Front Button Lockdown - P3600 Software Upgrading

I am trying to lock down the Hardware buttons on my m700 using
PHM Regedit I can lock down all buttons successfully except the Windows button using
Flag SET TO 9 ON BUTTONS 40C1 etc in registry
I am also using askarya PocketKiosk Builder 2.6 which on soft reset the task manager works again.
Unfortunately there appears to be a bit of a bug. Although I disable all hardware buttons the and only allow through my own applications it still after a soft reset then reactivates the windows hardware start button allowing access to the menus ontop of my allowed app, simply meaning you can access all programs and settings. (Bit pointless really)
Can anyone help me lock down the windows button and the 4 way navigation pad. Is there any reg tweaks or other suggestions you can help me with
Thanks in advance

Related

Question about the hardware buttons

Hi everyone,
I was wondering... is it possible to change the hardware buttons permanently? I mean, if I do a soft reset, the button are mapped back to their original settings. Do I have to modify the registry and how?
I would prefer a solution that does not require software if possible.
Thx !!
hahahaha, it's all software. Even the OS!
Maybe I wasn't clear...
I mean "I prefer a solution that does not require additional software". Is there a setting in the OS (maybe a registry hack) to change the buttons mapping?
hi atzakas,
after softreset buttons should not be mapped back, they should be as you mapped them in Settings.
They are mapped back if you do hard-reset, but that is understandible, you can't hack it.
you can also check this app with 40 additional commands for hardware buttons:
http://handster.com/product.php?id=6
there you can map to buttons things like: switch programs (Alt-Tab), backlight loop, new task, new appointment, etc
Regards,
Victor
Thanks for the reply, but I wouldn't have asked if it was so simple.
I change the button settings, then do a soft reset and the settings are back to the original settings.
I guess I'll have to live with that
i experienced the same problem with an O2 XDA IIi, however, this is cured misteriously recently

Help: Want to remap hard button

Hi all,
Anyone can help to remap the hard button??
I want to change the Home key to Alt-tab, and the Back key change to OK/Close (1 press for ok and long press for real close the application). I have tried AE button plus, but not function very well.
Attached is the Alt-tab s/w i have used.
Don't know why HTC put a Home and Back key in WM pro device
Thank you very much,
did you reset the device after you changed the settings?
yes, but still doesn't work
There's a software called Hbutton. You might wanna try it.
Just tried Hbutton, but it doesn't work on diamond.........
Awww.. now how am I gonna survive on the diamond without Hbutton?!
There's another software called SmartSkeys (or something oike that) Not sure of it'll work.
Anyone got any suggestions on which software to use to map diamond buttons to many functionalities?
This one works on Diamond: AE Button Plus.
To my understanding from testing AEButton on the Diamond, I have realized that:
The HOME key cannot be remapped.
The Back key is essentially a "WIN" key. You can create a new button and remap the Back key. HOWEVER, the shortcuts DOES NOT WORK when you are at today screen. So here is what I do, I remapped the Back key single click to "Escape". double click to close program, long click to close all programs.
Thats the only logical thing i can think about using the back button due to the limitations.
Any ideas?
Escape = ok/close ?
With AEB Plus I managed to map "action long" to "task manager", but the setting doesn't seem to survive a soft reset.
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Tried AE Button Plus 2.6.3, the "ok" button in AE Button Plus list can refer to back key, my setting is press 1 to minimize, long press to close current application. However, AE Button Plus can't handle the Home button. I already sent a request to them, hope their next version can sort it out.
I'm posting here to find this later. I use AEB on all my devices and want a Diamond. Hopefully it gets "worked out".
tkhs said:
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Click to expand...
Click to collapse
Yes, the mappings worked when TouchFLO was disabled. But when TouchFLO was enabled again, the mappings then didn't work.
Can someone please help me?
I use a golf GPS/Scoring program on my diamond (mobile golf scorer) and on it there is an option to use hardware button to turn display on/off, this keeps the gps active permantly. Its mapped in the program as 'button c' which from what i can tell should be the 'right hardware button' on a usual ppc.
I'm trying to map it as 'back button' using AEBPlus but it will only work on the main diamond screen or 'today' screen. I've tried mapping it to various buttons on the diamond but When i start the golf program it does not work.
Has anyone any ideas? I need to remap a button that will turn the display off no matter what i'm running.
Thanks again
I'd love to change the function of the "Back Button" aswell,
it has been annoying me since the first day I got it.
HButton seemed very promising, but sadly, it doesn't work.
Do hardware keys also have a registry number like the softkeys?
Like 112/113 for the softkeys?
Wondering anyone will use "Home" and "Back" button regularly....Maybe u guys can share your experience on how to smartly use this 2 buttons as I don't have any idea.........
Hello everyone!
This topic is very actual especially on all russian forums (hpc.ru 4pda.ru 4pda.info). Did anyone overcomed this difficulty with remapping hardware buttons? I tryed AEButton Plus but I was unsuccessfull in remapping the dimaond's "back" button - is there any one who did it? Please share the experience - it would be very very usefull to remap this button and to bind it to launching Dynamo3 task manager.
Thanks in advance.
ILya.
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
aydc said:
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
Click to expand...
Click to collapse
so this method willn't work too? http://forum.xda-developers.com/showthread.php?t=355141
the silly part on the htc side is to have 3 of 4 hw buttons do almost the same - if you are in an application, pressing home, back or hang-up button will act as "escape". am i wrong?
for one thing, it would be at least useful to have an "ok" button.
the ideal setup for me would be to use the "go to the tf3d home tab" function of the home key by pressing the "hang-up" button and use the home key as "ok"...

