Related
Hello folks: sad day...
My PDA2k's screen started to not respond to touch all of a sudden. I tried a soft reset, and then a hard reset. This does not fix it. Of course, now I am stuck at the Windows Mobile start screen (the one that says "tap your screen to set up your Pocket PC"), and of course I cannot make it any further than that.
Any help you can think of? I am trying to get a hold of imate tech support, but the prospect of having to send it away for repair is really frightening.
Thanks in advance for any advice.
Fernando
i have the exact same problem now..
please help??????
did u manage to fix it?
Pockets of air under the screen protector and/or mis alignment of the screen protector can sometimes cause a touch screen to stop responding.
So if u have one applied, try taking it off to see if that fixes the problem.
tried that..not the case..still isnt working
Hay I have same problems litle diferents bat same.
Das anybody have idea vats happened. In my BA, half display doesn’t work (left) right side work.
Incense I perform hard reset system hold in tach scrin and cursor in right side work perfectly in left side work only
if I put pensile 5-6 sec. and again etc.System is that point hold and doesn’t work butscrin.
Thanks for your tips. My touch screen went dead on my BA over christmas. I was about to junk it until I peeled off the protector skin as suggested. Now it is working. Thanks mate
I got this problem yesteday, so i desided to try disassemble, my blue angel to check how deficult it would be to change the touch panel before i cheked the price on these panels. It showed to be a little hard to take it of, so i just assembled the "angel" agian, and miracules the touch now works fine, and I only adjusted the cable a little, but maybe this made the connection better. But on the hole I'm glad that I put it together agian before I bought a new panel.
Unfortunately I don't know exactly what did the trick. But it may be worthwhile to disassemble and try to make the cables sit a little better, and then just wish for the best outcome, of course if you are not sure how to disassemble divices like these do not do it, as it can make more damage to your blue angel, so even a professional technican can't save it.
suggestion
i had this problem but if you already back up your system in a sgt file on your pc then you can connect your BA with activesync and restore your system i don't know if you have backup file
Hey guys I have flashed my Kaiser with a clean rom last night, everything went awesome, phoned work excellent just the way I wanted, and my hands were wet as the phone rang and now all of a sudden my Touch Screen doesnt work, nothing seems to be wrong with the phone itself, everything is still displayed on the screen.
Now I might need to send it back for repairs, but I reset to factory defaults couple min ago, and it says "Tap screen to begin" and I can't get any further?
Active sync or nothing works in that stage, how is it possible that I can flash my kaiser back to factory defaults if this is the case?
Isnt there a way of skipping that "Tap screen to begin" message?
Thanks a lot, any help is appreciated.
Gozzy69a said:
Hey guys I have flashed my Kaiser with a clean rom last night, everything went awesome, phoned work excellent just the way I wanted, and my hands were wet as the phone rang and now all of a sudden my Touch Screen doesnt work, nothing seems to be wrong with the phone itself, everything is still displayed on the screen.
Now I might need to send it back for repairs, but I reset to factory defaults couple min ago, and it says "Tap screen to begin" and I can't get any further?
Active sync or nothing works in that stage, how is it possible that I can flash my kaiser back to factory defaults if this is the case?
Isnt there a way of skipping that "Tap screen to begin" message?
Thanks a lot, any help is appreciated.
Click to expand...
Click to collapse
here you go:
http://forum.xda-developers.com/showthread.php?t=335568
Yo thanks man,
I have flashed my phone back to HTC's rom, touch screen still doesn't work, I can use the phone now again, I have skipped that process where it asks you to align the screen to begin with a program called Code Factory's Remote screen alignment (RSA)
Now I'm in Bahrain (middle east) at the moment, I bought the phone in South-Africa where I used to live, So I'm gonna have to use the phone for a while until I can send it in for repairs.
So just have one more problem, I can't seem to change the Main volume in the taskbar without using the touch screen, Is there any other way of changing the volume, coz I cant hear my phone when it rings at times.
Shot guys,
to adjust the volume, move the trackwheel up or down during a call, so you're gonna have to call someone.
as for vibrating, you've got me there
Man,that must be a pain that touch screen doesn't working.
Try googling MyMobiler, install on your PC, connect your PDA and it will autoinstall itself to your PDA too.
Run MyMobiler on the PC. Next thing you know you can control your PDA without even touching it at all ;-)
Cheers!
schizo said:
Man,that must be a pain that touch screen doesn't working.
