How can I make it last longer because is very annoying when am trying to make a phone call and when am waiting internet to load a page ...? I changed backlight setting but nothing changed...
change it from registry
How can I access registry ?
Do you have Firmware 1.35?
I had this problem with this firmware.
Now i have upgraded to 1.37 and the problem is solved.
Related
I have recently upgraded to the Wizard Rom on my SX66.
I have installed the following patches.
Code:
mamaich Automatic overclocking
Tweaks For the Wizard2BA ROM
mamaich Buttons Fix
mamaich messing files from HTC Wizard
Customization XML Tools
When I receive an incomming call, I can try to use the softkey to answer or the green hardware key and the result is always the same unless I answer within about 3 seconds of it ringing. I lose the caller. I have to go into my phonebook/call log and dial them back.
It works sporaticly. I think that it may have to do with running FeederReader... I usually have it running, but can't say that it is always running when I have the problem.
Anyone else have this problem or a fix for the cause?
You can try this. Worked for me.
This is not the problem I am having. The problem I am having is that when I press th button to answer the phone, it stops it from ringing and does not answer.
I already have my ringing time set to 30 seconds which is the max.
Anyone else have this problem?
Hello, hopefully someone can help with this problem. I have a Tilt, stock rom, nothing cooked. I have the HTC home, advanced config, and kaisertweak programs. I've searched for hours but I can't find a fix. My Tilt makes no noise or vibration for an incoming text message. The pop up doesn't come up either. The only thing it does is light up the screen and the icon changes on the home screen. All settings are set to work, start>settings>Sounds...., and advanced config sms delivery notification>enabled. Again, I have searched for a couple of hours and can't find a solution. I tried several cabs, wm6 sms fix (or something like that) and also the reg fix threadingdisabled and nothing works. Does anyone have any suggestions. Thanks
What are you running in terms of ROM and radio? Could be a radio problem.
Everything is stock. I haven't changed any ROM or radios.
I've got the same problem as you. It's only ever with incoming texts, everything else works fine. Many a time I've thought that I'd figured out the source of the problem but it just keeps coming back.
i've also discovered today that with mms messages the alert works just fine, it's only sms causing a problem. i'm going to keep trying, if all else fails there is always a hard reset.
Looks like a hard reset has fixed it.
Sounds like you had the same problem as me, which is the SMSAvailable key in the registry was set to 0.. No idea why this should be if you havent done anything to your phone. If it happens again load up a reg editor and search for that key and make sure its set to 1
I recently had this problem and my key is set to 1. After like 5 or 6 messages the sound will just stop working for SMS. I'm on CUSTEL 2.1 and never had any issues. This just popped up the other day.
I have no software that manages ringtones or anything like that.
I know, I know before the torrent of replies happens - "Why didn't you Search", "You should have searched before posting" et etc ...... I did search and the results didn't help
I have two Kaisers with identical software builds (slightly different contents but the base OS is identical). On both of these I have (had..) the backlight issue where if the backlight was off when the device was locked (either via the 'Device Lock' Today item or via Battery Status 'DeviceLock on Wakeup'). To enable the backlight it must be unlocked and in bright sunlight this is very difficult.
Now for some reason this behaviour has changed on one of the Kaisers - the 30-second dimming still happens when locked or unlocked, now however tapping the screen turns the backlight on. This is exactly the behaviour I want I assumed there would be a registry difference between the two however I can't find one. All the values in the keys
Code:
HKCU\ControlPanel\BackLight\
HKCU\ControlPanel\BackLight\LockLevel\
HKLM\ControlPanel\BackLight\
are identical. I was hoping to copy the changed registry values and include them in my next ROM re-build but I can't see any differences.
Does anyone know what other registry keys I should look at?
Cheers
Andy
Install this cab and power the phone off and power it back on.
Hey presto brightscreen when you want to unlock the phone!
dwarf said:
Install this cab and power the phone off and power it back on.
Hey presto brightscreen when you want to unlock the phone!
Click to expand...
Click to collapse
Thanks for that but that is the behaviour I have at the moment without a startup application. There is obviously something in the registry that is making this work as I want it on my Kaiser. I just want to know what it is?
Andy
I think I have fixed it....
After rechecking the registry settings I found a difference and I don't know how I missed this previously. I have made the change on the Kaiser that wasn't working as I wanted it and now it's working exactly as I would like:
Code:
[HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel]
"LockLevel"=dword:ffffffff
No more guessing when trying to unlock it in sunlight....
If anyone is interested?
Cheers
Andy
TQ very much.
It is working like you said.
No need to use 3rd party app. Just a simple registry tweaking.
Regards,
morisa
dim backlight on device-lock
I recently flashed to a WM6.1 ROM (ATT 3.57.502.2) and I have noticed that now when you enable the device-lock it does NOT dim the screen. I actually preferred it that way as it helped me realize when I had a successful tap to enable the lock. Not to mention battery-life issues when putting phone in a tight pocket, immediately afterwards.
Can somebody enlighten me on how to make it behave as it used to? I tried to edit some of the registry entries mentioned in this thread, and others, but none seem to apply to the device-lock. Again, I'd like to have the screen dim on device-lock as it did with my old ROM.
Thanks in advance everyone.
,jR
ADB100 said:
After rechecking the registry settings I found a difference and I don't know how I missed this previously. I have made the change on the Kaiser that wasn't working as I wanted it and now it's working exactly as I would like:
Code:
[HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel]
"LockLevel"=dword:ffffffff
No more guessing when trying to unlock it in sunlight....