Missing buttons in settings

Hi i have a problem with my MDA IV Compact. I searched the forums but found no answer to my problem.
I want to do some basic button remapping and so i go to settings -> personal -> buttons and guess what. There are NO buttons listed in the buttons list.
Has anyone come across this before and if so can you help me solve it? I mean there are only few hardware buttons present in diamond its a shame not to be able to map them.
Button mapping...
The only button you can map by default is the long press of the 'dial' hardware key. This should be showing in your button list as 'Button 1(Hold)'. There is an application called GScroll available here, which lets you map the four hardware keys by touch (double tapping them). Not exactly what you're after, but it's all I can think of to help you out
thats thing. i get NO buttons on my list gscroll looks nice. too bad its not free ware. but its cheap so i may get it.
you can use dredsensor
this tool allow you to remap buttons depending on running programs
No, no, no!
Diamond CAN have its call key remapped via Windows.
I had the opposite; a glitch entry appeared in the buttons list.
I am attaching a reg-file which will bring back the call button mapping. But be careful, this comes from Windows with localization patch.
Or, you can hard reset. If MDA CIV ROM creators didn't remove it intentionally, it should be there.

[SOLVED] Buttons randomly messed up

Quite randomly, the start, OK, and application shortcut buttons on my Orange tytn ii have stopped working properly.
In ScummVM, I can use them as normal, they're not DEAD, but they don't do what they should. The start button doesn't open the start menu, the ok button does nothing, and the application shortcuts seem to think they're the softkeys...
Yet the softkeys do as well.
I suspect scummvm of having something to do with it, it only started after I remapped a key I was using in that.
So, does anyone know of this problem?
If not, do you think it's likely that ScummVM is changing registry entries or something to prevent windows from intercepting the keys then changing them back on exit, and not done it for some reason?
It's got to be as easy as changing some registry keys, I just don't know which ones and what to.
Thanks in advance
Hmm, after re-setting all the buttons in the "Buttons" control panel they're working again. I'll just put this down to general windows annoyances.

looking for a simple button reconfigurator

Hello,
i'm looking for a replacement for AEBplus
I only need a few simple things:
left and right button - should rotate my screen, like it does when i open the keypad
ok button - task manager (or today screen from where i could start the taskmanager)
ok button (long press) - start an application
end call (long press) - lock the device (the you need to enter your password kind of lock)
What program other that AEB can do that and wont use as much CPU resources as AEB does?
you can just go to settings>buttons and assign either keft or right soft key to screen rotate, easiest way IMO
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
nurps said:
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
Click to expand...
Click to collapse
x1ButtonMapper, already tried that?
cheers
I use AEButon Plus on my X1a and I am thrilled with it. It doesn't have much (if any) negative effect on performance on mine.
Have you tried it on the X1?
Also for End Key there is a program called "Long Press End Key" I think. It is nice, and cooked into a lot of ROMs.
Hannigan174 said:
I use AEButon Plus on my X1a ...
Have you tried it on the X1?
Click to expand...
Click to collapse
hi m8, he's trying to replace it with an alternative app...as stated in #1
DrakenKorin said:
x1ButtonMapper, already tried that?
cheers
Click to expand...
Click to collapse
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Is there a way to change some of the keys directly in the registry?
nurps said:
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Click to expand...
Click to collapse
have a look here, didn't check, just searched (doing your homework btw...)
nurps said:
Is there a way to change some of the keys directly in the registry?
Click to expand...
Click to collapse
advanced config - menu (button) - more settings - key mappings
Mobile Magic doenst support the buttons i need. No longpress for End and no support for the OK button at all..that was the first program i tried.
To bad the options for the End key are grey in Advanced Conifg.
X1BC should allow for a lot more options than mx X1ButtonMapper. I think there is also a second application from the same author called X1BH or something. Check that out.
X1ButtonMapper is pretty lightweight actually. The most overhead involved will be by calling the script functionality but that is done asynchronous, meaning that X1ButtonMapper doesn't wait for the called application or script to finish - it just launches it.
I didn't remap the red and green phone buttons because they can't be easily remapped and I think they are central buttons which should keep their original functionality. I think remapping them will cause more bugs than you will gain functionality. With X1ButtonMapper you already gain enough options for the remaining keys (each with short and long press) which should be enough for most applications. You can also reassign the missing FN+key combos on the keyboard.
I did use the Tab key as Ctrl substitude because I think Tab is not important for Windows Mobile. It is substituted in most dialogs with the right/left keys so use these. You can get the original Tab function when pressing FN+Tab for the few situations where you really need it.
I am using X1ButtonMapper for a long time now and havn't had any stability issues - maybe that's the trade off for having less features.
X1Button manager somehow didnt react to my OK key. I allready have a standalone taskmanager mortscript could run but Ok didnt do anythink. Longpress of the softkeys to rotate the screen worked nicely though.
Longpress delay is a little longer than im used to but that not a big problem.
The longpress of the End key has allready a keylock function as standard setting (wich i find totally stupid because i turn the device of with the switch on top). There must be a registry setting that i could alter so it would run the password lock instead.
I will check into X1BC...
X1BC works thank you...and i like it much more than X1BM because i can setup everything to my likings, longpress timing, vibration on/off and wether i want a Control key replacement.
I could even use the panel key to lock my device if reprogramming of the end key button is not possible.
Does anyone know wich program i have to run to password lock my device? Maybe its possbile with mortscript..i should check that...

Categories

Resources