Try googling MyMobiler, install on your PC, connect your PDA and it will autoinstall itself to your PDA too.
Run MyMobiler on the PC. Next thing you know you can control your PDA without even touching it at all ;-)
Cheers!
Click to expand...
Click to collapse
or get mDesktop form the net - it will give you remote desktop capabilities to your PDA + much more ....
yo guys, just wanna let u guys know, the problem sorted itself out, in the future if you guys experience the problem, put ur phone close to a TUBE T.V, and let the static fix it for u, I was busy trying to get this OLD t.v sorted out in the Hotel where we are living in Bahrain, and I couldn't see at the back, and I used my phone as a flash light to see what's going on lol, and then my Touch screen started working again.........anyone care to explain this..?
Phone is in complete working order again, happy flashing for me once again hehe.
Man, I had the same problem and I was quite desperate. I was going to replace my Vodafone 1615 (the brandized version of Tytn II) when I found your post.
I put the phone near a CRT Monitor and then magically the touch-screen was working again!
Thank you to disclose your experience.
Can anyone explain why this might work?
I had the same problems. Touched yesterday mine htc kaiser with wet fingers and the touch screen did not respond. I thought that is the same problem with humidity that I had in Amazonia. That time it got solved by heating the phone with notebook. Pillow - kaiser - notebook for few hours :-D
But this time heating did not work... With doubt I approached old CRT tv and static energy from it SOLVED mine problem too. I am happy that I did not throw it away after buying LCD one. This is the time when new technology needs some old school energy :-D
rdee said:
With doubt I approached old CRT tv and static energy from it SOLVED mine problem too. I am happy that I did not throw it away after buying LCD one. This is the time when new technology needs some old school energy :-D
Click to expand...
Click to collapse
Did you have the phone off or on , did you touch it to the screen or side of tv, and how long did you hold the phone there, this would be awesome if it works, I've been freaking out the last couple of days.
me too! i brushed my phone around the tv for 30 seconds.. no luck...
ardley216 said:
me too! i brushed my phone around the tv for 30 seconds.. no luck...
Click to expand...
Click to collapse
I think we were fooled.
bwnotredame06 said:
I think we were fooled.
Click to expand...
Click to collapse
Static can kill touch screens
I killed my old WM2003 device by sliding down a plastic slide with my kids at the park.
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
parmito said:
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
Click to expand...
Click to collapse
thank you so much for taking the time to post your solution! My kaiser was dead after it got soaked in vinegair..keys were sticky, device wouldnt charge or even turn on..
what i did is put the kaiser in a bowl of water and let it rest for a few hours. Then i took it out and put it in a bowl of uncooked rice (rice sucks up water!) and let it rest overnight. My kaiser came out great with everything working fine except....the touchscreen wouldnt respond. I flashed several roms but all to no avail.
I then followed your instructions and miraculously this strange at&t rom brought my touchscreen back to life!
So thanks again
As you can read, I got my diamond back from the factory, it was completely unusable, but they upgraded software for me, so when I came home and startet my diamond, It looked like everything worked and it was even reacting faster.
But, then I realized that the circle around the "enter" button isnt working.. If Im taking a picture and want to zoom, my phone doesnt react when i move my finger round the circle nor it works in Opera when I try to zoom.
What can the problem be?
Edit/Delete Message
bump pls
before i got my Acer F900, i dont like it that much since it' the bigger size then HTC HD or iphone. but after i got the phone, i dont notice that much different in size. haha
there is no d-pad on the phone, u press the volume + and - to go up and down. i still havnt figure out how to go left or right yet.
there is a green led blinking when the phone is on which i like, that u dont see that often on htc phones anymore? haha
i believer Acer tweaks (software) is better then HTC!
their task manger show how many Free Ram is avail, i guess you need it since phone only got 128ram. but i havnt encounter any problems with only 128ram.
their flash rom is kinda low, only 256meg, i always run out of storage if i want to install everything to internal storage (i never have this problem with Sony X1, or diamond, or fuses) but you can install most programs to microSD.
when phone is "device locked" on today screen, you press screen to wake up to check clock, phone goes back to sleep in 5 seconds (which is nice) to save battery.
on phone dialer, there is a "blacklight off" option for 5, 10, 15, 30 seconds, never. on my sony X1 with custom rom, phone dialer stay ON forever unless i press "power" to turn off blacklight.
PRO: big screen 3.8" WVGA 800x480!