If anyone is interested?
Cheers
Andy
Click to expand...
Click to collapse
Thanks, that works... BUT
on my Kaiser only until the next soft reset, then dword is back to 00000000. Anyone else see the same? Solution?
Loewe538 said:
Thanks, that works... BUT
on my Kaiser only until the next soft reset, then dword is back to 00000000. Anyone else see the same? Solution?
Click to expand...
Click to collapse
For me also same problem, OS is WM6.1
Loewe538 said:
Solution?
Click to expand...
Click to collapse
Found out that the cab from post #2 partially solves it. You still have no backlight the first time after a reset, but at least you don't have to go into the registry every time after resetting.
Too bad it sets the level to x0A instead of x0FFFFFFFF.
Key to try for backlight woes
I've had this problem since flashing from 6.0 to 6.1 AND selecting an unlock password at initial startup. Sometimes it would reset backlight time to 10 sec. after soft reset and it was even resetting it without a soft reset for a while. Changing the "Locklevel" key helps as previously posted, but sometimes it would get reset to "0" from my setting of "7" intermittently and then the problems returned. a soft reset always reset this key to "0". I found another key below which I changed from "1" to "0". everything has been totally normal for a week of heavy use. I have not yet reset, but at least it behaves normally even when I use the Today screen Device Lock.
The key is HKLM-Control Panel-Backlight-DimBKLinUnlockScreen
The only remaining issue is sometimes when I power on from suspend the screen comes on and then goes off immediately. Hitting the button again keeps it on.
Good Luck!
I really love the phone except i`ve got the same problem as i did with the Diamond 1. When I receive a message the sound doesn`t go and it doesn`t vibrate but the green LED does flash. The second I turn on the screen using the standby-key it vibrates AND I can hear the ringtone. It drives me crazy. I didn`t have this problem the first couple of days I had the phone. I haven`t installed anything on the phone yet. Are there more people that have this problem?
Maybe it's a problem with other software? Does this happen directly after a hard reset? Mine plays a sound upon receiving a message...
have the same problem. but do not know if this started when i changed the melody for the message to one that is on the memory card.
have not tried hard reset yet to see f it helps
Do not store ringtones on the memory card, when the phone goes into standby it turns off the SD card interface to save power. The same goes for any programs that you want to keep running in the background when the phone goes into standby.
i face the same problem.... likely is the ROM problem..
not only that bluetooth also have some problem...
Are you using any call blocking / filtering software? Just a thought as I had the same issue after installing Magicall.
The device is as clean as a whistle
I haven`t installed any 3rd party software of any kind. I believe it is a flaw in the software. Perhaps this will be fixed a the next rom-update.
I also have this problem now. Yesterday I got an important SMS, but did know about it until 30 min later when I clicked the standby-key. The wierd thing is that this does not happen all the time. Usually I get notified within a few minutes of a new message. I do not have my sound files on the storage card. Any ideas how to solve this?
I get this problem too, and its rather annoying.. you could try setting the phone to wake on SMS, however, depending on your lock settings, it will probably wake up unlocked even if it was locked. I like my phone to be locked at all times unless I unlock manually or I get a call ONLY.
The reg key is
HKLM\Drivers\BuiltIn\RIL\DisableSMSWakeUpEvent=0
Craig
Edit: if you go into Sound -> Notifications -> Messenging: New Text Message and ensure "Display Message On Screen" is unticked, it stays locked when a msg is received
i have this problem but with a hardreset solve my problem
Im having the same problem, ive got all the alert tones saved in the phone memory and have tried a hard reset too.
The reset improved things but still getting some messages being received without the alert sound being played, im assuming its a fault as several people are having the same trouble.
I got exactly the same
It seems that the problem only occures when you're not in the home screen. When i'm in the front (home) screen the sound works fine. But if i'm in the contact look (personalized look) its silent.
Can someone confirm this?
The same problem also with vibration....
It must be a softwareflaw, i can`t wait till HTC gives the first rom update...
Does somebody know how long it took before the first rom for the diamond 1 came available after its release?
I've only used Radio 3.44.25.27 from the new HTC Asia ROM for a day so I can't be sure, but the random problem of no audio/vibration alert that I used to face with Radio 3.43.25.19 seems to have gone away.
Having the same problem except mine plays the tone but doesnt vibrate!!!
Any news about this topic?
I had this problem also until I enabled SMS wakeup as per craiglay's post
These things should be fixed by HTC if u ask me. Workaround is great but I;ll wait till a hotfix is released
Hi all,
Since 2 days i have a Touch diamond 2, i hard SPLed it and flashed serveral roms and i liked the Energy rom the most so thats on it now. now my problem is nomatter wich rom it can't standby properly.
If i press the power button (to put it in standby) it wakes op 3 seconds later or so. it doesn't happen every time but it happens often.
What to do about this??
Greetings
Try this cab.
Also, make sure you're hard resetting after reach flash or previous settings could be retained.
what does the cab do? cause it locks thats not the problem only problem is it won't stay in standby every time.
Sets it to autolock.
You probably changed a registry setting when you installed those tweaks, so this will hopefully restore it.
i tried the cab and it doesnt fix my problem i already told you it locks fine when i put it on standby it only wakes up by itself...
WcEendje said:
i tried the cab and it doesnt fix my problem i already told you it locks fine when i put it on standby it only wakes up by itself...
Click to expand...
Click to collapse
There are other power settings in the cab from my registry and I do not have this problem so I thought it may solve your issue.
You probably need to hard reset.