I am using Windows Vista SP1 (32bit)..I have a wizard (Imate K-jam) spl /ipl 2.26 It has the T-mobile wm5 running on it ... I would like to upgrade to WM6.
It used to be a straight forward process on Windows XP, however now in Vista i am having many errors while trying to upgrade it. I have looked around and found some thread which advice to Run the RUU as Administrator, and others which makes you download some new RUU, etc..
I would really apreciate it if someone could give a step-by-step process for upgrading an out of the box wizard from wm5 to wm6, under Windows Vista. Or maybe point to a thread that solves this issue.
Thanks
replace the ruu with muns ruu, you can find it in the wiki. Then it should be fine, i have found that when i flash the wizard, i just right click on the ruu_wrapper and click run as administrator then the flash works fine. Make sure you have the latest WMDC installed too
Also have you tried entering bootloader manually then trying to flash the wizard.
Also have you actually CID unlocked it? I am guessing you have though
but you never know
EDIT: zabardast_1 posted it as an attachment in another thread so heres the link for muns ruu
http://forum.xda-developers.com/attachment.php?attachmentid=92811&d=1213528661
Thanks man, however i cant try it untill i get back from work! Hopefully the Mun RUU will work coz i have tried all of the other methods you pointed out.
Thanks again bro
WinXP is highly recommended for flashing,however,its possible with vista,read this guide,hope it'll help :-
http://www.anichillus.net/index.php?topic=21.0
Related
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Version
Is it version 2.6?
robjae said:
Is it version 2.6?
Click to expand...
Click to collapse
no......... but it works with vista with the original rom.
Tmo
There is a 2.6 on the T-Mobile site for the MDA.
faria said:
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Click to expand...
Click to collapse
Faria, I dont know how to remove the coutry id check but will be great if you upload it to the ftp for those that have problems(like me) using old ruu in vista.
Thanks.
XP OS & Vista OS
I have not been successful in getting this to work in Vista OS, so I just created a partition and installed XP as second OS. Hey, it works until bugs worked out of Vista.
XP OS & Vista OS
I have not been successful in getting this to work in Vista OS, so I just created a partition and installed XP as second OS. Hey, it works until bugs worked out of Vista.
Hi Faria!
Just to let you know that I've just contacted the guys at I-mate regarding this problem and they said there's already one version coming soon.
Hope it does not take so long!
Regards,
RUU from Cingular
I can flash my phone with Vista, with the offical Cingular 2.25 (which uses RUU 2.5.2) ROM. When I replace the nk.nbf, it can't open the file. Maybe this helps. If anyone knows what the RUU looks for in the rom file, maybe we could fix it.
Did you tried tools than enable all buttons of an application ? (I've done than quite a long time ago and it worked) ?
EDIT : have a look at http://www.angelfire.com/falcon/speedload/Enabler.htm
any luck on this?
faria said:
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Click to expand...
Click to collapse
could u please give me the vista update utility?
Does anyone know of or have an RUU version that works on Windows Vista? The version included in the "Update your phone on Widows Vista" thread doesn't work. It gives a "this utility is out of date" error every time.
Note that the driver instructions given in the above thread work perfectly! However, Vista users are still stuck without a working RUU.
I've searched through these forums and beyond, but haven't been able to find a solution. All of the other RUU's posted here fail, as does the RUU I extracted from AT&T's latest update for the Wizard (which is not a WM6 update, I know. I just tried the RUU that's in the update.)
I'm able to update my Hermes on Vista all the time, using RUU Wrapper. However, the only method I've gotten to work for my Wizard is ShellTool. That, however, fails about 75% of the time, so I have no reliable way to update my Wizard. I don't have access to an XP system, and dual booting my desktop is out the question.
Any help would be greatly appreciated! Thanks!
Exactly the same problem. Help would be appreciated
same here -.-
Has anyone found a way to upgrade to any WM6 ROMs on Windows Vista? I'm sorta at my wits end here!
In the Wizard Upgrading forum there is a thread "Upgrading your phone on Windows Vista". The driver instructions (which are really well written) work perfectly, but the RUU version fails with an "out of date" error.
There have been a number of other RUU versions suggested, but they all crash on Vista.
Shelltool works on Vista only about 25% of the time. Usually it just starts the flash process and hangs indefinitely. I was able to successfully flash XM6r4, but since then nothing else I've tried has worked. I did go back to the latest AT&T ROM afterwards, but haven't been able to get back to WM6 since. One of the things I tried was extracting the RUU from Cingular's update, but that one didn't work either, which confuses me even more!
All of the RUU Wrapper versions I've used to flash my Hermes work great on Vista, yet none of the RUU versions seem to be able to do so on my G4 Wizard (Cingular 8125).
Please, if anyone has any suggestions, I'd really appreciate them! I've searched and searched through the forums for different methods and versions, but have come up empty handed.
FWIW, I don't have access to an XP machine, and dual booting is not an option for me.
Thanks!
Dual Boot!
I just ended up dual booting XP, I noticed you said it was not an option, but did you know you can do it without reformatting through computer management in Vista?
Vista RUU
dktech said:
I just ended up dual booting XP, I noticed you said it was not an option, but did you know you can do it without reformatting through computer management in Vista?
Click to expand...
Click to collapse
Yep! Unfortunately that's not an option either. It's a matter of resources. I'm stuck with Vista, on which, I should point out, I can upgrade my Hermes successfully 100% of the time!
The RUU versions used to flash .nbh format ROMs to my Hermes all work, yet the older versions which take the .nbf format ROMs used by the Wizard don't!
There's got to be some solution. Using Shelltool usually works, but that only flashes the OS, not the ExtROM, splash screen, etc, so it's really only part of the solution.
Hmm i myself had some problems with flashing using Windows Vista. here are some observations i had
1) i first flashed using the origional tmobile rom (3.08 spl/ipl with 2.69 radio) i flashed it without doing anything special besides putting it in bootloader mode
2) next when i tried flashing it with a cooked rom it wouldnt work ( again i just tried to flash from bootloader mode without following any of the instructions givin in the Upgrading with Windows Vista thread)i found the RUUupdater version to be 2.0?? ( im sorry i forget the exact version numbers)
3) On checking the RUUupdater of the Tmobile that worked i found it to be 2.5???( again i forget teh exact version but suffice it to say it was newer)
4) i copyed the cooked rom nbk files to the Tmobile origional rom folder ( the one that worked on updating) but unfortunatly it wouldnt work
5) i then went to the thread and downloaded the drivers and installed them as the instructions said i should
6) i then downloaded the VistaRUU file they had there and then copyed the nbk files to that folder and VIOLA i flashed it and it worked like a charm ( again i flashed in bootloader mode)
This was just my experiance hopefully someone can figure out what i did right and why it worked for me and hopefully make it work for everyone else having problems
I thought there was a thread somewhere here about how to use Vista...if I remember, it may have even been stickied.
There was a stiki but it seems to have been unstikied and has since gone outta sight
Was this the thread??
It is still stickied if it is the thread.
I don't use Vista, so I haven't really read through it.
http://forum.xda-developers.com/showthread.php?t=338473
docnas said:
Hmm i myself had some problems with flashing using Windows Vista. here are some observations i had
1) i first flashed using the origional tmobile rom (3.08 spl/ipl with 2.69 radio) i flashed it without doing anything special besides putting it in bootloader mode
2) next when i tried flashing it with a cooked rom it wouldnt work ( again i just tried to flash from bootloader mode without following any of the instructions givin in the Upgrading with Windows Vista thread)i found the RUUupdater version to be 2.0?? ( im sorry i forget the exact version numbers)
3) On checking the RUUupdater of the Tmobile that worked i found it to be 2.5???( again i forget teh exact version but suffice it to say it was newer)
4) i copyed the cooked rom nbk files to the Tmobile origional rom folder ( the one that worked on updating) but unfortunatly it wouldnt work
5) i then went to the thread and downloaded the drivers and installed them as the instructions said i should
6) i then downloaded the VistaRUU file they had there and then copyed the nbk files to that folder and VIOLA i flashed it and it worked like a charm ( again i flashed in bootloader mode)
This was just my experiance hopefully someone can figure out what i did right and why it worked for me and hopefully make it work for everyone else having problems
Click to expand...
Click to collapse
What do you mean by putting the phone in bootloader mode first? In my experience, the phone has to be booted fully in order for the RUUs to work. Is there a way to get it to recognize the phone if it's already in bootloader mode?
If I put the phone in bootloader mode and then run RUU, the RUU just comes back and says it can't talk to the phone.
FWIW, I did the same as you, as far as flashing the original (Cingular) ROM and trying to use the RUU that came with that update. It seems that those RUUs won't work with any other ROMs.
Thanks for any help!
akashastrega said:
Was this the thread??
It is still stickied if it is the thread.
I don't use Vista, so I haven't really read through it.
http://forum.xda-developers.com/showthread.php?t=338473
Click to expand...
Click to collapse
Yep, that's the one! Been through it. As I mentioned above, the driver instructions in that thread are required when using Vista, but the RUU doesn't work.
Other than docnas here, everyone else has had the same problem as me. The Vista RUU comes back and complains that it's out of date.
I'd like to figure out what docnas did differently to get it to work. BTW, what version of Vista were you using? 32 or 64 bit? Mine is 64.
I'd also like to find out how it worked with the phone already in bootloader mode, since everyone says (and my experience has shown) that the phone needs to be booted and synced before the RUU will talk to the phone.
This may all be too late for me anyway. I'm giving my old Cingular 8125 to a friend, which is why I've been updating it. Unfortunately (or fortunately? ), once she has it, I'll only be working with my ATT 8525, which I can update and work with without any of the problems I've had with the Wizard.
I have only successfully flashed my wizard in Vista using shelltool. This is not the best way to do it I want to use the RUU. So anyways is it possible to? I have used the sticky to change your drivers to the xp active sync ones. this works great however when I try to use the softspl or hardspl methods to flash to my locked device they crash. has anyone successfully done this on a vista computer? I have tried many RUU tools and I cannot get it to work. Vista kills HardSPl when the RUU is searching for data on my Wizard. and the same goes for softspl. I hate vista right now!!! I think I just need a new RUU that works.
I ave read the site a lot and have a major problem. I am unable to flash a new ROM. I know the problem is the SPL but am unable to update the SPL with neither HSPL nor a USPL.
To give some info, I am on Windows XP, Windows Mobile Decive Centre 6.1 (installeed, uninstalled and reinstalled a zillion times now). I have even tried updating a RRU driver ripped off from Activesync 4.5 but nothing really works. I do ave .NET 4.5 installed on my PC so that isn't a concern either.
Can you guys please help me and suggest a solution.
Thanks a lot for all your help in advance.
R
did u try by flashing your HD by SD Card I always do it that way my self and always works very good
handsome303 said:
I ave read the site a lot and have a major problem. I am unable to flash a new ROM. I know the problem is the SPL but am unable to update the SPL with neither HSPL nor a USPL.
To give some info, I am on Windows XP, Windows Mobile Decive Centre 6.1 (installeed, uninstalled and reinstalled a zillion times now). I have even tried updating a RRU driver ripped off from Activesync 4.5 but nothing really works. I do ave .NET 4.5 installed on my PC so that isn't a concern either.
Can you guys please help me and suggest a solution.
Thanks a lot for all your help in advance.
R
Click to expand...
Click to collapse
focus on one flash method, and concentrate to find out where you are doing wrong or what.
i suggest USPL 2.5, start in the Dummies guide here :
http://forum.xda-developers.com/showthread.php?t=505377
as you have windows xp, download the drivers here to update your sync driver :
http://forum.xda-developers.com/showthread.php?t=524619
and here is the procedure to actually update your sync driver: http://forum.xda-developers.com/showpost.php?p=3932818&postcount=2
going back to the first link i presented to you, download and unzip USPL GUI 2.5.zip to a memorable area in you pc. (I suggest you create a special folder, name it Blackstone Flashing, or whatever memorable term comes to your mind)