ATT 850 and 1900mzh 3G !!
thin compares to phones with qwerty keboard (f900 got no keyboard)
CON: i dont like the action/enter button on top right corner (near volume buttons), i have to reach all the way up there if i want to press enter! i perfer it at buttom of screen like other phones!
no 3.5mm jack.
not sexy! just look like any other phones, my silver sony X1 is sexy! haha
conclusion: get this phone if you want big screen (3.8" WVGA) and USA 850/1900 3G! other phones with big screen only have 1900 3G, not 850.
if you a sexy phone, get silver sony x1!, but with smaller 3.0" WVGA screen.
sounds good..what CPU / mhz is on board?
also, does it feel fast or lagging?
Samsung 533mzh, currently all htc phones is at 528mzh.
good thing Acer put their rom on website already.
just did a reflash rom, screen is not responding after installed some programs.
try to do a hardreset, manual said power + reset, then action button.
where the [email protected]#$ is "action" button? i dont see no "action button", tried all other button, it not working. so i reflash the rom.
A couple of problems with my Acer F900... Other people?
I got my Acer F900 just yesterday from Expansys. I'm happy to report that the phone works very well on the US AT&T UMTS network.
I'm less happy to report a couple of very annoying problems:
1) When the device is powered off (with the button on its left side), it can't be turned back on. Actually, the power seems to come back since I can see the power LED start to blink but the screen is never re-activated. The only way I've found to re-activate the screen is to reset the device.
2) A minor problem is the Comm Setup Wizard's database lists old settings for AT&T's network. I can enter the information manually. Much more important is that every time I reset the device (quite often because of problem #1), the phone forgets the connection settings and I have to re-enter them.
I suspect that the problem behind #2 is a startup program in the registry that doesn't get cleared out. There are several start up programs listed (according to MemMaid) and I'm hesistant to just stop them all without some guidance.
I'm running ROM 1.02, the latest according to Acer's site. I haven't tried reflashing the ROM because that's kind of a pain and it seems to be the same version.
As for #1, I have no idea what the problem is. Has anyone run across something similar?
Also, does anyone know of forums specifically for the Acer F900? I realize that this is off-topic for xda.
Thanks!
Mark
#1: setting -> system -> backlight -> backlight level, make sure
auto-adjust backlight by battery level
and
auto adjust backlight by idle time ARE CHECKED.
2. setting -> connections ->connections -> advanced -> select networks, make sure both box says "MY ISP", then press ok
Well, half of the problem is fixed. The phone no longer loses the AT&T data settings every time I reset, but I still need to reset every time the phone turns off.
Thanks for the backlight level but it doesn't seem to do the trick. I'm convinced the problem isn't a screen brightness issue. When the phone is off, it doesn't receive text messages or phone calls. Any idea what the problem might be? Do you think it could be a hardware problem?
netnerd said:
...there is no d-pad on the phone, u press the volume + and - to go up and down. i still havnt figure out how to go left or right yet....
Click to expand...
Click to collapse
Hi, and thanks for your review, does this mean that the F900 has some “sort of” scroll wheel?
depp2web said:
Hi, and thanks for your review, does this mean that the F900 has some “sort of” scroll wheel?
Click to expand...
Click to collapse
F900 has no scroll wheel.
M900 with qwerty keyboard DOES.
markaddleman said:
. When the phone is off, it doesn't receive text messages or phone calls. Any idea what the problem might be? Do you think it could be a hardware problem?
Click to expand...
Click to collapse
phone is off? dont u mean when backlight goes off? if u cant receive SMS or phone calls, usually the phone is freezed or locked up.
also try setting ->system -> power, on Key Lock the box should be BLANK.
netnerd said:
F900 has no scroll wheel.
M900 with qwerty keyboard DOES.
Click to expand...
Click to collapse
one more try:
the F900 has some + & - keys on the side, do they move the selection (eg. in a menu, scroll up/down in the browser etc.) or do they just change the volume?
netnerd -
Thanks for your help but I've decided to return the device to expansys for an exchange. I hope I don't have this problem with the next one!
Mark
depp2web said:
one more try:
the F900 has some + & - keys on the side, do they move the selection (eg. in a menu, scroll up/down in the browser etc.) or do they just change the volume?
Click to expand...
Click to collapse
yes, the + and - button move up and down (scroll up/down, phone volume).
when in browser, it moves 1 line at a time, maybe there is a registry setting to make it move 1 page at a time.
but there is no button to move left or right.
netnerd said:
yes, the + and - button move up and down (scroll up/down, phone volume).
when in browser, it moves 1 line at a time, maybe there is a registry setting to make it move 1 page at a time.
but there is no button to move left or right.
