Diamond does not boot after disable MUI in registry - Touch Diamond, MDA Compact IV General

Hi All!!!
I disabled MUI in hklm\mui\available to switch from russian to english and diamond no longe boot windows.
Hard reset doesn't help - device shows "cannot boot device becase of ..." message and prompts for SEND to hard reset but this does not help.
Please any advice!!!
Regards,
----
Alex

Volume down + Center circle + Soft reset = Hard reset

Related

Problem doing a hard reset

After installing the wizard2ba rom, I could not hard reset my device. I selected the registry hive and the storage menu but pressing the mail button did nothing, pls help me. soft reset works okay.
sorry, it was false alarm. my mail key was faulty. thanks

Cannot upgrade to WM5

Hi Everyone,
First, please forgive me my English - it is not my native language.
After year and a half of using BA(PH20B1, German O2) with Windows 2003 I decided to upgrade to WM2005. Everything was good until the moment after upgrade, when I suppose to hard reset and then press "Record" and "Windows Media" buttons (p.9 in Helmi Rom AKU 3.2 installation instruction). After hard reset I am getting screen with color stripes and after the moment radio version information (strange, should not it be both radio and rom version?) appears (R 1.10.00).
Whatever I try ("Record" + "Windows Media"+ Reset or "Record" + "Windows Media" + Power + Reset) I am not able to got screen with three options. I am stuck either on color stripes screen or go to bootload screen (Serial v2.07).
Can anyone be so kind and help me? I can flash it back to previous version but I really would like to have WM2005.
Thanks in advance,
Bitwise
have you tried pressing "power + soft reset" first and after a split-second, tap and hold on "camera + record"? that should bring up the three options.
i gather you refer to the "camera" button as the "windows media" button?
it's strange your unit does not display the rom and extrom versions, together with radio, upon bootup...
Yes, I have tried this with the same negative result...
press reset button, and before radio and rom versions show on screen press and hold record and camera(windows media) buttons
I have tried it too. I think the problem is related to the fact that it is something wrong with rom itself. The upgrade process finishes without any errors but after reset I can see only radio rom version...

Help I Can't Unlock My Diamond

Hi,
I have a big problem, today I connected my Diamond to my PC, when activesynch was connected, my Diamond has rebooted automaticly. After rebooting, my Diamond is locked automaticly and I can't unlock it. I have tried to unlock normaly (push, with the stylet, the button unlock) but nothing happens ! The TouchFlow don't work, I can't push the button !
I tried to reboot several times but for to reboot I can't push the power button because it is locked. I need to remove the battery and after my diamond reboot and it relock again.
I tried to HARD RESET (Volume Down and Enter button press + reset) but it's the same because these buttons are locked, it reboot same as soft reset.
My diamond has the ROM 1.37 UK and I have modified the configurations by the post "List of diamond tweaks" (with automatic locking and other performance configuration).
I just want to enter in my diamond but I can't flash again the ROM because it don't want to connect with activsynch because it is not started completly. It lock just when I have the screen "Windows mobile" in green.
Please Help me :-(
Take the battery out
Please read my post -->
"I tried to reboot several times but for to reboot I can't push the power button because it is locked. I need to remove the battery and after my diamond reboot and it relock again."
I know, I can reboot if I Take the battery out but after my Diamond is always locked.
Sounds like the phone is fubar'd...best to send it back seeing as you have tried most of the methods to get it sorted out.
wouldnt waste anymore time on it, id get it sent back to where you bought it from and get them to replace it or send it to HTC and get them to fix it.
Ok, I hope never have the same problem in the futur
Remote registry editing
If you can have the activesync connection working on your diamond, you could try to reset back the autolock feature by using a remote registry editor and the reboot your diamond.
You have to change back the following value:
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable to 0

Bricked my Diamond any Fix?

Hello
today i installed an application from untrusted source and it bricked my HTC touch diamond
it gets stock for 5 mins on the htc logo screen then displays "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source, Press SEND to reset your device or press any other button to cancel, this operation will delete all your personal data and restore the device to its factory default settings."
i pressed all the buttons on my diamond but none works.
i would really be grateful if anyone helps me to fix my HTC (without erasing all the data if possible)
thanks for your time
have you tried a hard reset?
I can Hard reset it but is there any other way to fix it without losing the data or any way to copy the data to my PC while the device is bricked?
thanks
If you are able to reset your phone via a hard reset, it is not bricked. Backup people!
back up..........
and back up again
chribruu said:
If you are able to reset your phone via a hard reset, it is not bricked. Backup people!
Click to expand...
Click to collapse
Whats the best way to back up?
Thanks
I'd recommend SKKV tols along with PPC PIM backup (don't forget about your registry.
you can find a lot of freeware backup apps over at freewareppc
Resco Backup is awesome if you don't mind paying a few bucks... How much is your valuable data worth to you?
I fixed my device thanks a lot for your help everyone!
adwinp said:
I'd recommend SKKV tols along with PPC PIM backup (don't forget about your registry.
you can find a lot of freeware backup apps over at freewareppc
Click to expand...
Click to collapse
how can i backup the phone when it cannot estabilish connection with activesynch?
i did some egistry fauts, now the phone boots up, but there is just balck creen ant the start button, the phone button and the batert/network button
when i tpa on start button only appears the progrma section, when i tap on it nothing happens...
the biggest problem that ii cannot make a connection between the pc and the diamond...
what shuold i do to fix the problem?
You can enter the bootloader and connect it via USB there.
Enter + up on volume + stylus should enter a tri-color screen.
intx said:
You can enter the bootloader and connect it via USB there.
Enter + up on volume + stylus should enter a tri-color screen.
Click to expand...
Click to collapse
what is the enter in this case?
soft reset or the power button, or the round button which i use for taking pics?
i got to the bootloader, there is the tricolor/4colour/ screen, red green blue and white,
in the red writes daim100 mfg64m
spl+1.40. Olinex
MicroP-Diam (led) v11
in the green field
fsoc-diam stage_pvt v0x32
blue field is blank
in the white field it writes> usb
but i cannot connect tothe pc, so dont have activesynch and cbbot flash the ppc...
PROBLEM SOLVED
http://forum.xda-developers.com/showthread.php?p=3251939#post3251939 #23

[Q] My topaz cannot open

Hi,
My TD2 cannot open. It lock up on boot screen and dont response soft reset or another buttons.
I tried hard reset and its completed successfully but when I push volup button it restart and stop again.
How can I fix this problem or setup a new rom?
Device spec:
WM6.5
4.49.25.91
61.44etc.25.35u
2.53.76952
Sorry my english, I hope you can understand

Categories

Resources