Related
I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom
This is an known issue in 1.40 ROMs, and currently there is no solution.
Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239
Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured
Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?
Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.
Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx
hi
I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!
Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.
I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??
Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings
Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )
So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q
does this problem remains in the WM5 ?
I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?
Can anyone help me with this problem i just bought kaiser yesterday but i notice that i cant be able to receive any file transfer from a bluetooth connection.
However i can be able to beam file through bluetooth connection to another phone.
Can anyone help to solve this problem please?
thanks
Please be more specific, in order to get answers to your question. How your problems shows? Could it be just that other devices can not see your Kaiser, if so, then you have to tick checkbox "Make this device visible to other devices" on bluetooth settings.
--
Mika
As per the last post, your device has to be set to 'Visible' in BT settings and if you want your device 'Open' to receive all beams the uncheck the box in BT settings under 'Security'
There is another setting to check.
Under Start\Settings\Connections there is an icon labelled "Beam". Click this and make sure the box labelled "Allow incoming beams" is ticked. (Not sure about the exact wording but it is the only checkbox on the screen.)
And whilst we're on the subject of ticking boxes....
I'm pretty sure the two boxes under the FTP tab in the bluetooth setting need to be ticked aswell...Could there BE anymore boxes to tick for 1 simple operation?!
Similar Issues
I am having similar issues, but a bit more severe. Kaiser wont see my laptop that has a USB bluetooth dongle. It can see my bluetooth headset just fine. But it refuses to see my desktop and my desktop refuses to see it. Any suggestions
JKO
jack_b_uta said:
I am having similar issues, but a bit more severe. Kaiser wont see my laptop that has a USB bluetooth dongle. It can see my bluetooth headset just fine. But it refuses to see my desktop and my desktop refuses to see it. Any suggestions
JKO
Click to expand...
Click to collapse
This sounds like a problem with your laptop/dongle, if your kaiser is able to see other things...
What rom are you using? I was using alex's rom for a while but he some how removed the ftp tab in the bluetooth settings and I was never able to receive any files. I switched over to sleuth's rom and it fixed all my problems.
kinktao said:
What rom are you using? I was using alex's rom for a while but he some how removed the ftp tab in the bluetooth settings and I was never able to receive any files. I switched over to sleuth's rom and it fixed all my problems.
Click to expand...
Click to collapse
It's the same in Dutty's new ROM. The FTP tab is gone, and now I (and a few other people) can't send/receive via bluetooth.
Technical intervention is required here ...
I'm facing the exact same problem with my TyTn 2, but here are some spacifics that require an expert's opinion...
1. The device sends perfectly...
2. When it comes to recieving, here's the low-down:
-I tried sending a pairing req. from my computer (through my BT dongle) & the phone received the req.
-After the pair, the computer sent & the device received (no problem until now)...
-I tried sending another file (from my Nokia 6300) & there was no response from my phone...
-I tried sending from a Nokia 6260, the phone received without even the need to pair!!!
What I want to know is the technical reason for this to happen???
P.S.
Here are the options set on my device:
-Receive all incoming beams (Checked)
-Turn on BT (Checked)
-Make this device visible to other devices (Checked)
-Authentication (Passkey) required (Unchecked)
I think it would be a whole lot easier if you just packed your phone up and sent it to me. I would uh, take care of it for you.
Bluetooth beam fixed
You have to fix bluettooth with this cab
http://forum.xda-developers.com/attachment.php?attachmentid=69625&d=1202484170
after fixed make soft reset and bingo!!
k101d
Thanks alot k101d for the quick response, but as I'm quite skeptical when it comes to messing around with my phone's internal configuration or registry files & so on, I would like to know the source from which you got the .CAB file, & what it exactly does (on the inside of course)...
Many thanks again, dude...
Oh, thanks a lot k101d.
Till today I was so dissapointed with this BT of mine (it costs about 100 €).
It worked !!!
Yo costas2by4AIO,
sorry if I'm gonna be bothering you, but bare with me & my desperate questions...
What exactly were you suffering (concerning BT) from before applying the .CAB file, & what was the result that satisfied you?
Hi Guys,
Need Help......
I am not able to beam more than one file altogether with my HTC tytn II
Please help me to figure out, How can I beam files altogether to other Bluetooth device instead of one by one.
Thanks,
k101d said:
You have to fix bluettooth with this cab
http://forum.xda-developers.com/attachment.php?attachmentid=69625&d=1202484170
after fixed make soft reset and bingo!!
k101d
Click to expand...
Click to collapse
I can't download this .CAB file any more ........anyone could help?
Or any way to fix my bluetooth problem.
I can not send or receive file with another PPC or even my computer.........
Please someone help
I do have the same problem. I can't send or receive files (contacts, video, photo, music, ringtones) from other phones.
Already tried HTC patchs, but no solution at all.
Tried to download that file, but the link is not availlable. Can someone post the file again or have another solution ?
Hi guys!
I've just upgraded my phone from wm5 to wm6.1 but i encountered problem regarding with the wifi. my wizard can't conect to any wifi but it can detect any presence of wifi around. i've tried to hard reset it but the problem remains the same. i don't know what to do.
and also, upon upgrading, my phone lost the voice tag(voice dialer) program. i want to have it back because i just bought a bluetooth headset that supports voice dialer.
thank you in advance!
raevinor said:
Hi guys!
I've just upgraded my phone from wm5 to wm6.1 but i encountered problem regarding with the wifi. my wizard can't conect to any wifi but it can detect any presence of wifi around. i've tried to hard reset it but the problem remains the same. i don't know what to do.
and also, upon upgrading, my phone lost the voice tag(voice dialer) program. i want to have it back because i just bought a bluetooth headset that supports voice dialer.
thank you in advance!
Click to expand...
Click to collapse
The wifi might be a problem of authorizations, MAC filtering, etc...
Upon upgrading your phone did NOT lose voice tag, instead the chef who cooked the rom you're using decided not to include it. Either you get the program and install it or install a rom that has it
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
omar302 said:
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
Click to expand...
Click to collapse
Thanks Omar, I was kinda thinking that it may be hardware issue, but I don't anymore, I am trying something else actually as we speak. The only thing I haven't tried before is another hard SPL and I think that's the problem, I installed another version hspl1.34 and it seems more stable now and wifi keep connection, also with another hspl version (it was hspl 1.24) RAM under devise info>hardware showed 128, now it is 192. I will test in intensively and post my results here in case nay one else have the same issue. Hopefully I will not have to send it away for repair. Thanks for your info anyways.
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Kwasmir said:
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Click to expand...
Click to collapse
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
With my phone, i tired all Hard SPL versions and even went back to stock SPL & Rom 1.37 & 1.93 and it still didn't fix the WIFI issue. it will work for 5-15 minutes then it will not work.
Anyway, I got a replacement phone as apparently they couldn't fix it.
pufeks said:
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
Click to expand...
Click to collapse
...I have the same problems with you
However, I think the problem may caused by different ROM versions.
My hTC version Diamond initially flashed a Chinese version ROM, and the WiFi connects well, while I changed to Dutty's most updated ROM, this problem comes and I cannot figure out why untill now.
Some friends also suggested to go to the Power Management and change WiFi to "Best Performance", I tried and failed again.
WiFi can open and connect to Routers located in library of my university, nevertheless it cannot open any pages.
I'm also waiting for any person that can solve the problem and then help us figure out why....
thanks in advance!
I got the same problem as most of the people have. and i think "Fail to turn on wifi" is a very common among guyz who got HTC TD.
I dont know what should be done, i almost tried every thing. actually my phone was locked to 3 mobile Sweden and i unlocked it but my wifi was'nt working before unlocking too but i did'nt gave attention to it. Now i noticed it.. is that any one know how to lock it again soo that i can send my mobile for repairs or, any one know what should i do.
I would recommend upgrading your radio and your rom.
Ive been rocking the setup in my sig for some weeks now and its been flawless, stable and fast.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
Hi,
Im using AlphaZero V7 NLD,
Im have 1 wifi point in my house, downstairs.
even when im on the attic i have 80% signal strengt.
My router is a draytek 2820G router.
Wifi for me is very good. .. correctly, AZTOR V7 NLD is very good for me.
im on t-mobile network.
Radio Radio v1.00.25.05 , Radio v1.00.25.08, Radio v1.00.25.16, where all good,
now testing Radio v1.08.25.20, HDSPA signal is bit weaker atm.
my best radia atm i think, v1.00.25.08.
im betting, that the starter of this toppic, who has 5 access points in his house all have the same SSID. This is not the way.
Or make 1 big AP aera, bij connecting the AP's to each other.
of try to set every AP its own SSID, and its own Channel.
Louis
WIFI problem in HTC Diamond.........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
pranavsethi said:
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
Click to expand...
Click to collapse
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Wifi & Bluetooth not detected by HTC Diamond
Someone pl help. My HTC Diamond is not detecting bluetooth devices neither is detecting wifi. It was earlier doing so and working fine however I believe after installing tweak TD & t3d config it has stopped working. I have installed new ROM also but to no avail. Can someone pl help!!!!!!!!
Wintermoonlight said:
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Click to expand...
Click to collapse
i also have the same problem. it detects a wifi (my router at home Aztech brand), then trying to connect to it, and then it always showed the wifi as "unavailable". i put my phone 2 mm distance from the antenna of my router it also won't connect. i have change dozens of roms, win 6.1, 6.5, 6.5.1, different cook, MTTY, all with no success.
i've looked for internet and google for answers, i seen quite a lot of forum has described this issue, but with no solution. most of the ppl suggest in various forums to pull the wireless slider to "Best Performance", ofcourse i have done that, but is just the same result.
i'm still trying searching for a solution for this, i hope is not a hardware issue because my warranty has already ended. i'm currently using Gen Y R4.1B rom
pufeks said:
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
Click to expand...
Click to collapse
Ok consider now wifi will work by re-flashing the spl.
But what is the relation between spl (os/winmo loader) with wifi?
another dang unsolved diamond wifi?
bravo.
same problem with wifi on diamond2
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
wjenya said:
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
Click to expand...
Click to collapse
nope, i also put Gen.Y WM6.5 then the problem still arise.
i'll wait any solution until my diamond is totally wrecked
Every time I try to sync my AT&T Fuze with my Lincoln, I have to start over creating a new sync connect via Bluetooth. I didn't have this problem with my old AT&T Tilt. Does anyone know how to make this work properly?
I have the same problem with my Touch Pro & Altima 08. After making the first call via bluetooth I have to start over creating an new sync. I didn't have this problem with my old O2 Atom Exec
I had this consistently happening with my Dell D620 until I loaded the (unofficial) follow-up to .Net3.5 Mobile: Microsoft_[1].Net_Configuration.CAB (have .Net 3.5 on my TP)
Afterwards, my issue disappeared.
johnston21 said:
I had this consistently happening with my Dell D620 until I loaded the (unofficial) follow-up to .Net3.5 Mobile: Microsoft_[1].Net_Configuration.CAB (have .Net 3.5 on my TP)
Afterwards, my issue disappeared.
Click to expand...
Click to collapse
Where did you download this from?
i think the bluetooth on the fuze is dodgy cuz i couldnt even connect to my g/f Sprint Mogul to send her a ringtone, both phones pop up a message saying unable to communicate with device or something like that, i know its not my g/f phone cuz i have connect her cell to her laptop manytimes but i havnt really used my cellphone *The Fuze* bluetooth much.
Same issue, my wife's navigator has the same issue. However I had this installed (LINK)
But on my neighbors Ford Fusion, no problem at all.
mstaxin said:
Where did you download this from?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=373721
1'st post.
Microsoft.Net
Microsoft.Net CF 3.5 fixed the problem as well as several other problems I was having on the Fuze. I highly recommend that everyone download a copy of this and install it on your devices. I think it will solve most of our problems.
mstaxin said:
Microsoft.Net CF 3.5 fixed the problem as well as several other problems I was having on the Fuze. I highly recommend that everyone download a copy of this and install it on your devices. I think it will solve most of our problems.
Click to expand...
Click to collapse
Are you referring to the actual .net 3.5 CE, or the Config fix/mod cab I posted a link to?
The actual from Microsoft's website.
allthatinny said:
i think the bluetooth on the fuze is dodgy cuz i couldnt even connect to my g/f Sprint Mogul to send her a ringtone, both phones pop up a message saying unable to communicate with device or something like that, i know its not my g/f phone cuz i have connect her cell to her laptop manytimes but i havnt really used my cellphone *The Fuze* bluetooth much.
Click to expand...
Click to collapse
I don't have that problem. I send and receive bluetooth files fine. Since you admitted you don't do it often, I'm going to side with user error.
While not a TP/Fuze, my touch did this in a rental i had. I ended up just deleting EVERY paired device and starting from scratch. Worked fine since.
The problem came back yesterday. It appears every time you restart the car, Microsoft Sync doesnot see the FUZE until you go into the FUZE's bluetooth and tell it SET AS HANDS FREE. I do not know if this is a FUZE problem(Bug) or a Microsoft Sync problem. It seems that it's a FUZE BUG! How do we get it fixed?
Hey there everyone, I posted on another tread about this issue, and I think I resolved it. Happy bluetoothing:
drewsky208 said:
I was having a problem not unlike yours, where I pair it the first time, and all is well, and the next time it doesn't do anything. I fiddled with my car's bluetooth (BMW ULF), and a headset and they would connect, after fiddling, but just not on startup. I finally determined that it appeared that the phone was not setting up a keepalive with the paired object. I found two reg keys in the bluetooth stack that were relevant. I changed them, and it now works exactly as you would expect every time!
Keys:
HKLM/Software/Microsoft/Bluetooth/Audiogateway
ConnectHFOnCall=0
The default is 1, which instructs to only connect on a call
PowerSave=0
The default is also 1, but this makes bluetooth be "awake" all the time
Change the settings, soft boot and you shoudl be good to go!
Hope that helps
Click to expand...
Click to collapse