Click to expand...
Click to collapse
Sounds like good news for me!
Up / down is enough for me, at the moment I'm using a winmobphone with keyboard, dpad and scroll wheel, and I just need the scroll/up down feature, so it's Ok to lose some weight
Btw: at least the opera browser can be configured to scroll one page at a time
Thx again for your answers
Acer F900, need help
netnerd said:
before i got my Acer F900, i dont like it that much since it' the bigger size then HTC HD or iphone. but after i got the phone, i dont notice that much different in size. haha
there is no d-pad on the phone, u press the volume + and - to go up and down. i still havnt figure out how to go left or right yet.
there is a green led blinking when the phone is on which i like, that u dont see that often on htc phones anymore? haha
i believer Acer tweaks (software) is better then HTC!
their task manger show how many Free Ram is avail, i guess you need it since phone only got 128ram. but i havnt encounter any problems with only 128ram.
their flash rom is kinda low, only 256meg, i always run out of storage if i want to install everything to internal storage (i never have this problem with Sony X1, or diamond, or fuses) but you can install most programs to microSD.
when phone is "device locked" on today screen, you press screen to wake up to check clock, phone goes back to sleep in 5 seconds (which is nice) to save battery.
on phone dialer, there is a "blacklight off" option for 5, 10, 15, 30 seconds, never. on my sony X1 with custom rom, phone dialer stay ON forever unless i press "power" to turn off blacklight.
PRO: big screen 3.8" WVGA 800x480!
ATT 850 and 1900mzh 3G !!
thin compares to phones with qwerty keboard (f900 got no keyboard)
CON: i dont like the action/enter button on top right corner (near volume buttons), i have to reach all the way up there if i want to press enter! i perfer it at buttom of screen like other phones!
no 3.5mm jack.
not sexy! just look like any other phones, my silver sony X1 is sexy! haha
conclusion: get this phone if you want big screen (3.8" WVGA) and USA 850/1900 3G! other phones with big screen only have 1900 3G, not 850.
if you a sexy phone, get silver sony x1!, but with smaller 3.0" WVGA screen.
Click to expand...
Click to collapse
Hello,
I just got my Acer F900 and phone works (on USA ATT network) but internet does not, copied settings from my old phone(HP iPAQ) to Acer to no avail.
Settings are:
HTTP: wireles,cingular.com:80
WAP: 66.209.11.61:9201
Secure WAP: 66.209.11.61:9203
Socks: localhost:1080
Could you pls tell me what the correct settings should be?
Thx.
i'm on the really old ATT (blue), i just use "proxy" for access point name.
greetings
i have two questions please
how do u switch from the matrix view to the 3d view of the acer shell please???
are there any good forums like xda for the acer phones? i mean, similar, that good wont exist im sure
Hi, since I use no shell at all , I can't answer the 1st question
but I'm sure you will get some help here:
http://www.4winmobile.com/forums/e-ten-acer-support/
or
http://www.eten-users.eu/
I got a couple of questions for you.
Does the F900 feel big?
Im considering getting the m900 for the keyboard.
How much was it?
flyboyovyick2k9 said:
I got a couple of questions for you.
Does the F900 feel big?
Im considering getting the m900 for the keyboard.
How much was it?
Click to expand...
Click to collapse
Hi, if you like to hear some anwers from me:
No, it doesn't feel big to me, my previous phone with keyboard was much thicker, but I don't need the keyboard, so I bought one with out.
I paid over 400€ for it, I'm sure it's quite cheaper now, but wouldn't buy it anymore, there are much cooler phone out now, like the acer neotouch or the htc touch hd2.
jhaquo said:
how do u switch from the matrix view to the 3d view of the acer shell please???
Click to expand...
Click to collapse
swipe up or down
Hello,
I'm not really sure if anyone encountered this before..
Suddenly today in the morning, I notice my Milestone's touchscreen is acting up.
I can't reach the menu button at the bottom of the screen. It always chooses Phone or Web Browser button instead :/
I use search to get to Dev Tools and Pointer Locations, and I realize there's a segment, about 1 third of the touchscreen, in the middle, unresponsive to touch.
I tried cleaning the screen, clearing cache, rebooting, it made it work temporarily, but then it returned again. I changed to stock 2.1 SBF, still no change. And now, its stuck in this state, I can't get it to work even temporarily..
