I just wondered if anyone has yet figured out a way to edit the entries in that menu appearing when pressing the hang-up hardware-button for several seconds. It just features lock, airplane-mode, vibration-mode and quit datacall and it would be really nice to exchange one or two things to enable Wifi and/or Bluetooth...
I have been looking for that too, without luck :-(
yeah more options to the long powerswitch menu.
like GSEN toggle/Screen mode changer
taskmanager button, or show taskmanager on the bottom half frame and the other buttons on the othe half of the screen.)
SOFTRESET button
quick safe Erase storage button(inclusive data wipe function)(with/out a password protection)
(for security reasons ....)
Related
I am trying to lock down the Hardware buttons on my m700 using
PHM Regedit I can lock down all buttons successfully except the Windows button using
Flag SET TO 9 ON BUTTONS 40C1 etc in registry
I am also using askarya PocketKiosk Builder 2.6 which on soft reset the task manager works again.
Unfortunately there appears to be a bit of a bug. Although I disable all hardware buttons the and only allow through my own applications it still after a soft reset then reactivates the windows hardware start button allowing access to the menus ontop of my allowed app, simply meaning you can access all programs and settings. (Bit pointless really)
Can anyone help me lock down the windows button and the 4 way navigation pad. Is there any reg tweaks or other suggestions you can help me with
Thanks in advance
I was wondering is there a app that will lock my Diamond by clicking a shortcut?
I don't want S2u2 it's buggy imo. But i would just like to use the std. locking through a shortcut.
Pressing and holding the hang-up button just doesn't work for me.
If pressing and holding a button for 2 seconds is too hard for you then perhaps you should consider buying a slave to do it for you....
It isn't the fact that i don't wanna push it.
But after using it one week i already notice that the pad hangs to the hang-up button a heightdifference of a mm is already present.
I don't like that so i'd rather push a shortcut.
I press the power button briefly, not sure if that's lock, but it works for me.
chech the thread "Lock Screen or put into "standby"? Best set-up?", post 9 & 10.
MSSH said:
I was wondering is there a app that will lock my Diamond by clicking a shortcut?
I don't want S2u2 it's buggy imo. But i would just like to use the std. locking through a shortcut.
Pressing and holding the hang-up button just doesn't work for me.
Click to expand...
Click to collapse
You could do HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLock Enable from 0 to 1 and everytime your backlight goes off (which is quite quick with the Diamond) the device will automatically lock
Ensure that Long Press End Key is set to lock your device (Start -> Settings -> System -> Long Press End Key -> Automatically execute the seleted action: Lock device.
Next open a registry editing program and navigate to HKLM\Software\HTC\Manila\HomeLSKPath and enter \windows\endkey.exe.
Then navigate to HKLM\Software\HTC\Manila\HomeLSKText and enter Lock (or whatever text you want to be displayed on the button).
Save the changes and soft-reset the device (or disable and re-enable HTC Touch Flow 3D) to implement the change.
Personally i've started using Sensor Lock which seems to work really well
http://forum.xda-developers.com/showthread.php?t=422871
Locks and unlocks by rotating the screen. Has lots of nice options and locks the hardware buttons too which is good.
PocketShield looks pretty cool. It's around $11 if you decide to buy it.
I have two questions regarding mapping the Manila key using registry...
1. Currently I map the right key to psShutXP to switch the display off... However I have to press two times to switch the screen off... Any better way (e.g. map to other program) to get it done?
2. In WM's Today, there's a plugin named (sort of) "Device lock" which can lock the screen. Is it possible to map the Manila key to trigger it?
Of course by setting lock the screen when screen off will results in a combination of 1 & 2... but I'd like to know if the above 2 problems could be solved
Thanks~
Is there a cab to have a shortcut to softreset.. shortcut for camera.. or even shutdown..? in Today view or menu
especially im using a cooked rom and have a updated cam on my unit..
anyone...?
Well, i use "SPB Pocket plus" which lets you have lots of shortcuts on the today screen, among the default ones are a button for soft reset, but you can add a camera shortcut from the program files/XperiaCamera folder (or wherever you got your cam-app).
But i also use Smaberg's actionscreen ( http://forum.xda-developers.com/showthread.php?t=479206 ) which can be activated by holding the power button for 3sec, this action screen got shortcuts to soft reset, power off, wi-fi, bluetooth, camera (need to edit a key in the registry for camera to work, at least i had to) etc.
