THX..............
go into bootloader mode (hold volume button and press soft reset)
do another soft reset to get out of bootloader
Related
I cannot exit boot loader in XDAIIs (v2.06)
Follow WIKI instruction, hold camera buton + Power + Reset
but still not exit.
Please help
Thanks
To EXIT Bootloader you hold Reset and Power - a Standard Hard Reset.
If you hold record as well then you wil go back to bootloader.
Can anyone please guide me how to enter to bootloader mode? I want to upgrade my Radio. : :?
to get my XDA IIi into the bootloader, I keep trying the reccord button, power, and hard reset but it just does a hard reset and comes up with the O2 splash and then loads windows???
am I doing something wrong here?
Can anyone pls. advise me??
Priyal
To get to bootloader, you need to press and hold the power button, the action button (the d-pad) and the reset button for about 2 seconds until serial is displayed clearly on the screen.
where to find the reset button
i have krome navigator f1
i am holding dpad + power button but not able to find the reset button..please help me how to find it
hardreset.eu/images/o2_xda_2i_hard_reset_soft_reset.jpg
Hi guise
I have diamond to test it
it hungs on screen (smart mobilty):mad
how can i format it ?
i tried by pres and hold buttons with rest ::
dont the manual spc how a hardreset is performed ?
Rudegar said:
dont the manual spc how a hardreset is performed ?
Click to expand...
Click to collapse
It dose not manual.
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Did it come with a CD? I think there was a copy of the manual for my Touch on the CD that came with it.
rorydaredkign said:
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Click to expand...
Click to collapse
Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks
all right
what combination did you do to get to bootloader? just so we all know
im glad to help
Rory
rorydaredkign said:
im glad to help
Rory
Click to expand...
Click to collapse
lol
You should use that as a motto.
go to bootloader is:
hold down button and press (red) reset button
Bingo! This is the same as what the manual said. YJ
Use2Smoke said:
go to bootloader is:
hold down button and press (red) reset button
Click to expand...
Click to collapse
I found that the manual is wrong. The way to perform a hard reset of the Touch Diamond2 is:
1. With the Touch Diamond2 switched off, press the volume up and down buttons simultaneously.
2. Keeping them pressed, use the stylus to briefly press the red soft reset button (you’ll have to remove the back of the Diamond2 to do this).
3. Release the volume buttons when a message flashes up to say, “This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.”
4. Press the volume up button.
I tried to search so if this is a re post im forreal sorry.. but i dled a CDMA rom and started a bootload .. and now im locked out..
Grey screen .. no button response.. Someone re assure me im not dead in the water.. .
I appreciate it... "Read twice flash once" right.. hopefully my phone will survive the live and learn process with me.
try a hard reset
Hard Reset (This cannot be performed while the device is connected/charging)
With the device turned off, press and hold the TALK/SEND and END/HANG UP buttons, then the press and hold the POWER button until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel."
Release the TALK/SEND, END and POWER buttons.
Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
(procedure found in Wiki)
Tmo or ATT?
both have official roms out, or found in a thread, i would try the correct one for your phone...
best of luck to you... i hope everything turns out ok
Official AT&T HTC Tilt2 Rom
http://forum.xda-developers.com/showthread.php?t=629059
Official T-Mobile TouchPro2
http://forum.xda-developers.com/showthread.php?t=620550
IMEI can also be found behind the battery
Are you able to enter bootloader mode (restart the device when holding down the VOL down button)?
If so - load a GSM ROM to the root of your SD card. and name it RHODIMG.nbh instead of ruu_signed.nbh. Then enter bootloadermode. You will have to press the powerbutton to flash the "update", and then soft reset with your stylus after update (or take out your battery).
Hope it sorts out
Hard reset isn't going to do anything if you've put a GSM ROM on your CDMA phone. You should be able to get into the bootloader though, as Novek has said (try pressing "reset" with the Volume Down button held down), then you can re-flash a CDMA ROM.
Recently my mobile fell down , after that i am facing below issue,
1.Holding volume down+power button is not getting me into bootloader mode.
2. Holding camera+volume down+power buttons gets into bootloader mode but i cant do hard reset using any combinations(including left+right softkeys and hardreset button )
3. Also unlocking using power button opens a hell lot of windows instead showing home screen
I guess this has to do something with hardware
Can this be rectified somehow?
just changed radio problem solved