I really dont want to send it to Customer Service, is there anyway to solve this?
Thanks!
Lesiroth said:
Hello,
I'm not really sure if anyone encountered this before..
Suddenly today in the morning, I notice my Milestone's touchscreen is acting up.
I can't reach the menu button at the bottom of the screen. It always chooses Phone or Web Browser button instead :/
I use search to get to Dev Tools and Pointer Locations, and I realize there's a segment, about 1 third of the touchscreen, in the middle, unresponsive to touch.
I tried cleaning the screen, clearing cache, rebooting, it made it work temporarily, but then it returned again. I changed to stock 2.1 SBF, still no change. And now, its stuck in this state, I can't get it to work even temporarily..
I really dont want to send it to Customer Service, is there anyway to solve this?
Thanks!
Click to expand...
Click to collapse
Same with me, i can't reach from menu in a bottom side to upper side, maybe 10mm dead space + 7mm right side from bottom side to upper side.
Please help me!!
Sorry my english is not good
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
bietoff0728 said:
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
Click to expand...
Click to collapse
thanks but no fix it for my phone
I had the same problem sometime last year, which I eventually fixed by clearing cache partition and rebooting a bunch of times.
Unfortunately, the problem re-appeared today. So far, rebooting and clearing cache hasn't worked.
By any chance, have any of you installed the WiiMote Controller App? I was convinced that was what was doing it to my phone. (maybe not, as I never re-installed it though)
I'm about to flash the sbf file, but as Lesiroth said, that might not work
i believe u r having GHOST TOUCHSCREEN syndrome
my touchscreen sometime do not response to my touch
it just went berserk!
the notification bar keep sliding up and down
if im in the menu, it goes up and down too!
sometime i cant unlock the screen bcos it do not respon
however, some chinese users found that this could be due to ripped/ torn ribbon
just google it
it is widely reported too!
I just want to say that I have fixed my Droid's touchscreen problem (or maybe it will re-appear in another six months).
Anyway, I just set the screen brightness to max and screen timeout to 30min and let the battery drain. I took the battery out for a second and then charged the phone with the USB that came with the phone over the wall socket.
I think the USB wire is the culprit (I was using a BB one for a while).
haroldz123 said:
i believe u r having GHOST TOUCHSCREEN syndrome
my touchscreen sometime do not response to my touch
it just went berserk!
the notification bar keep sliding up and down
if im in the menu, it goes up and down too!
sometime i cant unlock the screen bcos it do not respon
however, some chinese users found that this could be due to ripped/ torn ribbon
just google it
it is widely reported too!
Click to expand...
Click to collapse
my problem seemed to be disappeared after i soft reset n use stock rom
i tot launcher pro was the culprit but it is not
so i re-install LP n use for 1 day
d only problem i had was when i went for a jog, i tucked it on my waist (no in the pocket).
after that the screen stop working at all, i have to reboot by taking the battery a few time.
after 30 min or more, the problem was gone.
tis could be due to the stress applied to the screen when im joggin (as it it as "touched" while im jogging).
however, i removed beautiful widget n its addon too, dat could the source of the problem as well.
SOLUTION: soft reset, use stock rom / launcher for 1 day
if it still persist, it could a hardware problem
jtnw said:
I just want to say that I have fixed my Droid's touchscreen problem (or maybe it will re-appear in another six months).
Anyway, I just set the screen brightness to max and screen timeout to 30min and let the battery drain. I took the battery out for a second and then charged the phone with the USB that came with the phone over the wall socket.
I think the USB wire is the culprit (I was using a BB one for a while).
Click to expand...
Click to collapse
I am glad that you solved your problem. Unfortuntely the past week or so has been a really busy time for me, I could not focus on this problem. I will try your solution, although I still think it is a broken digitizer on my part.
maybe the problem is the digitizer..
try to change rom or wipe it first..
if the problem still persist i think its the digitizer..
use only the original charger..
OMFG that worked on my phone!!!
bietoff0728 said:
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
Click to expand...
Click to collapse
----------------------------------------------------------------
A segment of my phone covering the home button went dead two weeks ago.. and duuuuude did this work!! its super smooth as ever!!! thanks a ton!!
Mine did the same exact thing! The entire strip from the home button to the top of the screen no longer works!
Sent from my SAMSUNG-SGH-I777 using XDA App
silverslasher said:
Mine did the same exact thing! The entire strip from the home button to the top of the screen no longer works!
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance