letter appear on screen.
I had this problem with default T-mobile ROM with 1.65.24.36 radio, also with HyperDragonIII with 1.65.24.36 radio.
I know how to change ROM and Radio. However, I never played with SPL. I think guy who sold me the phone changed HardSPL (obviously, since I can change ROMs).
Can wrong HardSPL make described problems? Is there a combination that will make Kaiser extra stable?
It's frustrating when I need 5 minutes to write a SMS, while guy next to me finish it in 10 seconds with his Nokia N70 (4X cheaper).

I found out this regarding SPL version:
Kais130 MFG
SPL-1.0.Olipof
CPLD-8
To simplify my question: Will change of the SPL solve my problem. If it's not related to my problem, I would rather not touch it.
Thanks all

Probably.
HD III is a WM6.1 ROM. For the best results with the 6.1 ROM's you should be using the 3.* versions of Hard SPL.
Follow the instrucitons in Post #2 of the thread and away you go: http://forum.xda-developers.com/showthread.php?t=396922
Ta
Dave

Check the fifth sticky in the kaiser rom development for changing your spl, I'd be willing to bet thats your problem. Also check the rom thread to see which spl the author recommends using for his/her respective rom.
Welcome to xda, in the future please try to search/browse (this is a problem that has been discussed many times before) and #2 post questions in an existing thread (in your case the hyperdragon thread)

Works significantly better with 3.29. Sorry for my dumb post, I am reading this forum for months (although it's my first post). SPL themes sounds too complicated to me so I didn't want to touch (until I am 100% sure that would help).

Unworking hardware keypad and strange scrolling issue

Hi guys,
Just got my diamond today. It's a 1-month used set, but it's still in pristine condition.
Today, all hardware keypads aren't working, except for the power button (the one on the top). and everytime i soft reset the device, enter the programs list, and it will scroll from left-right, as if the right direction keypad is pressed.
FYI I haven't flashed it with any cooked or official rom. I am unable to hardreset the device as the hardware keypads aren't working.
This is my device information.
ROM Version: 1.93.871.1 WWE
Radio: 1.00.25.05
Please help me as I'm desperately typing this thread.

Can you reset it from settings?

Yeah I can reset it from the settings, but it's not helping either.
Any suggestions?

I have similar problem, but not so bad as yours.
Mine is the call button that some times works and some times don´t.
I really would like to know some opinions about the diamond keypad because there´s almost no feedback in the forum and i think the diamond hardware buttons are really bad

watanabe said:
Hi guys,
Just got my diamond today. It's a 1-month used set, but it's still in pristine condition.
Today, all hardware keypads aren't working, except for the power button (the one on the top). and everytime i soft reset the device, enter the programs list, and it will scroll from left-right, as if the right direction keypad is pressed.
FYI I haven't flashed it with any cooked or official rom. I am unable to hardreset the device as the hardware keypads aren't working.
This is my device information.
ROM Version: 1.93.871.1 WWE
Radio: 1.00.25.05
Please help me as I'm desperately typing this thread.
Click to expand...
Click to collapse
You can do hardreset in settings\system\storage cleaning or similiar because my rom is in portuguese.

battax said:
You can do hardreset in settings\system\storage cleaning or similiar because my rom is in portuguese.
Click to expand...
Click to collapse
Thanks battax.
Anyone knows what's wrong???

Input (Buttons, Keyboard, Touchscreen) Unresponsive Intermittently

Occassionally (more often than not) my keyboard, button keys and touch screen are unresponsive, where I need to hold down the key, or press it multiple times for it to register.
I tried searching but wasn't sure what keywords to search for. Has anyone else had this issue, or know where I can find the info to resolve it?
Thanks!

ROM? Hard-SPL?

Ultimate-X.V8.2G
How do I find the spl?
Also, I had an issue with my previous ROM version. I figured it was due to the ROM, but since I reproduced the problem on the new one now I'm not so sure. Any ideas?

axebox said:
Ultimate-X.V8.2G
How do I find the spl?
Also, I had an issue with my previous ROM version. I figured it was due to the ROM, but since I reproduced the problem on the new one now I'm not so sure. Any ideas?
Click to expand...
Click to collapse
Go into bootloader to find Hard-SPL i imagine you using 3.29 if you used the noob guide to flash and not upgraded since.
You can get into Bootloader by pressing camera button holding in for 2-3 sec and placing the stylus in the reset hole.
The way to find out if hardware would be to flash Stock ROM that is in the WIKI, if fine then may be worth updating to 3.34 then flashing custom ROM.

got the same problem. i think its an problem with my carrier. it seems, that my kaiser are trying to connect to an better antenna. those search tasks slow your kaiser down. you can try it by disabeling your cell phone function.

second to that, the carrier, i got the same problem, but just happend when the cell phone radio of my kaiser its on!!! i see this problem in a HP IPAQ 6XXX and in a TYTN 1 too, help plz its a horrible lag! i am tring to tweak some phone funtions with the registry, regards

Maybe should flash a new radio, check the wiki for 'how to'.
Or the ultimate radio thread. I also suggest everybody to read the wiki and the 'sticky's, sticky was set for a reason.

hey i got the 3.28.407.0 German Rom on my device. What is the best radio for it?

Diamond randomly resets

hi!
my touch diamond's display was broken now for 2 months and has been repairedby htc. yesterday i got it back and it seems like they changed the whole inner life, because all data was gone and there was a different rom installed.
so i tried out some of the new roms and with each of them i got the same prob:
the diamond seems to randomly reset when im playing around with it.
one thing i found out: at one rom it often restarted when i used the TF23D weather-function...
did anyone of you experienced something similar? what can i do? i my device broken again or any SW bug?
thanks!

no ideas?
alrdy tried original rom + original spl, didn't solve the problem.
if u don't have got any ideas i have to send it back to HTC

I got the same problem, can't find a solution