ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Version
Is it version 2.6?
robjae said:
Is it version 2.6?
Click to expand...
Click to collapse
no......... but it works with vista with the original rom.
Tmo
There is a 2.6 on the T-Mobile site for the MDA.
faria said:
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Click to expand...
Click to collapse
Faria, I dont know how to remove the coutry id check but will be great if you upload it to the ftp for those that have problems(like me) using old ruu in vista.
Thanks.
XP OS & Vista OS
I have not been successful in getting this to work in Vista OS, so I just created a partition and installed XP as second OS. Hey, it works until bugs worked out of Vista.
XP OS & Vista OS
I have not been successful in getting this to work in Vista OS, so I just created a partition and installed XP as second OS. Hey, it works until bugs worked out of Vista.
Hi Faria!
Just to let you know that I've just contacted the guys at I-mate regarding this problem and they said there's already one version coming soon.
Hope it does not take so long!
Regards,
RUU from Cingular
I can flash my phone with Vista, with the offical Cingular 2.25 (which uses RUU 2.5.2) ROM. When I replace the nk.nbf, it can't open the file. Maybe this helps. If anyone knows what the RUU looks for in the rom file, maybe we could fix it.
Did you tried tools than enable all buttons of an application ? (I've done than quite a long time ago and it worked) ?
EDIT : have a look at http://www.angelfire.com/falcon/speedload/Enabler.htm
any luck on this?
faria said:
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Click to expand...
Click to collapse
could u please give me the vista update utility?
Related
Hello! I talked to xplode about this and he had no clue what could it be...
soul_train said:
...When I run Device Software Update Utility I go to next. It finishes with updating info I go to next. And then it says "This ROM update does not design for your device, please get a proper ROM upgrade and thry again...
Click to expand...
Click to collapse
-------------
xplode said:
Strange, works fine here, try to repeat the procedure afterall you upgrade with noid, it is not likely to get error like this
Click to expand...
Click to collapse
Don't know where is the problem. I have Helmis 1.4 3.5AKU... I have thryed both new WM-s and On both I get the same problem. So if anyone knows help would be appreciated. Thanks!
Soul Train
I got the same error message. I tried to change operater, but that didn't do the trick, so I'm still on the case
Edit: I'm normaly using Windows Vista, but I still have my XP installation, so I tried to boot in XP an run the upgrade from there. This worked fine, so mayby it's a problem with Vista althroug it should work. So my best advice is to try reboot you system, i know it's not alot of people who runs dual boot systems as standart
hagsted said:
I got the same error message. I tried to change operater, but that didn't do the trick, so I'm still on the case
Click to expand...
Click to collapse
What WM do you have? Shoud I try to Revert back to Wm2003 and try like that?
I upgraded from Helmi's Aku 3.2 to Xplore's 3.5 R4. If you have the posibility, try to connect your BA to anothor PC and run the update from there, I think it's a problem caused by Windows on the specific pc.
I am using Windows Vista SP1 (32bit)..I have a wizard (Imate K-jam) spl /ipl 2.26 It has the T-mobile wm5 running on it ... I would like to upgrade to WM6.
It used to be a straight forward process on Windows XP, however now in Vista i am having many errors while trying to upgrade it. I have looked around and found some thread which advice to Run the RUU as Administrator, and others which makes you download some new RUU, etc..
I would really apreciate it if someone could give a step-by-step process for upgrading an out of the box wizard from wm5 to wm6, under Windows Vista. Or maybe point to a thread that solves this issue.
Thanks
replace the ruu with muns ruu, you can find it in the wiki. Then it should be fine, i have found that when i flash the wizard, i just right click on the ruu_wrapper and click run as administrator then the flash works fine. Make sure you have the latest WMDC installed too
Also have you tried entering bootloader manually then trying to flash the wizard.
Also have you actually CID unlocked it? I am guessing you have though
but you never know
EDIT: zabardast_1 posted it as an attachment in another thread so heres the link for muns ruu
http://forum.xda-developers.com/attachment.php?attachmentid=92811&d=1213528661
Thanks man, however i cant try it untill i get back from work! Hopefully the Mun RUU will work coz i have tried all of the other methods you pointed out.
Thanks again bro
WinXP is highly recommended for flashing,however,its possible with vista,read this guide,hope it'll help :-
http://www.anichillus.net/index.php?topic=21.0
i try all these rom on this site n i always get errors on my wing n i cant use wm6.1 cuz i have windows xp can anybody help
windows xp has nothing to do with your phone. you just need to flash the rom using uspl just follow the instructions exactly as the site says and you shouldnt have a problem
guntcent said:
i try all these rom on this site n i always get errors on my wing n i cant use wm6.1 cuz i have windows xp can anybody help
Click to expand...
Click to collapse
just go to this link and follow the instructions EXACTLY.
http://forum.xda-developers.com/showthread.php?t=421304
what kind of error?
Hmm... upgrading..... from the beginning
fzzyrn said:
what kind of error?
Click to expand...
Click to collapse
@Fzzm and anyone who has personally upgraded:
So it doesn't matter if you have Vista or not, WM6 or higher still works with XP??
Also, is HTC upgrade good to start?? My phone is unlocked from HTC.
I have everything base original from the box with a few additives (nov 06 hera100) I just move around too much-military
Thanks ahead
answer to your question- no it does not matter
i think i've figured out whats happening.
Unlocked from HTC lets you use any gsm service provider, not install any rom. For that you need a cid-unlocked phone. To this end, we have two tools- USPL and HardSPL. Read the stickies in all the herald forums to get an idea of whats needed.
I am running windows mobile device center on a Vista 64 bit laptop.
I have a t-mobile wing that I got second hand. The wing has OpenTouch V7.6 BP WWE.
Here is the problem,
I am trieing to flash the rom to the latest T-Mobile update. When the flash starts the activesync connection drops and it never gets to even 2% done.
I have also tried to flash to different Ver. of OpenTouch and same thing.
Is this a problem with the phone or yet another Vista Issue...........
ANYONE !!!!!!!!!!!
omg! we have the same problem dude i wanted to flash the latest t-mo wing rom but then activesny drops and never installation progress never reach 2%.... will sum1 pliz help? i think this is not a small issue here pliz some1 help
I flash from vista 64 all the time run flash as Administrator
i can flash HERALD.ASerg.Clean2.WM61E.WWE and also HERALD.ASerg.9.WM61E.WWE.6pp(which i am currently using) but i cant flash the t-mos really need help pliz
Solution for flashing from Vista 64bit and postin only once
I do have the solution for your issues (specially looking the amount of posts you have done since your incorporation to XDA-Dev's):
1) Go to the top of the page, near to your username
2) Look the third link in the brown menu bar, from the right (LogOut, QuickLinks, ...)
3) That's right: this one which says "Search". Click on it.
4) Write "Flashing from Vista" in the combo which appeared
5) Read the issues with Vista and specially with Vista 64 bit or even XP 64 bit
6) You'll have the solution, and you'll have found it by yourself. That's to be proud !
6b) In some cases, you'll find it's too hard to flash from Vista and you need XP or the use of SD card ;-p
thanks buddy but actually i am using xp32. so now?
is your phone Hard spl?
wingmanbill said:
I am running windows mobile device center on a Vista 64 bit laptop.
I have a t-mobile wing that I got second hand. The wing has OpenTouch V7.6 BP WWE.
Here is the problem,
I am trieing to flash the rom to the latest T-Mobile update. When the flash starts the activesync connection drops and it never gets to even 2% done.
I have also tried to flash to different Ver. of OpenTouch and same thing.
Is this a problem with the phone or yet another Vista Issue...........
ANYONE !!!!!!!!!!!
Click to expand...
Click to collapse
That's not Win XP 32bit...
On the other side, if you use Win XP 32 bit, did you hard-SPL ? Can you put all the data about your device ? (SPL, Radio, etc.) so that we can know what is happening ?
afn691 said:
That's not Win XP 32bit...
On the other side, if you use Win XP 32 bit, did you hard-SPL ? Can you put all the data about your device ? (SPL, Radio, etc.) so that we can know what is happening ?
Click to expand...
Click to collapse
I too had trouble flashing the default ROM on my Wing. The secret is actually to open up the official RUU application, then search your Temp folder for two NBH's, the RUU_signed.nbh, and the SPL.nbh. You need to then copy them into the RUU folder of Flash Center, run that as administrator, and make sure to flash without SD card. That's the way that I used to restore mine to stock from Hard-SPL.
I ave read the site a lot and have a major problem. I am unable to flash a new ROM. I know the problem is the SPL but am unable to update the SPL with neither HSPL nor a USPL.
To give some info, I am on Windows XP, Windows Mobile Decive Centre 6.1 (installeed, uninstalled and reinstalled a zillion times now). I have even tried updating a RRU driver ripped off from Activesync 4.5 but nothing really works. I do ave .NET 4.5 installed on my PC so that isn't a concern either.
Can you guys please help me and suggest a solution.
Thanks a lot for all your help in advance.
R
did u try by flashing your HD by SD Card I always do it that way my self and always works very good
handsome303 said:
I ave read the site a lot and have a major problem. I am unable to flash a new ROM. I know the problem is the SPL but am unable to update the SPL with neither HSPL nor a USPL.
To give some info, I am on Windows XP, Windows Mobile Decive Centre 6.1 (installeed, uninstalled and reinstalled a zillion times now). I have even tried updating a RRU driver ripped off from Activesync 4.5 but nothing really works. I do ave .NET 4.5 installed on my PC so that isn't a concern either.
Can you guys please help me and suggest a solution.
Thanks a lot for all your help in advance.
R
Click to expand...
Click to collapse
focus on one flash method, and concentrate to find out where you are doing wrong or what.
i suggest USPL 2.5, start in the Dummies guide here :
http://forum.xda-developers.com/showthread.php?t=505377
as you have windows xp, download the drivers here to update your sync driver :
http://forum.xda-developers.com/showthread.php?t=524619
and here is the procedure to actually update your sync driver: http://forum.xda-developers.com/showpost.php?p=3932818&postcount=2
going back to the first link i presented to you, download and unzip USPL GUI 2.5.zip to a memorable area in you pc. (I suggest you create a special folder, name it Blackstone Flashing, or whatever memorable term comes to your mind)