Both highly recommended applications!
noONExda said:
Well, i use "SPB Pocket plus" which lets you have lots of shortcuts on the today screen, among the default ones are a button for soft reset, but you can add a camera shortcut from the program files/XperiaCamera folder (or wherever you got your cam-app).
But i also use Smaberg's actionscreen ( http://forum.xda-developers.com/showthread.php?t=479206 ) which can be activated by holding the power button for 3sec, this action screen got shortcuts to soft reset, power off, wi-fi, bluetooth, camera (need to edit a key in the registry for camera to work, at least i had to) etc.
Both highly recommended applications!
Click to expand...
Click to collapse
thanks.. hmm i just saw also one post about this.. im a bit new to winmo world and i really just cant depend on what i see the first time.. unless ive spent "MUCH" time reading threads here's the link if you want to check it ..
http://forum.xda-developers.com/showthread.php?p=5723867
Hello,
i'm looking for a replacement for AEBplus
I only need a few simple things:
left and right button - should rotate my screen, like it does when i open the keypad
ok button - task manager (or today screen from where i could start the taskmanager)
ok button (long press) - start an application
end call (long press) - lock the device (the you need to enter your password kind of lock)
What program other that AEB can do that and wont use as much CPU resources as AEB does?
you can just go to settings>buttons and assign either keft or right soft key to screen rotate, easiest way IMO
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
nurps said:
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
Click to expand...
Click to collapse
x1ButtonMapper, already tried that?
cheers
I use AEButon Plus on my X1a and I am thrilled with it. It doesn't have much (if any) negative effect on performance on mine.
Have you tried it on the X1?
Also for End Key there is a program called "Long Press End Key" I think. It is nice, and cooked into a lot of ROMs.
Hannigan174 said:
I use AEButon Plus on my X1a ...
Have you tried it on the X1?
Click to expand...
Click to collapse
hi m8, he's trying to replace it with an alternative app...as stated in #1
DrakenKorin said:
x1ButtonMapper, already tried that?
cheers
Click to expand...
Click to collapse
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Is there a way to change some of the keys directly in the registry?
nurps said:
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Click to expand...
Click to collapse
have a look here, didn't check, just searched (doing your homework btw...)
nurps said:
Is there a way to change some of the keys directly in the registry?
Click to expand...
Click to collapse
advanced config - menu (button) - more settings - key mappings
Mobile Magic doenst support the buttons i need. No longpress for End and no support for the OK button at all..that was the first program i tried.
To bad the options for the End key are grey in Advanced Conifg.
X1BC should allow for a lot more options than mx X1ButtonMapper. I think there is also a second application from the same author called X1BH or something. Check that out.
X1ButtonMapper is pretty lightweight actually. The most overhead involved will be by calling the script functionality but that is done asynchronous, meaning that X1ButtonMapper doesn't wait for the called application or script to finish - it just launches it.
I didn't remap the red and green phone buttons because they can't be easily remapped and I think they are central buttons which should keep their original functionality. I think remapping them will cause more bugs than you will gain functionality. With X1ButtonMapper you already gain enough options for the remaining keys (each with short and long press) which should be enough for most applications. You can also reassign the missing FN+key combos on the keyboard.
I did use the Tab key as Ctrl substitude because I think Tab is not important for Windows Mobile. It is substituted in most dialogs with the right/left keys so use these. You can get the original Tab function when pressing FN+Tab for the few situations where you really need it.
I am using X1ButtonMapper for a long time now and havn't had any stability issues - maybe that's the trade off for having less features.
X1Button manager somehow didnt react to my OK key. I allready have a standalone taskmanager mortscript could run but Ok didnt do anythink. Longpress of the softkeys to rotate the screen worked nicely though.
Longpress delay is a little longer than im used to but that not a big problem.
The longpress of the End key has allready a keylock function as standard setting (wich i find totally stupid because i turn the device of with the switch on top). There must be a registry setting that i could alter so it would run the password lock instead.
I will check into X1BC...
X1BC works thank you...and i like it much more than X1BM because i can setup everything to my likings, longpress timing, vibration on/off and wether i want a Control key replacement.
I could even use the panel key to lock my device if reprogramming of the end key button is not possible.
Does anyone know wich program i have to run to password lock my device? Maybe its possbile with mortscript..i should check that...